pH Meters, Jenco, Jenco

692 1/8 DIN Panel Mount pH Transmitter with 4-20 mA Output by Jenco

1/8 DIN panel mount pH transmitter with 4-20 mA output and calibration by potentiometers. ATC temperature control uses a Pt-100 or simulation resistor. Features a large LCD display and uses a BNC input and spade lug screw type connector block.

• All solid state design
• ATC
• Low power consumption design, reduced internal heating thus increased reliability
• 0.56 high LCD display
• Isolated 4 to 20 mA current output
• High stability and fast response
• 1/8 DIN standard aluminum case
• Easy to install
• Heat cycled 100 hours before shipment

3631 Industrial pH/ORP Controller, LCD Display, 1/8 Din Panel Mount by Jenco

• Easy to install 1/8 DIN plastic casing.
• Clear LCD displays pH, mV or temperature with backlight.
• Universal power supply input from 100-240VAC.
• Automatic buffer recognition of US and NIST buffer sets. Calibrated data is stored in memory and ready to for use on power up.
• Automatic or manual temperature compensation.
• Displays absolute and relative ORP.
• Two sets of programmable on/off relays for pH or ORP (3621).
• Isolated and reversible 4-20mA current output for pH or ORP allows it to be used as a proportional output (3631).
• RoHs compliant.

6313 Single Parameter pH or ORP Controller, 2-Relays, IP-65 Case, RS-485 by Jenco

• Clear LCD displays pH or mV, with temperature and relay status simultaneously.
• Automatic buffer recognition of US and NIST buffer sets. Calibration data is stored in memory and is ready for use on power up.
• Displays absolute and relative ORP.
• Isolated and reversible 4-20 mA current output for pH or ORP allows it to be used as a proportional output.
• 2 programmable on/off relays: 2 for pH or ORP.
• CE Approved
• Password protection.
• IP65

pH6175 Benchtop pH, mV, ORP, Ion Temperature Meter by Jenco

Jenco 6175 benchtop pH meter is the successor of the popular 6173 benchtop pH meter. While the large LCD display and easy of use remains firmly in place, model 6175 now offers 0.1 mV resolution for ISE applications and a streamlined look.

This pH benchtop is RoHS compliant.

• Large LCD display
• High 0.1 mV resolution
• Automatic buffers recognition of US and NIST buffer sets
• Displays electrode efficiency with electrode offset recognition and electrode slope recognition
• Built in buffer temp. coefficient
• Stores calibration data in memory so meter is available for use on power up
• Automatic / manual temperature compensation
• Automatic lock mode and end point sensing lock stable readings
• AC adapter or battery powered (with low battery indicator)
• RoHS compliant

6010MKA Handheld pH/ORP Meter Kit by Jenco

Includes:

• 6010M Handheld pH/ORP Meter
• 6000P 3-in-1 pH/ ATC Probe, 4-pin connector, Temp. 60º C
• 6003C Extension Cable, 4-Pin to BNC & 1-Pin ATC, 3-ft

• Simultaneous displays pH or mV and temperature.
• 50 data set reviewable memory (6010M only).
• Convenient calibration with automatic buffer recognition of US and European buffer sets. Calibration data is stored in memory and ready for use on power up.
• Automatic or manual temperature compensation.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof
• Low battery indicator.
• RoHS and CE compliant.

pH6175KAA Benchtop pH, mV, ORP, Ion Temperature Meter Kit by Jenco

Jenco 6175 benchtop pH meter is the successor of the popular 6173 benchtop pH meter. While the large LCD display and easy of use remains firmly in place, model 6175 now offers 0.1 mV resolution for ISE applications and a streamlined look.

This pH benchtop is RoHS compliant.

