Testo

0572 9001 Penetration Probe TC with Ribbon Cable, Type K, Cable Length 2 m, IP 54 by Testo

This thermocouple (TC) temperature probe with penetration tip can be used for measurements in pastes and semi-solid media and also for measurements in liquids and air.

The temperature probe features a thin, 2 m long ribbon cable. The thin ribbon cable can also be placed through narrow openings such as slits in doors or refrigerator seals.

Protection class IP 54 means that the temperature probe with penetration tip is protected against spray water.

This Type K, Class 1 thermocouple probe has a standardized accuracy of ±2.7 °F (±1.5 °C).

The temperature probe's response time t99 (time it takes for the probe to register 99% of the jump in temperature) of 7 seconds refers to measurements in moving water at 140 °F (+60 °C). This response time is extended when, for example, measurements are taken in still liquid, pastes or air.*

The perfect probe for any application

Don't see the temperature probe you are looking for? Please contact us directly. We have a large range of standard temperature probes and we also manufacture customized probes specifically according to your personal requirements.

* For air temperature measurements, the response time is about 40 - 60 times higher than the indicated value measured in water. If you should require a rather sluggish temperature probe to measure air temperature, this probe is particularly suitable because it does not take brief temperature peaks into account at all, or only to a very small degree, when measuring temperature. For example, if you are planning to use the temperature probe with penetration tip to measure air temperature in the refrigerator, briefly opening the refrigerator door would not take into account the temperature fluctuation which results from mixing the warm room temperature with the refrigerator temperature.

If you need an air temperature probe with a fast response time, your best choice would be the exceptionally fast temperature probe 0602 0493 which has a large measuring range.

• TC Type K temperature probe with exceptionally flat cable, which can be pushed through narrow openings, e.g. through slits in doors
• Temperature measurement in pastes and semi-solid media and also in liquids and air
• Measuring range: -40 to 428 °F (-40 to +220 °C)

Includes:

1 x TC Type K temperature probe with penetration tip 0572 9001, can be connected to the testo Saveris 2-T3 Wi-Fi data logger

0560 1108 110 NTC Thermometer by Testo

The highly accurate, versatile testo 110 temperature measuring instrument is ideal for applications in rough conditions on account of its protective case, TopSafe. The engineering used is specially designed for measurements in refrigerated store rooms, cabinets and for outdoors. Minimum and maximum values are shown on a clear 2 line, backlit display or, if required, are printed on site on a Testo printer. In addition to the wide range of standard handheld probes available (optional), a wireless radio probe can be used simultaneously.

• Wireless measurement with radio probes possible (optional)
• Measurement data printout on site on Testo fast printer (optional)
• TopSafe, the indestructible protective case (optional)
• Audible alarm (adjustable alarm limits)
• Displays max/min readings in 2 line, backlit display
• Minimum/maximum value memory
• Large backlit display
• Auto-Hold automatically recognises full-scale value

0560 8051 805 Mini IR Thermometer by Testo

The compact 80 mm infrared thermometer fits into any pocket and is always within reach e.g. for measurements in Incoming goods and for checking the cold shelves in supermarkets. Also ideal for rapid measurements in the food industry and in the home.

• High accuracy in a critical area for food
• Packaging remains undamaged
• TopSafe is dishwasher-proof
• Display of minimum and maximum values
• Scan mode for permanent measurement
• Robust, waterproof protection case (IP65), optional
• Practical and compact, pocket-size
• High accuracy in the critical range for food
• Water-proof and robust on account of dishwasher-safe protection sleeve TopSafe (IP65)
• Minimum and maximum value display
• Scan mode for long-term measurements

0563 4352 435-2 Multifunction Meter with memory & software by Testo

The measuring instrument for ambient air conditions, for assessment of Indoor Air Quality and adjusting and testing VAC systems, stands out on account of its efficient measurement process. Probe-controlled menus and selectable user profiles, e.g. for duct measurement or long-term measurement, ensure the user-friendliest operation possible. The new IAQ probe measures Indoor Air Quality by measuring the CO2 level, air moisture and air temperature. In addition, the lux probe and comfort level probe can be connected to assess draught air. Clear analysis and archiving ensure practical PC documentation. Temperature and humidity measurement is integrated in the new thermal probe. The special flow protocol professionally documents duct measurements. It is also possible to connect additional temperature and humidity probes. Readings from up to 3 temperature or humidity probes can be clearly displayed in the measuring instrument; data transmission is by radio, i.e. wireless.

• Instrument memory for 10,000 readings
• PC software for analysis, archiving and documenting data
• IAQ probe, lux probe and comfort level probe
• Vane measurement and thermal probes
• Radio probes for temperature and humidity
• Protection class IP54

0563 4354 435-4 Multifunction Meter with memory, software & integral differential pressure by Testo

The ambient air conditions measuring instrument, for asssessing Indoor Air Quality and tuning and testing VAC systems, stands out on account of its efficient measurement process. The user-friendly measuring instrument has the right measurement engineering for every application and different flow speeds; for example, thermal probes, vane or Pitot tube measurement. Probe-controlled menus and selectable user profiles, e.g. for duct measurement or long-term measurement, ensure the user-friendliest operation possible. The new IAQ probe measures Indoor Air Quality by measuring the CO2 level, air moisture and air temperature. In addition, lux and comfort level probes can be connected to measure draught air. Clear analysis and archiving ensure convenient documentation. Temperature and humidity measurement is built-in in the new thermal probe. The special flow protocol professionally documents duct measurements. It is also possible to connect additional temperature and humidity probes. Readings from up to 3 temperature or humidity probes can be displayed in the measuring instrument; data transmission is by radio, i.e. wireless.

