Combustion Analyzers, Testo

0554 9770 Probe Tube Flexible, 330 mm by Testo

In measurements on heating system burners, obstructed measurement areas can occur (e.g. due to sloping roofs, cramped basement rooms). In these cases, the usual straight flue gas probes can only be inserted into the flue with great difficulty. With flexible flue gas probes made of metal, there is a danger that the probe shaft is over-bent, and can break.

Our flexible probe shaft offers the ideal solution to this problem: It is made of very flexible plastic, and can thus be bent easily without breaking. This allows you to carry out flue gas measurements without any problems, at any measurement site.

• For flue gas measurements on heating system burners
• Extremely flexible plastic probe shaft
• Used for measurements at difficult-to-access measurement sites
• Attachable to modular flue gas probes

Our flexible probe shaft helps you to carry out flue gas measurements on difficult-to-access measurement area. Since the probe shaft is made of very flexible plastic, you can easily bend it, allowing it to be inserted into exhaust flues which are obstructed (e.g. by sloping ceilings)

Delivery Scope

Flexible probe shaft for attachment to modular flue gas probes.

0560 3162 316-1 Gas Leak Detector with Flexible Probe by Testo

If you like to keep things simple, we recommend the testo 316-1 gas leak detector: Identifying and locating leaks or even reading off concentration values in ppm or %LEL (lower explosive limits) are all exceptionally easy. No training required thanks to the intuitive traffic-light scale on the head and the display illumination.

The testo 316-1 gas leak detector makes it particularly easy to identify and locate leaks. The multicolor LED on the sensor head and the multicolor display, as well as the flexible probe for hard-to-reach places, support you intuitively and precisely in leak detection.

• Acoustic and visual alarm via multi-color LED on the sensor head
• Display of ppm / vol% / %LEL on the instrument
• Sensor self-test and automatic zeroing
• Flexible probe for locations that are difficult to access

0563 0004 Hydronic Heating Smart Probe Set (incl. 510i, 805i, 115i) by Testo

The testo Hydronic Heating System Smart Probe Set contains three instruments designed for use on a hydronic heating system to determine gas flow and static pressure, measure temperature of radiators with an IR probe, and to measure pressure leak-down tests in piping systems. The instruments can be used simultaneously and read through your smart device using the testo Smart Probes App. The kit comes with a handy case at a great value.

The testo Smart Probes App is a powerful and easy-touse tool. It allows you to remotely read measurements from up to six (6) Smart Probes and easily document/report the results. Automatic calculations make it a snap!

All measurement data is displayed as instrument readings, tables, or graphs. The measurements can be quickly saved as PDF or Excel files. The App creates custom reports which can be saved and/or shared by email. All your data can be stored and retrieved saving you hours of time consuming paperwork!

• Measures manifold gas pressure, pressure drop, air flow, (with optional pitot tube), pipe and radiator temperatures
• Perform timed pressure leak-down tests on pipe systems
• Measures temperature of pipes in heating and cooling systems with accurate and stable NTC temperature sensor
• Photograph objects with smart device, capturing measurement marker and temperature values for reference and reporting (805i)
• Measurement data is transmitted to the convenient and powerful testo Smart Probes App in your smart device
• Tough, accurate, and easy-to-use
• For all HVAC/R technicians and contractors

0563 3000 71 330i Kit #1 - O2 & CO (with Bluetooth & Dilution) (No display - Download Free App) by Testo

The testo 330-1 LX, testo 330-2 LX and testo 330i LX flue gas analyzers set the standard in flue gas testing. All 330 analyzers feature long life O₂ and CO sensors that come standard with a 4 year warranty. These three measuring instruments meet the highest requirements regarding quality, precision and reliability. Numerous measurement menus and intuitive operation make your daily work easier than ever before.

The comprehensive flue gas probe selection and other accessories from Testo eliminate the need to purchase an additional instrument.

In addition, all 3 combustion analyzers include Bluetooth and a free testo App, enabling wireless connection to your smart device for remote operation and paperless documentation.

