Over $5000

059-C110-000 ppbRAE 3000 Portable Handheld VOC Monitor - 10.6 eV Lamp, Li-Ion / Universal Charger by RAE Systems

The compact ppbRAE 3000 is a comprehensive VOC gas monitor and datalogger for hazardous environments. The ppbRAE 3000 is the most advanced handheld VOC monitor available for parts-per-billion detection. This third-generation patented PID device monitors VOCs using a photoionization detector with a 9.8 eV, 10.6 eV UV-discharge lamp.

The built-in wireless modem allows real-time data connectivity with the ProRAE Guardian command center located up to two miles/3 km away (with optional RAELink3 portable modem) from the ppbRAE 3000 detector.

Monitor only includes

• ppbRAE 3000 Monitor, with RAE Systems UV lamp, as specified
• Datalogging with ProRAE Studio II
• Charging/download adapter
• VOC Zeroing Tubes (1 box)
• Tube adapter
• Tedlar® bag for calibration
• Flex-I-Probe™
• External filter
• Rubber boot with straps
• Alkaline battery adapter
• Lamp-cleaning and tool kit
• Operation CDROM
• Operation & Maintenance manual
• Soft leather case

Monitor with accessories kit adds

• Hard transport case with pre-cut foam padding
• Charging/download cradle
• 5 porous metal filters and O-rings
• Organic vapor zeroing kit
• Gas outlet port adapter and tubing

Optional calibration kit adds

• 10 ppm isobutylene calibration gas, 34L
• Calibration regulator and flow controller

Optional Guaranteed Cost of Ownership Program

• 4-year repair and replacement guarantee
• Annual maintenance service

Key Features

• 3-second response time
• Extended range from 1 ppb to 10,000 ppm with best in class linearity
• Humidity compensation with integral humidity and temperature sensors
• Real-time wireless built-in - Bluetooth (and optional RAELink3 portable modem) or Mesh Network support
• Integrated Correction Factors list of 220 compounds more than any other PID
• Includes flashlight for dark conditions
• Large graphic display presents gas type, Correction Factor and concentration
• Easy access to battery, lamp and sensor in seconds without tools
• Rugged housing withstands use in harsh environments
• IP-67 waterproof design for easy cleaning and decontamination

Application

• Oil & Gas
• HazMat
• Industrial Safety
• Civil Defense
• Environmental & Indoor Air Quality

MX6-KJC34211 MX6 iBrid Multi-Gas Monitor, LEL,COSH,H2,O2,NO2,LE,P,E by Industrial Scientific

The MX6 iBrid® is more than an intelligent hybrid of Industrial Scientific's best monitoring technologies—it's the most adaptable six-gas monitor on the market. With hundreds of possible sensor combinations, and a robust list of available configuration settings, the MX6 iBrid is ready to monitor oxygen, toxic and combustible gas, and volatile organic compounds (VOCs).

As your work changes, so can your MX6 iBrid. It uses five sensor slots to detect up to six gases. Each of those sensor slots accepts a variety of sensors, which means you can use the instrument with a PID sensor one day and an infrared sensor the next. What's more, settings allow you to adapt the instrument's behavior for your application. If you need to use a benzene PID response factor for one application, and butadiene for others, the familiar menu structure will allow you to quickly change settings.

The rugged MX6 iBrid carries our Guaranteed for Life™ warranty and is compatible with DSX™ Docking Stations. With a DSX Docking Station, maintenance is simplified and data becomes more than a spreadsheet filled with logged readings. Proactively manage your gas detection fleet—track trends, know when instrument maintenance will be required, and understand how your MX6 iBrid instruments are being used.

• 24 "Plug-and-Play" field-replaceable sensors including PID and Infrared options
• Up to 6 gases monitored simultaneously
• Simple, user-friendly, customizable, menu-driven navigation
• Five-way navigation button
• Durable, concussion-proof overmold
• Optional integral sampling pump with strong 30.5 meter (100 feet) sample draw
• Full-color graphic LCD is highly visible in a variety of lighting conditions
• Powerful, 95 dB audible alarm

VN00136 X-am 8000 Multi-Gas Detector, PID-HC, LEL, CO-LC, O2, H2S-LC by Draeger

Clearance measurement was never this easy and convenient: The 1 to 7 gas detector detects toxic and flammable gases as well as vapors and oxygen all at once – either in pump or diffusion mode. Innovative signaling design and handy assistant functions ensure complete safety throughout the process.

Multi-gas detector

• 1- to 7 gas detection device
• for clearance measurement
• detection of toxic and combustible gases as well as vapors and oxygen

Specially designed for use with a pump, optimized for clearance measurement

The Draeger X-am® 8000 is equipped with a very powerful pump. It can be connected with hoses of up to 45 meters in length. A pump adapter makes it easy to switch between diffusion and pump mode at any time. This means the pump is only operated when you actually need it. That saves energy, reduces wear and tear, and extends the lifespan of the pump.

Handy and durable, the Draeger X-am® 8000 is intuitive to operate single-handedly using three function keys. The easy-to-read color display clearly lays out all the information for you.

The multi-gas detector also features advanced software functions including change of measurement gas for PID, CatEx and IR sensor during operation. This is based on an on-board library and a convenient assistant to hide unused sensor channels and adapt the flexible instrument to the measurement task.

Standard accessories include a sturdy shoulder strap so you can comfortably carry the X-am 8000. Thanks to its compact and robust construction, the device can withstand even the harshest conditions.

Clearance measurement, release and documentation in no time

The X-am 8000 effectively supports various applications with specially developed assistant functions that guide you through each process step by step. During clearance measurement, for example, the smart assistant calculates the necessary flooding time for the device and probe (FKM hose) based on parameters such as measuring gases, temperature limits, and the indicated hose length. Additionally, customer defined flooding times are also possible.

When monitoring for potentially high methane concentrations, an optional automatic measurement range switch makes it easier to take a reading: If the Cat-Ex sensor measures values above 100 % LEL, the display switches to the range of 0 to 100 vol %. A similar function to measure in % LEL and vol % simultaneously is also available for the IR EX ES sensor.

The DraegerSensor CatEx 125 PR Gas offers a special variant for the measuring gas methane, which enables measurements in the ppm range. The performance of selected sensors has been verified by an external approval body within the scope of the measurement performance approval (EN 60079-29-1) for combustible gases and vapors including methane, propane and n-nonane.

