$200 - $300, Conductivity TDS & Salinity Meters, Jenco

3321 Conductivity/Resistivity Controller with 2-Relays by Jenco

• Easy to install 1/8 DIN plastic casing.
• Clear LCD displays conductivity, resistivity or temperature with backlight.
• Universal power supply input from 100-240VAC.
• Automatic or manual temperature compensation.
• Two sets of programmable on/off relays for conductivity or resistivity (3321).
• Isolated and reversible 4-20mA current output for conductivity or resistivity allows it to be used as a proportional output (3331).
• RoHS compliant.

3331 Conductivity/Resistivity Controller with 2-Relays by Jenco

• Easy to install 1/8 DIN plastic casing.
• Clear LCD displays conductivity, resistivity or temperature with backlight.
• Universal power supply input from 100-240VAC.
• Automatic or manual temperature compensation.
• Two sets of programmable on/off relays for conductivity or resistivity (3321).
• Isolated and reversible 4-20mA current output for conductivity or resistivity allows it to be used as a proportional output (3331).
• RoHS compliant.

3101S Conductivity Controller with Analog Output, Adjustable 0-99.9 mS to 0-99.9 uS by Jenco

Conductivity controller with analog output, panel mount, 1/8 DIN aluminum case, K=1.0 cell constant with front panel cell adjust potentiometer and front panel potentiometers for Hi/Lo set points for the Hi and Lo relays. Features bright red LED display and red uS/mS LED indicators. Analog Voltage output is 1 mV/LSD, +/- 0.5%, +/- 1 mV . Power 115/230V AC.

• Wide, selectable range via internal dip switch
• Dual relays
• 0.56 high efficiency red led display
• For cell constant k=1.0
• Analog voltage output
• Auto temp. compensation
• Heat cycled 100 hrs
• Front panel operation
• 50/60 hz noise rejection

3173 Large LCD Conductivity/TDS/Temperature Benchtop Meter by Jenco

Conductivity/TDS/Temperature benchtop meter, with an extra large LCD display, adjustable cell constants K=0.1, 1.0, 10.0, programmable temperature co-efficient and reference temperature. Battery or 115/230 AC powered. CE approved.

• Clear, large LCD display (4 1/8 x 3 1/16 in.).
• Displays conductivity and temperature, or tds and temperature readings at the same time.
• Accepts 2-wire conductivity cells with adjustable k=0.1, k=1 and k=10 cell constants for improved flexibility and accuracy.
• Auto or manual ranging of 3 conductivity ranges are available for improved usability.
• Convenient one point calibration. calibration data is stored in memory and is ready for use on power up.
• Readings are automatically compensated for temperature (ATC). meter automatically switches into manual
• compensation when temperature probe is not present.
• Automatic lock mode is available to lock in stable readings.
• Intuitive operation with membrane keypad with tactile and audio feedback.
• Splash resistant case is made with durable, reinforced plastic for added protection. protective covers for connectors are included.
• Large LCD is offset for improved protection against unintentional damage.
• Smaller case does not clutter valuable desk space.
• 8pin DIN connector for conductivity cell & 10k thermistor.
• AC adaptor or battery power.

3101 Conductivity Controller with Analog Output, Adjustable 0-199 mS to 0-99 uS by Jenco

Conductivity controller with analog output, panel mount, 1/8 DIN aluminum case, K=1.0 cell constant with front panel cell adjust potentiometer and front panel potentiometers for Hi/Lo set points for the Hi and Lo relays. Features bright red LED display and red uS/mS LED indicators. Analog Voltage output is 1 mV/LSD, +/- 0.5%, +/- 1 mV . Power 115/230V AC.

• Wide, selectable range via internal dip switch
• Dual relays
• 0.56 high efficiency red led display
• For cell constant k=1.0
• Analog voltage output
• Auto temp. compensation
• Heat cycled 100 hrs
• Front panel operation
• 50/60 hz noise rejection

3177 Benchtop, Conductivity/Temperature/TDS Meter by Jenco

The Basis Series Conductivity/TDS/Salinity benchtop is the latest entry-level meter from a line that is renowned for its reading quality, now with a refined user experience and improved usability.

