Jenco, Jenco

3010M Handheld Cond/TDS/Sal/Temp Meter with Memories by Jenco

• Simultaneous displays of conductivity, salinity or TDS with temperature measurements.
• 50 data set reviewable memory.
• Convenient one point calibration. Calibration data is stored in memory and ready for use on power up.
• Selectable cell constants for true wide range readings.
• Adjustable TDS coefficient, reference temperature and temperature coefficient.
• Uses one conductivity cell for conductivity, salinity and TDS measurements.
• Accepts 2-wire conductivity cells with K=0.1, 1.0 and 10.0 cell constants for improved flexibility and accuracy.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof.
• Low battery indicator.
• RoHS and CE compliant.

3010M+106A Handheld Cond/TDS/Sal/Temp Meter Kit by Jenco

Includes:

• 3010M Handheld Cond/TDS/Sal/Temp Meter
• 106A Two-wire conductivity cell with 4 PIN connector, K=1.0 (0.02~20.00mS/cm).

• Simultaneous displays of conductivity, salinity or TDS with temperature measurements.
• 50 data set reviewable memory.
• Convenient one point calibration. Calibration data is stored in memory and ready for use on power up.
• Selectable cell constants for true wide range readings.
• Adjustable TDS coefficient, reference temperature and temperature coefficient.
• Uses one conductivity cell for conductivity, salinity and TDS measurements.
• Accepts 2-wire conductivity cells with K=0.1, 1.0 and 10.0 cell constants for improved flexibility and accuracy.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof.
• Low battery indicator.
• RoHS and CE compliant.

3010M+107A Handheld Cond/TDS/Sal/Temp Meter Kit by Jenco

Includes:

• 3010M Handheld Cond/TDS/Sal/Temp Meter
• 107A Two-wire conductivity cell with 4 PIN connector, K=10.0 (1.0~200.0mS/cm).

• Simultaneous displays of conductivity, salinity or TDS with temperature measurements.
• 50 data set reviewable memory.
• Convenient one point calibration. Calibration data is stored in memory and ready for use on power up.
• Selectable cell constants for true wide range readings.
• Adjustable TDS coefficient, reference temperature and temperature coefficient.
• Uses one conductivity cell for conductivity, salinity and TDS measurements.
• Accepts 2-wire conductivity cells with K=0.1, 1.0 and 10.0 cell constants for improved flexibility and accuracy.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof.
• Low battery indicator.
• RoHS and CE compliant.

3010M+109A Handheld Cond/TDS/Sal/Temp Meter Kit by Jenco

Includes:

• 3010M Handheld Cond/TDS/Sal/Temp Meter
• 109A Two-wire conductivity cell with 4 PIN connector, K=0.1 (0.0~200.0uS/cm).

• Simultaneous displays of conductivity, salinity or TDS with temperature measurements.
• 50 data set reviewable memory.
• Convenient one point calibration. Calibration data is stored in memory and ready for use on power up.
• Selectable cell constants for true wide range readings.
• Adjustable TDS coefficient, reference temperature and temperature coefficient.
• Uses one conductivity cell for conductivity, salinity and TDS measurements.
• Accepts 2-wire conductivity cells with K=0.1, 1.0 and 10.0 cell constants for improved flexibility and accuracy.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof.
• Low battery indicator.
• RoHS and CE compliant.

3020M Handheld Conductivity/Salinity/TDS/Temperature Meter with Memory by Jenco

• Simultaneous displays of conductivity, salinity or TDS with temperature measurements.
• 50 data set reviewable memory.
• Convenient one point calibration. Calibration data is stored in memory and ready for use on power up.
• Adjustable TDS coefficient, reference temperature and temperature coefficient.
• Uses one conductivity cell for conductivity, salinity and TDS measurements.
• Accepts 4-wire conductivity cell with K=0.475 cell constant and 2-wire K=0.1 cell constants for improved flexibility and accuracy.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof.
• Low battery indicator.
• RoHS and CE compliant.