An additional useful tool is CSE Connect. It combines an app, specially designed for the X-am 8000, with a cloud-computing solution. Measuring jobs can be quickly and easily transferred to the app using an online application. An optional Bluetooth® module in the Draeger X-am 8000 enables measured values to be transferred automatically to the CSE Connect app. You can also easily and conveniently use the app to create measurement reports. This saves time and helps you manage your measuring tasks during clearance measurements more efficiently.

Clear signaling design

The signal system of the Draeger X-am 8000 is based on a clear color code, in accordance with the requirements of EN 60079-29-1, EN 45544-1 and EN 50104:

• Red light = gas alarm
• Yellow light = device-related alarm, e.g. low battery
• Green light = device is ready for use

The green glow of the D-Light allows you to see from a distance whether the device has been properly tested and is ready for use.

In case of an alarm, the X-am 8000 alerts you with colorful warning LEDs, a loud horn (100 dB(A) at a distance of 30 cm), and clearly palpable vibration. Optionally, four preset hazard symbols are available for the display which explicitly indicate the presence of explosive or toxic gas hazards, for example. This allows the user to easily recognize the type of hazard based purely on the symbol displayed.

The X-am 8000 is equipped with an impact detection system. The event report indicates whenever severe mechanical impacts have occurred that might result in functional impairments of the device or the sensors. These are also documented in the data logger. With this information, a device operator can specifically check the device. The instrument can also be locked after a detected impact as well.

Economical Fleet Management

Bumptest and calibration are carried out simply and quickly using the Draeger X-dock® calibrating station. Its low test gas consumption keeps operating costs to a minimum.

Its reporting function and numerous other useful features make the X-dock Manager PC software a smart addition to any fleet management operation. To identify devices in your fleet, you can either use tried and tested barcodes or an integrated RFID transponder.

Specialist for high and low hydrocarbon concentrations

To measure hard-to-detect hydrocarbons, you can fit the Draeger X-am 8000 with one of two high-performance PID sensors. The PID HC covers a measurement range of 0 to 2,000 ppm (isobutene). The PID LC ppb is particularly suited for a measurement range of 0 to 10 ppm (isobutene) with a high resolution in the range below 1 ppm.

For benzene-specific measurements, the X-am 8000 can be used with a pre-tube. The advantage: You only need one measuring device for this application, which significantly reduces the costs of purchasing, maintaining and transporting devices in use. The use of pre-tubes is supported by a built-in assistant.

Inductive charging protects against wear and tear

The X-am 8000 features inductive charging. This makes it easier to operate and increases the lifespan of the device. Issues like corrosion and contact problems in the charging cradle are a thing of the past. You can charge (outside of explosion-hazard zones) and measure at once, e.g, when using inside vehicles or on machinery.

The charging cradles can connect with one another, take up minimal space, and are compatible with existing Draeger X-am® series cradles.

029-0505-000 RAELink3 Kit by RAE Systems

The RAELink3 modem allows integration of many RAE Systems gas and radiation monitors, and select third-party devices into a wireless detection system. Monitors linked with a RAELink3 modem can communicate sensor data and GPS coordinates to a command center's PC running ProRAE Guardian software up to 2 miles (3 km) away. Bluetooth® connectivity, a user-friendly display and easy-to-use menu simplify the configuration and use of the RAELink3.

RAELink3 Communication Kit

RAELink3 Communication Kit enables communication between a variety of RAE Systems' wireless monitors and ProRAE Guardian. Custom RAELink3 Communication Kits are also available for select third-party devices. Check the RAE Systems web site for the latest listing of compatible third-party devices.

RAE Systems Compatible Monitors

• GammaRAE II R Personal Radiation Detector
• MiniRAE 3000, ppbRAE 3000 and UltraRAE 3000 Photoionization Detectors
• AreaRAE Steel

RAELink3 Communication Kit Includes

• RAELink3 modem equipped with GPS, Bluetooth, and long-range radio
• Rugged antenna
• Charging adapter and AC/DC adapter alkaline battery pack
• Hard transport case
• Quick reference guide and resource CD
• RS-232 cable (for connection to devices not equipped with Bluetooth)

Key Features

• GPS equipped for tracking and viewing sensors and personnel on a local mapping area
• Bluetooth-equipped for wireless connection option to monitors
• Long-range radio to transmit system information up to 2 miles (3 km) in urban setting
• Easily configure in the field to interface with other ProRAE Guardian networked monitors
• Programmable as a Host modem, to Repeater, to Remote modem as needed
• Backlit display with intuitive interface
• Radio strength indicator on LCD
• Weatherproof
• Shock resistant
• Up to 18 hours run time on single charge

Applications

• Incident Response
• Venue Protection
• Industrial Safety
• Perimeter Monitoring
• Confined Space Entry
• Pulp and Paper Industry
• Plant Turnarounds
• Marine and Offshore Wells

SPMF-DF1CH SPM Flex Unit with Dust Separator for Switzerland by Honeywell Analytics

Improving safety and productivity with the most flexible, user-friendly tape-based gas detector for low-level toxics Feel more confident than ever in your plant's safety and uptime.

In your critical operations, where distruptions can cost millions of dollars, do you have the right instrument for your toxic gas monitoring system? One that your workers feel confident using? One that provides the gas intelligence you need?

With SPM Flex, you never have to worry whether your single-point monitor will stand up to harsh conditions whether a false alarm will lead to a costly shutdown, or whether your workers will be able to correctly operate the device.

Instead, you can count on our Chemcassette® tape-based SPM Flex for unmatched accuracy, flexibility and ease of use - even in challenging environments. So you can rest assured that you're keeping your people safe and your operations running.

Rugged and reliable

Stands up to harsh conditions. Working in the sun and rain, around blasts of steam, or other challenging environmental conditions? The SPM Flex goes where you do, standing up to changes in temperature and humidity without compromising accuracy.

It also works well in cleanrooms, thanks to its Teflon coating that doesn't attract dust. And if it's ever exposed to toxic gas or caustic liquid, just hose it down or use a decontamination wipe.

New Enhancements

• Additional gas formulas
• Flip screen
• Duty cycle to reduce Chemcassette® usage
• K-factor multiplier

Crisp, clear visibility - from near and far

Visible at a distance

Thanks to a crisp display and a color-coded LED bar on top of the SPM Flex, you can see alarm status, gas concentration and other data easily from a distance. So even if you're not right next to your SPM Flex, you always know the health of your unit and the safety of your area.