• Renowned accuracy and repeatability
• Upgraded user experience and usability
• Low cost of ownership

Well-designed, Inside and Out

The Basis Series Conductivity/TDS/Salinity meter, along with the pH/mV model, forms the foundation of Jenco's benchtop meter offerings and comes from a long line of distinguished benchtop meters, where low cost of ownership, reading quality and build quality take precedent.

Benchtop Conductivity/TDS/Salinity Meter Renowned for Accuracy and Repeatability

The reason Jenco is consistently contracted to build products for well-respected brands and the reason we can consistently win the trust of end-users is due to our reputation for being focused on reading quality. Do the right things in the right way, no cutting corners.

• Repeatable readings with ±0.5% full scale accurate across entire measurement range
• Uses 2-wire conductivity cells with adjustable k=0.01, k=0.1, k=1 and k=10 cell constants for improved flexibility and accuracy
• Each and every unit is hand calibrated and QC'ed by at least 2 teams
• Simple one point calibration

Upgraded User Experience and Usability

While the Basis Series provides the quality readings you expect, it does so in a design that optimizes its user-friendliness and minimizes its footprint on your workstation.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Convenient one point calibration
• Automatically determines the best conductivity ranges to display readings
• Well-situated keys with tactile feedback
• Splash-resistant case made with durable, reinforced plastic for added protection
• AC adaptor or battery powered

Improved Electrode Serviceability and Low Cost of Ownership

The Basis Series Conductivity/TDS/Salinity meter uses a common Jenco 8-pin DIN connector so it works with our other conductivity electrodes. The decision to make the electrode arm a detached, optional accessory further allows the Basis Series to be setup in the way that works best for you.

• Splash-resistant case is made with durable, reinforced plastic for added protection
• 8-pin DIN connector for conductivity cell & 10k thermistor
• Optional, detached electrode arm

103KA Handheld Conductivity Meter Kit by Jenco

Conductivity handheld meter with LCD display, rugged splash proof case and replaceable K-1.0 conductivity probe. Has cell adjust and automatic temperature compensation from 5 to 55°C. Uses one 9 volt battery, 50 hours typical usage on one battery.

Includes:

• 103 Handheld Conductivity Meter
• K=1 Conductivity Cell

• LCD display
• Conductivity cell adjust
• High stability
• Rugged case
• CEll constant k = 1.0

103KB Handheld Conductivity Meter Kit by Jenco

Conductivity handheld meter with LCD display, rugged splash proof case and replaceable K-1.0 conductivity probe. Has cell adjust and automatic temperature compensation from 5 to 55°C. Uses one 9 volt battery, 50 hours typical usage on one battery.

Includes:

• 103 Handheld Conductivity Meter
• K=1 Conductivity Cell
• 103F Carrying Case

• LCD display
• Conductivity cell adjust
• High stability
• Rugged case
• CEll constant k = 1.0

103KC Handheld Conductivity Meter Kit by Jenco

Conductivity handheld meter with LCD display, rugged splash proof case and replaceable K-1.0 conductivity probe. Has cell adjust and automatic temperature compensation from 5 to 55°C. Uses one 9 volt battery, 50 hours typical usage on one battery.

Includes:

• 103 Handheld Conductivity Meter
• K=1 Conductivity Cell
• 103F Carrying Case
• 008 Probe Holder

• LCD display
• Conductivity cell adjust
• High stability
• Rugged case
• CEll constant k = 1.0

3010K Conductivity Meter Kit by Jenco

Includes:

• 3010 Conductivity Meter
• 106A Glass/Platinum, w/ 4-pin connector, K=1.0

3010KA Conductivity Meter Kit by Jenco

Includes:

• 3010 Conductivity Meter
• 107A: Conductivity Probe, Glass, K=10, 3-ft

3010KB Conductivity Meter Kit by Jenco

Includes:

• 3010 Conductivity Meter
• 109A: Conductivity Probe, Glass, K=0.1, 3-ft

3010M+106A Handheld Cond/TDS/Sal/Temp Meter Kit by Jenco

Includes:

• 3010M Handheld Cond/TDS/Sal/Temp Meter
• 106A Two-wire conductivity cell with 4 PIN connector, K=1.0 (0.02~20.00mS/cm).