Includes:

• pH6175: Meter
• 600P: pH/Ref Electrode, 3-ft, BNC
• Choice of 6230A: Glass Temperature Probe. 3-ft Or 6230AST: Stainless Steel Temperature Probe, 3-ft
• Choice of 6230D115: 120V AC adapter Or 6230D230: 220V AC adapter
• 007N: Electrode's holder, swing arm

• Large LCD display
• High 0.1 mV resolution
• Automatic buffers recognition of US and NIST buffer sets
• Displays electrode efficiency with electrode offset recognition and electrode slope recognition
• Built in buffer temp. coefficient
• Stores calibration data in memory so meter is available for use on power up
• Automatic / manual temperature compensation
• Automatic lock mode and end point sensing lock stable readings
• AC adapter or battery powered (with low battery indicator)
• RoHS compliant

6231N pH/mV/Temp. Microprocessor Handheld Meter by Jenco

pH/mV/Temp. microprocessor handheld meter in splash proof case with 3 point calibration, BNC, pH/ORP connector with 8-pin DIN ATC connector. AC/DC power. CE Approved

• 3 point calibration
• Power down memories
• Electrode offset recognition
• Electrode slope recognition
• Built in buffer temp. coefficients
• ATC
• CE approved
• Splash resistant/watertight case
• Battery/ac adaptor
• High 50/60hz noise rejection
• UL approved ac line adaptor
• A conventional 9v battery
• Highly reliable mechanical touch keys with audio feedback

6173KBA Benchtop pH/mV/Temperature Meter Kit by Jenco

pH/mV/Temp benchtop meter with an extra large LCD display for ease of use. Features a splash proof and rugged case ideal for schools and universities. Features EEF, Electrode Efficiency Function, multiple buffers 4.00, 4.01, 6.86, 7.00, 9.18 & 10.0 and automatic slope, buffer and electrode offset recognition. Has power down memory backup and works on 6 AA batteries or 115/230 V AC adapters. CE Approved & ISO 9001 Certified.

Includes:

• 6173 Benchtop pH/mV/Temperature Meter
• 6000P pH/Ref./Temp. Probe
• 6005C Cable
• 6230D115 AC Adapter
• Electrode Holder Arm

• Larger LCD display
• Buffers recognition
• Electrode offset recognition
• Electrode slope recognition
• Built in buffer temp. coefficient
• Auto lock
• Touch keys with audio feedback
• Power down memory
• Battery/ac adaptor
• Low power consumption
• Battery low indicator
• Percentage of power supply display

6311 Single Parameter pH or ORP Analyzer by Jenco

pH & ORP analyzer,1/4 DIN panel mount IP-65 case. Features 4 fully programmable relays for pH or ORP and one for wash. RS-485 interface, password protected with individual ID's. 4-20 mA analog output is fully programmable, assignable & reversible. Tinned lead connectors. CE Approved.

• Ph/ORP/temp. measurement & control
• Display pH electrode efficiency
• User selectable ATC element: 3k balco, 10k, and pt-1000
• Reversible & isolated 4~20ma output
• RS-485 output
• Bumpless calibration
• Graphic LCD dispaly,128 x 64with backlight
• Membrane switch with audio feedback
• Auto temp. compensation
• High 50/60 hz noise rejection
• Pipe/wall/panel mounting
• 1/4 DIN watertight enclosure
• One programmable relay for temp.
• CE approved
• Programmable linear/ ORP current output or programmable linear/ anti-logarithmic current output

3671N 1/8 DIN Panel Mount pH/ORP Controller by Jenco

1/8 DIN panel mount pH/ORP controller with dual SPDT Hi/Lo relays, manual set points and calibration are via potentiometers. Features a voltage/recorder output and an internal pH/ORP select switch. Display is a large bright red LED. Connectors are a BNC input and spade lug screw type connector block. Meter requires a Pt-100 ATC or a simulation resistor for temperature. Power115/230A AC.

• All solid state design
• Low cost
• Easy to install
• Set points on front panel
• Recorder output
• 0.56 high efficiency red led display
• 1/8 DIN aluminum case
• Set points cover entire span
• ATC for pH 0 to 100 °C
• Internal pH/ORP select switch
• Low power consumption design, reduced internal heating thus increased reliability

5001 pH Handheld Meter by Jenco

pH handheld meter with build in tabletop stand and LCD digital display. Manual temperature compensation and pH standardization calibration is via knobs and pH slope calibration is via potentiometer. Input connector is BNC type. AC/DC Powered.

