MSA

Galaxy GX2 Automated Test System by MSA

MSA is committed to providing the very best in sensor cell technology. From instrument design and manufacturing to datalogging and report generating software, MSA has consistently delivered products designed to optimize workplace safety and take an active approach to advancing jobsite performance. With the new Galaxy GX2 Automated Test System, MSA takes safety and technology to a whole new level.

Advanced MSA Link Pro Software

The MSA Link Pro Software is a state of the art datalogging system that allows users to analyze all data at any time. The software is easy to set up and configure to user specifications. The dashboard will provide alerts on all conditions, gas calibrations, and maintenance information (including expiration warnings). With the software, users can research data, generate reports, and send automatic email exposure alerts. Users can even generate live results or schedule emails for detector activities. Essentially, the datalogging capabilities allow worksite safety managers effectively and efficiently organize all data obtained throughout the entire gas detection fleet.

Simple User Friendly Design

The new Galaxy GX2 Automated Test System was designed with ease of use and simplicity in mind. The test system features an intuitive color touch screen for easy setup and viewing. The touch buttons are large and feature a scrolling screen with pop up test results. Simply place any compatible Galaxy gas detector onto the automated test system and the system will automatically test, calibrate, and charge. The system allows up to 10 devices and 4 cylinder holders. When using RFID-tagged gas cylinders, gas cylinder information is automatically entered into the system, and the onscreen gas cylinder pressure gauge can display multiple cylinder statuses at the same time.

Users can also see the testing and battery status of devices quickly through the colored LED indicators. With the simple time efficient automatic testing, the Galaxy GX2 Automated Test System can save users up to 50% of calibration costs.

Automated Test System Features

The Galaxy GX2 Automated Test System features 18 different languages with easy language setup options. The system is also optimized for use with MSA s high performing X-Cell Sensors. The advanced MSA X-Cell Sensor technology has a long life, quick bump test, fast calibration, and less clear times.

Galaxy GX2 Automated Test System Specifications

The Galaxy GX2 Automated Test System comes standard with pre-configured plugs, barbs, fresh air filters, spare parts kit, power supply and plug, Ethernet cable, and screen protector. MSA also offers nearly two dozen optional accessories that can be used to customize the automatic test system to meet individual workplace needs.

The automatic test system operates on 100-200 VAC (47-63 Hz). The entire unit is approximately 12 inches high and 6.5 inches wide.

The new Galaxy GX2 Automated Test System provides a simple and efficient approach to testing, calibration, and charging. With numerous user features, advanced software, optional accessories, and automatic cost reduction, the automated test system is an automatic choice for workplace safety managers.

10154080 Altair 2X Single Gas Detector, CL2 (0.5, 1.0) Charcoal by MSA

Introducing the ALTAIR 2X Gas Detector from MSA; the first one or two gas detector that incorporates industry-leading XCell Sensor Technology to deliver unparalleled performance while drastically minimizing total cost of ownership, increasing durability and delivering enhanced worker safety, compliance and traceability.

The Altair 2X is also the first portable gas detector to introduce revolutionary XCell Pulse Technology. Based on proven science and advanced patented sensor capabilities, the Altair 2XP detector delivers the world's first stand-alone bump test. This allows a daily bump test to be performed without the need for calibration accessories or specific calibration gas.

ALTAIR 2XP Gas Detector with xCell Pulse Technology

ALTAIR 2xT Two-Tox Gas Detector

ALTAIR 2X Single Gas Detector

Features & Benefits

Low cost of ownership

• Fastest sensor response times, lowest calibration gas flow rate on the market
• 4-year expected instrument & sensor life
• 3-year warranty on instrument & most sensors (2 years on Cl2, NH3)
• Stand-alone bump tests reduce maintenance, increase productivity (ALTAIR 2XP only)
• 1 device can monitor 2 gases (ALTAIR 2XT only)