• Measures O₂, CO (330-1 LX up to 4,000 ppm; 330-2 LX /330i LX up to 8,000 ppm), Nitric Oxide (optional sensor), diff. pressure, draft, ambient, and flue temperatures
• Dilution to 30,000 ppm CO (testo 330-2 LX / testo 330i LX)
• Calculates CO₂, efficiency, excess air, CO air free
• Longlife sensors with 4 year warranty
• In-stack zeroing (330-2 / 330i only) feature eliminates climbing the stack to remove the probe and zero the instrument before restarting measurment.
• testo Bluetooth / App for operation and documentation via smart device

Kit Includes:

• 330i Combustion Analyzer w/ Bluetooth (BT) & auto CO dilution (No display - Download Free App*)
• 0600 9781 - Flue gas probe modular (5/16" dia., 12" long, 2ft hose)
• 0554 1096 - Power supply / recharger (North American cord)
• 0516 3302 - Carrying case
• 0554 3385 - Spare particle filter, 10 pack
• 0554 3006 - testofix, probe fixation for 5/16" dia. flue gas probe

0563 3000 72 330i Kit #3 - O2 & CO (with Bluetooth & Dilution) Upgrade Kit (No display - Download Free App) by Testo

Kit Includes:

• 330i Combustion Analyzer w/ Bluetooth (BT) & auto CO dilution (No display - Download Free App*)
• 0554 1096 - Power supply / recharger (North American cord)
• 0516 3302 - Carrying case
• 0554 3385 - Spare particle filter, 10 pack

0563 3100 310 Residential Analyzer Kit by Testo

The testo 310 has two measurement cells for O2 and CO, and a temperature sensor integrated into the flue gas probe. The gas sensors measure the exact oxygen and carbon monoxide content as well as the flue gas and ambient temperature. From these data, all relevant measurement parameters such as CO2 value, degree of effectivity and flue gas loss are calculated. The instrument stands out thanks to its easy handling and simple menu structurey. You can read off the measurement values confidently and conveniently from the well-lit display, even in bad light conditions. The fuels are stored not just as numbers, but are each described. At the top edge of the clear display, the symbols for the different measurement menus are always in view. The display and the dirt-insensitive keypad are clearly structured. Operation is very easy even if you only have one hand free.

Kit Includes:

• testo 310 analyzer
• probe & hose
• silicon tubing
• extra particulate filters (5)
• pressure plugs (5)
• AC power supply/recharger (USB)
• calibraton certificate
• hard case

• Robust and light instrument for daily use
• 30 seconds sensor zeroing
• O2 and CO measurement
• Integrated magnets for easy fixing to burner

Applications:

• Flue gas measurement
• Draught measurement
• Ambient CO measurement
• Pressure measurement

0563 3100 01 310 Residential Analyzer Kit by Testo

The testo 310 has two measurement cells for O2 and CO, and a temperature sensor integrated into the flue gas probe. The gas sensors measure the exact oxygen and carbon monoxide content as well as the flue gas and ambient temperature. From these data, all relevant measurement parameters such as CO2 value, degree of effectivity and flue gas loss are calculated. The instrument stands out thanks to its easy handling and simple menu structurey. You can read off the measurement values confidently and conveniently from the well-lit display, even in bad light conditions. The fuels are stored not just as numbers, but are each described. At the top edge of the clear display, the symbols for the different measurement menus are always in view. The display and the dirt-insensitive keypad are clearly structured. Operation is very easy even if you only have one hand free.

Kit Includes:

• testo 310 analyzer
• probe & hose
• silicon tubing
• extra particulate filters (5)
• pressure plugs (5)
• AC power supply/recharger (USB)
• calibraton certificate
• hard case

• Robust and light instrument for daily use
• 30 seconds sensor zeroing
• O2 and CO measurement
• Integrated magnets for easy fixing to burner

Applications:

• Flue gas measurement
• Draught measurement
• Ambient CO measurement
• Pressure measurement

0563 3104 01 310 II - Flue Gas Analyzer by Testo

The new testo 310 II flue gas analyzer combines simple functions with a high level of measurement accuracy, and is perfect for all basic measurements on heating systems. Long battery lifetimes of more than eight hours guarantee the analyzer is ready. Simultaneous, individual measurement and display of the measurement parameters in the instrument's high-resolution display are easily possible. The display can be easily configured via the testo Smart App and translates to the 310 II. Its easy handling and compact design make the testo 310 II a robust tool for daily work – even when things get rough.

The printer with Bluetooth® interface, specially developed for the testo 310 II, allows you to create clear reports on site as required. The current measurement value can be printed out of any measurement menu during or after the measurement. Via the simple connection to the testo Smart App, further measurements as well as digital documentation, data transfer and digital customer data management can be performed simultaneously. The testo 310 II offers all advantages of electronic flue gas measurement in high quality at a perfect cost-benefit ratio.

