Combustion Analyzers, Testo

0564 3004 79 300 Residential / Commercial Analyzer Kit (O₂ & CO installed) by Testo

Truly smart combustion analysis: that is what the testo 300 stands for. The compact combustion analyzer is fully operated via the large touch display - you can see all the measuring values without scrolling. The scratch-resistant screen in embedded in a robust housing which remains reliable even in tough day-to-day working conditions. Menus for the most important measurements are already stored in the testo 300 and reliably guide you through the relevant application.

The combustion analyzer is not familiar with waiting times or start-up phases, it is immediately ready to go at the touch of a button in standby mode. Documentation is dealt with just as quickly with the testo 300, reports can be created and sent directly on site, with WiFi connection The testo 300 is available with a 2-year or 4-year warranty. There is also an optional NOx sensor available (with 2 year sensor warranty).

The O₂ sensor, is extremely durable and in Longlife models, an optional automatic dilution up to a maximum of 30,000 ppm CO protects the CO sensor.

• Large scratch-resistant 5" HD display with smart-touch operation and replaceable protective film
• Stored, intuitive menus for all relevant measurements
• 4 strong magnets with rubber coating for material friendly mounting
• Ready to measure at the touch of a button in standby mode
• Optional: extremely durable O₂ sensor and automatic dilution up to 30,000 ppm CO
• E-mailing of reports directly on site

Kit Includes:

• testo 300 O2, CO 4.000 ppm
• 12" flue gas probe with 5' hose, 932°F
• Spare part filters (10)
• testo Bluetooth printer, 0554 0568 - Spare thermal paper
• testo 300 Soft Case
• easyheat PC analysis software

0564 3004 93 300 Commercial Analyzer Kit with printer (O₂ & CO installed. Field upgradable for NO) by Testo

Truly smart combustion analysis: that is what the testo 300 stands for. The compact combustion analyzer is fully operated via the large touch display - you can see all the measuring values without scrolling. The scratch-resistant screen in embedded in a robust housing which remains reliable even in tough day-to-day working conditions. Menus for the most important measurements are already stored in the testo 300 and reliably guide you through the relevant application.

The combustion analyzer is not familiar with waiting times or start-up phases, it is immediately ready to go at the touch of a button in standby mode. Documentation is dealt with just as quickly with the testo 300, reports can be created and sent directly on site, with WiFi connection The testo 300 is available with a 2-year or 4-year warranty. There is also an optional NOx sensor available (with 2 year sensor warranty).

The O₂ sensor, is extremely durable and in Longlife models, an optional automatic dilution up to a maximum of 30,000 ppm CO protects the CO sensor.

• Large scratch-resistant 5" HD display with smart-touch operation and replaceable protective film
• Stored, intuitive menus for all relevant measurements
• 4 strong magnets with rubber coating for material friendly mounting
• Ready to measure at the touch of a button in standby mode
• Optional: extremely durable O₂ sensor and automatic dilution up to 30,000 ppm CO
• E-mailing of reports directly on site

Kit Includes:

• testo 300 O2, CO 4.000 ppm, NO ready
• 12" probe, 1/4" diameter, 7' teflon hose assembly, t max=932°
• Spare part filters (10)
• testo Bluetooth printer, 0554 0568 - Spare thermal paper
• testo 300 Hard Case
• easyheat PC analysis software

0564 3004 96 300 Commercial / Industrial Combustion Analyzer Kit with printer (O₂, CO, NO installed) by Testo

Truly smart combustion analysis: that is what the testo 300 stands for. The compact combustion analyzer is fully operated via the large touch display - you can see all the measuring values without scrolling. The scratch-resistant screen in embedded in a robust housing which remains reliable even in tough day-to-day working conditions. Menus for the most important measurements are already stored in the testo 300 and reliably guide you through the relevant application.

The combustion analyzer is not familiar with waiting times or start-up phases, it is immediately ready to go at the touch of a button in standby mode. Documentation is dealt with just as quickly with the testo 300, reports can be created and sent directly on site, with WiFi connection The testo 300 is available with a 2-year or 4-year warranty. There is also an optional NOx sensor available (with 2 year sensor warranty).

The O₂ sensor, is extremely durable and in Longlife models, an optional automatic dilution up to a maximum of 30,000 ppm CO protects the CO sensor.

• Large scratch-resistant 5" HD display with smart-touch operation and replaceable protective film
• Stored, intuitive menus for all relevant measurements
• 4 strong magnets with rubber coating for material friendly mounting
• Ready to measure at the touch of a button in standby mode
• Optional: extremely durable O₂ sensor and automatic dilution up to 30,000 ppm CO
• E-mailing of reports directly on site

Kit Includes:

• testo 300 O₂, CO, dilution 30.000 ppm, NO
• 12" probe, 1/4" diameter, 7' teflon hose assembly, t max=932°
• Spare part filters (10)
• testo Bluetooth printer, 0554 0568 - Spare thermal paper
• testo 300 Hard Case
• easyheat PC analysis software

0600 9770 Flue Gas Probe Flexible, 330 mm by Testo

In measurements on heating system burners, obstructed measurement areas can occur (e.g. due to sloping roofs, cramped basement rooms). In these cases, straight flue gas probes can only be inserted into the flue with great difficulty. With flexible flue gas probes made of metal, there is a danger that the probe shaft is over-bent, and can break.

