Jenco, Jenco

6503 ORP Transmitter/Controller with 1 ORP & 1 pH Inputs, 1/4 DIN by Jenco

1/4 DIN panel mount ORP controller/transmitter, microprocessor based, password protected with membrane keypad. LCD displays ORP or pH and temp. Meter has dual SPDT Hi/Lo relays, with programmable hysteresis and a reversible, isolated and programmable 4-20 mA output. Connectors are dual BNC for pH/ORP and spade lug type. ATC is 10K thermistor or simulation resistor. Power 115 / 230V AC

• Controls ORP & measures pH
• Offset calibration for ORP
• Set point security code protection
• Dual on/off relays
• 0.5 high LCD display
• Auto/manual temp. compensation
• Power down memory backup
• Audio feed back touch keys
• 1/4 DIN housing

671PKA Benchtop pH/mV/Temp Meter Kit by Jenco

pH/mV/Temp. benchtop meter with LCD digital display, voltage recorder output, Karl Fisher output and Pt-100 ATC or manual temperature compensation. Calibration is via knobs and potentiometer. Connectors are BNC or U.S. standard connector with reference pin and banana plugs for ATC and recorder. AC/DC Powered.

Includes:

• 671P Benchtop pH/mV/Temp Meter
• 600P pH Probe
• 600D115 AC Adapter

• All solid state design
• Low drift and high stability
• Fast input response
• Battery low indicator
• Standby batteries for field application
• Karl fischer current output
• Analog recorder output
• 50hz, 60 hz rejection
• Manual and automatic temperature compensation
• 0 to 100°C temperature measurement
• Auto-polarity mv measurement
• UL approved ac line adaptor

671PKB Benchtop pH/mV/Temp Meter Kit by Jenco

pH/mV/Temp. benchtop meter with LCD digital display, voltage recorder output, Karl Fisher output and Pt-100 ATC or manual temperature compensation. Calibration is via knobs and potentiometer. Connectors are BNC or U.S. standard connector with reference pin and banana plugs for ATC and recorder. AC/DC Powered.

Includes:

• 671P Benchtop pH/mV/Temp Meter
• 600P pH Probe
• 600A Temp. Probe
• 600D115 AC Adapter

• All solid state design
• Low drift and high stability
• Fast input response
• Battery low indicator
• Standby batteries for field application
• Karl fischer current output
• Analog recorder output
• 50hz, 60 hz rejection
• Manual and automatic temperature compensation
• 0 to 100°C temperature measurement
• Auto-polarity mv measurement
• UL approved ac line adaptor

676 Monitor, No Relays, LCD, BNC, 1/8 DIN (Probe Sold Separately) by Jenco

• LCD displays pH or mV.
• Automatic temperature compensation for pH, 0 to 100?.
• pH/ORP select switch.
• Set points on front panel.
• Easy to install.

691N 1/8 DIN Panel Mount pH Transmitter with Calibration by Jenco

1/8 DIN panel mount pH transmitter with calibration by potentiometers. Has a manual temperature control knob and normal transmitter output of 4-20 mA output for 0-14 pH range or in expanded mode 4-2mA can be for any 2 pH units from 0 to 14 pH. Features a large bright red LED display. Connectors are a BNC pH input and spade lug screw type connector block. 115/230V AC.

• Current output with selectable span for better accuracy
• Manual temp. compensation
• 0.56 high efficiency red led display
• Low power consumption
• Reduced internal heating for increased reliability
• Heat cycled 100 hrs
• Isolated 4-20 mA output span of 0 to 14 pH over any 2 pH

693-ORP 2-Wire DC Blind ORP Transmitter, NEMA-4 Case by Jenco

2-wire 4-20 mA ORP transmitter in a sealed NEMA-4 enclosure powered by 11 to 80 Volts DC. Span is fixed 1400 mV span. Connections are BNC for mV/ORP.

• Input/output isolated
• Nema 4x enclosure
• 4 to 20 mA output
• High accuracy
• BNC input connector
• High input impedance
• Wide range power supply ,12 to 80 VDC

693-pH 2-wire 4-20 mA pH Transmitter by Jenco

2-wire 4-20 mA pH transmitter in a sealed NEMA-4 enclosure powered by 11 to 80 Volts DC. Span is fixed 0-14 pH. Connectors are BNC and tinned leads for 3-K Balco ATC sensor or simulation resistor.

• Input/output isolated
• Nema 4x enclosure
• 4 to 20 mA output
• High accuracy
• BNC input connector
• High input impedance
• Wide range power supply ,12 to 80 VDC

695-ORP 2-Wire DC LCD ORP Transmitter, NEMA-4 Case by Jenco

2-wire 4-20 mA ORP transmitter in a sealed NEMA-4 enclosure with an LCD display powered by 11 to 80 Volts DC. Span is selectable any 100 to 1400 mV unit by dipswitch. Connections are BNC for ORP.

• Input/output isolated
• Nema 4x enclosure
• Large LCD display
• 4 to 20 mA output
• High accuracy
• BNC input connector
• High input impedance
• 4 to 20 mA output scalable to any 100mv unit span
• Wide range power supply ,12 to 80 VDC

695-pH 2-wire 4-20 mA pH Transmitter by Jenco

2-wire 4-20 mA pH transmitter in a sealed NEMA-4 enclosure with an LCD display powered by 11 to 80 Volts DC. Span is selectable any 1 to 14 pH unit via internal dip switch. Connections are BNC for pH and tinned leads for 3-K Balco ATC sensor or simulation resistor.

• Input/output isolated
• Nema 4x enclosure
• Large LCD display
• 4 to 20 mA output
• High accuracy
• BNC input connector
• High input impedance
• 4 to 20 mA output scalable to any 1 pH or 100mv unit span (695pH/695ORP only)
• Manual/auto temp. compensation
• Wide range power supply ,12 to 80 VDC

6TX 2-Wire DC LCD Transmitter/Controller by Jenco

• Clear LCD displays pH or mV, simultaneously with temperature.
• Automatic buffer recognition of US and NIST buffer sets. Calibration data is stored in memory and is ready for use on power up.
• Isolated and reversible 4-20 mA current output for pH or ORP allows It to be used as a proportional output.
• Auto or Manual Temperature Compensation.
• IP65

7000APL Microprocessor Panel Meter, 1/8 DIN, Selectable by Jenco

Panel mount digital thermometer user selectable for type via external dip switch with front panel touch switch for selecting °C or °F. Features bright red LED display and a 1/8 DIN plastic housing. Model 7001APL has Min/Max switch for display of Min/Max temperatures. Available for types. J, K, T, E, N, R, S, DIN-T and DIN J. Ambient range-10 to 60°C. 115/230V AC operation.

• CMOS microcomputer design
• Cold junction compensation
• T/c calibration for types-k,j,t,e,n,r,din t,din j
• T/c type, resolution and unit default select by dip switch
• Wide temperature ranges
• Error indicators
• Front panel °C/°F selectable
• 1°C/0.1°C resolution selectable
• Min/max display
• 0.56 led display
• Easy to install, metal mounting bracket
• Wide operation temperature
• High accuracy and low cost