3020M Handheld Conductivity/Salinity/TDS/Temperature Kit Meter by Jenco

• Simultaneous displays of conductivity, salinity or TDS with temperature measurements.
• 50 data set reviewable memory.
• Convenient one point calibration. Calibration data is stored in memory and ready for use on power up.
• Adjustable TDS coefficient, reference temperature and temperature coefficient.
• Uses one conductivity cell for conductivity, salinity and TDS measurements.
• Accepts 4-wire conductivity cell with K=0.475 cell constant and 2-wire K=0.1 cell constants for improved flexibility and accuracy.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof.
• Low battery indicator.
• RoHS and CE compliant.

Includes:

• 3020M: Meter with memory
• 3020P: Conductivity Probe

3020MKA Handheld Conductivity/Salinity/TDS/Temperature Meter Kit by Jenco

• Simultaneous displays of conductivity, salinity or TDS with temperature measurements.
• 50 data set reviewable memory.
• Convenient one point calibration. Calibration data is stored in memory and ready for use on power up.
• Adjustable TDS coefficient, reference temperature and temperature coefficient.
• Uses one conductivity cell for conductivity, salinity and TDS measurements.
• Accepts 4-wire conductivity cell with K=0.475 cell constant and 2-wire K=0.1 cell constants for improved flexibility and accuracy.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof.
• Low battery indicator.
• RoHS and CE compliant.

Includes:

• 3020M: Meter with memory
• 3020P: Conductivity Probe
• 3020F: Carrying Case

3107 Benchtop Meter with RS-232 Interface by Jenco

The Jenco Model 3107 bench type Conductivity, Salinity, Temperature System is a rugged, microprocessor based instrument designed for use in field laboratories and process control applications, using a four electrode cell, it is an essential tool for precise measurements of conductivity, salinity and temperature.

3107K Benchtop Meter with RS-232 Interface Kit by Jenco

The Jenco Model 3107 bench type Conductivity, Salinity, Temperature System is a rugged, microprocessor based instrument designed for use in field laboratories and process control applications, using a four electrode cell, it is an essential tool for precise measurements of conductivity, salinity and temperature.

Includes:

• 3107 Benchtop Meter with RS-232 Interface
• K=1 Cond. Probe
• 6007D115 AC Adapter

3173K0.1 Large LCD Conductivity/TDS/Temperature Benchtop Meter Kit by Jenco

Conductivity/TDS/Temperature benchtop meter, with an extra large LCD display, adjustable cell constants K=0.1, 1.0, 10.0, programmable temperature co-efficient and reference temperature. Battery or 115/230 AC powered. CE approved.

Includes:

• 3173: Benchtop Conductivity meter
• 109: Conductivity Probe, K=0.1
• Choice of 6230D115: 120V AC adapter or 6230D230: 220V AC adapter

• Clear, large LCD display (4 1/8 x 3 1/16 in.).
• Displays conductivity and temperature, or tds and temperature readings at the same time.
• Accepts 2-wire conductivity cells with adjustable k=0.1, k=1 and k=10 cell constants for improved flexibility and accuracy.
• Auto or manual ranging of 3 conductivity ranges are available for improved usability.
• Convenient one point calibration. calibration data is stored in memory and is ready for use on power up.
• Readings are automatically compensated for temperature (ATC). meter automatically switches into manual
• compensation when temperature probe is not present.
• Automatic lock mode is available to lock in stable readings.
• Intuitive operation with membrane keypad with tactile and audio feedback.
• Splash resistant case is made with durable, reinforced plastic for added protection. protective covers for connectors are included.
• Large LCD is offset for improved protection against unintentional damage.
• Smaller case does not clutter valuable desk space.
• 8pin DIN connector for conductivity cell & 10k thermistor.
• AC adaptor or battery power.

3173K1 Large LCD Conductivity/TDS/Temperature Benchtop Meter Kit by Jenco

Conductivity/TDS/Temperature benchtop meter, with an extra large LCD display, adjustable cell constants K=0.1, 1.0, 10.0, programmable temperature co-efficient and reference temperature. Battery or 115/230 AC powered. CE approved.

