Testo

0560 4170 417 Large Vane Anemometer (4" Dia. Head) by Testo

The compact testo 417 anemometer with built-in flow/temperature vane Ø 100 mm to measure flow speed, volume flow and temperature. Volume flow is shown directly in the display. Accurate volume flow calculation thanks to easy input of duct area. In addition, it is easy to switch to the current temperature reading. The flow direction, i.e. drawn in or blowing, is visible in the display. Timed and multi-point mean calculation provide information on mean volume flow, flow speed and temperature readings. The optional funnel set facilitates efficient measurements at ventilator grilles and disc outlets. Min/max values can also be shown in the display. Current readings can be frozen in the display using the Hold function.

• Direction of flow recognition
• Temperature, flow and volume flow measurement
• Multi-point and timed mean calculation
• Max/min values
• Hold button to freeze readings
• Display light
• Auto Off function
• Built-in Ø 100 mm vane

0560 4251 425 CFM Hot-Wire Anemometer by Testo

The compact testo 425 anemometer with permanently attached thermal flow probe (probe head Ø 7.5 mm) incl. telescopic handle. Volume flow is shown directly in the display. Accurate volume flow calculation thanks to easy input of duct area. In addition, it is also possible to switch to the current temperature reading. Timed and multi-point mean calculation provide information on mean volume flow, flow speed and temperature reading. Min/max values can also be shown in the display. The Hold function makes it possible to freeze current readings in the display.

• Temperature, flow and volume flow measurement
• Multi-point and timed mean calculation
• Max/min values
• Hold button to freeze readings
• Display light
• Auto Off function
• TopSafe, the indestructible protective case (optional)
• TopSafe, instrument protection against dirt and knocks

0560 4351 435-1 Multifunction Meter by Testo

The measuring instrument for ambient air conditions, for assessing Indoor Air Quality and adjusting and inspecting VAC systems. testo 435-1 is an affordable introduction to measurement engineering for ambient air conditions. The new IAQ probe measures Indoor Air Quality by measuring CO2 level, air moisture and air temperature. Temperature and humidity measurement is integrated in the new thermal probe. In addition, it is also possible to connect additional temperature probes. Readings from up to 3 temperature probes can be displayed in the clearly laid-out measuring instrument display; data transmission is radio-controlled, therefore wireless. Measurement data is printed on site on the Testo printer.

• IAQ probe for assessment of Indoor Air Quality
• Vane measurement and thermal probes
• Radio probe for temperature
• Testo fast printer for documentation
• Protection class IP54

0560 4353 435-3 Multifunction Meter with integral differential pressure by Testo

The ambient air conditions measuring instrument for your introduction to professional ambient air measurement engineering. It has the right measurement engineering, e.g. thermal probes, vane or Pitot tube measurement, for every application and flow speed. The new IAQ probe measures Indoor Air Quality by measuring the CO2 level, air moisture and air temperature. Temperature and humidity measurement is built-in in the new thermal probe. In addition, it is also possible to connect additional temperature probes to, for example, accurately measure surface temperature. Readings from up to 3 temperature probes can be displayed in the clearly laid-out measuring instrument display; data transmission is by radio, i.e. wireless. Measurement data is printed on site on the Testo printer.

• IAQ probe for assessing Indoor Air Quality
• Thermal probes, vane measurement and built-in differential pressure probe for Pitot tube measurement
• Radio probe for temperature
• Testo printer for documentation purposes
• Protection class IP54

0560 4401 440 Air Velocity & IAQ Measuring Instrument by Testo

The testo 440 air velocity and IAQ meter combines all the benefits of a compact handheld device with intuitive measurement menus and a comprehensive selection of air velocity & IAQ probes. This means you have all measuring tasks on air conditioning and ventilation systems reliably under control.

You can connect the testo 440 to a large selection of digital probes, the testo Smart Probes, or even numerous Testo temperature probes, allowing for numerous configurations to meet your needs. The clearly structured menus for measuring volume flow in ducts and at outlets, cooling/heating load, K-factor, turbulence, mold indication and even a data logging mode are stored on the instrument for additional convenience. These menus enable you to accomplish the relevant measuring task more quickly, more efficiently and more reliably than ever before. Reports can also be exported as excel files via the USB interface or printed out directly on site.