Remote viewing through the web

Your visibility even extends to other rooms and buildings, thanks to the unit's web capabilities. Simply plug an Ethernet cable into the SPM Flex, and use the easy-to-read web interface to see the status of the unit - no matter where you are.

Flexible uses throughout your plant

Thanks to its robust design and intuitive operation, the SPM Flex can perform a variety of roles.

Emergency Response

When your emergency response team needs to respond quickly, the SPM Flex is the best tool for the job. With fast startup, easy operation in hazmat gear and rugged design, the SPM Flex is ready when you are.

Life Safety

The SPM Flex, capable of working as both a fixed and a portable unit, is an important addition to your toxic gas monitoring system. Use it to investigate suspected leaks, or, if you have a monitoring point that's out of service, use the SPM Flex to replace it - with the option to plug it in or use the long-lasting battery.

Tool Maintenance

When your crews need to perform maintenance on a process tool, they can take the SPM Flex with them to ensure safety while they work. With full data logging and an industry leading gas selection, you'll always have the assurance that your staff are safe every day, all day.

Advanced capabilities - no expertise required

Your workers may not use the SPM Flex every day, but when they need it, they'll be able to operate it with confidence. That's because this highly automated single-point monitor is intuitive, easy to use, and designed to fit the unique needs of your operation.

Easy to choose the target gas

Want to monitor for a certain gas? Just turn on the SPM Flex, snap in the proper Chemcassette® tape, and use the intuitive LCD menu to select the gas from the list. Need to monitor for a gas in a different family? Just swap out the Chemcassette tape and choose the new gas. No ChemKeys™ required.

Quick start-up for emergency response

The SPM Flex gets up and running in under two minutes - so your response team can quickly gear up and go to the site.

Easy to use with protective equipment or hazmat gear

Purpose-built with the user experience in mind, the SPM Flex is easy to carry, operate and read - even when you're wearing a hazmat suit or other protective gear. The monitor has large, chunky buttons that are easy to use. And when you carry the SPM Flex, the display faces up so it's easy to read.

Extreme Accuracy for Extreme Gases

The SPM Flex, the next evolution of our SPM and TLD gas detectors with Chemcassette tape technology, is capable of working as both a fixed and a portable unit. The monitor detects the ultrasensitive gases inherent in your operations, including: Hydrides, Mineral acids, Oxidizers, Amine.

Our Chemcassette tape technology shows the presence of gas - quickly and definitively with a physical record. So you can prevent costly downtime from false alarms.

Data logging and information management for total confidence

Access to detailed history

With the SPM Flex, you can rest assured that every monitoring moment is being recorded - and ready for analysis whenever you need it. Whether you want to report a gas incident or investigate a trend, the monitor keeps up to a three-month history of gas concentrations, alarms, tape changes and other factors. Plus, you have the option to view this data through a web server, or you can easily download it to a USB drive.

Easy to adjust configurations

Need to change the detection limit for a gas? Alter the parameters for latching alarms? Just adjust your settings with the intuitive menu - then use the USB port to download and transfer them to other units. So it's a snap to deploy multiple monitors with a consistent configuration.

Designed to the highest standard of reliability

Easy maintenance and long-lasting battery

The SPM Flex has easily serviceable parts and a reliable battery, so you can count on long-lasting portable use - and an affordable cost of ownership. Even more, if the SPM Flex is plugged in and you lose power, the internal battery kicks in as backup so the unit keeps monitoring.

All backed by the history and reputation of Honeywell

With the SPM Flex, like other products from Honeywell, you can have peace of mind from knowing your gas detection equipment is engineered to the highest standard of safety and reliability. We honor the investment you've made, and we're here to support you, giving you complete confidence in your facility's gas safety, compliance and uptime.

Honeywell Gas Detection Offerings

Honeywell gas detectors protect people, assets and environment from toxic and combustible gas hazards, helping to create safer, more comfortable, secure and productive environments. Our strength derives from Honeywell's leadership in sensor technology; in fact Honeywell operates four sensor manufacturing plants, supplying an entire industry with its core detective element.

Commercial

Gas detection from standalone units to fully engineered, multi-point systems, all offering cost-effective regulatory compliance.

• Applications: parking structures, chillers, mechanical rooms, office towers, commercial buildings, shopping centers, swimming pools, golf courses, schools and universities, laboratories

Industrial

Renowned Sieger and Manning gas detection systems with advanced electrochemical, infrared and open path sensing technologies.

• Applications: oil and gas, cold storage, water/wastewater treatment, chemicals, engine rooms, plastics and fibers, agriculture, printing and light industrial

Portables

Single or multi-gas ranging from compact, lightweight designs for personal protection to systems-based, networkable instrumentation for industrial hygiene.

• Applications: underground utility and electricity ducts, boiler rooms, post-fire sites, sewers, industrial plants, industrial hygiene, first responder teams, remote fleets

High Tech/Government

Reliable gas and chemical detection including infrared spectroscopy (MST) with no cross interference, to Chemcassette paper-based solutions (MDA Scientific) offering detection down to parts per billion.

• Applications: semiconductor manufacturing, aerospace propulsion, specialty chemicals industry, research laboratories, emergency response

Technical Services

24/7 global network includes post-sales service and Systems Integration teams.

• Emergency call out, service contracts, on/off-site repair, training and commissioning
• Complete range of spares, consumables and accessories

72-6AZB-A GX-6000 One Sensor Sample Draw Gas Monitor, LEL/Oxy/H2S/CO/VOC(10.0 ev)/VOC(6K ppm 10.6 eV), with alkaline battery pack/100-240 VAC charger by RKI Instruments

Simply put, the GX-6000 is a game changer. This powerful hand-held instrument is capable of simultaneously monitoring up to 6 gases. In addition to the standard 4 confined space gases which include combustibles, O2, CO, & H2S, the GX-6000 has 2 additional smart channels that accept PID, IR or super toxic sensors. Equipped with a strong internal sample pump, a man-down alarm, a panic alarm, an LED flashlight, and large auto rotating LCD display, the GX-6000 can operate as a single gas PID unit or a multifunctional tool utilizing all 6 channels. The GX-6000 with a PID sensor will come equipped with a library of over 600 VOC gases to choose from as standard. Choosing from the library is easy with a personalized favorites list of 30 commonly used VOC's as well as a list of 8 of the most recently used VOC's.

The GX-6000 has a rugged design built for the nastiest environments. It is equipped with a removable impact-resistant rubber boot and a dust and water resistant enclosure with an IP-67 rating. With 5 bright LED lights on 3 sides of the instrument, alarms are easily seen from a variety of perspectives. With vibration and loud audible alarm, GX-6000 will easily alert users when needed.

