Water Quality Products, Oakton

WD-35850-12 Buffer Capsules, pH 4; 10/Pk by Oakton

Buffer salts inside capsules require 100 mL of deionized or distilled water to produce a clear pH calibration solution accurate to ±0.02 pH (at 25°C) with traceability to NIST standards. Capsules are easier to store and transport than prepared aqueous buffer solutions. Capsules are color-coded for easy identification if mixed.

Store buffer solution in an airtight container at room temperature for three weeks. Unused capsules have a five-year shelf life. Each vial contains 10 capsules.

Fresh pH calibration solution anytime and anywhere

• Each capsule mixes with 100-mL of deionized water to create a clear, 4.00 pH solution

Includes

Ten red-colored capsules.

WD-35805-65 Accumet pH Electrode, 6x106 mm, Epoxy Body, Single Junction, Sealed by Oakton

Oakton high-performance electrodes are available in a full range of materials, junctions, and sizes to suit your application requirements. New formulation provides additional stability and superior reproducibility.

Affordable, high-accuracy pH electrodes for every application

• The ideal 5-point calibration pH electrode
• Delivers superior reproducibility in aqueous samples

Includes

3.3-ft (1-m) cable with a BNC connector.

WD-35850-02 pH Indicator Strips, 0 to 14, 100/pk by Oakton

Convenient flip-top vials include color comparator chart. Read results immediately after exposing test area to the solution. Strips measure 2-3/4"L x 1/4"W (7 x 2 cm). Each vial contains 100 strips.

Vivid and easy-to-distinguish colors at every pH interval

WD-35850-16 Buffer Capsules, pH 10; 10/Pk by Oakton

Buffer salts inside capsules require 100 mL of deionized or distilled water to produce a clear pH calibration solution accurate to ±0.02 pH (at 25°C) with traceability to NIST standards. Capsules are easier to store and transport than prepared aqueous buffer solutions. Capsules are color-coded for easy identification if mixed.

Store buffer solution in an airtight container at room temperature for three weeks. Unused capsules have a five-year shelf life. Each vial contains 10 capsules.

Fresh pH calibration solution anytime and anywhere

• Each capsule mixes with 100-mL of deionized water to create a clear, 10.00 pH solution

Includes

Ten blue-colored capsules.

WD-00651-06 Traceable® pH Standard Buffer with Calibration, Red, pH 4; 500 mL by Oakton

Oakton pH buffers are compared against, and are traceable to, NIST Standard Reference Materials. Each bottle includes a NIST-traceable calibration report stating accuracy at 25°C to ±0.010 pH. Color-coded and colorless buffers are available in 500-mL, 1-L, or 4-L packaging sizes. Additional values and packaging sizes are available. Store at room temperature.

Certified Reference Materials (CRM) meet federal, state, and or local agencies' strictest mandates, and deliver exact calibration results for any pH meter. A2LA ISO/IEC 17025:2005 (1750.01) (Calibration Laboratory) and ISO Guide 34 (Certified Reference Material Producer) provide highest achievable levels of product production, documentation, and accuracy. Additional accreditations include ISO 31 (content) and ISO 35 (statistical analysis). ISO 9001 ensures that world-class product standards for Materials are always met.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately. NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

NIST-traceable reference materials include a calibration report from an ISO 17034 and ISO 17025 accredited laboratory

• Choose from clear or color-coded standards from common calibration points
• 500 mL (16 fl.oz.) capacity
• Calibrate at pH 4
• Easily identify red color-coded formula

WD-35653-14 Conductivity Calibration Pouches, 12.88 mS; 20/Pk by Oakton

Single-use 20-mL pouches are sealed to ensure freshness - take these convenient standard solutions anywhere! Don't worry about transferring solution into another container - calibrate directly from the pouch.

A μS-to-ppm conversion table is printed on each pack for quick reference.

