$200 - $300, Test and Measurement

645NPT Dual Input Differential Manometer by Test Products International

Dual Differential Input Manometer with ± 29 psi range and 0.1 psi resolution. Seven units of pressure: inH2O, mbar, KPa, PSI, mH2O, mmHg, inHg, Auto power off, Record/Min/Max, Backlight display, Zero function, Trim mode to stabilize readings. 1/4" NPT fittings.

The TPI 600 Tuffman series is a hand held range Of pressure meters and can be summarized as follows:

• TPI 635 5 PSI pressure range
• TPI 645 30 PSI pressure range
• TPI 655 100 PSI pressure range

All of these models are dual input differential pressure meters with 7 selectable scales to choose from: mbar, kPa, PSI, inHg. mmHg,inH20, and mH20.

Features

• Differential input with + 29 PSI range
• Dual 1/4" NPT Fittings
• Seven units of measure (mbar, kPa, PSI, mmHg, inHg, mH2O, inH2O)
• Display - 4 digit dual line with backlight
• Smooth - Stabilizes display when measuring fluctuating pressures
• Data Hold - Freezes reading on display
• Min / Max - Records Min/Max readings
• Auto Off - Conserve battery power.

Standard Accessories (Included)

• 9V alkaline battery (A009A)
• Replacement tubing (A601)

665 Manometer with Data Logging by Test Products International

Dual Input Differential Manometer with ± 100 psi range and 0.01 psi resolution. Data logging with optional A665 software and docking station. Seven units of pressure: inH2O, mbar, KPa, PSI, mH2O, mmHg, inHg, Auto power off, Record/Min/Max, Backlight display, Zero function, Trim mode to stabilize readings. 1/4" NPT fittings.

The slim design 665 is a hand-held, differential input manometer with data logging capability. Digital filter, min/max, one touch zero, and backlight display are just a few of the features of the 665.

Features

• Differential input with + 29 PSI range
• Seven units of measure (mbar, kPa, PSI, mmHg, inHg, mH2O, inH2O)
• Data Logging: Record test data with time stamp and display with optional software
• PC Communication: IR to USB Interface and PC Application software (optional p/n A665)
• Display: 4 digit dual line with backlight
• Printing: Print test results directly to the optional A740 IR printer
• Data Hold: Freezes reading on display
• Min / Max: Records Min/Max readings
• Auto Off: Conserve battery power.

Standard Accessories (Included)

• Two 1.5 Volt Alkaline Battery (A002)
• Protective Boot with magnets (A614)

721 Combustible Gas Leak Detector with LCD Display by Test Products International

The 721 offers 10ppm sensitivity to detect combustible gasses. Easily operated with one hand, leaks are pinpointed using the audio and visual indicators. An adjustable tic rate helps eliminate background gas concentration in contaminated environments.

The ergonomically designed 721 is a hand-held, combustible gas leak detector. It is capable of finding combustible gas leaks in pipes, fittings, regulators, etc. Additional features include the capability to display %LEL, leak level in ppm, and user adjustable alarm point.

Features

• Combustible Gas Leak Detector capable of displaying real ppm, stepped ppm, and %LEL (Lower Explosive Limit).
• 10ppm sensitivity (methane)
• Detect combustible gases including natural gas, propane, butane, etc.
• Thumbwheel adjustable tic rate to locate leaks quickly and accurately
• Two line display with bargraph and backlight
• Audio / Visual alarm indication with user adjustable alarm point
• Earphone jack for use in noisy environments
• Approximately 20 hours of continuous use (C cell alkaline batteries x2)

Applications

• Detect combustible gasses including natural gas methane, propane (LPG), gasoline, diesel, and kerosene
• Trace natural gas lines and fittings for leaks
• Check gas generation for leaks

Standard Accessories

• Carrying Pouch (A780)
• Instruction Manual
• Battery and Sensor (Installed and Calibrated)

770 Carbon Monoxide Monitor by Test Products International

The 770 CO Single Gas Monitor is a state-of- the-art Carbon Monoxide Instrument designed to measure Carbon Monoxide in ambient air and to perform a carbon monoxide build up test . It has a measurement range of 0 to 999 ppm (parts per million) and displays the readings in 1ppm increments.

The unit features a personal audible and visual alarm, which is factory set at 30ppm CO but can be changed in the field to keep current with government legislation.

Other features include: maximum reading hold, elapsed time and manual zero. The audible alarm may be switched on and off as required. Battery changing is made easy by use of a simple slide off battery compartment cover.

The detector uses an advanced electrochemical sensor that measures Carbon Monoxide and should not be used for any other purpose.

