Conductivity TDS & Salinity Meters, Jenco

6377MKA Benchtop pH/Conductivity/Temperature Meter Kit with Memory by Jenco

The Basis Series pH/mV/Conductivity/Salinity/TDS/temperature benchtop meter is the Multi-parameter meter from a line that is renowned for its reading quality, now with a refined user experience and improved usability.

• Renowned accuracy and repeatability
• Upgraded user experience and usability
• Improved electrode serviceability and low cost of ownership

Well-designed, Inside and Out

The Basis Series pH/EC Multi-parameter meter forms the foundation of Jenco's benchtop meter offerings and comes from a long line of distinguished benchtop meters, where low cost of ownership, reading quality and build quality take precedent.

Renowned Accuracy and Repeatability

The reason Jenco is consistently contracted to build products for well-respected brands and the reason we can consistently win the trust of end-users is due to our reputation for being focused on reading quality. Do the right things in the right way, no cutting corners.

• Repeatable readings with 0.01 pH and 0.1 mV resolution
• Repeatable, accurate results achieved with up to 5 points NIST or US buffer calibration for pH, 1 point ORP and 1 point Conductivity offset calibration.
• Non-volatile memory holds up to 750 data points.
• Each and every unit is hand calibrated and QC ed by at least 2 teams

Upgraded User Experience and Usability

Streamlined and modern design is paired with a large, high contrast backlit LCD, buttons with tactile and audio feedback, and a detached electrode holder arm.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Well-situated keys with tactile feedback
• AC adaptor or battery powered
• Splash-resistant case made with durable, reinforced plastic for added protection

Improved Electrode Serviceability and Low Cost of Ownership

The Basis Series pH/mV/Conductivity/Salinity/TDS/temperature benchtop meter uses a standard BNC connector for pH and ORP so it works with a vast majority of electrodes available on the market. The decision to make the electrode arm a detached, optional accessory further allows the Basis Series to be setup in the way that works best for you.

• BNC connector for pH or ORP electrodes
• 8-Pin DIN for temperature and conductivity probe

Kit Includes:

• 6377M - Benchtop pH/Conductivity/Temperature Meter with Memory
• 109L - Glass/Platinum, W/ 8-Pin Connector, K=1.0
• 600P - pH Electrode, 3-ft Cable, BNC Connector, Max Temp. 60 Deg. C
• 6230D115 - AC Adapter, 9 VDC, Center Negative
• 007A - Electrode Holder, Spring Balanced, Alumimum Swing Arm

6377MKB Benchtop pH/Conductivity/Temperature Meter Kit with Memory by Jenco

The Basis Series pH/mV/Conductivity/Salinity/TDS/temperature benchtop meter is the Multi-parameter meter from a line that is renowned for its reading quality, now with a refined user experience and improved usability.

• Renowned accuracy and repeatability
• Upgraded user experience and usability
• Improved electrode serviceability and low cost of ownership

Well-designed, Inside and Out

The Basis Series pH/EC Multi-parameter meter forms the foundation of Jenco's benchtop meter offerings and comes from a long line of distinguished benchtop meters, where low cost of ownership, reading quality and build quality take precedent.

Renowned Accuracy and Repeatability

The reason Jenco is consistently contracted to build products for well-respected brands and the reason we can consistently win the trust of end-users is due to our reputation for being focused on reading quality. Do the right things in the right way, no cutting corners.

• Repeatable readings with 0.01 pH and 0.1 mV resolution
• Repeatable, accurate results achieved with up to 5 points NIST or US buffer calibration for pH, 1 point ORP and 1 point Conductivity offset calibration.
• Non-volatile memory holds up to 750 data points.
• Each and every unit is hand calibrated and QC ed by at least 2 teams

Upgraded User Experience and Usability

Streamlined and modern design is paired with a large, high contrast backlit LCD, buttons with tactile and audio feedback, and a detached electrode holder arm.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Well-situated keys with tactile feedback
• AC adaptor or battery powered
• Splash-resistant case made with durable, reinforced plastic for added protection

Improved Electrode Serviceability and Low Cost of Ownership

The Basis Series pH/mV/Conductivity/Salinity/TDS/temperature benchtop meter uses a standard BNC connector for pH and ORP so it works with a vast majority of electrodes available on the market. The decision to make the electrode arm a detached, optional accessory further allows the Basis Series to be setup in the way that works best for you.