Sealed for freshness and easy travel

• Tear off a corner, or the entire top - opens wide enough for all probe types
• Notched corners for easy opening from either side
• Calibrate to 12,888 μS or 12.888 mS

WD-00653-36 Conductivity and TDS Standard, 1413 μS; 5 x 60 mL Bottles/Pk by Oakton

• KCl, NaCl and 442 conversions printed on the bottle for ease of use (excluded on 60-mL bottle, but included in insert)
• Temperature corrections are printed on the bottle, with certified values listed in tables and referenced to 25°C (excluded on 60-mL bottle, but included in insert)
• Manufactured under ISO 9000 quality guidelines and traceable to NIST standards
• If unopened, shelf life is 1 year. If opened recommended shelf life is 4 months
• Conductivity options range from 1 μS/cm to 200,000 μS/cm

Convenient 60-mL bottles come in a pack of five - ideal for field use. Grab one when you're on the go!

• All Oakton Conductivity and TDS Standards are traceable to NIST standard reference materials
• Solutions help you calibrate conductivity instruments to ensure accuracy
• Standard values given at 25°C
• Use when readings are expected to be around 1413 μS/cm

WD-00655-36 Traceable® One-Shot™ Buffer Solution, Clear, pH 7.416; 6 x 100 mL Vials by Oakton

• Convenient, single-use vials eliminate concerns of cross-contamination; each pack contains six polyethylene vials with 100-mL of pH buffer per vial
• If unopened, shelf life is 2 years; once opened, use pH 4 and pH 7 within 90 days, pH 10 within 30 days

Oakton® Traceable® One-Shot™ pH Buffer Solutions are supplied with NIST-traceable calibration reports stating accuracy at 25°C to ±0.010 pH, in addition to conversion values for pH/temperature - for the most accurate calibrations!

METHODS SUPPORTED

Certified reference material meets test requirements for Federal, State, and local agencies, CAP, ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA, AWWA, WEF, USGS, USP, and ISO. Traceable® Conductivity Standards complies with and is essential for use in these official methods: AOAC 973.40, EPA 120.1, Standard Method 2510 (APHA, AWWA, WEF), ISO 7888, DIN 38404, ASTM D1125, USGS I-1780, USP 645, and for A2LA/NVLAP accreditations/ISO 9000 certifications. Material may be used to calibrate all conductivity meters and to determine all conductivity cell constants.

A2LA ACCREDITATION ISO/IEC 17025:2005 (1750.01)

To assure accuracy an individually serial-numbered Traceable® Certificate is supplied to indicate traceability to standards provided by NIST (National Institute of Standards and Technology) and/or a National Standards Laboratory. A2LA accredited certification provides the highest achievable level of quality assurance, documentation, and accuracy. Conductivity Standards are produced in an A2LA accredited ISO/IEC 17025:2005 (1750.01) calibration laboratory. Additional certifications include ISO 31 (certificate content) and ISO 35 (statistical analysis), plus ISO 9001 (certified quality manufacturer).

• All Oakton® Traceable® pH buffer solutions are NIST-traceable reference materials
• Supplied with a calibration report from an ISO 17034 and ISO 17025 accredited laboratory
• Individually packed in foil pouch to prevent UV exposure that may degrade accuracy
• Buffer solution lets you calibrate pH instruments to ensure accuracy
• If unopened, shelf life is 2 years
• Use to calibrate pH instruments to 7.416

INCLUDES

individual temperature compensation chart and NIST-Traceable calibration certificate with data

WD-35419-30 pH 550 Benchtop pH Meter Kit by Oakton

The PH 550 benchtop pH meter features a microprocessor chip which provides automatic temperature compensation, data storage, parameter setup, and Max/Min reading display. The meter offers a pH range from 0 to 14 and a three-point automatic calibration, with the ability to recognize standard buffer solutions (USA or NIST series). The advanced digital processing technology improves meter response time and measuring accuracy. A stable reading display icon appears when the measuring value is stable.

The 3-in-1 combination pH electrode measures pH and temperature simultaneously. The compact meter includes a detachable electrode holder and three bottles of pH buffer solution. It has a dustproof and spillproof rating of IP54. Connectors are protected by silicone seal caps.