Includes:

• 3173: Benchtop Conductivity meter
• Choice of 101: Epoxy, Conductovity probe, K=1.0, 3-ft or 106: Glass, Conductivity probe, K=1.0, 3-ft
• Choice of 6230D115: 120V AC adapter or 6230D230: 220V AC adapter

• Clear, large LCD display (4 1/8 x 3 1/16 in.).
• Displays conductivity and temperature, or tds and temperature readings at the same time.
• Accepts 2-wire conductivity cells with adjustable k=0.1, k=1 and k=10 cell constants for improved flexibility and accuracy.
• Auto or manual ranging of 3 conductivity ranges are available for improved usability.
• Convenient one point calibration. calibration data is stored in memory and is ready for use on power up.
• Readings are automatically compensated for temperature (ATC). meter automatically switches into manual
• compensation when temperature probe is not present.
• Automatic lock mode is available to lock in stable readings.
• Intuitive operation with membrane keypad with tactile and audio feedback.
• Splash resistant case is made with durable, reinforced plastic for added protection. protective covers for connectors are included.
• Large LCD is offset for improved protection against unintentional damage.
• Smaller case does not clutter valuable desk space.
• 8pin DIN connector for conductivity cell & 10k thermistor.
• AC adaptor or battery power.

3173K10 Large LCD Conductivity/TDS/Temperature Benchtop Meter Kit by Jenco

Conductivity/TDS/Temperature benchtop meter, with an extra large LCD display, adjustable cell constants K=0.1, 1.0, 10.0, programmable temperature co-efficient and reference temperature. Battery or 115/230 AC powered. CE approved.

Includes:

• 3173: Benchtop Conductivity meter
• 107: Conductivity Probe, K=10.00
• Choice of 6230D115: 120V AC adapter or 6230D230: 220V AC adapter

• Clear, large LCD display (4 1/8 x 3 1/16 in.).
• Displays conductivity and temperature, or tds and temperature readings at the same time.
• Accepts 2-wire conductivity cells with adjustable k=0.1, k=1 and k=10 cell constants for improved flexibility and accuracy.
• Auto or manual ranging of 3 conductivity ranges are available for improved usability.
• Convenient one point calibration. calibration data is stored in memory and is ready for use on power up.
• Readings are automatically compensated for temperature (ATC). meter automatically switches into manual
• compensation when temperature probe is not present.
• Automatic lock mode is available to lock in stable readings.
• Intuitive operation with membrane keypad with tactile and audio feedback.
• Splash resistant case is made with durable, reinforced plastic for added protection. protective covers for connectors are included.
• Large LCD is offset for improved protection against unintentional damage.
• Smaller case does not clutter valuable desk space.
• 8pin DIN connector for conductivity cell & 10k thermistor.
• AC adaptor or battery power.

3173R Large LCD Conductivity/TDS/Temperature Benchtop Meter with RS-232 by Jenco

Conductivity/TDS/Temperature benchtop meter, with an extra large LCD display, adjustable cell constants K=0.1, 1.0, 10.0, programmable temperature co-efficient and reference temperature. Available with RS-232C computer interface. Battery or 115/230 AC powered. CE approved.

• Clear, large LCD display (4 1/8 x 3 1/16 in.).
• Displays conductivity and temperature, or tds and temperature readings at the same time.
• Accepts 2-wire conductivity cells with adjustable k=0.1, k=1 and k=10 cell constants for improved flexibility and accuracy.
• Auto or manual ranging of 3 conductivity ranges are available for improved usability.
• Convenient one point calibration. calibration data is stored in memory and is ready for use on power up.
• Readings are automatically compensated for temperature (ATC). meter automatically switches into manual
• compensation when temperature probe is not present.
• Automatic lock mode is available to lock in stable readings.
• Intuitive operation with membrane keypad with tactile and audio feedback.
• Splash resistant case is made with durable, reinforced plastic for added protection. protective covers for connectors are included.
• Large LCD is offset for improved protection against unintentional damage.
• Smaller case does not clutter valuable desk space.
• RS-232 computer interface.
• 8pin DIN connector for conductivity cell & 10k thermistor.
• AC adaptor or battery power.

3173RK0.1 Large LCD Conductivity/TDS/Temperature Benchtop Meter Kit by Jenco

Conductivity/TDS/Temperature benchtop meter, with an extra large LCD display, adjustable cell constants K=0.1, 1.0, 10.0, programmable temperature co-efficient and reference temperature. Available with RS-232C computer interface. Battery or 115/230 AC powered. CE approved.