• All solid state design
• Low drift and high stability
• Tilt stand
• Rugged carrying case
• Low cost
• Manual temperature compensation for pH measurement
• Battery low indicator
• UL approved ac line adaptor
• 9v battery

5005 pH/mV/Temp. Handheld Meter by Jenco

pH/mV/Temp. handheld meter with build in tabletop stand with LCD digital display. Meter has both ATC and manual temperature compensation. pH standardization calibration is via knobs and pH slope calibration is via potentiometer. Features include a voltage recorder output, reference input pin and BNC input connector. AC/DC Powered.

• All solid state design
• Fast input response
• Low drift and high stability
• Tilt stand
• Greater than 100db 50/60hz rejection
• Battery low indicator
• Extra long battery life
• Auto polarity mv measurement
• Analog recorder output
• Rugged carrying case
• UL approved ac line adaptor
• Aconventional 9v battery
• Manual and ATC for pH measurement
• 0 to 100.0 °C range of temperature measurement
• 0.5 high liquid crystal display readable under bright ambient conditions

5005KA pH Meter Kit by Jenco

pH/mV/Temp. handheld meter with build in tabletop stand with LCD digital display. Meter has both ATC and manual temperature compensation. pH standardization calibration is via knobs and pH slope calibration is via potentiometer. Features include a voltage recorder output, reference input pin and BNC input connector. AC/DC Powered.

Includes:

• 5005 pH/mV/Temp. handheld meter
• 600P pH electrode
• 5005F carrying case with pH 4 & 7 capsules

• All solid state design
• Fast input response
• Low drift and high stability
• Tilt stand
• Greater than 100db 50/60hz rejection
• Battery low indicator
• Extra long battery life
• Auto polarity mv measurement
• Analog recorder output
• Rugged carrying case
• UL approved ac line adaptor
• Aconventional 9v battery
• Manual and ATC for pH measurement
• 0 to 100.0 °C range of temperature measurement
• 0.5 high liquid crystal display readable under bright ambient conditions

5005KC pH Meter Kit by Jenco

pH/mV/Temp. handheld meter with build in tabletop stand with LCD digital display. Meter has both ATC and manual temperature compensation. pH standardization calibration is via knobs and pH slope calibration is via potentiometer. Features include a voltage recorder output, reference input pin and BNC input connector. AC/DC Powered.

Includes:

• 5005 pH/mV/Temp. handheld meter
• 600A Temp. probe
• 600P pH electrode
• 600D115 AC adapter
• 5005F carrying case with pH 4 & 7 capsules

• All solid state design
• Fast input response
• Low drift and high stability
• Tilt stand
• Greater than 100db 50/60hz rejection
• Battery low indicator
• Extra long battery life
• Auto polarity mv measurement
• Analog recorder output
• Rugged carrying case
• UL approved ac line adaptor
• Aconventional 9v battery
• Manual and ATC for pH measurement
• 0 to 100.0 °C range of temperature measurement
• 0.5 high liquid crystal display readable under bright ambient conditions

60 pH Handheld Meter by Jenco

pH handheld meter with BNC, LCD display and manual temperature compensation with two point calibration via potentiometers for ease of use. Case is rugged and splash resistant. AC/DC Powered.

• All solid state design
• High accuracy
• LCD display
• Extra long battery life
• Battery low indicator
• Low cost
• Rugged carrying case
• Power: one 9V DC battery or 115/230v ac adapter

6010MK Handheld pH/ORP Meter Kit by Jenco

Includes:

• 6010M Handheld pH/ORP Meter
• 600P pH electrode

• Simultaneous displays pH or mV and temperature.
• 50 data set reviewable memory (6010M only).
• Convenient calibration with automatic buffer recognition of US and European buffer sets. Calibration data is stored in memory and ready for use on power up.
• Automatic or manual temperature compensation.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof
• Low battery indicator.
• RoHS and CE compliant.