• Simultaneous displays of conductivity, salinity or TDS with temperature measurements.
• 50 data set reviewable memory.
• Convenient one point calibration. Calibration data is stored in memory and ready for use on power up.
• Selectable cell constants for true wide range readings.
• Adjustable TDS coefficient, reference temperature and temperature coefficient.
• Uses one conductivity cell for conductivity, salinity and TDS measurements.
• Accepts 2-wire conductivity cells with K=0.1, 1.0 and 10.0 cell constants for improved flexibility and accuracy.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof.
• Low battery indicator.
• RoHS and CE compliant.

3010M+107A Handheld Cond/TDS/Sal/Temp Meter Kit by Jenco

Includes:

• 3010M Handheld Cond/TDS/Sal/Temp Meter
• 107A Two-wire conductivity cell with 4 PIN connector, K=10.0 (1.0~200.0mS/cm).

• Simultaneous displays of conductivity, salinity or TDS with temperature measurements.
• 50 data set reviewable memory.
• Convenient one point calibration. Calibration data is stored in memory and ready for use on power up.
• Selectable cell constants for true wide range readings.
• Adjustable TDS coefficient, reference temperature and temperature coefficient.
• Uses one conductivity cell for conductivity, salinity and TDS measurements.
• Accepts 2-wire conductivity cells with K=0.1, 1.0 and 10.0 cell constants for improved flexibility and accuracy.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof.
• Low battery indicator.
• RoHS and CE compliant.

3173R Large LCD Conductivity/TDS/Temperature Benchtop Meter with RS-232 by Jenco

Conductivity/TDS/Temperature benchtop meter, with an extra large LCD display, adjustable cell constants K=0.1, 1.0, 10.0, programmable temperature co-efficient and reference temperature. Available with RS-232C computer interface. Battery or 115/230 AC powered. CE approved.

• Clear, large LCD display (4 1/8 x 3 1/16 in.).
• Displays conductivity and temperature, or tds and temperature readings at the same time.
• Accepts 2-wire conductivity cells with adjustable k=0.1, k=1 and k=10 cell constants for improved flexibility and accuracy.
• Auto or manual ranging of 3 conductivity ranges are available for improved usability.
• Convenient one point calibration. calibration data is stored in memory and is ready for use on power up.
• Readings are automatically compensated for temperature (ATC). meter automatically switches into manual
• compensation when temperature probe is not present.
• Automatic lock mode is available to lock in stable readings.
• Intuitive operation with membrane keypad with tactile and audio feedback.
• Splash resistant case is made with durable, reinforced plastic for added protection. protective covers for connectors are included.
• Large LCD is offset for improved protection against unintentional damage.
• Smaller case does not clutter valuable desk space.
• RS-232 computer interface.
• 8pin DIN connector for conductivity cell & 10k thermistor.
• AC adaptor or battery power.

3175 Microcomputer Based Conductivity/TDS/Temperature Benchtop Meter by Jenco

Jenco EC3175 is a new conductivity meter with temperature readout, backlit LCD display, selectable cell constant and a streamlined look.

This benchtop meter is RoHS compliant.