• BNC connector for pH or ORP electrodes
• 8-Pin DIN for temperature and conductivity probe

Kit Includes:

• 6377M - Benchtop pH/Conductivity/Temperature Meter with Memory
• 101C - Epoxy/Platinum, W/ 8-Pin Connector, K=0.475
• 600P - pH Electrode, 3-ft Cable, BNC Connector, Max Temp. 60 Deg. C
• 6230D115 - AC Adapter, 9 VDC, Center Negative

6377MKBA Benchtop pH/Conductivity/Temperature Meter Kit with Memory by Jenco

The Basis Series pH/mV/Conductivity/Salinity/TDS/temperature benchtop meter is the Multi-parameter meter from a line that is renowned for its reading quality, now with a refined user experience and improved usability.

• Renowned accuracy and repeatability
• Upgraded user experience and usability
• Improved electrode serviceability and low cost of ownership

Well-designed, Inside and Out

The Basis Series pH/EC Multi-parameter meter forms the foundation of Jenco's benchtop meter offerings and comes from a long line of distinguished benchtop meters, where low cost of ownership, reading quality and build quality take precedent.

Renowned Accuracy and Repeatability

The reason Jenco is consistently contracted to build products for well-respected brands and the reason we can consistently win the trust of end-users is due to our reputation for being focused on reading quality. Do the right things in the right way, no cutting corners.

• Repeatable readings with 0.01 pH and 0.1 mV resolution
• Repeatable, accurate results achieved with up to 5 points NIST or US buffer calibration for pH, 1 point ORP and 1 point Conductivity offset calibration.
• Non-volatile memory holds up to 750 data points.
• Each and every unit is hand calibrated and QC ed by at least 2 teams

Upgraded User Experience and Usability

Streamlined and modern design is paired with a large, high contrast backlit LCD, buttons with tactile and audio feedback, and a detached electrode holder arm.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Well-situated keys with tactile feedback
• AC adaptor or battery powered
• Splash-resistant case made with durable, reinforced plastic for added protection

Improved Electrode Serviceability and Low Cost of Ownership

The Basis Series pH/mV/Conductivity/Salinity/TDS/temperature benchtop meter uses a standard BNC connector for pH and ORP so it works with a vast majority of electrodes available on the market. The decision to make the electrode arm a detached, optional accessory further allows the Basis Series to be setup in the way that works best for you.

• BNC connector for pH or ORP electrodes
• 8-Pin DIN for temperature and conductivity probe

Kit Includes:

• 6377M - Benchtop pH/Conductivity/Temperature Meter with Memory
• 101C - Epoxy/Platinum, W/ 8-Pin Connector, K=0.475
• 600P - pH Electrode, 3-ft Cable, BNC Connector, Max Temp. 60 Deg. C
• 6230D115 - AC Adapter, 9 VDC, Center Negative
• 007A - Electrode Holder, Spring Balanced, Alumimum Swing Arm

COND110N Non-Bluetooth Conductivity + Temperature Tester (0 to 2000 uS/cm) by Jenco

Waterproof, economical conductivity/temperature tester with long useful life.

Like its Bluetooth sibling, the Wand Non-Bluetooth Series' main focus is to deliver accurate and repeatable conductivity results easily and affordability. This was accomplished by starting Jenco's longest running and very popular tester series and updating it with better electronics for better accuracy, replacing the potentiometer with buttons with tactile feedback and protecting the upgraded internals with an IP67 waterproof housing.

Improved Reading Quality

• 1 Point calibration
• ±1% F.S. accuracy

Simple Operation

• Clear, large LCD displays conductivity and temperature
• Button operations with tactile feedback
• IP67 waterproof housing

Available Configurations

Single parameter pH, ORP, conductivity and TDS models with temperature. Conductivity and TDS comes in three different models each for three different measurement ranges.

COND111N Non-Bluetooth Conductivity + Temperature Tester (0 to 20 mS/cm) by Jenco

Waterproof, economical conductivity/temperature tester with long useful life.