Increased safety awareness & real-time compliance

• Stand-alone bump test anytime, anywhere without specific calibration gas (ALTAIR 2XP only)
• Bump pass: green LED flash every 15s, large on-screen checkmark
• Bump fail or expiration: red LED flash every 15s, no checkmark
• End-of-sensor-life warning and alarm

Full-time traceability

• Records 75 alarm events
• 150+ hours of periodic data (ALTAIR 2X and 2XP)
• 100+ hours of periodic data (ALTAIR 2XT)
• Compatible with MSA GALAXY® GX2 Automated Test System and MSA Link Pro software

Rugged durability

• Tough over-molded rubber armor
• Survives multiple 25-ft drops onto concrete
• Agency-certified dust- and water-tight IP67 construction
• Intrinsically-safe design

10076692 Altair QuickCheck Automated Test Station - Manual Regulator, O2/CO/H2S/SO2/NO2 by MSA

When working with hazardous substances or in potentially dangerous settings, worksites and users need to feel that safety is a top priority. MSA s Altair gas detectors and MSA s Altair QuickCheck Stations provide that sense of security as MSA products prioritize safety and reliability above all else. The QuickCheck Station is specially adapted for unique working conditions with its compatibility with other Altair products, easy to read test indicators, internal test record retention, and lightweight portability.

Features

The Altair QuickCheck Station tests Altair products for gas detection effectiveness and alarm functioning. The QuickCheck Station is compatible with the Altair and Altair Pro Single-Gas Detectors. The unit s easy to read displays and test indicator settings reduce the risk of mistaken test results. As Altair gas detection devices develop to meet industry needs, Altair s QuickCheck Station versions will be available with the ability to test the upcoming exotic gas variations.

The Altair QuickCheck Station has a variety of key features. The unit is designed to test Altair gas detectors sequentially for visual alarm activation, vibrating alarm activation, audible alarm activation and verification, and sensor gas response. The QuickCheck Station will indicate an easy to read pass or fail of the unit being tested. Users need only to set the gas detection instrument into the test station and manually press the TEST button. The test station records the date, time, and test results internally. The testing station can store up to 25 individual tests and results, and the Altair Pro Detector can store up to 50 individual tests and results.

Easy to read

The testing device also notifies users of the testing progress with a variety of easy to understand visual LED indicators. When the device is in the process of testing the gas detector, the device will flash an amber light. A solid red light indicates that the gas detector failed the test, and a green light indicates the detector passed the test. If a device is left mounted to the QuickCheck Station, the station will display a checkmark for 24 hours following a passed test.

Portability

The QuickCheck Station is lightweight at approximately 8.6 ounces (or 245 grams) and easily portable at approximately 2 inches in height, 4 ¾ inches in width, and 6 inches long. Typical testing time for the Altair QuickCheck Station is under 30 seconds and can be purchased in both automatic and manual versions. The unit is rated to operate in temperature conditions between 32 and 104 degrees Fahrenheit. The device also operates on 115/230 VAC or 50/60 Hz, and a car accessory power supply is available for additional power supply needs. Users may find a variety of replacement and accessory parts available in North America and internationally.

While Altair QuickCheck Station is the standard for excellence in safety, its cost-efficient production ensures that the unit is affordable and available. With the unit s quick test time of less than 30 seconds, compatibility with other Altair gas detection devices, and easy to read test LED test indicators, Altair QuickCheck Station is an industry leader in safety and reliability.

467895 Model RP Fixed Flow Regulator, 0.25LPM by MSA

Two regulators in one. Designed for use with all Model RP and Econo-Cal Calibration Cylinders. Supplied with calibration tubing and special fitting.

Principles of Operation

Applications

• Agriculture
• Chemical
• Construction
• Electric Utility
• Fire Fighting
• Hazardous Materials
• Mining
• Nuclear
• Oil and Gas
• Paper Pulp

Hazards

• Combustible Atmosphere
• Confined Space
• Fire
• Oxygen Deficiency
• Toxic Atmosphere IDLH
• Toxic Atmosphere Non-IDLH