$200 - $300, Test and Measurement, Jenco

3840 VisionPlus 4-Wire Portable Conductivity/TDS/Temperature Meter by Jenco

VisionPlus EC3840 is an easy to use, IP67 rated portable conductivity meter with TDS, salinity and temperature readouts. Key features include a water-proof / dust-proof body, 4-wire conductivity cell, selectable cell constant and adjustable TDS coefficient.

• Simultaneous display of conductivity, salinity or TDS with temp. measurements
• Selectable cell constants for true wide range readings
• Adjustable TDS coefficient, reference temp., temp. coefficient for most flexible and accurate TDS readings
• Automatically finds the most suitable display range for your measurements
• Accepts 4-wire conductivity cell
• Uses one conductivity cell for conductivity, salinity and TDS measurements
• IP67 rated body for water-proof (up to 1 meter) and dust-proof operation
• Removable shock-resistant rubber boot

392 Conductivity Transmitter, K=1, uS/mS Lo Multi-Range by Jenco

Conductivity Transmitter, panel mount, 1/8 DIN aluminum package, K=1.0 cell constant, isolated 4-20 mA analog transmitter current output, ATC is 10K thermistor for 5 to 55°C. Connections are to terminal blocks via spade lug connectors. 115/230V AC powered.

• Selectable wide measurement range
• Isolated 4-20ma output
• Automatic temperature compensation
• Selectable us/cm or ms/cm
• Adjustable zero
• High 50/60 hz noise rejection
• 1/8 DIN package

5005KA pH Meter Kit by Jenco

pH/mV/Temp. handheld meter with build in tabletop stand with LCD digital display. Meter has both ATC and manual temperature compensation. pH standardization calibration is via knobs and pH slope calibration is via potentiometer. Features include a voltage recorder output, reference input pin and BNC input connector. AC/DC Powered.

Includes:

• 5005 pH/mV/Temp. handheld meter
• 600P pH electrode
• 5005F carrying case with pH 4 & 7 capsules

• All solid state design
• Fast input response
• Low drift and high stability
• Tilt stand
• Greater than 100db 50/60hz rejection
• Battery low indicator
• Extra long battery life
• Auto polarity mv measurement
• Analog recorder output
• Rugged carrying case
• UL approved ac line adaptor
• Aconventional 9v battery
• Manual and ATC for pH measurement
• 0 to 100.0 °C range of temperature measurement
• 0.5 high liquid crystal display readable under bright ambient conditions

6010MKB Handheld pH/ORP Meter Kit by Jenco

Includes:

• 6010M Handheld pH/ORP Meter
• 6000P 3-in-1 pH/ ATC Probe, 4-pin connector, Temp. 60º C
• 6003C Extension Cable, 4-Pin to BNC & 1-Pin ATC, 3-ft
• 6010F carrying case

• Simultaneous displays pH or mV and temperature.
• 50 data set reviewable memory (6010M only).
• Convenient calibration with automatic buffer recognition of US and European buffer sets. Calibration data is stored in memory and ready for use on power up.
• Automatic or manual temperature compensation.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof
• Low battery indicator.
• RoHS and CE compliant.

6010MKC Handheld pH/ORP Meter Kit by Jenco

Includes:

• 6010M Handheld pH/ORP Meter
• 6000A Glass, 10K Thermistor with Jenco Screw Connector
• 600P pH electrode, 3-ft cable, BNC connector, max temperature 60° C
• 6010F carrying case

• Simultaneous displays pH or mV and temperature.
• 50 data set reviewable memory (6010M only).
• Convenient calibration with automatic buffer recognition of US and European buffer sets. Calibration data is stored in memory and ready for use on power up.
• Automatic or manual temperature compensation.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof
• Low battery indicator.
• RoHS and CE compliant.

6010NK Handheld pH/ORP Meter Kit by Jenco

Includes:

• 6010N Handheld pH/ORP Meter
• 600P pH electrode, 3-ft cable, BNC connector, max temperature 60° C
• 6003C Extension Cable, 4-Pin to BNC & 1-Pin ATC, 3-ft

• Simultaneous displays pH or mV and temperature.
• 50 data set reviewable memory (6010M only).
• Convenient calibration with automatic buffer recognition of US and European buffer sets. Calibration data is stored in memory and ready for use on power up.
• Automatic or manual temperature compensation.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof
• Low battery indicator.
• RoHS and CE compliant.

6010NKB Handheld pH/ORP Meter Kit by Jenco

Includes:

• 6010N Handheld pH/ORP Meter
• 600P pH electrode, 3-ft cable, BNC connector, max temperature 60° C
• 6003C Extension Cable, 4-Pin to BNC & 1-Pin ATC, 3-ft
• 6010F carrying case

• Simultaneous displays pH or mV and temperature.
• 50 data set reviewable memory (6010M only).
• Convenient calibration with automatic buffer recognition of US and European buffer sets. Calibration data is stored in memory and ready for use on power up.
• Automatic or manual temperature compensation.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof
• Low battery indicator.
• RoHS and CE compliant.