Economical meter for benchtop pH measurement

• Automatically recognizes calibration solutions
• Compact design saves valuable benchtop space
• Data logging allows you to store and recall up to 50 groups of data
• IP54-rated housing is dust- and spill-proof

INCLUDES

Plastic 3-in-1 combination pH electrode, electrode holder, pH standard buffer solutions (4.00/7.00/10.01 pH, 50 mL each), and 9 VAC power adapter.

WD-00651-08 Traceable® pH Standard Buffer with Calibration, Yellow, pH 7; 500 mL by Oakton

Oakton pH buffers are compared against, and are traceable to, NIST Standard Reference Materials. Each bottle includes a NIST-traceable calibration report stating accuracy at 25°C to ±0.010 pH. Color-coded and colorless buffers are available in 500-mL, 1-L, or 4-L packaging sizes. Additional values and packaging sizes are available. Store at room temperature.

Certified Reference Materials (CRM) meet federal, state, and or local agencies strictest mandates, and deliver exact calibration results for any pH meter. A2LA ISO/IEC 17025:2005 (1750.01) (Calibration Laboratory) and ISO Guide 34 (Certified Reference Material Producer) provide highest achievable levels of product production, documentation, and accuracy. Additional accreditations include ISO 31 (content) and ISO 35 (statistical analysis). ISO 9001 ensures that world-class product standards for Materials are always met.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately. NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

NIST-traceable reference materials include a calibration report from an ISO 17034 and ISO 17025 accredited laboratory

• Choose from clear or color-coded standards from common calibration points
• 500 mL (16 fl.oz.) capacity
• Calibrate at pH 7
• Easily identify red color-coded formula

WD-00651-10 Traceable® pH Standard Buffer with Calibration, Blue, pH 10; 500 mL by Oakton

Oakton pH buffers are compared against, and are traceable to, NIST Standard Reference Materials. Each bottle includes a NIST-traceable calibration report stating accuracy at 25°C to ±0.010 pH. Color-coded and colorless buffers are available in 500-mL, 1-L, or 4-L packaging sizes. Additional values and packaging sizes are available. Store at room temperature.

Certified Reference Materials (CRM) meet federal, state, and or local agencies' strictest mandates, and deliver exact calibration results for any pH meter. A2LA ISO/IEC 17025:2005 (1750.01) (Calibration Laboratory) and ISO Guide 34 (Certified Reference Material Producer) provide highest achievable levels of product production, documentation, and accuracy. Additional accreditations include ISO 31 (content) and ISO 35 (statistical analysis). ISO 9001 ensures that world-class product standards for Materials are always met.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately. NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

NIST-traceable reference materials include a calibration report from an ISO 17034 and ISO 17025 accredited laboratory

• Choose from clear or color-coded standards from common calibration points
• 500 mL (16 fl.oz.) capacity
• Calibrate at pH 10
• Easily identify blue color-coded formula

WD-35850-04 pH Indicator Strips, 5 to 9, 100/pk by Oakton

Convenient flip-top vials include color comparator chart. Read results immediately after exposing test area to the solution. Strips measure 2-3/4"L x 1/4"W (7 x 2 cm). Each vial contains 100 strips.

Vivid and easy-to-distinguish colors at every pH interval

WD-35850-14 Buffer Capsules, pH 7; 10/Pk by Oakton

Buffer salts inside capsules require 100 mL of deionized or distilled water to produce a clear pH calibration solution accurate to ±0.02 pH (at 25°C) with traceability to NIST standards. Capsules are easier to store and transport than prepared aqueous buffer solutions. Capsules are color-coded for easy identification if mixed.

Store buffer solution in an airtight container at room temperature for three weeks. Unused capsules have a five-year shelf life. Each vial contains 10 capsules.

Fresh pH calibration solution anytime and anywhere

• Each capsule mixes with 100-mL of deionized water to create a clear, 7.00 pH solution

Includes

Ten green-colored capsules.

WD-00651-00 Traceable® pH Standard Buffer with Calibration, Clear, pH 4; 500 mL by Oakton

Oakton pH buffers are compared against, and are traceable to, NIST Standard Reference Materials. Each bottle includes a NIST-traceable calibration report stating accuracy at 25°:C to ±0.010 pH. Color-coded and colorless buffers are available in 500-mL, 1-L, or 4-L packaging sizes. Additional values and packaging sizes are available. Store at room temperature.