Features

• Monitor up to 6 gases
• 2 smart sensor slots auto recognize PID, IR, and super toxic sensors
• 5 Operating modes: normal, leak check, inert, snap log and bar hole
• Library of over 600 VOCs
• PPM Leak Check mode
• Man-down and panic alarms
• Auto display rotation
• LED Light source
• Internal sample pump
• Glove friendly glow in the dark buttons
• Light weight, small, rugged IP-67 design
• Interchangeable battery packs Li-ion / alkaline
• Operates up to 14 hours on Li-ion battery pack, fully recharges in 3 hours
• Field replaceable sensors, batteries and filters

Applications

• Confined space entry
• Hazmat response teams
• Arson investigation
• Remediation sites
• Perimeter monitoring
• Leak detection
• Landfill monitoring
• Wing tank entry

*Please note we can only ship RKI products to customers within the United States

4421-1-3 4400-C 4-channel Controller Panel with Three ZD 21 Transmitters by GfG

The 4100 one-channel and the 4-channel 4400 gas warning systems offer safe and reliable gas detection.

Alarm points

Each alarm can be adjusted separately. False alarms are eliminated with the adjustable alarm delay. The alarm point values can be freely adjusted within the detection range of the transmitter. Every alarm point value can be selected to be latching / non-latching or resettable / non resettable.

Alarm relays

The controller provides four voltage-free relays for the three alarms in addition to one fault warning. The relays may be used to control additional alarm devices like lights or horns. They can even prompt specific counter measures to prevent or limit dangers from gases or vapors.

Features

• Complete 1-to-4 channel controller / gas monitoring system
• 110 VAC or 24 VAC
• Case-mounted horn / strobe
• Security lock
• Slim-line design

Additional features

The 4100 control panel stores peak values and offers an additional 4-20 mA output. The 4400 control panel offers the ability to connect up to 4 transmitters and comes standard with an additional 24 VAC output for solenoid control.

0563 0885 71 885-1 Thermal Imager Kit by Testo

You can carry out completely damage-free tests on materials and components with the thermal imager testo 885-1. Thanks to the 320 x 240-pixel detector, in combination with the high-quality Germanium optics, the testo 885-1 achieves an excellent image quality. This allows weak spots and problems to be reliably detected in industrial and building thermography. In combination with the Testo Super Resolution technology, the testo 885-1 records high-resolution thermal images in excellent quality (640 x 480 pixels). This means that even the smallest or very distant measurement objects can be thermographed very precisely.

• Detector size 320 x 240 pixels: With 76.800 temperature measurement points, the measurement objects are detected in outstanding image quality, extremely clearly and precisely.
• Super Resolution technology to 640 x 480 pixels Super Resolution technology improves the image quality by one class, i.e. the resolution of the thermal images is four times higher.
• Flexibility thanks to rotatable handle and fold-out, rotatable display
• Thermal sensitivity < 30 mK, Thanks to an excellent temperature resolution of < 30 mK, even the smallest temperature differences are visible.
• Large field of view thanks to 30° lens With the standard wide-angle lens, large image sections are immediately recognized, and the temperature distribution of the measurement object recorded at a glance.
• Panorama image assistant For large measurement objects, the panorama image assistant allows the analysis and documentation of a total image stitched together from many individual images. There is no need to administer, view and compare several images.
• Site Recognition Technology For repetitive thermography of similar measurement objects, the Site Recognition technology offers the direct recognition, allocation and archiving of the measurement sites, as well as the automatic allocation and archiving of the the thermal images.
• High temperature up to 1200°C With the high temperature option, the measuring range can be flexibly extended up to 1200 °C.
• Special measurement mode for detecting areas with danger of mould
• Lens protection glass
• Auto focus
• Built-in digital camera with power LEDs
• Minimum focus distance 10 cm
• Voice recording using headset

The thermal imager testo 885-1 is delivered in a robust case incl.

• Pro software
• SD card
• USB cable
• Carrying strap
• Lens cleaning cloth
• Mains unit
• Li-ion rechargeable battery

72-2120-103-5K Digester Gas Monitor, 5000ppm H2S by RKI Instruments

RKI is proud to introduce our Digester Gas Monitor. Gas from waste digesters contains high levels of methane, CO2, and H2S, with little to no oxygen present. The RKI gas monitor checks for all these gases on a cyclic basis. A powerful air aspirator draws a sample from up to 100 feet away. Since digester gas contains high humidity and high H2S, both of which can cause damage to sampling systems, the RKI Digester Gas Monitor is designed to handle these with no damage to the sampling system or sensors. The sample is passed through a series of dirt, dust, and moisture stopping filters, and these filters are automatically purged with fresh air at the end of each cycle.

Measurement time is just 4 minutes, taken at periodic cycles. Cycle time is selectable, with settings for cycle time of 15 minute, 1 hour, 4 hours, 8 hours, or 24 hours. A cycle can also be initiated anytime by pressing a button. After each cycle, the sensors and sampling system are flushed with fresh air so as to minimize corrosion caused by the high H2S content. The system is fault tolerant minimizing the possibility of expensive repairs or downtime.

System integrity is maintained at all times using a flow fail monitoring device which provides a fail alarm and relay if there is ever a problem with the flow system, such as a blockage, or if the air aspirator compressed air supply is removed or interrupted.

The system is housed in a wall mounting NEMA 4X enclosure. The gas readings can be viewed through the enclosure door clear window. Flow meters and filters are easily visible for confirmation of correct flows and operation. The RKI Digester Gas Monitor contains adjustable alarm levels for each gas, and also programmable alarm relays. In addition, the unit provides 4-20mA signals for each gas concentration for connection to an external DCS, PLC, or other site control system. A Modbus output is also available. The outputs are the readings received from the last cycle taken.

