ScichemTech

SCT-108.003.A5 Plastic Three-In-One Combination pH Electrode by ScichemTech

• Plastic three-in-one combination pH electrode
• Simultaneous measurement of pH and temperature
• Automatic Temperature Compensation
• BNC + RCA Plugs

SCT-108.002.46 SCT NEO UV-A Meter by ScichemTech

Includes:

• Sensor Probe
• User Manual
• Color Box
• Hard Carrying Case
• 9V Battery

Features:

• A complete portable SCT meter for intensity of ultra violet rays measurement (UV-A, C+AB)
• Backlight LCD and 4 digits dual display
• High and low measurements
• Range in a unit MW/cm2 or UW/cm2
• Socket of tripod mounting
• Automatic measuring
• Magnetic mount
• 20 points memory
• Battery operated with low battery indication.

SCT-108.002.53 SCT FRIDGE Portable Leak IS Detector by ScichemTech

Includes:

• User Manual
• Carrying Case
• Leak test bottle
• AC adapter
• Holster

Features:

• A complete SCT portable meter for refrigerant leak detection.
• Can detect all chloro fluro carbons (CFC)
• Sae J2791 compatability, HCFC and HFCS
• Three range of measurements 4g/7g & 14g
• With audio alarm
• Auto power shut-off in 10 minutes.
• Battery operated with low battery indication.

SCT-108.002.50 SCT SKYE Magnetic Field Meter by ScichemTech

Includes:

• 9V Battery
• Instruction Manual

Features:

• A complete portable SCT meter for magnetic field measurements.
• An electromagnetic wave simply means the wave motion of the electromagnetic field (EMF)
• This meter is applied to measuring electromagnetic fields of extremely low frequency (ELF) of 30hz to 300hz.
• It is capable of measuring the electromagnetic field radiation intensity that is produced from electric transmission equipment, power line, electric oven, air conditioner, refrigerator, computer monitor, video/audio device and so forth.
• The magnetic field unit is tesla (t), gauss(g), micro-tesla (ut) or milli-gauss(mg).
• Data hold, maximum hold, overload indication.
• Battery operated with low battery indication.

SCT-108.003.04 SCT BEN-pH-4 Benchtop GLP pH Meter by ScichemTech

SCT (GLP) good laboratory practice benchtop pH/ORP/Temp meter suitable for routine laboratory use.

Equipped with flexible electrode holder & quick operation guide easier to use.

Instrument rating 0.01.

Includes:

• Flexible electrode holder
• pH/ATC three-in-one combination electrode
• pH standard buffer solution 4.00, 7.00, 10.01(50 ml)
• 9v power adapter
• RS-232 communication cable
• Communication software CD
• Operation manual
• Packing list

Features:

• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Automatically recognize pH buffer solution. User can choose anyone from three series of standard buffer solutions: Europe & USA series, & NIST series
• SCT dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards

SCT-108.001.23 SCT-THYG-PEN-3 Jumbo Dual Display Thermo Hygrometer by ScichemTech

Features:

• Reliable SCT Pocket Type Meter for Humidity & Temperature measurements.
• Comfort / Warm / Cool index with Dual Display.
• Option to select °F/°C.
• Maximum/ minimum (°F /°C) temperature & humidity memory recalling
• 3 m sensor wire with probe for outdoor measurement
• Indoor / Outdoor Temperature & Humidity Display.
• Battery operated.
• With Flipout Stand

SCT-108.005.03 SCT-EC-MINI Conductivity Mini Controller by ScichemTech

Includes:

• Conductivity probe
• Fixation clamps
• Instruction manual

Features:

• SCT EC MINI online Conductivity controller is an panel Instrument for online monitoring of Industrial process conductivity
• Simple and compact design
• Three ranges of conductivity measurements in on single controller
• Range switch over and constant check can be easily adjusted from the rear panel.
• Unique signal collecting and processing technology.
• Special think film circuit for accurate measurement and stable operations.
• Linearized data and automatic temperature compensations.
• In line measurement and control of conductivity.
• Conductivity electrode is supplied with 5 meter cable.

SCT-108.003.05 SCT BEN-pH-5 Precision pH/ORP/Temp Meter by ScichemTech

SCT precision pH/ORP/Temp meter suitable for precise pH measurements for research and quality control.