Like its Bluetooth sibling, the Wand Non-Bluetooth Series' main focus is to deliver accurate and repeatable conductivity results easily and affordability. This was accomplished by starting Jenco's longest running and very popular tester series and updating it with better electronics for better accuracy, replacing the potentiometer with buttons with tactile feedback and protecting the upgraded internals with an IP67 waterproof housing.

Improved Reading Quality

• 1 Point calibration
• ±1% F.S. accuracy

Simple Operation

• Clear, large LCD displays conductivity and temperature
• Button operations with tactile feedback
• IP67 waterproof housing

Available Configurations

Single parameter pH, ORP, conductivity and TDS models with temperature. Conductivity and TDS comes in three different models each for three different measurement ranges.

COND115N Non-Bluetooth Conductivity + Temperature Tester (0 to 100 uS/cm) by Jenco

Waterproof, economical conductivity/temperature tester with long useful life.

Like its Bluetooth sibling, the Wand Non-Bluetooth Series' main focus is to deliver accurate and repeatable conductivity results easily and affordability. This was accomplished by starting Jenco's longest running and very popular tester series and updating it with better electronics for better accuracy, replacing the potentiometer with buttons with tactile feedback and protecting the upgraded internals with an IP67 waterproof housing.

Improved Reading Quality

• 1 Point calibration
• ±1% F.S. accuracy

Simple Operation

• Clear, large LCD displays conductivity and temperature
• Button operations with tactile feedback
• IP67 waterproof housing

Available Configurations

Single parameter pH, ORP, conductivity and TDS models with temperature. Conductivity and TDS comes in three different models each for three different measurement ranges.

EC111B Bluetooth Conductivity/Salinity/TDS + Temperature Tester (0.00 to 20.00 mS/cm) by Jenco

A Bluetooth conductivity/temperature tester designed with the everyday user in mind. This tester pairs with Jenco's free conductivity Bluetooth iOS or Android app to provide the simplest way to accurately measure conductivity and temperature readings.

• Measures Conductivity, TDS, salinity and temperature
• Simple guided calibration (easy one point calibration)
• Displays last calibration date
• Displays calibration history (pro app)
• Automatic temperature compensation
• Customized measurement settings
• Reading quality indicator
• Saves readings with time-date stamp and GPS mapping (pro app)
• Data sharing (pro app)
• IP67
• RoHS complaint
• Two AAA batteries to ensure long battery life
• Low battery indicator
• Auto shutoff

EC115B Bluetooth Conductivity/Salinity/TDS + Temperature Tester (0.0 to 100.0 uS/cm) by Jenco

A Bluetooth conductivity/temperature tester designed with the everyday user in mind. This tester pairs with Jenco's free conductivity Bluetooth iOS or Android app to provide the simplest way to accurately measure conductivity and temperature readings.

• Measures Conductivity, TDS, salinity and temperature
• Simple guided calibration (easy one point calibration)
• Displays last calibration date
• Displays calibration history (pro app)
• Automatic temperature compensation
• Customized measurement settings
• Reading quality indicator
• Saves readings with time-date stamp and GPS mapping (pro app)
• Data sharing (pro app)
• IP67
• RoHS complaint
• Two AAA batteries to ensure long battery life
• Low battery indicator
• Auto shutoff

EC330 VisionPlus Conductivity Meter by Jenco

Jenco EC330 is an easy to use, IP67 rated conductivity tester with TDS and temperature readout. Key features include dual display of conductivity or TDS with temperature, selectable or auto ranging, replaceable conductivity cell and IP67 rated body.

This tester is RoHS compliant.

• Simultaneous display of conductivity and temperature, or TDS and temperature
• 1 or 2 point calibration
• Automatic temperature compensation
• Selectable or auto ranging of conductivity and TDS readings
• Replaceable conductivity cell
• 6 selectable units of measure (uS/cm, mS/cm, mg/L, g/L, °C, °F)
• Data hold

EC331 VisionPlus Resistivity/Conductivity Meter by Jenco

Jenco EC331 is an easy to use, IP67 rated conductivity tester with resistivity and temperature readout. Key features include dual display of conductivity or resistivity with temperature, selectable or auto ranging, replaceable conductivity cell and IP67 rated body.

This tester is RoHS compliant.