The testo 440 air velocity & IAQ meter is available in two versions. The standard testo 440 and the testo 440 dP model version, which includes an integrated differential pressure sensor. This makes measurements at filters as well as Pitot tube and K-factor measurements possible.

• Intuitive: Clearly structured measurement menus for volume flow, heating & cooling load, K-factor, turbulence, data logging, mold indication, and more.
• Convenient: Testo 440 kits include instrument-specific wireless and wired probes that offer greater measuring convenience and the instrument also connects to testo smart probes.
• Space-saving: A universal Bluetooth or wired handle for all probes means more applications, with less equipment.
• Efficient: Internal memory for up to 7,500 measurement points, a USB interface for data export and optional printout of all your measuring values.

Kit Includes:

• Air velocity & IAQ meter
• 3 x AA batteries
• USB cable
• Calibration protocol

0560 4450 445 Multifunction Meter by Testo

The testo 445 VAC instrument measures temperature, relative humidity, dew point, absolute humidity, degree of humidity, enthalpy, all types of air velocity (in ducts, duct openings or extractors), volume flow, pressure and indoor air quality.

• Automatic mean calculation and volume flow measurement
• Automatic allocation of duct cross-section to location (max. 99 locations)
• Internal data logger (3,000 readings)
• Simultaneous measurement of up to 6 parameters

0560 5127 512 Digital Manometer/Anemometer +/- 10" WC (0 to 20hPa) by Testo

testo 512 simultaneously shows pressure and flow velocity (apart from version 0 to 2000 hPa) in the large, easily legible, illuminated display, the measurement values can be printed out on site with date and time as well as minimum and maximum values.

testo 512 has two switchable units for flow velocity, and for pressure, eight units can even be set.

In the testo 512, damping for a sliding mean value calculation can be individually programmed, tightness compensation is integrated. The actual value displayed can be frozen in the display with the Hold-button, and the minimum and maximum values can be displayed and stored in the instrument.

The TopSafe protects the instrument from impact, dirt and splash water in tough practical applications (optional).

The differential pressure measuring instrument testo 512 is available in four different versions:

• Measuring range 0 to 2 hPa
• Measuring range 0 to 20 hPa
• Measuring range 0 to 200 hPa
• Measuring range 0 to 2000 hPa (without flow velocity and Pascal measurement)

• 8 pressure units can be selected: kPa, hPa, Pa, mm H2O, mmHg, psi, inch H2O, inch Hg
• 2 flow velocity units can be selected: m/s, fpm
• Integrated tightness compensation
• Display illumination
• Max./min. as well as Hold-function
• Printout of measurement values incl. date/time and min./max. values

0560 5128 512 Digital Manometer +/- 80" WC (0 to 200hPa) by Testo

testo 512 simultaneously shows pressure and flow velocity (apart from version 0 to 2000 hPa) in the large, easily legible, illuminated display, the measurement values can be printed out on site with date and time as well as minimum and maximum values.

testo 512 has two switchable units for flow velocity, and for pressure, eight units can even be set.

In the testo 512, damping for a sliding mean value calculation can be individually programmed, tightness compensation is integrated. The actual value displayed can be frozen in the display with the Hold-button, and the minimum and maximum values can be displayed and stored in the instrument.

The TopSafe protects the instrument from impact, dirt and splash water in tough practical applications (optional).

The differential pressure measuring instrument testo 512 is available in four different versions:

• Measuring range 0 to 2 hPa
• Measuring range 0 to 20 hPa
• Measuring range 0 to 200 hPa
• Measuring range 0 to 2000 hPa (without flow velocity and Pascal measurement)

• 8 pressure units can be selected: kPa, hPa, Pa, mm H2O, mmHg, psi, inch H2O, inch Hg
• 2 flow velocity units can be selected: m/s, fpm
• Integrated tightness compensation
• Display illumination
• Max./min. as well as Hold-function
• Printout of measurement values incl. date/time and min./max. values

0560 5129 512 Digital Manometer +/- 30psi (0 to 2000hPa) by Testo

testo 512 simultaneously shows pressure and flow velocity (apart from version 0 to 2000 hPa) in the large, easily legible, illuminated display, the measurement values can be printed out on site with date and time as well as minimum and maximum values.

testo 512 has two switchable units for flow velocity, and for pressure, eight units can even be set.