Features:

• Corrosion resistant design; Housing designed for extreme environments; Internal construction for extreme samples; Flow system designed to handle corrosive wet samples
• Sample system designed to handle high humidity
• Accurately measures gases with high levels of H2S present
• 100 ft. sample range
• Up to 4 sensors: Methane 0-100% Volume; CO2 0-50% Volume; Oxygen 0-25% Volume; H2S 0-1000 PPM (0-3000 or 0-5000 optional)
• Self draining moisture trap
• Automatic backflush of sampling system
• Long life air aspirator (no moving parts)
• Suitable for inside/outside installations
• NEMA 4X enclosure
• Uses proven RKI technology
• Modular design easy to maintain
• Simple to operate

Industry Applications:

• Wastewater Treatment Digesters
• Biogas Methane
• Animal Farms

*Please note we can only ship RKI products to customers within the United States

059-C110-000 ppbRAE 3000 Portable Handheld VOC Monitor - 10.6 eV Lamp, Li-Ion / Universal Charger by RAE Systems

The compact ppbRAE 3000 is a comprehensive VOC gas monitor and datalogger for hazardous environments. The ppbRAE 3000 is the most advanced handheld VOC monitor available for parts-per-billion detection. This third-generation patented PID device monitors VOCs using a photoionization detector with a 9.8 eV, 10.6 eV UV-discharge lamp.

The built-in wireless modem allows real-time data connectivity with the ProRAE Guardian command center located up to two miles/3 km away (with optional RAELink3 portable modem) from the ppbRAE 3000 detector.

Monitor only includes

• ppbRAE 3000 Monitor, with RAE Systems UV lamp, as specified
• Datalogging with ProRAE Studio II
• Charging/download adapter
• VOC Zeroing Tubes (1 box)
• Tube adapter
• Tedlar® bag for calibration
• Flex-I-Probe™
• External filter
• Rubber boot with straps
• Alkaline battery adapter
• Lamp-cleaning and tool kit
• Operation CDROM
• Operation & Maintenance manual
• Soft leather case

Monitor with accessories kit adds

• Hard transport case with pre-cut foam padding
• Charging/download cradle
• 5 porous metal filters and O-rings
• Organic vapor zeroing kit
• Gas outlet port adapter and tubing

Optional calibration kit adds

• 10 ppm isobutylene calibration gas, 34L
• Calibration regulator and flow controller

Optional Guaranteed Cost of Ownership Program

• 4-year repair and replacement guarantee
• Annual maintenance service

Key Features

• 3-second response time
• Extended range from 1 ppb to 10,000 ppm with best in class linearity
• Humidity compensation with integral humidity and temperature sensors
• Real-time wireless built-in - Bluetooth (and optional RAELink3 portable modem) or Mesh Network support
• Integrated Correction Factors list of 220 compounds more than any other PID
• Includes flashlight for dark conditions
• Large graphic display presents gas type, Correction Factor and concentration
• Easy access to battery, lamp and sensor in seconds without tools
• Rugged housing withstands use in harsh environments
• IP-67 waterproof design for easy cleaning and decontamination

Application

• Oil & Gas
• HazMat
• Industrial Safety
• Civil Defense
• Environmental & Indoor Air Quality

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

MBB3-A1C112E-030 MultiRAE Pumped Portable Multi-gas Monitor - 10.6 eV PID / LEL / H2S / CO / O2 / Alkaline / Non-Wireless by RAE Systems

The MultiRAE is the most advanced portable chemical detector on the market. The MultiRAE delivers the broadest PID sensor range in its class and the versatility to support 25 intelligent interchangeable sensor options (such as PID, NDIR for combustibles and CO2, ammonia, chlorine, formaldehyde, and phosphine) to fully meet the monitoring needs in a variety of applications, including industrial hygiene, personal protection, leak detection, and HazMat response.

The MultiRAE's optional wireless capability improves safety by providing commanders and safety officers real-time access to instrument readings and alarm status from any location for better situational awareness and faster incident response.

Key Features

• Wireless access to real-time instrument readings and alarm status from any location
• Unmistakable five-way local and remote wireless notification of alarm conditions including Man Down Alarm
• Intelligent sensors store calibration data, so they can be swapped in the field
• Extensive on-board gas libraries (190 VOCs and 55 combustible gases)
• Largest display in its class
• Continuous datalogging (6 months for 5 sensors, 24x7)

Applications

• Aviation (wing tank entry)
• Chemical
• Environmental
• Oil and gas
• Pharmaceutical
• Shipping / marine
• HazMat response
• Clandestine drug labs

059-B21D-100 MiniRAE 3000+ Portable Handheld VOC Monitor - 11.7 eV Lamp 1/2 in., Recharg. Li-Ion/ Universal Charge, Accessories Kit, Calibration Kit, Wireless Bluetooth by RAE Systems

The MiniRAE 3000 is a comprehensive handheld VOC (Volatile Organic Compound) monitor that uses a third-generation patented PID technology to accurately measure more ionizable chemicals than any other device on the market. It provides full-range measurement from 0 to 15,000 ppm of VOCs.

The MiniRAE 3000 has a built-in wireless modem that allows real-time data connectivity with the ProRAE Guardian command center located up to 2 miles (3 km) away through a Bluetooth connection to a RAELink 3* portable modem or optionally via Mesh Network.

Monitor only includes

• MiniRAE 3000 Monitor, Model PGM-7320
• Wireless communication module built in, as specified
• Datalogging with ProRAE Studio II Package
• Charging/download adapter
• RAE UV lamp, as specified
• Flex-I-Probe™
• External filter
• Rubber boot
• Alkaline battery adapter
• Lamp-cleaning kit
• Tool kit
• Operation CD-ROM
• Operation and Maintenance manual
• Soft leather case

Optional calibration kit adds

• 100 ppm isobutylene calibration gas, 34L
• Calibration regulator and flow controller

Optional guaranteed cost-of-ownership program

• 4-year repair and replacement guarantee
• Annual maintenance service

Key Features

• Third-generation patented PID technology
• VOC detection range from 0 to 15,000 ppm
• 3-second response time
• Humidity compensation with built-in humidity and temperature sensors
• Six-month datalogging
• Real-time wireless built-in - Bluetooth (and optional RAELink3 portable modem) or Mesh Network support
• Large graphic display with integrated flashlight
• Multi-language support with 10 languages encoded
• IP-67 waterproof design

Application

• Oil and Gas
• HazMat
• Industrial Safety
• Civil Defense
• Environmental and Indoor Air Quality

MX6-7426S211 MX6 iBrid Multi-Gas Monitor, Cl2, NO2, H2S, NH3, CH4 IR, Lithium-ion Extended Runtime battery (UL/CSA/ATEX/IECEX), Aspirated (pump), English by Industrial Scientific

The MX6 iBrid® is more than an intelligent hybrid of Industrial Scientific's best monitoring technologies—it's the most adaptable six-gas monitor on the market. With hundreds of possible sensor combinations, and a robust list of available configuration settings, the MX6 iBrid is ready to monitor oxygen, toxic and combustible gas, and volatile organic compounds (VOCs).