• Simultaneous display of conductivity and temperature, or resistivity and temperature
• Convenient 1 point calibration
• Automatic temperature compensation
• Selectable or auto ranging of conductivity and resistivity readings
• Replaceable stainless steel conductivity cell ensures extended usefulness
• 4 selectable units of measure (uS/cm, M?, °C, °F)
• Battery life of over 100 hours
• Data hold

pH/EC 80 pH/Conductivity/Temperature Meter by Jenco

Multi-parameter tester for measuring pH, conductivity, TDS, salinity and temperature

The pH/EC80 is one of the most advanced multi-parameter tester on the market. The tester has a large graphic LCD that simultaneously displays pH or EC measurement and temperature measurement. Users can store up to 50 memory data sets for recall and select degrees Celsius or Fahrenheit as the temperature unit of measure. In addition, the advanced hardware and the user-replaceable electrode module are protected by an IP-67 rated housing.

• Simultaneously measures pH, Conductivity, TDS, Salinity and temperature without switching probe
• Graphic LCD display
• Auto temperature compensation
• Switches between °C and °F
• Auto shut down feature
• Replaceable pH/Conductivity electrode module
• 50 sets of data memory
• IP67 waterproof
• Battery life >100hrs
• CE approved and RoHS compliant

TDS110B Bluetooth TDS + Temperature tester (0 to 4000 mg/L) by Jenco

A Bluetooth TDS/temperature tester designed with the everyday user in mind. This tester pairs with Jenco's free TDS Bluetooth iOS or Android app to provide the simplest way to accurately measure TDS and temperature readings.

• Measures TDS and temperature
• Simple guided calibration (easy one point calibration)
• Displays last calibration date
• Displays calibration history (pro app)
• Automatic temperature compensation
• Customized measurement settings
• Reading quality indicator
• Saves readings with time-date stamp and GPS mapping (pro app)
• Data sharing (pro app)
• IP67
• RoHS complaint
• Two AAA batteries to ensure long battery life
• Low battery indicator
• Auto shutoff

TDS110N Non-Bluetooth TDS + Temperature tester (0 to 2000 mg/L) by Jenco

Waterproof, economical TDS/temperature tester with long useful life.

Like its Bluetooth sibling, the Wand Non-Bluetooth Series' main focus is to deliver accurate and repeatable TDS results easily and affordability. This was accomplished by starting Jenco's longest running and very popular tester series and updating it with better electronics for better accuracy, replacing the potentiometer with buttons with tactile feedback and protecting the upgraded internals with an IP67 waterproof housing.

Improved Reading Quality

• 1 Point calibration
• ±1% F.S. accuracy

Simple Operation

• Clear, large LCD displays TDS and temperature
• Button operations with tactile feedback
• IP67 waterproof housing

TDS111N Non-Bluetooth TDS + Temperature tester (0 to 10.0 g/L) by Jenco

Waterproof, economical TDS/temperature tester with long useful life.

Like its Bluetooth sibling, the Wand Non-Bluetooth Series' main focus is to deliver accurate and repeatable TDS results easily and affordability. This was accomplished by starting Jenco's longest running and very popular tester series and updating it with better electronics for better accuracy, replacing the potentiometer with buttons with tactile feedback and protecting the upgraded internals with an IP67 waterproof housing.

Improved Reading Quality

• 1 Point calibration
• ±1% F.S. accuracy

Simple Operation

• Clear, large LCD displays TDS and temperature
• Button operations with tactile feedback
• IP67 waterproof housing

TDS115N Non-Bluetooth TDS + Temperature tester (0 to 50.00 mg/L) by Jenco

Waterproof, economical TDS/temperature tester with long useful life.

Like its Bluetooth sibling, the Wand Non-Bluetooth Series' main focus is to deliver accurate and repeatable TDS results easily and affordability. This was accomplished by starting Jenco's longest running and very popular tester series and updating it with better electronics for better accuracy, replacing the potentiometer with buttons with tactile feedback and protecting the upgraded internals with an IP67 waterproof housing.

Improved Reading Quality

• 1 Point calibration
• ±1% F.S. accuracy

Simple Operation

• Clear, large LCD displays TDS and temperature
• Button operations with tactile feedback
• IP67 waterproof housing