$200 - $300, Test and Measurement

The Charger for Pen Dosimeters by SE International

The patented, handheld Charger can charge a variety of direct-reading dosimeters by simply squeezing the lever of a generator. The Charger requires no batteries. By pulling a trigger, a dosimeter is easily placed in or removed from the charger. The clamping action holds the dosimeter for you. NSN# 6665-00-856-8813 - CD V-750 Model 6

TPI-1200 BNC Attenuator Kit by Test Products International

Includes

• 805-53-000 BNC Shunt
• 120082 Individual BNC Attenuator, 3 dB 1.0 Watt
• 120083 Individual BNC Attenuator, 6 dB 1.0 Watt
• 120085 Individual BNC Attenuator, 20 dB 0.5 Watt
• 105-52-000 BNC Termination

120085 BNC Attenuator Kit by Test Products International

Features

• Increase the input range of an oscilloscope.
• Reduce the output level of fixed amplitude signal sources.
• Connect low impedance sources to instruments with high-impedance inputs.

Includes

• 120082 Individual BNC Attenuator, 3 dB 1.0 Watt
• 120083 Individual BNC Attenuator, 6 dB 1.0 Watt
• 120084 Individual BNC Attenuator, 10 dB 0.5 Watt
• 120085 Individual BNC Attenuator, 20 dB 0.5 Watt

194 True RMS 50,000 Count DMM with CAT IV, 1000V Rating with A106 and GK13M by Test Products International

The Triple Display 194 is an innovative new concept in DMM design. The unique display enables you to view more than one event at a time. This eliminates the hassle of switching back and forth to review minimum, maximum or preset comparative values. The meter is also easy to use and built to last.

The DMM 194 is a hand-held autoranging DMM. The backlit LCD can display three readings at one time. In addition to basic function of AC/DC V, AC/DC A, Ohm, Diode test, continuity, Capacitance, Frequency, there is the adaptor function. The meter also has RS232 output and software for recording information into a PC

Features:

• REC: Records Min/Max and Average readings during specified measurement intervals.
• COMP: Compare actual reading to preset HI and LOW value for Pass/Fail testing of component
• Hold: Tow hold system automatically holds the previous stable reading when a new one is obtained.
• Data logging
• 50,000 count display
• 0.05% DCV basic accuracy
• Inductance, Frequency and Capacitance
• 0 to 750 ACV; max resolution 100uV
• 0 to 1,000 DCV: max resolution 0.001mV
• 0 to 50MΩ; max resolution 0.01Ω
• Audible continuity
• AC/DC amps up to10 amps; resolution 0.01 uA
• Analog bar graph
• cULus 61010-1
• CATIII-1000VC, CATIII-1000V, CAT IV-600V, CAT III 1000V
• True RMS DMM
• Time Stamp Logging
• Optional PC Output with A192
• Pulse Width
• Duty cycle (% pulse width modulation) for measuring modulating gas valves

Applications:

• Thermocouples in furnaces or gas applications
• Heat anticipator current in thermostats
• Line voltage
• Control circuit voltage
• Flame safeguard control current
• Heating element resistance (continuity)
• Compressor winding resistance
• Contactor and relay coil resistance
• Continuity of wiring
• Motor start and run capacitance
• Frequency on controls and line voltages
• Record min/max voltage of controls and line voltages
• Temperature with optional temperature adapter (A310)
• Bar graph to indicate rapid fluctuations in measurements
• Voltage of direct drive DC motors
• Measure power supply voltage
• Match components
• Compare readings in circuits and components
• Frequency of line and control voltage

196 Process Meter by Test Products International

The Triple Display 196 is an innovative new concept in DMM design. The unique display enables you to view more than one event at a time. This eliminates the hassle of switching back and forth to review minimum, maximum or preset comparative values. The meter is also easy to use and built to last.

The DMM 196 is a hand-held autoranging DMM. The backlit LCD can display three readings at one time. In addition to basic function of AC/DC V, AC/DC A, Ohm, Diode test, continuity, Capacitance, Frequency, there is the adaptor function. The DMM 196 also has RS232 output and software for recording information into a PC.