Certified Reference Materials (CRM) meet federal, state, and or local agencies' strictest mandates, and deliver exact calibration results for any pH meter. A2LA ISO/IEC 17025:2005 (1750.01) (Calibration Laboratory) and ISO Guide 34 (Certified Reference Material Producer) provide highest achievable levels of product production, documentation, and accuracy. Additional accreditations include ISO 31 (content) and ISO 35 (statistical analysis). ISO 9001 ensures that world-class product standards for Materials are always met.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately. NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

NIST-traceable reference materials include a calibration report from an ISO 17034 and ISO 17025 accredited laboratory

• Choose from clear or color-coded standards from common calibration points
• 500 mL (16 fl.oz.) capacity
• Calibrate at pH 4

WD-00652-50 Traceable® Conductivity and TDS Standard, Individually-Tested, 1413 μS; 500 mL by Oakton

• Oakton® Traceable® conductivity and TDS standards have detailed labels: KCl, NaCl, and 442 conversions, temperature corrections, and certified values referenced to 25°C-convenient!!
• Average accuracy at 25°C is ±0.25 microsiemens for 1, 5, 10 microsiemen (μS) solutions, or ±0.25% for all other solutions. The tested uncertainty is shown on the certificate, whichever is greater
• Conductivity options range from 1 to 200,000 μS/cm
• Individually-tested solutions are certified by the bottle - each bottle is analyzed for the best accuracy

METHODS SUPPORTED

Certified reference material meets test requirements for Federal, State, and local agencies, CAP, ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA, AWWA, WEF, USGS, USP, and ISO. Traceable® Conductivity Standards complies with and is essential for use in these official methods: AOAC 973.40, EPA 120.1, Standard Method 2510 (APHA, AWWA, WEF), ISO 7888, DIN 38404, ASTM D1125, USGS I-1780, USP 645, and for A2LA/NVLAP accreditations/ISO 9000 certifications. Material may be used to calibrate all conductivity meters and to determine all conductivity cell constants.

A2LA ACCREDITATION ISO/IEC 17025:2005 (1750.01)

To assure accuracy an individually serial-numbered Traceable® Certificate is supplied to indicate traceability to standards provided by NIST (National Institute of Standards and Technology) and/or a National Standards Laboratory. A2LA accredited certification provides the highest achievable level of quality assurance, documentation, and accuracy. Conductivity Standards are produced in an A2LA accredited ISO/IEC 17025:2005 (1750.01) calibration laboratory. Additional certifications include ISO 31 (certificate content) and ISO 35 (statistical analysis), plus ISO 9001 (certified quality manufacturer).

• All Oakton® Traceable® conductivity standards are NIST-traceable reference materials
• Supplied with a calibration report from an ISO 17034 and ISO 17025 accredited laboratory
• These standard solutions let you calibrate conductivity instruments to ensure accuracy
• If unopened, shelf life is one year; once opened, shelf life will vary by solution value
• Use when readings are expected to be around 1413 μS/cm

INCLUDES

temperature compensation chart, TDS conversion chart, and NIST-traceable calibration certificate with data.

WD-00652-34 Traceable® Conductivity and TDS Standard, Batch-Tested, 100,000 μS; 500 mL by Oakton

• Oakton® Traceable® conductivity and TDS standards have detailed labels: KCl, NaCl, and 442 conversions, temperature corrections, and certified values referenced to 25°C-convenient!!
• Average accuracy at 25°C is ±0.25 microsiemens for 1, 5, 10 microsiemen (μS) solutions, or ±0.25% for all other solutions. The tested uncertainty is shown on the certificate, whichever is greater
• Conductivity options range from 1 to 200,000 μS/cm
• Batch-tested solutions are lot certified; a few bottles from a single lot are analyzed

METHODS SUPPORTED

Certified reference material meets test requirements for Federal, State, and local agencies, CAP, ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA, AWWA, WEF, USGS, USP, and ISO. Traceable® Conductivity Standards complies with and is essential for use in these official methods: AOAC 973.40, EPA 120.1, Standard Method 2510 (APHA, AWWA, WEF), ISO 7888, DIN 38404, ASTM D1125, USGS I-1780, USP 645, and for A2LA/NVLAP accreditations/ISO 9000 certifications. Material may be used to calibrate all conductivity meters and to determine all conductivity cell constants.

