ScichemTech

Length(MM) & Diameter : 225 X Ø6.4
Temperature: -100°C ~ +1000°C OR -148°F ~ +1832°F

SCT-108.005.02 SCT-ORP-MINI ORP Mini Controller by ScichemTech

Includes:

• ORP probe
• Fixation clamps
• Solution
• Instruction manual

Features:

• SCT ORP MINI online ORP controller is an Industrial online analysis and monitoring instruments
• Simple and Compact design
• Meets all the International Standards
• Easy to Install, Operates safety with less maintenance.
• ORP Electrode Supplied with standard 10 meter cable, Measurement up to 40 meters.
• Large and clear display for easy reading
• Inlin e measurement and control of ORP values

SCT-108.005.04 SCT-TDS-MINI TDS Mini Controller by ScichemTech

Includes:

• TDS probe
• Fixation clamps
• Instruction manual

Features:

• SCT TDS MINI online TDS controller is an panel Instrument for online monitoring of Industrial process conductivity
• Simple and compact design
• Three ranges of TDS measurements in on single controller
• Range switch over and constant check can be easily adjusted from the rear panel.
• Unique signal collecting and processing technology.
• Special think film circuit for accurate measurement and stable operations.
• Linearized data and automatic temperature compensations.
• In line measurement and control of TDS.
• TDS Electrode is supplied with 5 meter cable

SCT-108.003.13 SCT-BEN-CON-3 Precision Benchtop Conductivity Meter by ScichemTech

Sct precision benchtop conductivity meter for precision conductivity Measurement of research and quality control.

With wide measurement range, high accuracy conductivity measurement Mode can be switch to TDS, salinity and resistivity.

Instrument resolution 1.0

Includes:

• Flexible electrode holder
• Plastic three-in-one combination electrode
• 1413 us/cm conductivity standard solution (50 ml)
• 9v power adapter
• RS-232 communication cable
• Communication software CD
• Operation manual
• Packing list

Features:

• SCT bench precision conductivity meter, suitable for high precision conductivity measurement of science research and quality control, with accuracy 0.5%.
• Equips conductivity/ATC glass electrode. Its measurement result is fast and precise. Can choose 25°c, 20°c and 18°c three kinds of basis temperature.
• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Automatically recognize 7 kinds of conductivity standard solution. User can choose anyone from two series of solutions: Europe & USA series
• Equipped conductivity/ATC electrode for quick and precise results.
• Adopt advanced and original conductivity measurement technology, use 1 pc of conductivity electrode (K=1), it can meet measuring accuracy requirement for range within 0.5μs/cm ~ 200ms/cm by using only one-point calibration.
• Ability to switch among conductivity, TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full scale.
• Conductivity measurement mode has the function of non-linear temperature compensation for high purity water.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets : ISO9001 & CE standards.

SCT-108.002.31 SCT LEMA IR Thermo Anemometer by ScichemTech

Includes:

• 9V battery
• Instruction manual
• Carrying case

Features:

• A complete portable SCT meter for air velocity, air flow and temperature measurements.
• Simultaneous display air flow in CFM/CMM or air velocity plus ambient temperature
• Combination of hotwire and standard thermistor, deliver rapid and precise measurements event at low air velocity
• Infrared thermometer measures remote surface temperature to 999F (537C) with 30:1 distance to spot ratio and laser pointer
• Wide range measurements of air velocity, fast response time
• Multifunction for air flow measurements : m/s, km/h, ft/ min, knots, mile/h
• Super large LCD with dual function display, read the air velocity and temperature at the same time.
• Ac power operated.

SCT-108.004.01 SCT SEDIMENT-1 Portable Manual Silt Density Index Meter by ScichemTech

Includes:

• ASTM instructions for measuring silt density index
• Filter Holder
• Pressure Gauge
• Pressure Regulator
• Ball Valve
• Graduated Cylinder
• Thermometer
• Tubing
• Filter Tweezers

Features:

• SCT SDI METER is completely assembled in a portable COMPACT case ready for on-site testing
• Includes ASTM instructions for measuring silt density index
• Feed pressure required: Min 40 psi
• Assembled with Filter Holder, Pressure Gauge, Pressure Regulator Ball Valve, Graduated Cylinder, Thermometer, Tubing, Filter Tweezers.
• Filters not included

SCT-108.004.02 SCT SEDIMENT-2 Portable & Automated Silt Density Index Meter 110VAC by ScichemTech

Includes:

• Power Supply
• Battery Charger
• Accessory Case
• Pack of 100 each
• .45 micron 47 mm membrane filters
• Special Tweezers for handling of the membranes
• A 50 micron pre-filter