Features:

• REC: Records Min/Max and Average readings during specified measurement intervals.
• COMP:Compare actual reading to preset HI and LOW value for Pass/Fail testing of component
• Hold: Tow hold system automatically holds the previous stable reading when a new one is obtained.
• Large 50,000 count display: increases resolution and improves accuracy (1.7" x 2.75", 43mm x 70mm)
• 0-24mA output: t for process controls
• Triple Display: shows more than one reading simultaneously
• 51 Segment Analog Bar Graph: to catch fast AC fluctuations
• Logic Test: Indicates transitions up to 2 MHz.
• Frequency Counter: Measure low frequency signals from 1Hz to 2 MHz and display duty cycle, pulse width and period.
• Back Light (LED Type) allows viewing in any light condition
• Auto Range automatically selects the best range for the measurement
• Separate battery and fuse compartment for easy replacement
• Auto Power Off DMM will automatically power down after approximately 15 minutes of inactivity to extend battery life. Disable Auto Power Off: Hold down the REC button and turn the meter on
• Increased safety with Silicone rubber 1,000V CAT III, 600V CAT IV, 10A test leads (CE & cUL listed)
• Diode Test displays approximate forward bias voltage
• Process DMM with 0 to 24mA output
• 0.05% DCV basic accuracy
• 0 to 750 ACV; max resolution 100uV
• 0 to 1,000 DCV: max resolution 0.001mV
• 0 to 50MΩ; max resolution 0.01Ω
• Audible continuity
• AC/DC amps up to10 amps; resolution 0.01 uA
• Analog bar graph
• cULus 61010-1

Applications:

• View industrial signals such as motor control, UPS, switching power supplies, and PLC controls with 1MHz bandwidth
• Capture noise spikes, glitches, and intermittents with 20 megasamples per second sampling rate
• Full autoranging, True RMS, DMM capabilities
• Measure resistance and test for continuity
• Continually updated display provides a live presentation
• Water Purification
• Chemical Processing
• Oil & Gas
• Power Generation
• Pulp & Paper
• Food & Beverage

343C5 Dual Input K-Type Thermocouple Thermometer with Two GK13M Probes and Two CK24M Probes A901 Carrying Case by Test Products International

TPI contact temperature testers are accurate, reliable, and built to last. Models 341K, 343 and 367D can be auto field calibrated to system accuracy (tester plus probe) of ± 1°F in less than 10 seconds in ice water.

Auto Field Calibration Perform ice bath calibration to achieve ±1°F system accuracy within the 30°F to 120°F temperature range. Calibration is an easy two-step process performed with instrument keypad, no additional tools needed.

Features:

• Auto Field Calibrate in less than 10 seconds in ice water to achieve ± 1°F system (tester & probe) accuracy within 30°F to 120°F temperature range
• Temp1, Temp2, Temp1-Temp2 display modes
• Min / Max Record
• Auto Resolution (0.1° / 1°)
• °C/°F Selectable
• Hold feature freezes reading on display
• Auto Off
• Protective rubber boot
• Easy to read LCD display

Includes:

• Two GK13M temperature probe
• A908 Case
• Two CK21M pipe clamp probes

377BT Infrared Thermometers (IR) With Bluetooth Comunication by Test Products International

Thoroughly testing and diagnosing high efficiency HVACR systems or large surface areas can be labor intensive and expensive. Using the appropriate non-contact thermometer can reduce man hours and help insure system performance more easily, accurately and affordably.

Measure Hard-to-reach, sensitive, or large moving target areas. Use the 380, 381, and 383 to measure surface temperature and watch the LCD immediately display accurate data without the use of a probe.

Features:

• Bluetooth Communication
• Laser pointer
• Record function (Min/Max)
• Display data hold function
• Back light
• Trigger switch
• 8:1 distance to spot ratio
• °C and °F selectable
• Gun-type compact design
• Operating lock function
• 9V battery and soft pouch included

Appications:

• Heating & AC/R system measurements on all non-metallic and many metallic surfaces
• Troubleshootoverheating devices
• Vent air and return temperature measurements
• Tubing, piping and sheet metal temperature

TPI-5000A Deluxe Adpater Connector Kit by Test Products International

TPI-3000A Universal Cables & Connector Kit. Technicians and engineers turn to TPI for their connecting needs. With the TPI-3000A and TPI-5000A kits, technicians can create connections on the spot in seconds.

Features

• Includes 11 types of connectors for male and female adapters
• Simply screw on any combination of 35 connectors to any of the six universal interfaces with no soldering or crimping needed
• Reusable connectors can be used over and over in different combinations to fit and assist customizing the installation
• Works with universal cables GEX-60 (36"), GEX-48 (48"), and GEX-75 (72")
• Connector bodies are silver-plated machine brass with Teflon insulation
• Hard plastic case protects and organizes the individual pieces

621C3 Dual Input Differential Manometer Kit by Test Products International

Differential input high resolution manometer with A612 protective boot, two A603 1/8" barbed NPT fittings, two A605 1/8" barbed T fittings, two A776 static tips, and A908 carrying case with shoulder strap.