Includes:

• 3173R Large LCD Conductivity/TDS/Temperature Benchtop Meter
• 109: Conductivity Probe, K=0.1
• Choice of 6230D115: 120V AC adapter or 6230D230: 220V AC adapter

• Clear, large LCD display (4 1/8 x 3 1/16 in.).
• Displays conductivity and temperature, or tds and temperature readings at the same time.
• Accepts 2-wire conductivity cells with adjustable k=0.1, k=1 and k=10 cell constants for improved flexibility and accuracy.
• Auto or manual ranging of 3 conductivity ranges are available for improved usability.
• Convenient one point calibration. calibration data is stored in memory and is ready for use on power up.
• Readings are automatically compensated for temperature (ATC). meter automatically switches into manual
• compensation when temperature probe is not present.
• Automatic lock mode is available to lock in stable readings.
• Intuitive operation with membrane keypad with tactile and audio feedback.
• Splash resistant case is made with durable, reinforced plastic for added protection. protective covers for connectors are included.
• Large LCD is offset for improved protection against unintentional damage.
• Smaller case does not clutter valuable desk space.
• RS-232 computer interface.
• 8pin DIN connector for conductivity cell & 10k thermistor.
• AC adaptor or battery power.

3173RK1 Large LCD Conductivity/TDS/Temperature Benchtop Meter Kit by Jenco

Conductivity/TDS/Temperature benchtop meter, with an extra large LCD display, adjustable cell constants K=0.1, 1.0, 10.0, programmable temperature co-efficient and reference temperature. Available with RS-232C computer interface. Battery or 115/230 AC powered. CE approved.

Includes:

• 3173R Large LCD Conductivity/TDS/Temperature Benchtop Meter
• Choice of 101: Epoxy, Conductovity probe, K=1.0, 3-ft or 106: Glass, Conductivity probe, K=1.0, 3-ft
• Choice of 6230D115: 120V AC adapter or 6230D230: 220V AC adapter

• Clear, large LCD display (4 1/8 x 3 1/16 in.).
• Displays conductivity and temperature, or tds and temperature readings at the same time.
• Accepts 2-wire conductivity cells with adjustable k=0.1, k=1 and k=10 cell constants for improved flexibility and accuracy.
• Auto or manual ranging of 3 conductivity ranges are available for improved usability.
• Convenient one point calibration. calibration data is stored in memory and is ready for use on power up.
• Readings are automatically compensated for temperature (ATC). meter automatically switches into manual
• compensation when temperature probe is not present.
• Automatic lock mode is available to lock in stable readings.
• Intuitive operation with membrane keypad with tactile and audio feedback.
• Splash resistant case is made with durable, reinforced plastic for added protection. protective covers for connectors are included.
• Large LCD is offset for improved protection against unintentional damage.
• Smaller case does not clutter valuable desk space.
• RS-232 computer interface.
• 8pin DIN connector for conductivity cell & 10k thermistor.
• AC adaptor or battery power.

3173RK10 Large LCD Conductivity/TDS/Temperature Benchtop Meter Kit by Jenco

Conductivity/TDS/Temperature benchtop meter, with an extra large LCD display, adjustable cell constants K=0.1, 1.0, 10.0, programmable temperature co-efficient and reference temperature. Available with RS-232C computer interface. Battery or 115/230 AC powered. CE approved.

Includes:

• 3173R Large LCD Conductivity/TDS/Temperature Benchtop Meter
• 107: Conductivity Probe, K=10.00
• Choice of 6230D115: 120V AC adapter or 6230D230: 220V AC adapter

• Clear, large LCD display (4 1/8 x 3 1/16 in.).
• Displays conductivity and temperature, or tds and temperature readings at the same time.
• Accepts 2-wire conductivity cells with adjustable k=0.1, k=1 and k=10 cell constants for improved flexibility and accuracy.
• Auto or manual ranging of 3 conductivity ranges are available for improved usability.
• Convenient one point calibration. calibration data is stored in memory and is ready for use on power up.
• Readings are automatically compensated for temperature (ATC). meter automatically switches into manual
• compensation when temperature probe is not present.
• Automatic lock mode is available to lock in stable readings.
• Intuitive operation with membrane keypad with tactile and audio feedback.
• Splash resistant case is made with durable, reinforced plastic for added protection. protective covers for connectors are included.
• Large LCD is offset for improved protection against unintentional damage.
• Smaller case does not clutter valuable desk space.
• RS-232 computer interface.
• 8pin DIN connector for conductivity cell & 10k thermistor.
• AC adaptor or battery power.