Our flexible flue gas probe offers the ideal solution to this problem: The probe shaft is made of flexible plastic, and can thus be bent very easily without breaking. This allows you to carry out flue gas measurements without any problems, at any measurement site.

• For flue gas measurements on heating system burners
• With extremely flexible plastic probe shaft
• Used for measurements at difficult-to-access measurement sites
• Connectable to flue gas analyzer by bayonet fitting

Our flexible flue gas probe helps you to carry out flue gas measurements even on difficult-to-access measurement areas. Since the probe shaft is made of very flexible plastic, you can easily bend it, allowing it to be inserted into exhaust flues which are obstructed (e.g. by sloping ceilings)

Delivery Scope

Flexible flue gas probe, connectable to the flue gas analyzer by bayonet fitting.

0600 9799 Short Air Probe by Testo

The combustion air temperature probe can be positioned flexibly, because it features a 190 mm long probe shaft and a 2.2 m cable. A cone for attachment is included.

• Flexible positioning (immersion depth 190 mm, cable length 2.2 m)
• Cone for attachment included
• Measuring range: 0 to +100 °C

The probe is used for the specific measurement of combustion air temperature within the context of flue gas or particulate matter measurements.

Delivery Scope

Combustion air temperature probe with 190 mm probe shaft including cone for attachment.

0615 1212 Waterproof Immersion/Penetration Probe with NTC Temperature Sensor by Testo

For precise temperature measurements: Use the waterproof immersion/penetration probe with a compatible measuring instrument (please order separately) for carrying out temperature measurements in liquids and semi-solid media.

Waterproof immersion/penetration probe - equipment and areas of application

Use the fixed cable to connect the immersion/penetration probe to the measuring instrument (please order separately). The immersion/penetration probe is equipped with a high-quality NTC sensor, is easy to use and features high measuring accuracy of up to ±0.2 °C.

The waterproof immersion/penetration probe is designed for temperature measurements in liquids and semi-solid media and offers numerous application options. For example, it is ideal for measuring the temperature of water and for carrying out sophisticated temperature measurements in the area of food production.

• Measuring range from -50 to +150 °C; accuracy of up to ±0.2 °C
• For measurements in liquids and semi-solid media
• Temperature probe with NTC temperature sensor
• Waterproof - in accordance with protection class IP67

Includes:

Waterproof immersion/penetration probe (NTC) with fixed cable (cable length 1.3 m).

0615 4611 Pipe Wrap Probe NTC by Testo

For simple temperature measurements: use the temperature probe with Velcro with the compatible measuring instrument (please order separately) to measure the surface temperature of pipes.

Temperature probe with Velcro (NTC) - features and areas of application

Use the fixed cable including TUC connector to connect the pipe wrap probe (NTC) to the compatible measuring instrument. The temperature probe features a high-quality NTC sensor, which is attached to a 300 mm long strip of Velcro.

The temperature probe is designed for measuring the surface temperature of pipes and offers numerous application options. Thanks to the Velcro, it can be attached quickly and easily to pipes up to 75 mm in diameter. The temperature probe is therefore ideal for carrying out temperature measurements on water pipes or on the flow and return pipes of heating systems.

• Measuring range from -50 to +70 °C
• With Velcro, for easy attachment of the temperature probe to pipes up to 75 mm in diameter
• Temperature probe with NTC temperature sensor

Use the temperature probe with Velcro (NTC) (with the compatible measuring instrument) to carry out fast, easy measurements of the surface temperature of pipes.

Delivery Scope

1 x temperature probe with Velcro (NTC) with fixed cable (cable length 1.4 m).

0615 5505 Clamp Probe with NTC Temperature Sensor for Measurements on Pipes (Ø 6-35 mm) by Testo

For fast, precise temperature measurements: use the clamp probe (NTC) with the compatible measuring instrument (please order separately) to measure the surface temperature of pipes.

Clamp probe (NTC) - equipment and areas of application

Use the fixed cable to connect the clamp probe (NTC) to the measuring instrument (please order separately). The clamp probe is equipped with a high-quality NTC sensor and is easy to use.

The clamp probe (NTC) is designed for measuring the surface temperature of pipes (pipe diameters from 6 to 35 mm) and offers numerous application options. For example, it is ideal for measuring flow and return temperatures on heating systems or for detecting superheating/subcooling on refrigeration systems.

• Measuring range from -40 to +125 °C
• Collet for quick attachment of the surface probe to pipes
• Temperature probe with precise NTC temperature sensor

Includes:

Clamp probe (NTC) for temperature measurements on pipes (Ø 6-35 mm) with fixed cable (cable length 1.4 m).