As your work changes, so can your MX6 iBrid. It uses five sensor slots to detect up to six gases. Each of those sensor slots accepts a variety of sensors, which means you can use the instrument with a PID sensor one day and an infrared sensor the next. What's more, settings allow you to adapt the instrument's behavior for your application. If you need to use a benzene PID response factor for one application, and butadiene for others, the familiar menu structure will allow you to quickly change settings.

The rugged MX6 iBrid carries our Guaranteed for Life™ warranty and is compatible with DSX™ Docking Stations. With a DSX Docking Station, maintenance is simplified and data becomes more than a spreadsheet filled with logged readings. Proactively manage your gas detection fleet—track trends, know when instrument maintenance will be required, and understand how your MX6 iBrid instruments are being used.

• 24 "Plug-and-Play" field-replaceable sensors including PID and Infrared options
• Up to 6 gases monitored simultaneously
• Simple, user-friendly, customizable, menu-driven navigation
• Five-way navigation button
• Durable, concussion-proof overmold
• Optional integral sampling pump with strong 30.5 meter (100 feet) sample draw
• Full-color graphic LCD is highly visible in a variety of lighting conditions
• Powerful, 95 dB audible alarm

059-C110-100 ppbRAE 3000 Portable Handheld VOC Monitor - 10.6 eV Lamp, Li-Ion / Universal Charger, Accessories Kit, Calibration Kit by RAE Systems

The compact ppbRAE 3000 is a comprehensive VOC gas monitor and datalogger for hazardous environments. The ppbRAE 3000 is the most advanced handheld VOC monitor available for parts-per-billion detection. This third-generation patented PID device monitors VOCs using a photoionization detector with a 9.8 eV, 10.6 eV UV-discharge lamp.

The built-in wireless modem allows real-time data connectivity with the ProRAE Guardian command center located up to two miles/3 km away (with optional RAELink3 portable modem) from the ppbRAE 3000 detector.

Monitor only includes

• ppbRAE 3000 Monitor, with RAE Systems UV lamp, as specified
• Datalogging with ProRAE Studio II
• Charging/download adapter
• VOC Zeroing Tubes (1 box)
• Tube adapter
• Tedlar® bag for calibration
• Flex-I-Probe™
• External filter
• Rubber boot with straps
• Alkaline battery adapter
• Lamp-cleaning and tool kit
• Operation CDROM
• Operation & Maintenance manual
• Soft leather case

Monitor with accessories kit adds

• Hard transport case with pre-cut foam padding
• Charging/download cradle
• 5 porous metal filters and O-rings
• Organic vapor zeroing kit
• Gas outlet port adapter and tubing

Optional calibration kit adds

• 10 ppm isobutylene calibration gas, 34L
• Calibration regulator and flow controller

Optional Guaranteed Cost of Ownership Program

• 4-year repair and replacement guarantee
• Annual maintenance service

Key Features

• 3-second response time
• Extended range from 1 ppb to 10,000 ppm with best in class linearity
• Humidity compensation with integral humidity and temperature sensors
• Real-time wireless built-in - Bluetooth (and optional RAELink3 portable modem) or Mesh Network support
• Integrated Correction Factors list of 220 compounds more than any other PID
• Includes flashlight for dark conditions
• Large graphic display presents gas type, Correction Factor and concentration
• Easy access to battery, lamp and sensor in seconds without tools
• Rugged housing withstands use in harsh environments
• IP-67 waterproof design for easy cleaning and decontamination

Application

• Oil & Gas
• HazMat
• Industrial Safety
• Civil Defense
• Environmental & Indoor Air Quality

059-D302-300 UltraRAE 3000+/9.8eV with 10 RAE-Sep™ Tubes for Benzene/Alkaline/Wireless Mesh/Accessory kit (No gas or regulator) by RAE Systems

The UltraRAE 3000+ is one of the most advanced Compound-Specific Monitors on the market. Its Photoionization Detector's (PID) extended range of 0.01 to 10,000 ppm in VOC mode and 10 ppb to 200 ppm in benzene-specific mode makes it an ideal instrument for applications, from entry pre-screening during refinery and plant maintenance to hazardous material response, marine spill response and refinery down-stream monitoring.

• Dual detection mode for total benzene exposure assessment: 60-second snapshot or 15-minute STEL measurement
• High sensitivity to benzene provides a lower detection range for future benzene exposure limits
• Lower risk of false alarms through advanced speciation method
• Total VOC measurement mode with extended range of 0.01 to 10,000 ppm

FEATURES & BENEFITS

• Versatile VOC or Benzene-Specific modes
• Cost effective solution and low-cost RAE-Sep™ tubes
• Reflex PID Technology™
• Highly specific readings, combining a 9.8eV UV lamp and RAE-Sep™ benzene tube
• Built-in humidity sensor with Automatic temperature-controlled sampling time calculation
• See-through Sampling probe design for instant tubebreakthrough visibility
• Highly connectivity capability through multiple wireless module options
• Multi-language support
• Easy access to lamp, sensor and battery in seconds without tools

APPLICATIONS

• Confined space entry pre-screening during refinery and plant maintenance
• Hazardous material response
• Marine spill response
• Refinery down-stream monitoring
• Plant overhaul

MONITOR ONLY INCLUDES:

• UltraRAE 3000+ Monitor, Model PGM-7360
• Wireless communication module built-in
• Travel Charger
• RAE UV lamp and RAE-Sep™ Tubes
• Flex-I-Probe™ and short probe
• External filter
• Red rubber boot
• Alkaline battery adapter
• Lamp-cleaning kit
• Tool kit
• Lithium-ion (Li-Ion) battery with universal AC/DCcharger and international plug kit
• Soft leather carrying case

MONITOR WITH ACCESSORIES KIT:

• Hard transport case with pre-cut foam padding
• Charging/download cradle
• 5 porous metal filters and O-rings
• Organic vapor zeroing kit
• Gas outlet port adapter and tubing

OPTIONAL CALIBRATION KIT ADDS:

• Calibration gas, 34L, as specified
• Calibration regulator and flow controller

OPTIONAL GUARANTEED COST-OF-OWNERSHIP PROGRAM:

• 4-year repair and replacement warranty
• Annual maintenance service

72-2120-302 Digester Gas Monitor, 100% Volume CH4/25% Volume O2/50% Volume CO2 by RKI Instruments

RKI is proud to introduce our Digester Gas Monitor. Gas from waste digesters contains high levels of methane, CO2, and H2S, with little to no oxygen present. The RKI gas monitor checks for all these gases on a cyclic basis. A powerful air aspirator draws a sample from up to 100 feet away. Since digester gas contains high humidity and high H2S, both of which can cause damage to sampling systems, the RKI Digester Gas Monitor is designed to handle these with no damage to the sampling system or sensors. The sample is passed through a series of dirt, dust, and moisture stopping filters, and these filters are automatically purged with fresh air at the end of each cycle.