3173RK Large LCD Conductivity/TDS/Temperature Benchtop Meter Kit by Jenco

Conductivity/TDS/Temperature benchtop meter, with an extra large LCD display, adjustable cell constants K=0.1, 1.0, 10.0, programmable temperature co-efficient and reference temperature. Available with RS-232C computer interface. Battery or 115/230 AC powered. CE approved.

Includes:

• 3173R Large LCD Conductivity/TDS/Temperature Benchtop Meter
• K=1 Cond. Probe
• 6230D115 AC Adapter
• 007N Electrode Arm Holder

• Clear, large LCD display (4 1/8 x 3 1/16 in.).
• Displays conductivity and temperature, or tds and temperature readings at the same time.
• Accepts 2-wire conductivity cells with adjustable k=0.1, k=1 and k=10 cell constants for improved flexibility and accuracy.
• Auto or manual ranging of 3 conductivity ranges are available for improved usability.
• Convenient one point calibration. calibration data is stored in memory and is ready for use on power up.
• Readings are automatically compensated for temperature (ATC). meter automatically switches into manual
• compensation when temperature probe is not present.
• Automatic lock mode is available to lock in stable readings.
• Intuitive operation with membrane keypad with tactile and audio feedback.
• Splash resistant case is made with durable, reinforced plastic for added protection. protective covers for connectors are included.
• Large LCD is offset for improved protection against unintentional damage.
• Smaller case does not clutter valuable desk space.
• RS-232 computer interface.
• 8pin DIN connector for conductivity cell & 10k thermistor.
• AC adaptor or battery power.

3175 Microcomputer Based Conductivity/TDS/Temperature Benchtop Meter by Jenco

Jenco EC3175 is a new conductivity meter with temperature readout, backlit LCD display, selectable cell constant and a streamlined look.

This benchtop meter is RoHS compliant.

• Clear, large LCD display with backlight
• Displays conductivity and temperature at same time
• Accepts 2-wire conductivity cells with adjustable k=0.1, k=1 and k=10 cell constants for improved flexibility and accuracy
• Convenient one point calibration
• Calibration data is stored in memory and is ready for use on power up
• Automatically selects one of three conductivity ranges to display readings
• Readings are automatically compensated for temperature (ATC)
• Meter automatically switches into manual compensation when temperature probe is not present
• Automatic lock mode is available to lock in stable readings
• Intuitive operation with membrane keypad with tactile and audio feedback.
• Splash resistant case is made with durable, reinforced plastic for added protection. protective covers for connectors are included
• Smaller case does not clutter valuable desk space
• 8pin DIN connector for conductivity cell & 10k thermistor
• AC adaptor or battery power

3175K0.1 Microcomputer Based Conductivity/TDS/Temperature Benchtop Meter Kit by Jenco

Jenco EC3175 is a new conductivity meter with temperature readout, backlit LCD display, selectable cell constant and a streamlined look.

This benchtop meter is RoHS compliant.

Includes:

• 3175: Benchtop Conductivity meter
• 109: Conductivity Probe, K=0.1
• Choice of 6230D115: 120V AC adapter or 6230D230: 220V AC adapter

• Clear, large LCD display with backlight
• Displays conductivity and temperature at same time
• Accepts 2-wire conductivity cells with adjustable k=0.1, k=1 and k=10 cell constants for improved flexibility and accuracy
• Convenient one point calibration
• Calibration data is stored in memory and is ready for use on power up
• Automatically selects one of three conductivity ranges to display readings
• Readings are automatically compensated for temperature (ATC)
• Meter automatically switches into manual compensation when temperature probe is not present
• Automatic lock mode is available to lock in stable readings
• Intuitive operation with membrane keypad with tactile and audio feedback.
• Splash resistant case is made with durable, reinforced plastic for added protection. protective covers for connectors are included
• Smaller case does not clutter valuable desk space
• 8pin DIN connector for conductivity cell & 10k thermistor
• AC adaptor or battery power