• Instrument memory for 10,000 readings
• PC software for analysis, filing and documentation of measurement data
• IAQ probe, lux probe and comfort level probe
• Thermal probes, vane measurement and built-in differential pressure probe probe for Pitot tube measurement
• Radio probe for temperature and humidity
• Protection class IP54

0560 4101 410-1 Pocket Pro Air Velocity & Temperature Meter by Testo

testo 410-1 measures air speed and temperature. It is ideal for quick spot checks at air outlets on account of its integrated measurement with the 40mm vane. Timed mean calculation is possible. In addition to air speed and temperature, testo 410-2 also measures air moisture. Testo's very own, patented humidity sensor guarantees accurate readings. In this way, air conditions can be reliably checked.

• Flow velocity measuring instrument with temperature measurement
• Integrated measurement with 40 mm vane
• Timed mean value calculation
• Hold function and max./min. values
• Windchill calculation for outside areas (perceived temperature)
• Display illumination
• Protective cap for safe storage
• Including wrist strap, belt holder and calibration protocol

0563 6352 635-2 Compact Pro Thermohygrometer with Memory & Software by Testo

The instrument for measuring air moisture, material equilibrium moisture and pressure dewpoint in compressed air systems. Moisture characteristics can be recorded in the instrument memory and analysed and displayed in graphics or tables. Up to 3 temperature or humidity probes can be displayed in the testo 635-2 meter; data transmission is by radio i.e. wireless. Selectable user profiles, i.e. allocation of specific function buttons and menu-guide to an application enable intuitive operation. Material moisture can be displayed immediately on account of the special probe. Characteristics for different materials can be stored in ComSoft and transmitted to the instrument. testo 635 immediately displays the dewpoint difference between ambient air and the wall surface in the analysis of moisture on walls and ceilings. Precision probes up to -60°C tpd are available to check pressure dewpoint in compressed air systems. The humdity sensor developed by Testo has proven itself worldwide and has outstanding features in terms of precision, long-term stability, temperature resistance and robustness.

• Instrument memory for up to 10,000 readings
• PC software for analysis, filing and documentation of measurement data
• Measurement of air moisture, material equilibrium moisture, pressure dew point
• Radio probe for temperature and humidity
• Protection class IP54
• Direct display of material moisture due to freely settable characteristics curves (based on equilibrium humidity)
• Storage of single measurements or measurement series by measurement location
• Fast access to the most important functions via user profiles
• U-value probe connection option

0590 0010 Set 2mm Test Leads (90° plug) by Testo

These high-quality standard measuring cables with an angled plug and an 0.7 inch long tip can be attached to Testo clamp meters, Testo digital multimeters or other makes of multimeter. The rubber-coated grips of the standard measuring cables offer a secure hold and so ensure easy measurement of electrical parameters.

• CAT II 1000 V measurement category
• Tip Ø: 0.07 in.; tip length: 0.7 in.
• 1 set of measuring cables with angled plug

Includes:

1 set of standard measuring cables (angled plug), tip &Oslah;: 0.07 in.; tip length: 0.7 in.

400563 6352 635-2 Compact Pro Dewpoint (HPD) Kit by Testo

The instrument for measuring air moisture, material equilibrium moisture and pressure dewpoint in compressed air systems. Moisture characteristics can be recorded in the instrument memory and analysed and displayed in graphics or tables. Up to 3 temperature or humidity probes can be displayed in the testo 635-2 meter; data transmission is by radio i.e. wireless. Selectable user profiles, i.e. allocation of specific function buttons and menu-guide to an application enable intuitive operation. Material moisture can be displayed immediately on account of the special probe. Characteristics for different materials can be stored in ComSoft and transmitted to the instrument. testo 635 immediately displays the dewpoint difference between ambient air and the wall surface in the analysis of moisture on walls and ceilings. Precision probes up to -60°C tpd are available to check pressure dewpoint in compressed air systems. The humdity sensor developed by Testo has proven itself worldwide and has outstanding features in terms of precision, long-term stability, temperature resistance and robustness.

Kit Includes:

• 0563 6352 - 635-2 with memory & software
• 0636 9836 - Precision Press Dewpoint Probe
• 0516 0435 - Deluxe service case for Compact Pro

• Instrument memory for up to 10,000 readings
• PC software for analysis, filing and documentation of measurement data
• Measurement of air moisture, material equilibrium moisture, pressure dew point
• Radio probe for temperature and humidity
• Protection class IP54
• Direct display of material moisture due to freely settable characteristics curves (based on equilibrium humidity)
• Storage of single measurements or measurement series by measurement location
• Fast access to the most important functions via user profiles
• U-value probe connection option

Measuring Range: -20 to +70°C, 0 to 100 %RH

Measuring Range: -60 to +250°C

Measuring Range: -50 to +230 °C

0563 0465 465 Non-Contact Tachometer by Testo

Using testo 465, rpm can be easily measured without contact. Simply attach a reflector to the object to be measured and then point the visible, red light beam at the reflector and measure.

• Highly affordable
• Easy one-hand operation
• Storage of mean/max/min value, last reading
• Robust design on account of SoftCase (protective case)
• Measurement distance up to 600 mm

Measuring Range: 58 to 572°F

Measuring Range: -0 to +40°C, 0 to 100 %RH