• Simultaneous, individual measurement and display of all relevant measurement parameters (O2, CO, CO2, flue gas and ambient temperature, CO environment, draft and pressure). Display configurable via the testo Smart App.
• Simultaneous, additional measurements via the testo Smart App (e.g. gas flow pressure, flow and return temperature)
• Easy and intuitive menu guidance
• Data documented and sent digitally via testo Smart App
• Digital customer data management via testo Smart App
• Rechargeable lithium battery for over 8 hours of operation
• Robust construction
• Sensor zeroing in 30 seconds

0563 3105 01 310 II - Flue Gas Analyzer with Printer by Testo

The new testo 310 II flue gas analyzer combines simple functions with a high level of measurement accuracy, and is perfect for all basic measurements on heating systems. Long battery lifetimes of more than eight hours guarantee the analyzer is ready. Simultaneous, individual measurement and display of the measurement parameters in the instrument's high-resolution display are easily possible. The display can be easily configured via the testo Smart App and translates to the 310 II. Its easy handling and compact design make the testo 310 II a robust tool for daily work – even when things get rough.

The printer with Bluetooth® interface, specially developed for the testo 310 II, allows you to create clear reports on site as required. The current measurement value can be printed out of any measurement menu during or after the measurement. Via the simple connection to the testo Smart App, further measurements as well as digital documentation, data transfer and digital customer data management can be performed simultaneously. The testo 310 II offers all advantages of electronic flue gas measurement in high quality at a perfect cost-benefit ratio.

• Simultaneous, individual measurement and display of all relevant measurement parameters (O2, CO, CO2, flue gas and ambient temperature, CO environment, draft and pressure). Display configurable via the testo Smart App.
• Simultaneous, additional measurements via the testo Smart App (e.g. gas flow pressure, flow and return temperature)
• Easy and intuitive menu guidance
• Data documented and sent digitally via testo Smart App
• Digital customer data management via testo Smart App
• Rechargeable lithium battery for over 8 hours of operation
• Robust construction
• Sensor zeroing in 30 seconds

0563 3371 70 330-1G Long Life Kit #1 - Residential Analyzer Kit (with case) by Testo

Thanks to the new instrument functions, the Testo flue gas analyzers of the new testo 330-LL series now offer you even more professional and reliable support.

Kit Includes:

• 0632 3306 00 - 330-1G LL Combustion Analyzer
• 0600 9763 - 12" flue gas probe, 1/4" dia., w/ 7' hose
• 0554 1096 - Power supply / recharger (North American cord)
• 0554 3385 - Particle filters - pack of 10
• 0516 3330 - Standard case

• Graphic processing of measurement data
• Instrument diagnosis function uses easy "traffic light" presentation to enable comprehensive instrument diagnosis
• Pressure measurement up to 300 mbar
• User-defined fuels
• TÜV-tested according to 1. BImSchV / EN 50379 Part 2 for O2, °C, hPa and CO with H2-compensation
• Powerful memory management: 500,000 readings
• IrDa/ Bluetooth interface for data transfer to Pocket-PC / laptop / printer
• USB interface for data readout to a PC software
• ZIV (Central Guild Association) driver for all standard industry software packages

0563 3372 71 330-2G Long Life Kit #1 - O2 & CO (w/dilution) - Commercial / Industrial Combustion Kit by Testo

Thanks to the new instrument functions, the Testo flue gas analyzers of the new testo 330-LL series now offer you even more professional and reliable support.

Kit Includes:

• 0632 3307 51 - 330-2G LL Combustion Analyzer w/ auto CO dilution
• 0600 9763 - 12" flue gas probe (932º max) , 1/4" dia., w/ 7' hose
• 0515 0107 - Li-Ion battery (extra)
• 0554 1096 - Power supply / recharger (North American cord)
• 0554 3385 - Particle filters - pack of 10
• 0516 3330 - Standard case

• Graphic processing of measurement data
• Instrument diagnosis function uses easy traffic light presentation to enable comprehensive instrument diagnosis
• Pressure measurement up to 300 mbar
• User-defined fuels
• TÜV-tested according to 1. BImSchV / EN 50379 Part 2 for O2, °C, hPa and CO with H2-compensation
• Powerful memory management: 500,000 readings
• IrDa/ Bluetooth interface for data transfer to Pocket-PC / laptop / printer
• USB interface for data readout to a PC software
• ZIV (Central Guild Association) driver for all standard industry software packages
• In CO measurement, from 8.000 ppm, automatic dilution is carried out up to min. 30,000 ppm CO
• Integrated gas and draught zeroing without probe removal: The probe can remain in the flue during zeroing