Oakton

WD-35820-62 Industrial Conductivity Cell, 25 ft Cable, Epoxy Body, Graphite Sensor, K=1.0. Requires Threaded Housing; Order Separately (Use with CON 100, CON 200, CON 1000, and RES 1000 controllers) by Oakton

Feature built-in temperature compensation

• Designed for continuous in-line monitoring
• Feature stripped ends for easy wiring

Choose from three different cell constants:

• K = 1.0 for midrange conductivity measurements.
• K = 10.0 for high conductivity measurements (near or above 20 mS)
• K = 0.1 for low conductivity measurements (near or below 20 µS)
• K = 0.01 for resistivity measurements (at or below 2 µS)

Install these rugged cells in a pipeline, or submerse in a tank.

Dimensions: 142 mm L x 12 mm dia. Shpg wt 0.5 lb.

WD-35608-50 Conductivity/TDS Cell, Ultem Body, Steel Sensor, 3 ft Cable, K=1.0 by Oakton

Feature built-in temperature compensation

• Ultem Cells with K = 1.0 have removable a probe guard for easy cleaning

Choose from three different cell constants:

• K = 1.0 for midrange conductivity measurements.
• K = 10.0 for high conductivity measurements (near or above 20 mS)
• K = 0.1 for low conductivity measurements (near or below 20 µS)

Each conductivity/TDS cell has a temperature range of 0 to 100°C.

WD-35631-00 pH/CON 300 Portable Waterproof pH/Conductivity/TDS/°C/°F Meter with Electrode & Probe by Oakton

The one meter you need for taking conductivity, TDS, pH and temperature readings in rugged environments!

The microprocessor-based OAKTON waterproof pH/CON 300 meter meets IP67 ratings for dustproof and waterproof ingress protection.

Advanced setup mode lets you customize meter parameters, view calibration values for pH and conductivity (TDS), view pH electrode slope for diagnostic purposes, and more. All functions are accessible from the waterproof keypad.

• Waterproof and dustproof housing (IP67 rating) that floats!
• Reads pH, conductivity, TDS and temperature in °C/°F
• Dual display of measurement plus temperature
• Easy push-button conductivity and pH calibration
• Auto-ranging for conductivity measurements; Auto-buffer recognition for pH calibration
• Features selectable automatic endpoint display to "hold" reading when it is stable for more than five seconds
• Selectable Manual or Automatic Temperature
• Compensation with separate temperature readout
• Easy to clean housing
• Hold function; "Ready" indicator; Error messages; Auto-off function

WD-35607-80 CON 11 Portable Conductivity/TDS Meter with Kit by Oakton

Toggle between TDS and conductivity readings

These easy-to-use meters are perfect for taking routine measurements. Take conductivity and TDS measurements across five ranges! Dual display shows temperature simultaneously with conductivity or TDS measurement. Store up to five calibration points and one TDS conversion factor for highest accuracy.

• Automatic temperature compensation (ATC) corrects changes in conductivity due to temperature changes of the solution.
• Auto-ranging selects the right range for best resolution and fastest response.
• Dual LCD lets you view conductivity (or TDS) and temperature.

WD-39643-00 Digi-Sense Palm-Sized Infrared Thermometer by Digi-Sense

Laser sighting and adjustable emissivity at an economical price

This infrared thermometer provides quick and accurate temperature measurements. View the current temperature, temperature scale (°F or °C), and battery life icon on the large LCD. Two battery compartments provide power to the thermometer and laser separately.

This gives the flexibility to measure temperature without the laser sighting if the laser battery is weak. Other features include selectable °F/°C, min/max measurements, lock function for continuous monitoring, automatic data hold, auto off, and battery life icon.

• Includes CR2032 batteries (2)
• Compact, ergonomic design provides a comfortable fit during use
• Fits perfectly in your hand or pocket

WD-35634-30 pHTestr 30 Portable Waterproof pH Tester by Oakton

Dual Display of pH and Temperature

High ±0.01 pH accuracy in a waterproof pocket-sized instrument! This unique Testr display pH and °C readings on a single large display. It also features a Double-junction electrode ideal for dirty water and solutions with heavy metals or other contaminants. Its waterproof, dustproof housing protects Testr from rugged field or plant environments.

• High ±0.01 pH accuracy
• Simultaneous pH and temperature (°C) display
• Suitable for most ASTM and EPA test procedures
• Double-junction electrode ideal for dirty water, heavy sulfides, tris buffers and organics
• Increased reference gel volume offers significantly longer electrode life
• Certifiable to IP67 standards waterproof and dustproof housing floats
• Replaceable sensor lets you reuse same meter body, saving you money
• Automatic temperature compensation
• Three point push-button calibration

WD-00653-04 pH/ORP Electrode Storage Solution 500 mL (1-pint) Bottle by Oakton

Solutions to clean, store and fill electrodes

Electrode storage solution keeps pH/ORP electrode bulbs moist for faster, more accurate readings. Use storage solution with electrode saver bottle WD-35805-50 (included with all Oakton 12 mm electrodes) to extend the life of your electrode and maintain accurate readings. Accepts pH electrodes up to 12 mm in dia.

General-purpose pH/ORP electrode cleaning solution removes build-up from electrodes and maintains electrode sensitivity.

Storage and cleaning solutions come in 1 pint bottles.

Use the reference fill solutions with refillable pH electrodes.

• Extend the life of your electrodes and maintain accurate readings
• Use cleaning and storage solution with any pH or ORP electrodes

WD-35419-03 pH 700 Benchtop Meter with "All-in-one" pH Electrode, 110/220 VAC, 50/60 Hz by Oakton

The easy-to-use, microprocessor-based pH 700 benchtop meter measures pH, mV, relative mV, and temperature. The large, dual-display LCD provides excellent visibility even from a distance. Automatic temperature compensation (ATC) maintains reading accuracy even with fluctuating temperatures. Five-point pH calibration, with automatic buffer recognition for both USA (pH 1.68, 4.01, 7.00, 10.01, 12.45) and NIST (pH 1.68, 4.01, 6.86, 9.18, 12.45) pH buffers, makes for easy calibration no matter which requirement you need to meet. Meter features HOLD, ATC, and electrode diagnostics. The convenient pull-out quick reference card keeps procedures handy at all times. Meter accepts any pH or ORP electrodes with a BNC connector.

As always, our waterproof meters are IP67-rated for both dust and water intrusion. Even with no probes attached!

• Compact footprint is over 40% smaller than other benchtop meters
• Large display permits easier readout viewing
• Datalogging allows you to store and recall up to 100 data sets