In the testo 512, damping for a sliding mean value calculation can be individually programmed, tightness compensation is integrated. The actual value displayed can be frozen in the display with the Hold-button, and the minimum and maximum values can be displayed and stored in the instrument.

The TopSafe protects the instrument from impact, dirt and splash water in tough practical applications (optional).

The differential pressure measuring instrument testo 512 is available in four different versions:

• Measuring range 0 to 2 hPa
• Measuring range 0 to 20 hPa
• Measuring range 0 to 200 hPa
• Measuring range 0 to 2000 hPa (without flow velocity and Pascal measurement)

• 8 pressure units can be selected: kPa, hPa, Pa, mm H2O, mmHg, psi, inch H2O, inch Hg
• 2 flow velocity units can be selected: m/s, fpm
• Integrated tightness compensation
• Display illumination
• Max./min. as well as Hold-function
• Printout of measurement values incl. date/time and min./max. values

0560 5210 521-1 Differential Pressure Meter (0 to 100hPa/ +/-40"WC, 0.2% acc.) by Testo

The highly accurate differential pressure meter, testo 521, with an internal pressure sensor from 0 to 100 hPa is ideal for Pitot tube measurements in the range 5 to 100 m/s. testo 521 is available in 2 accuracy classes. testo 521-1 with an internal pressure sensor with Class 0.2, testo 521-2 with an internal pressure sensor with Class 0.1. In the case of velocity speeds in the range from 1 to 12 m/s, you can carry out accurate measurements using the 100 Pa probe which can be attached externally. The measurement data can be saved according to location and analysed on your PC or printed on site on your Testo fast printer.

• Temp. compensated differential pressure sensor in instrument
• Additional 2 probe sockets for measuring pressure and temp.
• Direct calculation of velocity speed and volume flow
• Multi-point and timed mean calculation
• Density compensation
• Up to two 4 to 20 mA interfaces connectable to hand-held instr.
• 1 analog signal can be evaluated per interface
• Scaling of analog signal in hand-held instrument
• Transmitter can be supplied with power from testo 521, for example
• 4 to 20 mA interface can be connected to testo 521, 526, 400, 650 und 950 hand-held instruments
• Two user-defined probe inputs allow the connection of external probes for pressure, temperature, current/voltage

0560 5211 521-2 Differential Pressure Meter (0 to 100hPa/ +/-40"WC, 0.1% acc.) by Testo

The highly accurate differential pressure meter, testo 521, with an internal pressure sensor from 0 to 100 hPa is ideal for Pitot tube measurements in the range 5 to 100 m/s. testo 521 is available in 2 accuracy classes. testo 521-1 with an internal pressure sensor with Class 0.2, testo 521-2 with an internal pressure sensor with Class 0.1. In the case of velocity speeds in the range from 1 to 12 m/s, you can carry out accurate measurements using the 100 Pa probe which can be attached externally. The measurement data can be saved according to location and analysed on your PC or printed on site on your Testo fast printer.

• Temp. compensated differential pressure sensor in instrument
• Additional 2 probe sockets for measuring pressure and temp.
• Direct calculation of velocity speed and volume flow
• Multi-point and timed mean calculation
• Density compensation
• Up to two 4 to 20 mA interfaces connectable to hand-held instr.
• 1 analog signal can be evaluated per interface
• Scaling of analog signal in hand-held instrument
• Transmitter can be supplied with power from testo 521, for example
• 4 to 20 mA interface can be connected to testo 521, 526, 400, 650 und 950 hand-held instruments
• Two user-defined probe inputs allow the connection of external probes for pressure, temperature, current/voltage

0560 5213 521-3 Differential Pressure Meter (0 to 2.5hPa) by Testo

Using testo 521-3 even the smallest differential pressures up to 250 Pa are measured. High accuracy and a resolution of 0.1 Pa mean the instrument is ideal for differential pressure measurements in clean rooms. When used with a Pitot tube, the internal pressure sensor measures flow speeds in the range 1 to 20 m/s.