Features:

• Performs SDI 5, 10 and 15 minute tests with both 100 ml and 500 ml sample size tests provides useful data that s impossible to obtain with the manual method. Especially helpful on high SDI waters.
• Unattended operation. Start the test and return in 15 minutes for the results saves you time.
• Real-time display of results including SDI, current flow rate and elapsed time. End of test display includes SDI 5,10 & 15 with 100 ml and 500 ml results.
• More accurate than hand testing (ASTM D 4189-95) - consistent results provides better information.
• Battery powered for true portability conduct tests anywhere.
• Uses standard 47 mm membrane filters for lower consumable cost and worldwide availability

SCT-108.002.B1 ORP Combination Electrode by ScichemTech

• Plastic ORP Combination Electrode
• suited for regular ORP measurement
• 8 PIN connector

SCT-108.002.D1 DO Electrode by ScichemTech

• DO electrode
• Polarographic DO electrode
• Suited for application in lab and field
• 8 PIN connector

SCT-108.002.IA DO Electrode Electrolyte by ScichemTech

• DO electrode electrolyte
• Supplement electrolyte
• Special for DO electrode
• Specification: 30 ml/bottle

SCT-108.003.C2 Glass Conductivity Electrode by ScichemTech

• Glass conductivity electrode
• K=1.0 cm-1 automatic temperature compensation
• Precision laboratory test for conductivity
• 4-pin plug

SCT-108.001.35 SCT-THER-PEN-6 Waterproof LCD Digital Multi-Thermometer by ScichemTech

Features:

• Reliable SCT Multi-Tester for Temperature Measurements.
• Protective plastic cap for stainless steel probe, pocket clip, stand on back unit and sensor wire compartment
• Sensing time 1 second for on / off operation.
• Option to select °F/°C.
• Max. / Min. memory recalling.
• Auto shut-off.
• Stainless Steel Probe - 133 mm.
• Option to select - hold / test data.
• Battery operated with Low Battery Indicator.

SCT-108-002-17 SCT KEVIN Portable Suspended Solids Analyzer by ScichemTech

Includes:

• Sensor
• Battery
• Instruction Manual

Features:

• A complete portable SCT meter for suspended solids measurements.
• SCT - Kevin meter designed to measure the suspended solids using optical sensor.
• Meter is optimized for MLSS and RAS data logging and download to spread sheet through RS232 serial port.
• Independent calibration for MLSS and RAS.
• Water proof with IP57 rating and large backlight graphical display.
• Real time SS concentration for process control.
• SCT Kevin meter can also be used to measure sludge blankets in clarifiers memory of safety
• Meter operates with rechargeable batteries and charges for 12 hours.
• Auto shut-off.

SCT-108.001.18 SCT-pH-PEN-4 Waterproof Handheld PH/mV/Cond/TDS/Salt/Temp Meter by ScichemTech

Includes:

• Handheld PH/mV/Cond/TDS/Salt/Temp Meter
• Standard Solution (pH4, pH7 & 1413uS)
• Lanyard Connection
• Battery
• Instruction Manual

Features:

• Reliable SCT Multi Tester for pH, ORP, Conductivity, Salinity and Temperature measurements.
• Microprocessor based for fast and accurate measurements.
• Special viewing angle designed of waterproof housing IP 57 rated. It floats on water.
• Large LCD display for pH / ORP / Conductivity /TDS / Salinity and Temperature simultaneously.
• Easy to calibrate by one keyboard and Automatic Temperature Compensation (ATC), Manual Salinity(MSC) and Altitude(MAC) Compensation.
• Multi-functions with Data-hold, Max/Min and shows PTS after calibration Degree °C/°F are switchable. World best combination handhled meter.
• Auto power shut off after 10 minutes of non use.
• Easy to replace electrode module and the type of electrode would be recognized automatically and shown in display during insertion.
• Battery operated. Low battery and consumption indicator.

SCT-108.002.41 SCT NAVID CO₂ Detector - II by ScichemTech

Includes:

• User Manual
• Sleeve
• Carrying case
• 9V battery
• Data logging via USB
• AC power adapter

Features:

• A complete portable SCT meter for carbon dioxide measurements.
• Large dual LCD display for co₂, % RH humidity and temperature.
• Precise adjustment in different barometric levels (or pressures).
• Co₂: 0 ~ 9,999 PPM range, diffusion sampling mode.
• Continuous data logging with time/date.
• Energy efficiency by sampling time modulation.
• Data hold & maximum/minimum with time stamp.
• USB power supply.
• Data memory and recall function.
• Easy to use USB interface and user friendly software.
• Fast warm up time/audible alarm.