Measurement time is just 4 minutes, taken at periodic cycles. Cycle time is selectable, with settings for cycle time of 15 minute, 1 hour, 4 hours, 8 hours, or 24 hours. A cycle can also be initiated anytime by pressing a button. After each cycle, the sensors and sampling system are flushed with fresh air so as to minimize corrosion caused by the high H2S content. The system is fault tolerant minimizing the possibility of expensive repairs or downtime.

System integrity is maintained at all times using a flow fail monitoring device which provides a fail alarm and relay if there is ever a problem with the flow system, such as a blockage, or if the air aspirator compressed air supply is removed or interrupted.

The system is housed in a wall mounting NEMA 4X enclosure. The gas readings can be viewed through the enclosure door clear window. Flow meters and filters are easily visible for confirmation of correct flows and operation. The RKI Digester Gas Monitor contains adjustable alarm levels for each gas, and also programmable alarm relays. In addition, the unit provides 4-20mA signals for each gas concentration for connection to an external DCS, PLC, or other site control system. A Modbus output is also available. The outputs are the readings received from the last cycle taken.

Features:

• Corrosion resistant design; Housing designed for extreme environments; Internal construction for extreme samples; Flow system designed to handle corrosive wet samples
• Sample system designed to handle high humidity
• Accurately measures gases with high levels of H2S present
• 100 ft. sample range
• Up to 4 sensors: Methane 0-100% Volume; CO2 0-50% Volume; Oxygen 0-25% Volume; H2S 0-1000 PPM (0-3000 or 0-5000 optional)
• Self draining moisture trap
• Automatic backflush of sampling system
• Long life air aspirator (no moving parts)
• Suitable for inside/outside installations
• NEMA 4X enclosure
• Uses proven RKI technology
• Modular design easy to maintain
• Simple to operate

Industry Applications:

• Wastewater Treatment Digesters
• Biogas Methane
• Animal Farms

*Please note we can only ship RKI products to customers within the United States

72-6AAB-A GX-6000 One Sensor Sample Draw Gas Monitor, LEL/Oxy/H2S/CO/VOC(0-50K ppb 10.6eV)/VOC(0-6K ppm 10.6eV), with alkaline battery pack by RKI Instruments

Simply put, the GX-6000 is a game changer. This powerful hand-held instrument is capable of simultaneously monitoring up to 6 gases. In addition to the standard 4 confined space gases which include combustibles, O2, CO, & H2S, the GX-6000 has 2 additional smart channels that accept PID, IR or super toxic sensors. Equipped with a strong internal sample pump, a man-down alarm, a panic alarm, an LED flashlight, and large auto rotating LCD display, the GX-6000 can operate as a single gas PID unit or a multifunctional tool utilizing all 6 channels. The GX-6000 with a PID sensor will come equipped with a library of over 600 VOC gases to choose from as standard. Choosing from the library is easy with a personalized favorites list of 30 commonly used VOC's as well as a list of 8 of the most recently used VOC's.

The GX-6000 has a rugged design built for the nastiest environments. It is equipped with a removable impact-resistant rubber boot and a dust and water resistant enclosure with an IP-67 rating. With 5 bright LED lights on 3 sides of the instrument, alarms are easily seen from a variety of perspectives. With vibration and loud audible alarm, GX-6000 will easily alert users when needed.

Features

• Monitor up to 6 gases
• 2 smart sensor slots auto recognize PID, IR, and super toxic sensors
• 5 Operating modes: normal, leak check, inert, snap log and bar hole
• Library of over 600 VOCs
• PPM Leak Check mode
• Man-down and panic alarms
• Auto display rotation
• LED Light source
• Internal sample pump
• Glove friendly glow in the dark buttons
• Light weight, small, rugged IP-67 design
• Interchangeable battery packs Li-ion / alkaline
• Operates up to 14 hours on Li-ion battery pack, fully recharges in 3 hours
• Field replaceable sensors, batteries and filters

Applications

• Confined space entry
• Hazmat response teams
• Arson investigation
• Remediation sites
• Perimeter monitoring
• Leak detection
• Landfill monitoring
• Wing tank entry

*Please note we can only ship RKI products to customers within the United States

0699 6447/12 6447 Compressed Air Meter by Testo

The compressed air counters testo 6441 to testo 6444 are designed for the measurement, monitoring and recording of compressed air consumption, and therefore also for the determination of leakages in compressed air systems, consumption-based allocation of costs and the implementation of peak load management. The compressed air counters testo 6441 to testo 6444 record norm volume flow according to the calorimetric principle, which means the measurement procedure is independent of the process pressure and does not cause a permanent pressure drop.

The version testo 6447 offers everything the testo 6446 provides, in addition the removal of the probe under pressure is possible (patented screw fitting). The larger nominal values refer especially to important compressed air pipelines, often the main supply line after preparation.

• Measurement of norm volume flow in the measuring range 6.7 to 27500 m³/h (DN65 to DN350 or 21/2"-10")
• Exchangeable fitting: Probe removal under pressure possible (testo 6447 only)
• Material selectable between galvanized steel and stainless steel
• Highest flexibility thanks to different signal outputs: Analog output 4 to 20 mA (4-wire), Pulse output, 2 switch outputs (parameterizable: consumption or volume flow-dependent, opener, closer, hysteresis, window)
• Built-in totalizer, even without additional analysis unit
• Operating menu with LED display
• Cleanable sensor

SPMF-DF1GB SPM Flex Unit with Dust Separator for Great Britain by Honeywell Analytics

Improving safety and productivity with the most flexible, user-friendly tape-based gas detector for low-level toxics Feel more confident than ever in your plant's safety and uptime.

In your critical operations, where distruptions can cost millions of dollars, do you have the right instrument for your toxic gas monitoring system? One that your workers feel confident using? One that provides the gas intelligence you need?