(Resolution 0.001 pH)

Includes:

• Flexible electrode holder
• pH/ATC three-in-one combination electrode
• Glass pH combination electrode
• Temperature electrode
• pH standard buffer solution pH 4.00, 7.00, 10.01 (50 ml)
• 9v power adapter
• RS-232 communication cable
• Communication software CD
• Operation manual
• Packing list

Features:

• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Automatically recognize 12 kinds of pH buffer solution. User can choose anyone from four series of standard buffer solutions: Europe & USA series & NIST series.
• High purified water and ammonia added purified water ph measuring mode can be set up.
• With EH redox potential measuring mode can directly display ORP value which against standard potential of hydrogen electrode.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards

SCT-108.002.A1 pH Combination Electrode by ScichemTech

• Plastic Three-in-One combination pH electrode measure pH and temperature simutaneously
• ATC
• General measurement
• 8 pin connector

SCT-108.002.73 SCT XARIA Infrared Thermometer (High Performance With Adj. Emissivity) by ScichemTech

Includes:

• 9V DC Battery
• Instruction Manual
• Carrying Case

Features:

• A complete portable SCT meter for non contact temperature measurements.
• Temperature range: -50°C to 999°C
• Adjustable emissivity from 0.1 to 1.0
• Ultra low power consumption in shutdown mode.
• Extended long time measuring reliability.
• Laser sighting on/off is switchable.
• High DS ratio/max-min v/avg./∆t
• Backlight LCD display.
• Option to select °C/°F
• Electronic trigger lock.
• Auto measuring
• 10 points memory
• Battery operated.

SCT-108.003.F1 Reference Electrode by ScichemTech

• Reference electrode
• Suitable for routine measurements
• Banana plugs

SCT-108.002.04 SCT-BEA DO Meter by ScichemTech

Includes:

• DO Meter
• DO electrode
• Membrane cap (DO electrode use)
• DO electrode inner solution cathode polishing paper
• Screw-Driver
• Spare batteries
• Operation manual
• Carrying case

Features:

• A complete portable SCT-meter for dissolved oxygen measurements.
• Measurement mode of dissolved oxygen has the function of automatic temperature compensation, automatic salinity compensation and manual air pressure compensation.
• New polarographic type dissolved oxygen electrode can measure temperature, salinity and dissolved oxygen simultaneously, equipped with special dissolved oxygen electrode calibration set, polarization only for 3~5 min.
• Built-in microprocessor chips, intelligent functions such as automatic calibration, data storage, function set-up, automatic power-off and low voltage display.
• Combined diaphragm cap, replaceable sensitive membrane, screw new diaphragm cap to electrode, easy to use.
• SCT meter meets ISO9001:2000, CE standards and water proof IP57.

SCT-108.001.17 SCT-CON-PEN-3 Waterproof Handheld Cond/TDS/Salinity/Temp Meter by ScichemTech

Includes:

• Handheld Cond/TDS/Salinity/Temp Meter
• Standard Solution
• Storage Solution (pH4 & pH7)
• Lanyard Connection
• Battery
• Instruction Manual

Features:

• Reliable SCT Tester for Conductivity, TDS, Salinity and Temperature measurements.
• Microprocessor based for fast and accurate measurements.
• Special viewing angle designed of waterproof housing IP 57 rated. It floats on water.
• Large LCD display Conductivity, TDS, Salinity and Temperature Simultaneously.
• Simple to calibrate by one keyboard and automatic temperature compensation (ATC), Manual Salinity (MSC) and Altitude (MAC) Compensation.
• Multi-functions with Data-hold, Max/Min and shows PTS after calibration. Degree °C/°F are switchable.
• Auto power shut off after 10 minutes of non use.
• Easy to replace electrode module and the type of electrode would be recognized automatically and shown in display during insertion.
• Battery operated. Low battery and consumption indicator.

SCT-108.003.11 SCT BEN-CON-1 Basic Conductivity Benchtop Meter by ScichemTech

SCT basic benchtop conductivity meter for normal conductivity measurement.

Automatic calibration and automatic temperature compensation.

Instrument resolution 1.0

Includes:

• Plastic conductivity electrode
• 1413us/cm conductivity standard solution
• 9V power adapter
• 600 electrode holder
• Operation manual

Features:

• SCT benchtop meter is designed to measure conductivity and temperature.
• With built-in microprocessor chip, it has automatic calibration, automatic temperature compensation, data storage, and feature setting etc.
• Adopt advanced and original conductivity measurement technology, use 1 pc of conductivity electrode (K=1), it can meet measuring accuracy requirement for range within 0.5μs/cm ~ 200ms/cm by using only one-point calibration.
• Automatically recognize 8 kinds of conductivity standard solution. User can choose anyone from two series of solutions: Europe & USA series.
• Equipped with conductivity/ATC plastic electrode. For quick and precise results.
• SCT benchtop meter meets : ISO9001 & CE standards.