• Clear, large LCD display with backlight
• Displays conductivity and temperature at same time
• Accepts 2-wire conductivity cells with adjustable k=0.1, k=1 and k=10 cell constants for improved flexibility and accuracy
• Convenient one point calibration
• Calibration data is stored in memory and is ready for use on power up
• Automatically selects one of three conductivity ranges to display readings
• Readings are automatically compensated for temperature (ATC)
• Meter automatically switches into manual compensation when temperature probe is not present
• Automatic lock mode is available to lock in stable readings
• Intuitive operation with membrane keypad with tactile and audio feedback.
• Splash resistant case is made with durable, reinforced plastic for added protection. protective covers for connectors are included
• Smaller case does not clutter valuable desk space
• 8pin DIN connector for conductivity cell & 10k thermistor
• AC adaptor or battery power

3177M Benchtop, Conductivity/Temperature/TDS Meter by Jenco

The Basis Series Conductivity/TDS/Salinity benchtop is the latest entry-level meter from a line that is renowned for its reading quality, now with a refined user experience and improved usability.

• Renowned accuracy and repeatability
• Upgraded user experience and usability
• Low cost of ownership

The Basis Series Conductivity/TDS/Salinity meter, along with the pH/mV model, forms the foundation of Jenco s benchtop meter offerings and comes from a long line of distinguished benchtop meters, where low cost of ownership, reading quality and build quality take precedent.

Benchtop Conductivity/TDS/Salinity Meter Renowned for Accuracy and Repeatability

The reason Jenco is consistently contracted to build products for well-respected brands and the reason we can consistently win the trust of end-users is due to our reputation for being focused on reading quality. Do the right things in the right way, no cutting corners.

• Repeatable readings with ±0.5% full scale accurate across entire measurement range
• Uses 2-wire conductivity cells with adjustable k=0.1 or 4-wire conductivity cells k=0.475 cell constants for improved flexibility and accuracy
• Each and every unit is hand calibrated and QC'ed by at least 2 teams
• Simple one point calibration

Upgraded User Experience and Usability

While the Basis Series provides the quality readings you expect, it does so in a design that optimizes its user-friendliness and minimizes its footprint on your workstation.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Convenient one point calibration
• Automatically determines the best conductivity ranges to display readings
• Well-situated keys with tactile feedback
• Splash-resistant case made with durable, reinforced plastic for added protection
• AC adaptor or battery powered

Improved Electrode Serviceability and Low Cost of Ownership

The Basis Series Conductivity/TDS/Salinity meter uses a common Jenco 8-pin DIN connector so it works with our other conductivity electrodes. The decision to make the electrode arm a detached, optional accessory further allows the Basis Series to be setup in the way that works best for you.

• Splash-resistant case is made with durable, reinforced plastic for added protection
• 8-pin DIN connector for conductivity cell & 10k thermistor
• Optional, detached electrode arm

3840 VisionPlus 4-Wire Portable Conductivity/TDS/Temperature Meter by Jenco

VisionPlus EC3840 is an easy to use, IP67 rated portable conductivity meter with TDS, salinity and temperature readouts. Key features include a water-proof / dust-proof body, 4-wire conductivity cell, selectable cell constant and adjustable TDS coefficient.

• Simultaneous display of conductivity, salinity or TDS with temp. measurements
• Selectable cell constants for true wide range readings
• Adjustable TDS coefficient, reference temp., temp. coefficient for most flexible and accurate TDS readings
• Automatically finds the most suitable display range for your measurements
• Accepts 4-wire conductivity cell
• Uses one conductivity cell for conductivity, salinity and TDS measurements
• IP67 rated body for water-proof (up to 1 meter) and dust-proof operation
• Removable shock-resistant rubber boot

392 Conductivity Transmitter, K=1, uS/mS Lo Multi-Range by Jenco

Conductivity Transmitter, panel mount, 1/8 DIN aluminum package, K=1.0 cell constant, isolated 4-20 mA analog transmitter current output, ATC is 10K thermistor for 5 to 55°C. Connections are to terminal blocks via spade lug connectors. 115/230V AC powered.

• Selectable wide measurement range
• Isolated 4-20ma output
• Automatic temperature compensation
• Selectable us/cm or ms/cm
• Adjustable zero
• High 50/60 hz noise rejection
• 1/8 DIN package