6010NKC Handheld pH/ORP Meter Kit by Jenco

Includes:

• 6010N Handheld pH/ORP Meter
• 6000A Glass, 10K Thermistor with Jenco Screw Connector
• 600P pH electrode, 3-ft cable, BNC connector, max temperature 60° C
• 6010F carrying case

• Simultaneous displays pH or mV and temperature.
• 50 data set reviewable memory (6010M only).
• Convenient calibration with automatic buffer recognition of US and European buffer sets. Calibration data is stored in memory and ready for use on power up.
• Automatic or manual temperature compensation.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof
• Low battery indicator.
• RoHS and CE compliant.

601AKA pH Meter Kit by Jenco

pH/mV handheld meter with manual temperature compensation and pH calibration via knobs and pH slope calibration potentiometer. Has LCD digital display, BNC connector, voltage recorder output and reference electrode pin. AC/DC Powered.

Includes:

• 601A pH/mV Handheld Meter
• 600P pH electrode
• 601AF carrying case

• Liquid crystal display readable under bright ambient conditions
• Three position rocker switch for pH off mv operations
• Recorder output
• All solid state design
• High stability
• Low drift
• Fast response
• Rugged carrying case
• UL approved ac line adaptor
• One conventional 9v battery
• Extra long battery life
• Battery low indicator

601AKB pH Meter Kit by Jenco

pH/mV handheld meter with manual temperature compensation and pH calibration via knobs and pH slope calibration potentiometer. Has LCD digital display, BNC connector, voltage recorder output and reference electrode pin. AC/DC Powered.

Includes:

• 601A pH/mV Handheld Meter
• 600P pH electrode
• 601AF carrying case
• 600D115 AC adapter

• Liquid crystal display readable under bright ambient conditions
• Three position rocker switch for pH off mv operations
• Recorder output
• All solid state design
• High stability
• Low drift
• Fast response
• Rugged carrying case
• UL approved ac line adaptor
• One conventional 9v battery
• Extra long battery life
• Battery low indicator

603A Benchtop Analog pH Meter, Karl Fisher, AC Adapter by Jenco

The model 603A is a high performance, low cost, general purpose laboratory instrument for the measure of pH and mV.

The model 603A uses a 5 2/1 inch analog meter with a mirror scale to increase readability to 0.02 pH and 2 mV.

Recorder output is provided for Karl Fischer and other polarized electrode titration applications.

608 Handheld Meter with Red LED Display by Jenco

• Three position rocker switch for on/off/momentary operation
• All solid design
• Low input response
• Manual temp. compensation for pH measurement
• 6conventional aa batteries
• Low drift and high stability
• Bright red led display
• UL approved ac line adaptor
• Low cost
• Rugged carrying case
• Analog recorder output

608AK Handheld Meter with Red LED Display Kit by Jenco

Includes:

• 608 Handheld Meter with Red LED Display
• 600P pH/ref eledtrode
• 608F carrying case with buffers and bottles

• Three position rocker switch for on/off/momentary operation
• All solid design
• Low input response
• Manual temp. compensation for pH measurement
• 6conventional aa batteries
• Low drift and high stability
• Bright red led display
• UL approved ac line adaptor
• Low cost
• Rugged carrying case
• Analog recorder output

609K pH Meter Kit by Jenco

pH handheld meter with LCD digital display and manual temperature compensation. pH calibration is via knobs and pH slope calibration potentiometer. Meter has voltage recorder output and BNC connector. AC/DC Powered.

Includes:

• 609 pH Handheld Meter
• 600P pH electrode
• 609F carrying case

• Three position rocker switch for on/off/momentary operation
• All solid design
• Low input response
• Large energy efficient led display
• Manual temp. compensation for pH measurement
• 6conventional aabatteries
• Low drift and high stability
• UL approved ac line adaptor
• Low cost
• Rugged carrying case
• Analog recorder output

612K Portable Digital pH Stick Meter with Replaceable pH Electrode Kit by Jenco

Portable Digital pH Stick Meter with replaceable pH electrode. Features dual point calibration and has manual temperature compensation. 9 Volt Battery.

Includes:

• 612 Portable Digital pH Stick Meter with Replaceable pH Electrode
• 612E pH/Reference Stick Electrode
• 612F carrying case

• All solid state design
• Low power consumption
• 0.31 high LCD display readable under bright ambient conditions
• Display hold function
• Slope adjust
• Low drift and high stability
• Manual temp. compensation
• Fast input response
• A9 voltage battery
• Battery low indicator
• Easy to use
• Low cost

6230M pH/mV/Temp. Microprocessor Handheld Meter by Jenco

pH/mV/Temp. microprocessor handheld meter in splash proof case with 3 point calibration, 40 memory storage, RS-232-C IBM compatible communication interface and BNC, pH/ORP connector with 8-pin DIN ATC connector. AC/DC power. CE Approved.