A2LA ACCREDITATION ISO/IEC 17025:2005 (1750.01)

To assure accuracy an individually serial-numbered Traceable® Certificate is supplied to indicate traceability to standards provided by NIST (National Institute of Standards and Technology) and/or a National Standards Laboratory. A2LA accredited certification provides the highest achievable level of quality assurance, documentation, and accuracy. Conductivity Standards are produced in an A2LA accredited ISO/IEC 17025:2005 (1750.01) calibration laboratory. Additional certifications include ISO 31 (certificate content) and ISO 35 (statistical analysis), plus ISO 9001 (certified quality manufacturer).

• All Oakton® Traceable® conductivity standards are NIST-traceable reference materials
• Supplied with a calibration report from an ISO 17034 and ISO 17025 accredited laboratory
• These standard solutions let you calibrate conductivity instruments to ensure accuracy
• If unopened, shelf life is one year; once opened, shelf life will vary by solution value
• Use when readings are expected to be around 100,000 μS/cm

INCLUDES

temperature compensation chart, TDS conversion chart, and NIST-traceable calibration certificate with data.

WD-05993-77 Cole-Parmer® Threaded In-Line Housing with Guard by Oakton

Simply slip an electrode into this housing and screw it into a tee fitting. Pipe tee connection is 1/2" NPT(M). Includes a VITON O-ring. KYNAR construction provides a superior chemical resistance. Maximum pressure: 150 psi.

Guarded models increase electrode life. KYNAR model is suitable for harsh chemicals. Stainless steel (SS) guard models is ideal for food and high-temperature applications. Housings measures 3-13/16"L x 1" dia.

WD-00652-76 Traceable® One-Shot™ Conductivity and TDS Standard, 150,000 μS; 6 x 100 mL Vials by Oakton

• Oakton® Traceable® conductivity and TDS standards have detailed labels: KCl, NaCl, and 442 conversions, temperature corrections, and certified values referenced to 25°C-convenient!!
• Average accuracy at 25°C is ±0.25 microsiemens for 1, 5, 10 microsiemen (μS) solutions, or ±0.25% for all other solutions. The tested uncertainty is shown on the certificate, whichever is greater
• Conductivity options range from 1 to 200,000 μS/cm
• Batch-tested solutions are lot certified; a few bottles from a single lot are analyzed

METHODS SUPPORTED

Certified reference material meets test requirements for Federal, State, and local agencies, CAP, ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA, AWWA, WEF, USGS, USP, and ISO. Traceable® Conductivity Standards complies with and is essential for use in these official methods: AOAC 973.40, EPA 120.1, Standard Method 2510 (APHA, AWWA, WEF), ISO 7888, DIN 38404, ASTM D1125, USGS I-1780, USP 645, and for A2LA/NVLAP accreditations/ISO 9000 certifications. Material may be used to calibrate all conductivity meters and to determine all conductivity cell constants.

A2LA ACCREDITATION ISO/IEC 17025:2005 (1750.01)

To assure accuracy an individually serial-numbered Traceable® Certificate is supplied to indicate traceability to standards provided by NIST (National Institute of Standards and Technology) and/or a National Standards Laboratory. A2LA accredited certification provides the highest achievable level of quality assurance, documentation, and accuracy. Conductivity Standards are produced in an A2LA accredited ISO/IEC 17025:2005 (1750.01) calibration laboratory. Additional certifications include ISO 31 (certificate content) and ISO 35 (statistical analysis), plus ISO 9001 (certified quality manufacturer).

