Water Quality Products, Oakton

WD-35805-62 Accumet pH Electrode, 12x106 mm, Epoxy Body, Single Junction, Refill by Oakton

Oakton high-performance electrodes are available in a full range of materials, junctions, and sizes to suit your application requirements. New formulation provides additional stability and superior reproducibility.

Affordable, high-accuracy pH electrodes for every application

• The ideal 5-point calibration pH electrode
• Delivers superior reproducibility in aqueous samples

Includes

3.3-ft (1-m) cable with a BNC connector.

WD-35805-63 Accumet pH Electrode, 12x106 mm, Epoxy Body, Double Junction, Refill by Oakton

Oakton high-performance electrodes are available in a full range of materials, junctions, and sizes to suit your application requirements. New formulation provides additional stability and superior reproducibility.

Affordable, high-accuracy pH electrodes for every application

• The ideal 5-point calibration pH electrode
• Delivers superior reproducibility in aqueous samples

Includes

3.3-ft (1-m) cable with a BNC connector.

WD-35805-64 Accumet pH Electrode, 12x106 mm, Epoxy Body, Single Junction, Refillable by Oakton

Oakton high-performance electrodes are available in a full range of materials, junctions, and sizes to suit your application requirements. New formulation provides additional stability and superior reproducibility.

Affordable, high-accuracy pH electrodes for every application

• The ideal 5-point calibration pH electrode
• Delivers superior reproducibility in aqueous samples

Includes

3.3-ft (1-m) cable with a BNC connector.

WD-35805-65 Accumet pH Electrode, 6x106 mm, Epoxy Body, Single Junction, Sealed by Oakton

Oakton high-performance electrodes are available in a full range of materials, junctions, and sizes to suit your application requirements. New formulation provides additional stability and superior reproducibility.

Affordable, high-accuracy pH electrodes for every application

• The ideal 5-point calibration pH electrode
• Delivers superior reproducibility in aqueous samples

Includes

3.3-ft (1-m) cable with a BNC connector.

WD-35805-66 Accumet pH Electrode, 12x106 mm, Epoxy Body, Double Junction, Sealed by Oakton

Oakton high-performance electrodes are available in a full range of materials, junctions, and sizes to suit your application requirements. New formulation provides additional stability and superior reproducibility.

Affordable, high-accuracy pH electrodes for every application

• The ideal 5-point calibration pH electrode
• Delivers superior reproducibility in aqueous samples

Includes

3.3-ft (1-m) cable with a BNC connector.

WD-35805-67 Accumet Fast Response pH Electrode, 12x110 mm, Glass Body, Double Junction, Refill by Oakton

Oakton high-performance electrodes are available in a full range of materials, junctions, and sizes to suit your application requirements. New formulation provides additional stability and superior reproducibility.

Affordable, high-accuracy pH electrodes for every application

• The ideal 5-point calibration pH electrode
• Delivers superior reproducibility in aqueous samples

Includes

3.3-ft (1-m) cable with a BNC connector.

WD-35805-68 Accumet Fast Response pH Electrode, 6x106 mm, Glass Body, Double Junction, Refill by Oakton

Oakton high-performance electrodes are available in a full range of materials, junctions, and sizes to suit your application requirements. New formulation provides additional stability and superior reproducibility.

Affordable, high-accuracy pH electrodes for every application

• The ideal 5-point calibration pH electrode
• Delivers superior reproducibility in aqueous samples

Includes

3.3-ft (1-m) cable with a BNC connector.

WD-35805-69 Accumet Fast Response pH Electrode, 12x110 mm, Epoxy Body, Double Junction, Sealed by Oakton

Oakton high-performance electrodes are available in a full range of materials, junctions, and sizes to suit your application requirements. New formulation provides additional stability and superior reproducibility.

Affordable, high-accuracy pH electrodes for every application

• The ideal 5-point calibration pH electrode
• Delivers superior reproducibility in aqueous samples

Includes

3.3-ft (1-m) cable with a BNC connector.

WD-35850-02 pH Indicator Strips, 0 to 14, 100/pk by Oakton

Convenient flip-top vials include color comparator chart. Read results immediately after exposing test area to the solution. Strips measure 2-3/4"L x 1/4"W (7 x 2 cm). Each vial contains 100 strips.

Vivid and easy-to-distinguish colors at every pH interval

WD-35850-04 pH Indicator Strips, 5 to 9, 100/pk by Oakton

Convenient flip-top vials include color comparator chart. Read results immediately after exposing test area to the solution. Strips measure 2-3/4"L x 1/4"W (7 x 2 cm). Each vial contains 100 strips.

Vivid and easy-to-distinguish colors at every pH interval

WD-35850-08 Accumet pH Test Paper, 0 to 13 Indicator Roll by Oakton

Oakton pH indicator paper features a 1.0 pH unit interval across the entire range. Packed in a plastic dispenser with an extra-large color comparator chart, the test paper features vivid and easily distinguished colors provide an instant result. Paper roll measures 1/2" wide x 50-ft long (1.3 cm x 15.2 m), enough for approximately 150 tests.