With SPM Flex, you never have to worry whether your single-point monitor will stand up to harsh conditions whether a false alarm will lead to a costly shutdown, or whether your workers will be able to correctly operate the device.

Instead, you can count on our Chemcassette® tape-based SPM Flex for unmatched accuracy, flexibility and ease of use - even in challenging environments. So you can rest assured that you're keeping your people safe and your operations running.

Rugged and reliable

Stands up to harsh conditions. Working in the sun and rain, around blasts of steam, or other challenging environmental conditions? The SPM Flex goes where you do, standing up to changes in temperature and humidity without compromising accuracy.

It also works well in cleanrooms, thanks to its Teflon coating that doesn't attract dust. And if it's ever exposed to toxic gas or caustic liquid, just hose it down or use a decontamination wipe.

New Enhancements

• Additional gas formulas
• Flip screen
• Duty cycle to reduce Chemcassette® usage
• K-factor multiplier

Crisp, clear visibility - from near and far

Visible at a distance

Thanks to a crisp display and a color-coded LED bar on top of the SPM Flex, you can see alarm status, gas concentration and other data easily from a distance. So even if you're not right next to your SPM Flex, you always know the health of your unit and the safety of your area.

Remote viewing through the web

Your visibility even extends to other rooms and buildings, thanks to the unit's web capabilities. Simply plug an Ethernet cable into the SPM Flex, and use the easy-to-read web interface to see the status of the unit - no matter where you are.

Flexible uses throughout your plant

Thanks to its robust design and intuitive operation, the SPM Flex can perform a variety of roles.

Emergency Response

When your emergency response team needs to respond quickly, the SPM Flex is the best tool for the job. With fast startup, easy operation in hazmat gear and rugged design, the SPM Flex is ready when you are.

Life Safety

The SPM Flex, capable of working as both a fixed and a portable unit, is an important addition to your toxic gas monitoring system. Use it to investigate suspected leaks, or, if you have a monitoring point that's out of service, use the SPM Flex to replace it - with the option to plug it in or use the long-lasting battery.

Tool Maintenance

When your crews need to perform maintenance on a process tool, they can take the SPM Flex with them to ensure safety while they work. With full data logging and an industry leading gas selection, you'll always have the assurance that your staff are safe every day, all day.

Advanced capabilities - no expertise required

Your workers may not use the SPM Flex every day, but when they need it, they'll be able to operate it with confidence. That's because this highly automated single-point monitor is intuitive, easy to use, and designed to fit the unique needs of your operation.

Easy to choose the target gas

Want to monitor for a certain gas? Just turn on the SPM Flex, snap in the proper Chemcassette® tape, and use the intuitive LCD menu to select the gas from the list. Need to monitor for a gas in a different family? Just swap out the Chemcassette tape and choose the new gas. No ChemKeys™ required.

Quick start-up for emergency response

The SPM Flex gets up and running in under two minutes - so your response team can quickly gear up and go to the site.

Easy to use with protective equipment or hazmat gear

Purpose-built with the user experience in mind, the SPM Flex is easy to carry, operate and read - even when you're wearing a hazmat suit or other protective gear. The monitor has large, chunky buttons that are easy to use. And when you carry the SPM Flex, the display faces up so it's easy to read.

Extreme Accuracy for Extreme Gases

The SPM Flex, the next evolution of our SPM and TLD gas detectors with Chemcassette tape technology, is capable of working as both a fixed and a portable unit. The monitor detects the ultrasensitive gases inherent in your operations, including: Hydrides, Mineral acids, Oxidizers, Amine.

Our Chemcassette tape technology shows the presence of gas - quickly and definitively with a physical record. So you can prevent costly downtime from false alarms.

Data logging and information management for total confidence

Access to detailed history

With the SPM Flex, you can rest assured that every monitoring moment is being recorded - and ready for analysis whenever you need it. Whether you want to report a gas incident or investigate a trend, the monitor keeps up to a three-month history of gas concentrations, alarms, tape changes and other factors. Plus, you have the option to view this data through a web server, or you can easily download it to a USB drive.

Easy to adjust configurations

Need to change the detection limit for a gas? Alter the parameters for latching alarms? Just adjust your settings with the intuitive menu - then use the USB port to download and transfer them to other units. So it's a snap to deploy multiple monitors with a consistent configuration.

Designed to the highest standard of reliability

Easy maintenance and long-lasting battery

The SPM Flex has easily serviceable parts and a reliable battery, so you can count on long-lasting portable use - and an affordable cost of ownership. Even more, if the SPM Flex is plugged in and you lose power, the internal battery kicks in as backup so the unit keeps monitoring.

All backed by the history and reputation of Honeywell

With the SPM Flex, like other products from Honeywell, you can have peace of mind from knowing your gas detection equipment is engineered to the highest standard of safety and reliability. We honor the investment you've made, and we're here to support you, giving you complete confidence in your facility's gas safety, compliance and uptime.

Honeywell Gas Detection Offerings

Honeywell gas detectors protect people, assets and environment from toxic and combustible gas hazards, helping to create safer, more comfortable, secure and productive environments. Our strength derives from Honeywell's leadership in sensor technology; in fact Honeywell operates four sensor manufacturing plants, supplying an entire industry with its core detective element.

Commercial

Gas detection from standalone units to fully engineered, multi-point systems, all offering cost-effective regulatory compliance.

• Applications: parking structures, chillers, mechanical rooms, office towers, commercial buildings, shopping centers, swimming pools, golf courses, schools and universities, laboratories

Industrial

Renowned Sieger and Manning gas detection systems with advanced electrochemical, infrared and open path sensing technologies.

• Applications: oil and gas, cold storage, water/wastewater treatment, chemicals, engine rooms, plastics and fibers, agriculture, printing and light industrial

Portables

Single or multi-gas ranging from compact, lightweight designs for personal protection to systems-based, networkable instrumentation for industrial hygiene.

• Applications: underground utility and electricity ducts, boiler rooms, post-fire sites, sewers, industrial plants, industrial hygiene, first responder teams, remote fleets

High Tech/Government

Reliable gas and chemical detection including infrared spectroscopy (MST) with no cross interference, to Chemcassette paper-based solutions (MDA Scientific) offering detection down to parts per billion.

• Applications: semiconductor manufacturing, aerospace propulsion, specialty chemicals industry, research laboratories, emergency response

Technical Services

24/7 global network includes post-sales service and Systems Integration teams.

• Emergency call out, service contracts, on/off-site repair, training and commissioning
• Complete range of spares, consumables and accessories