When the audible alarm is switched off a small 'double speaker' symbol will be displayed at the bottom left of the LCD. When the alarm setting is exceeded a 'warning' symbol is displayed at the bottom center of the screen and the red warning indicator is illuminated. As the battery level approaches 2 volts a 'BAT' warning symbol is displayed to indicate low battery level. When the battery level gets too low the unit will automatically switch off.

Features

• Measure CO from O to 999ppm
• Displays the max. CO reading in PPM since power on
• Displays in hours and minutes, time elapsed since power on
• Displays user set value of audible and visual alarm
• The audible alarm can be switched on and off by pressing the SEL button

Applications

• Ambient CO safety checks

A254 AC/DC Amp Low Current Probe Adapter by Test Products International

Most TPI brand and any competitor DMM, clamp-on or oscilloscope having the capability of measuring up to 2000mV AC/DC (2V AC/DC), 10M Ohm input impedance, and equipped with industry standard spaced input jacks 19mm on center.

A620 Pressure Adapter by Test Products International

Most TPI brand and any competitor DMM, clamp-on or oscilloscope having the capability of measuring up to 2000mV AC/DC (2V AC/DC), 10M Ohm input impedance, and equipped with industry standard spaced input jacks 19mm on center.

SAIT200 Analog Insulation Resistance Tester (IRT) by Test Products International

TPI Insulation Resistance Testers are ideal for preventative maintenance and performing resistance tests. All TPI Insulation Resistance Testers include A085 UL listed silicone test lead set with screw on alligator clips and A073 test lead set with large alligator clips.

Features

• Easy to use
• Push button or locking operation
• Automatic discharge
• Built-in battery test
• Test Voltages: 250V/500V/1,000V
• Insulation Resistance: 100MΩ/200MΩ/400MΩ
• Continuity: 2Ω/20Ω
• Includes A085 UL listed silicone test lead set with screw on alligator clips and A073 test lead set with large alligator clips

Applications

• Cables
• Compressors
• Controls
• Distribution Transformers
• Generators
• Instruments
• Motors
• Windings
• Switchgear

Markets

• Electrical Power Generation
• Heavy Industry
• HVACR
• Mining
• Motor Repair Shops
• Natural Gas Transmission
• Oil Production
• Oil Pipelines
• Railroads
• Refining
• Steel Manufacturing
• Gathering facilities, compressor stations and pipelines

SDIT30 Digital Insulation Resistance Tester (IRT) by Test Products International

TPI Insulation Resistance Testers are ideal for preventative maintenance and performing resistance tests. All TPI Insulation Resistance Testers include A085 UL listed silicone test lead set with screw on alligator clips and A073 test lead set with large alligator clips.

Features

• Easy to use
• Push button or locking operation
• Automatic discharge
• Built-in battery test
• Test Voltages: 250V/500V/1,000V
• Insulation Resistance: 2,000MMΩ/2,000MΩ/2,000MΩ
• Continuity: 200Ω
• Includes A085 UL listed silicone test lead set with screw on alligator clips and A073 test lead set with large alligator clips

Applications

• Cables
• Compressors
• Controls
• Distribution Transformers
• Generators
• Instruments
• Motors
• Windings
• Switchgear

Markets

• Electrical Power Generation
• Heavy Industry
• HVACR
• Mining
• Motor Repair Shops
• Natural Gas Transmission
• Oil Production
• Oil Pipelines
• Railroads
• Refining
• Steel Manufacturing
• Gathering facilities, compressor stations and pipelines

SDIT300 Digital Insulation Resistance Tester (IRT) by Test Products International

TPI Insulation Resistance Testers are ideal for preventative maintenance and performing resistance tests. All TPI Insulation Resistance Testers include A085 UL listed silicone test lead set with screw on alligator clips and A073 test lead set with large alligator clips.

Features

• Easy to use
• Push button or locking operation
• Automatic discharge
• Built-in battery test
• Test Voltages: 250V/500V/1,000V
• Insulation Resistance: 20MΩ/200MΩ/2,000MΩ
• AC Voltage: 200V/600V
• Continuity: 20Ω/200Ω
• Includes A085 UL listed silicone test lead set with screw on alligator clips and A073 test lead set with large alligator clips

Applications

• Cables
• Compressors
• Controls
• Distribution Transformers
• Generators
• Instruments
• Motors
• Windings
• Switchgear

Markets

• Electrical Power Generation
• Heavy Industry
• HVACR
• Mining
• Motor Repair Shops
• Natural Gas Transmission
• Oil Production
• Oil Pipelines
• Railroads
• Refining
• Steel Manufacturing
• Gathering facilities, compressor stations and pipelines