• All Oakton® Traceable® conductivity standards are NIST-traceable reference materials
• Supplied with a calibration report from an ISO 17034 and ISO 17025 accredited laboratory
• These standard solutions let you calibrate conductivity instruments to ensure accuracy
• If unopened, shelf life is one year; once opened, shelf life will vary by solution value
• Use when readings are expected to be around 150,000 μS/cm

INCLUDES

temperature compensation chart, TDS conversion chart, and NIST-traceable calibration certificate with data.

WD-00651-30 Traceable® pH Standard Buffer with Calibration, Clear, pH 4, 1000 mL by Oakton

Oakton pH buffers are compared against, and are traceable to, NIST Standard Reference Materials. Each bottle includes a NIST-traceable calibration report stating accuracy at 25°C to ±0.010 pH. Color-coded and colorless buffers are available in 500-mL, 1-L, or 4-L packaging sizes. Additional values and packaging sizes are available. Store at room temperature.

Certified Reference Materials (CRM) meet federal, state, and or local agencies' strictest mandates, and deliver exact calibration results for any pH meter. A2LA ISO/IEC 17025:2005 (1750.01) (Calibration Laboratory) and ISO Guide 34 (Certified Reference Material Producer) provide highest achievable levels of product production, documentation, and accuracy. Additional accreditations include ISO 31 (content) and ISO 35 (statistical analysis). ISO 9001 ensures that world-class product standards for Materials are always met.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately. NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

NIST-traceable reference materials include a calibration report from an ISO 17034 and ISO 17025 accredited laboratory

• Choose from clear or color-coded standards from common calibration points
• 1000 mL (32 fl.oz.) capacity
• Calibrate at pH 4

WD-00652-55 Traceable® Conductivity and TDS Standard, Batch-Tested, 200,000 μS; 500 mL by Oakton

• Oakton® Traceable® conductivity and TDS standards have detailed labels: KCl, NaCl, and 442 conversions, temperature corrections, and certified values referenced to 25°C-convenient!!
• Average accuracy at 25°C is ±0.25 microsiemens for 1, 5, 10 microsiemen (μS) solutions, or ±0.25% for all other solutions. The tested uncertainty is shown on the certificate, whichever is greater
• Conductivity options range from 1 to 200,000 μS/cm
• Individually-tested solutions are certified by the bottle - each bottle is analyzed for the best accuracy

METHODS SUPPORTED

Certified reference material meets test requirements for Federal, State, and local agencies, CAP, ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA, AWWA, WEF, USGS, USP, and ISO. Traceable® Conductivity Standards complies with and is essential for use in these official methods: AOAC 973.40, EPA 120.1, Standard Method 2510 (APHA, AWWA, WEF), ISO 7888, DIN 38404, ASTM D1125, USGS I-1780, USP 645, and for A2LA/NVLAP accreditations/ISO 9000 certifications. Material may be used to calibrate all conductivity meters and to determine all conductivity cell constants.

A2LA ACCREDITATION ISO/IEC 17025:2005 (1750.01)

To assure accuracy an individually serial-numbered Traceable® Certificate is supplied to indicate traceability to standards provided by NIST (National Institute of Standards and Technology) and/or a National Standards Laboratory. A2LA accredited certification provides the highest achievable level of quality assurance, documentation, and accuracy. Conductivity Standards are produced in an A2LA accredited ISO/IEC 17025:2005 (1750.01) calibration laboratory. Additional certifications include ISO 31 (certificate content) and ISO 35 (statistical analysis), plus ISO 9001 (certified quality manufacturer).

• All Oakton® Traceable® conductivity standards are NIST-traceable reference materials
• Supplied with a calibration report from an ISO 17034 and ISO 17025 accredited laboratory
• These standard solutions let you calibrate conductivity instruments to ensure accuracy
• If unopened, shelf life is one year; once opened, shelf life will vary by solution value
• Use when readings are expected to be around 200,000 μS/cm

INCLUDES

temperature compensation chart, TDS conversion chart, and NIST-traceable calibration certificate with data.