• 3 point calibration
• 40 memory storage
• Power down memories
• Electrode offset recognition
• Electrode slope recognition
• Built in buffer temp. coefficients
• ATC
• RS-232c output
• CE approved
• Splash resistant/watertight case
• Battery/ac adaptor
• High 50/60hz noise rejection
• UL approved ac line adaptor
• Aconventional 9v battery
• Highly reliable mechanical touch keys with audio feedback

6231M pH/mV/Temp Microprocessor Handheld Meter with 3-Point Calibration by Jenco

pH/mV/Temp. microprocessor handheld meter in splash proof case with 3 point calibration, 40 memory storage, BNC, pH/ORP connector with 8-pin DIN ATC connector. AC/DC power. CE Approved

• 3 point calibration
• 40 memory storage
• Power down memories
• Electrode offset recognition
• Electrode slope recognition
• Built in buffer temp. coefficients
• ATC
• CE approved
• Splash resistant/watertight case
• Battery/ac adaptor
• High 50/60hz noise rejection
• UL approved ac line adaptor
• Aconventional 9v battery
• Highly reliable mechanical touch keys with audio feedback

6231MKA pH/mV/Temp Microprocessor Handheld Meter with 3-Point Calibration Kit by Jenco

pH/mV/Temp. microprocessor handheld meter in splash proof case with 3 point calibration, 40 memory storage, BNC, pH/ORP connector with 8-pin DIN ATC connector. AC/DC power. CE Approved

Includes:

• 6231M: Meter with memory
• Choice of 6230A: Glass Temperature Probe. 3-ft Or 6230AST: Stainless Steel Temperature Probe, 3-ft

• 3 point calibration
• 40 memory storage
• Power down memories
• Electrode offset recognition
• Electrode slope recognition
• Built in buffer temp. coefficients
• ATC
• CE approved
• Splash resistant/watertight case
• Battery/ac adaptor
• High 50/60hz noise rejection
• UL approved ac line adaptor
• Aconventional 9v battery
• Highly reliable mechanical touch keys with audio feedback

6231NKA pH/mV/Temp. Microprocessor Handheld Meter Kit by Jenco

pH/mV/Temp. microprocessor handheld meter in splash proof case with 3 point calibration, BNC, pH/ORP connector with 8-pin DIN ATC connector. AC/DC power. CE Approved

Includes:

• 6231N pH/mV/Temp. Microprocessor Handheld Meter
• 6230A-ST Stainless Steel Temperature Probe

• 3 point calibration
• Power down memories
• Electrode offset recognition
• Electrode slope recognition
• Built in buffer temp. coefficients
• ATC
• CE approved
• Splash resistant/watertight case
• Battery/ac adaptor
• High 50/60hz noise rejection
• UL approved ac line adaptor
• A conventional 9v battery
• Highly reliable mechanical touch keys with audio feedback

6251 pH/mV/ION/Temp. Microprocessor Handheld Meter by Jenco

pH/mV/ION/Temp. microprocessor handheld meter in splash proof case, BNC pH/mV/ION connector and 8-pin DIN ATC connector. AC/DC power. CE Approved.

• CE approved
• Power down backup
• Splash resistant/watertight case
• Battery/ac adaptor
• High 50/60hz noise rejection
• High resolution ,4 1/2 digit readout
• Highly reliable mechanical touch keys with audio feedback
• Programmable resolution to 0.001/0.1 pH,1/0.1 mv
• Direct readout in ion concentration (calibration units conform to that of the calibration standard solutions)

62K ORP Handheld Meter with Offset Adjustment Kit by Jenco

ORP handheld meter with BNC and Zero Adjustment via manual potentiometers for calibration of meter and ORP electrode to calibration standard solutions. Housed in a rugged splash proof case with large LCD display. AC/DC Powered.

Includes:

• 62 ORP Handheld Meter with Offset Adjustment
• 600E-ORP Probe
• 600D115 AC Adapter
• 6007F Carrying case

• Zero adjust for ORP
• LCD display
• Long 1400 hrs battery life
• High stability
• Rugged case

691N 1/8 DIN Panel Mount pH Transmitter with Calibration by Jenco

1/8 DIN panel mount pH transmitter with calibration by potentiometers. Has a manual temperature control knob and normal transmitter output of 4-20 mA output for 0-14 pH range or in expanded mode 4-2mA can be for any 2 pH units from 0 to 14 pH. Features a large bright red LED display. Connectors are a BNC pH input and spade lug screw type connector block. 115/230V AC.

• Current output with selectable span for better accuracy
• Manual temp. compensation
• 0.56 high efficiency red led display
• Low power consumption
• Reduced internal heating for increased reliability
• Heat cycled 100 hrs
• Isolated 4-20 mA output span of 0 to 14 pH over any 2 pH