Double-wide continuous paper roll is glove friendly

WD-35850-12 Buffer Capsules, pH 4; 10/Pk by Oakton

Buffer salts inside capsules require 100 mL of deionized or distilled water to produce a clear pH calibration solution accurate to ±0.02 pH (at 25°C) with traceability to NIST standards. Capsules are easier to store and transport than prepared aqueous buffer solutions. Capsules are color-coded for easy identification if mixed.

Store buffer solution in an airtight container at room temperature for three weeks. Unused capsules have a five-year shelf life. Each vial contains 10 capsules.

Fresh pH calibration solution anytime and anywhere

• Each capsule mixes with 100-mL of deionized water to create a clear, 4.00 pH solution

Includes

Ten red-colored capsules.

WD-35850-14 Buffer Capsules, pH 7; 10/Pk by Oakton

Buffer salts inside capsules require 100 mL of deionized or distilled water to produce a clear pH calibration solution accurate to ±0.02 pH (at 25°C) with traceability to NIST standards. Capsules are easier to store and transport than prepared aqueous buffer solutions. Capsules are color-coded for easy identification if mixed.

Store buffer solution in an airtight container at room temperature for three weeks. Unused capsules have a five-year shelf life. Each vial contains 10 capsules.

Fresh pH calibration solution anytime and anywhere

• Each capsule mixes with 100-mL of deionized water to create a clear, 7.00 pH solution

Includes

Ten green-colored capsules.

WD-35850-16 Buffer Capsules, pH 10; 10/Pk by Oakton

Buffer salts inside capsules require 100 mL of deionized or distilled water to produce a clear pH calibration solution accurate to ±0.02 pH (at 25°C) with traceability to NIST standards. Capsules are easier to store and transport than prepared aqueous buffer solutions. Capsules are color-coded for easy identification if mixed.

Store buffer solution in an airtight container at room temperature for three weeks. Unused capsules have a five-year shelf life. Each vial contains 10 capsules.

Fresh pH calibration solution anytime and anywhere

• Each capsule mixes with 100-mL of deionized water to create a clear, 10.00 pH solution

Includes

Ten blue-colored capsules.

WD-53405-42 ECDOCTP2000PPG Instruments DO 2000 Polarographic DO Controller; 1/4-DIN, 80-250V by Oakton

The polarographic DO 2000 controller gives fast, reliable results with minimal flow rates and short polarization times. Polarographic, also referred to as amperometric, DO systems are commonly used in biological processes due to the compatibility of the probe materials.

The controller has four relays with time delay capabilities-- two set point relays, one wash relay, and one alarm relay. Dual-scalable 4 to 20 mA outputs for DO and temperature provide data for control or recording. Menu-driven setup program with three-level password protection provides easy and secure programming. UV-protected LCD with back lighting allows installation in wet environments and visibility in low light environments.

Packed with features for fermentation, aquaculture, or industrial applications

• On/off, proportional, and proportional-integral control mode options
• Ingress protection of NEMA 4X (IP66)
• 1% full-scale accuracy

WD-55510-38 Rugged pH Electrode,12x110mm, Glass Body, Double Junction, Refill by Oakton

Cole-Parmer high-performance electrodes are available in a full range of materials, junctions, and sizes to suit your application requirements. New formulation provides additional stability and superior reproducibility over entire pH range. Fill solution purchased seperately, 05992-47 for single junction, 05992-48 for double juncion electrodes

Affordable, high-accuracy pH electrodes for every application

• The ideal 5-point calibration pH electrode
• Delivers superior reproducibility in aqueous samples

Includes

3.3-ft (1-m) cable with a BNC connector.

WD-56105-60 Cole-Parmer BNC-to-Stripped Wire Adapter by Oakton

Replace or upgrade electrodes, probes, cells, and parts for Cole-Parmer meters. Many of these items are compatible with other brands of meter. Please contact an application specialist for assistance.

Use this female BNC-to-stripped wire end connector to simplfy connection and replacement of pH/ORP electrodes with male BNC connections to transmitters and controllers with terminal block connectors.

WD-59002-75 "All-in-one" pH Probe with ATC for 300/310 Series Meters by Oakton

Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample.

WD-98768-04 Replacement Probe for 19601-08 by Oakton

Replace or upgrade electrodes, probes, cells, and parts for Traceable meters.

Optimize performance of your conductivity and pH/ORP meters

• Get accurate, reliable measurements with these replacement probes and adapters
• Suitable for use with conductivity meter 19601-08

WD-98768-38 Replacement Acrylic Probe Guard for 19601-26 and 19601-10 by Oakton

Replace or upgrade electrodes, probes, cells, and parts for Cole-Parmer meters. Many of these items are compatible with other brands of meter. Please contact an application specialist for assistance.