The TPI 621C3 is a hand held pressure meter with superior resolution.

All of these models measure over the range of -40.0 to +120.0 mbar. Each unit has a resolution of 0.01 mbar to +19.00 mbar and automatically auto-ranges above ± 19.00 mbar to 0.1 mbar resolution. Each model is supplied complete with carry pouch, battery and instruction manual.

The 621C3 includes all of the specs of the Model 621 and additionally consists of the following:

• 621 Manometer: + A612 Boot with tilt stand
• A605 T Fitting (x2): Ideal for use on setting pressure switches
• A776 Static Tip (x2): Measure static pressure with A776. It has a magnet to secure in place in duct work 1/4" hole required to use
• A774 Tubing: 6 foot length of silicone tubing for pressure measurements. Very flexible and will not go hard in cold temperatures.
• A791 Adapter Tube: Flexible tubing for connecting to larger fittings
• A908 Carrying Case: Soft padded case with shoulder strap holds the thermometer and probes.

623 Dual Input Differential Manometer by Test Products International

The TPI 623 Dual Input Differential Manometer is a high accuracy hand held pressure meter with superior resolution.

The TPI 623 is a hand held pressure meter with superior resolution.

Features and Benefits

• 0.001 inH2O / kPa resolution up to +/-9.999 inH2O / kPa input
• Accuracy: ±0.02 inH2O (< 2 inH2O) ±1% (> 2 inH2O)
• Dual input differential
• Autoranging
• Seven selectable units of measure (mbar, kPa, PSI, mmHg, inHg, mmH2O, inH2O)
• Backlit Display

Applications

• Check for positive building pressure
• Perform room to room pressure diagnostics
• Test duct pressure and perform static pressure checks
• Adjust appliance regulators
• Test pressure switch operation on a 2-sage gas furnace in both positive and negative pressures

Standard Accessories (Included)

• 9V Alkaline battery (A009A)
• Soft Pouch (A600)
• Protective boot with magnets (A6XX)
• Silicone tubing with 1/4" barbed 1/8" NPT fitting (A603)

625 Dual Input Differential Manometer by Test Products International

Dual Differential Input Manometer with ±80 inH2O range and 0.01 in H2O resolution. Seven units of pressure: inH2O, mbar, KPa, PSI, mmH2O, mmHg, inHg, Auto power off, Record/Min/Max, Backlight display, Zero function, Trim mode to stabilize readings.

The TPI 625 is a hand held pressure meter with superior resolution.

All of these models measure over the range of -40.0 to +120.0 mbar. Each unit has a resolution of 0.01 mbar to +19.00 mbar and automatically auto-ranges above ± 19.00 mbar to 0.1 mbar resolution. Each model is supplied complete with carry pouch, battery and instruction manual.

Features:

• Dual input with ±80" H2O range
• Seven units of measure (mbar, kPa, PSI, mmHg, inHg, mmH2O, inH2O)
• Display - 4 digit dual line with backlight
• Smooth - Stabilizes display when measuring fluctuating pressures
• Data Hold - Freezes reading on display
• Min / Max - Records Min/Max readings
• Auto Off - Conserve battery power.

635 Dual Input Differential Manometer by Test Products International

Dual Differential Input Manometer with ± 5 psi range and 0.001 psi resolution. Seven units of pressure: inH2O, mbar, KPa, PSI, mH2O, mmHg, inHg, Auto power off, Record/Min/Max, Backlight display, Zero function, Trim mode to stabilize readings.

The TPI 600 Tuffman series is a hand held range Of pressure meters and can be summarized as follows:

• TPI 635 5 PSI pressure range
• TPI 645 30 PSI pressure range
• TPI 655 100 PSI pressure range

All of these models are dual input differential pressure meters with 7 selectable scales to choose from: mbar, kPa, PSI, inHg. mmHg,inH20, and mH20.

Features

• Dual input with ±80" H2O range
• Seven units of measure (mbar, kPa, PSI, mmHg, inHg, mmH2O, inH2O)
• Display - 4 digit dual line with backlight
• Smooth - Stabilizes display when measuring fluctuating pressures
• Data Hold - Freezes reading on display
• Min / Max - Records Min/Max readings
• Auto Off - Conserve battery power.

Standard Accessories (Included)

• 9V alkaline battery (A009A)
• Replacement tubing (A601)