WD-56105-60 Cole-Parmer BNC-to-Stripped Wire Adapter by Oakton

Replace or upgrade electrodes, probes, cells, and parts for Cole-Parmer meters. Many of these items are compatible with other brands of meter. Please contact an application specialist for assistance.

Use this female BNC-to-stripped wire end connector to simplfy connection and replacement of pH/ORP electrodes with male BNC connections to transmitters and controllers with terminal block connectors.

WD-00652-20 Traceable® Conductivity and TDS Standard, Batch-Tested, 1 μS; 500 mL by Oakton

• Oakton® Traceable® conductivity and TDS standards have detailed labels: KCl, NaCl, and 442 conversions, temperature corrections, and certified values referenced to 25°C-convenient!!
• Average accuracy at 25°C is ±0.25 microsiemens for 1, 5, 10 microsiemen (μS) solutions, or ±0.25% for all other solutions. The tested uncertainty is shown on the certificate, whichever is greater
• Conductivity options range from 1 to 200,000 μS/cm
• Batch-tested solutions are lot certified; a few bottles from a single lot are analyzed

METHODS SUPPORTED

Certified reference material meets test requirements for Federal, State, and local agencies, CAP, ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA, AWWA, WEF, USGS, USP, and ISO. Traceable® Conductivity Standards complies with and is essential for use in these official methods: AOAC 973.40, EPA 120.1, Standard Method 2510 (APHA, AWWA, WEF), ISO 7888, DIN 38404, ASTM D1125, USGS I-1780, USP 645, and for A2LA/NVLAP accreditations/ISO 9000 certifications. Material may be used to calibrate all conductivity meters and to determine all conductivity cell constants.

A2LA ACCREDITATION ISO/IEC 17025:2005 (1750.01)

To assure accuracy an individually serial-numbered Traceable® Certificate is supplied to indicate traceability to standards provided by NIST (National Institute of Standards and Technology) and/or a National Standards Laboratory. A2LA accredited certification provides the highest achievable level of quality assurance, documentation, and accuracy. Conductivity Standards are produced in an A2LA accredited ISO/IEC 17025:2005 (1750.01) calibration laboratory. Additional certifications include ISO 31 (certificate content) and ISO 35 (statistical analysis), plus ISO 9001 (certified quality manufacturer).

• All Oakton® Traceable® conductivity standards are NIST-traceable reference materials
• Supplied with a calibration report from an ISO 17034 and ISO 17025 accredited laboratory
• These standard solutions let you calibrate conductivity instruments to ensure accuracy
• If unopened, shelf life is one year; once opened, shelf life will vary by solution value
• Use when readings are expected to be around 1 μS/cm

INCLUDES

temperature compensation chart, TDS conversion chart, and NIST-traceable calibration certificate with data.

WD-35420-01 RS-232 Interface Cable for Advanced pH/Ion Meters by Oakton

Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample. For your convenience, cables, power adapters, and other accessories are available for your Oakton meters and pocket testers.

Works with 2700 and 450 meters.

WD-00651-72 Traceable® pH Standard Buffer with Calibration, Clear, pH 7, 4 L by Oakton

Oakton pH buffers are compared against, and are traceable to, NIST Standard Reference Materials. Each bottle includes a NIST-traceable calibration report stating accuracy at 25°C to ±0.010 pH. Color-coded and colorless buffers are available in 500-mL, 1-L, or 4-L packaging sizes. Additional values and packaging sizes are available. Store at room temperature.

Certified Reference Materials (CRM) meet federal, state, and or local agencies' strictest mandates, and deliver exact calibration results for any pH meter. A2LA ISO/IEC 17025:2005 (1750.01) (Calibration Laboratory) and ISO Guide 34 (Certified Reference Material Producer) provide highest achievable levels of product production, documentation, and accuracy. Additional accreditations include ISO 31 (content) and ISO 35 (statistical analysis). ISO 9001 ensures that world-class product standards for Materials are always met.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately. NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

NIST-traceable reference materials include a calibration report from an ISO 17034 and ISO 17025 accredited laboratory

• Choose from clear or color-coded standards from common calibration points
• 4 L (128 fl.oz.) capacity
• Calibrate at pH 7