• Temp. compensated differential pressure sensor built into instrument
• Calculation of velocity and volume flow via Pitot tube measurement
• Multi-point and timed mean calculation
• 2 probe sockets for pressure and temperature

0560 5280 526-1 Differential Pressure Meter (0 to 2000hPa/ 29psi, 0-1% acc.) by Testo

testo 526 is the differential pressure meter for industrial applications. Critical processes can be measured and monitored efficiently with an accuracy of up to 0.05% of the full-scale value.

• Temp. compensated differential pressure sensor, 0 to 2000 hPa, integrated in instrument
• Available in 2 accuracy classes: 0.1% / 0.05% of full-scale value
• Measures leakage rate (pressure drop per time)
• Checks drop in pressure in containers, cables etc. via the built-in test menu
• 2 probe sockets to connect additional probes for measuring pressure, temperature, current/voltage

0560 5281 526-2 Differential Pressure Meter (0 to 2000hPa/ 29psi, 0.05% acc.) by Testo

testo 526 is the differential pressure meter for industrial applications. Critical processes can be measured and monitored highly efficiently with an accuracy of up to 0.05% of the full-scale value.

• Temp. compensated differential pressure sensor 0 to 2000 hPa built into instrument
• Available in 2 accuracy classes: 0.1%/0.05% of full-scale value
• Measures leakage rate (drop in pressure per time)
• Checks drop in pressure in containers, cables etc. via the built-in test menu
• 2 probe sockets to connect additional probes for measuring pressure, temperature, current/voltage

0560 5350 535 Ambient CO2 Meter by Testo

testo 535, the efficient CO2 measuring instrument for measuring indoor air quality. Bad air quality in rooms can lead to tiredness, lack of concentration and illness (Sick Building Syndrome) due to high CO2 concentration (greater than 1000 ppm)

• Long-term monitoring based on maximum and mean calculation
• Long-term stable 2 channel infrared sensor
• Highly accurate, highly efficient
• Repeated calibration is unnecessary

0560 5522 01 552 Digital Vacuum / Micron Gauge with Bluetooth by Testo

The testo 552 digital micron gauge is ideal for monitoring the evacuation of air conditioning, refrigeration, and heat pump systems. It is rich in features that make your work faster, easier, and more accurate.

Precise deep vacuum measurements, measuring down to single digit resolutions use optimized Pirani sensors. The testo 552 has real time calculations for the saturation temperature of water, which determines the proper micron/temperature levels at which moisture is removed from the system. These internal calculations inform you when/if the pressure is low enough to meet your evacuation target. This saves time and provides you with the assurance that the system is now free from moisture and contaminants. User defined alarm points alert you when target values are reached.

The new testo 552 with Bluetooth links to your smart phone or device. The testo 552 uses the free testo SMART Probes App which is a powerful and easy-to-use tool. It allows you to remotely read measurements of 1 to 6 Smart Probes including the testo 552. You can easily document / report the results.

• Precise and reliable vacuum measurements, 1 micron resolution
• Displays the saturation temperature of H2O to ensure full and proper evacuation
• Illuminated, backlit display with visual alarm for evacuation pressure
• Wireless Bluetooth communication to smart phone or tablet provides powerful analysis and reporting
• Display data, create reports, and send via email or SMS

0560 5600 01 Refrigerant valve with Bluetooth - for digital refrigerant scale testo 560i by Testo

Fully automatic and precise charging of refrigeration systems and heat pumps: The intelligent refrigerant valve makes it possible - together with the separately available testo 560i refrigerant scale, a Testo manifold, Testo Smart Probes and the testo Smart App.

• Intelligent Bluetooth valve for digital refrigerant scale testo 560i (available separately or as a kit) for automatic and precise refrigerant charging of refrigeration systems/heat pumps.
• Easy operation via Testo manifold or testo Smart App with automatic charging programs according to target value superheat, subcooling or refrigerant weight.
• Flexible in confined environments: Valve and scale automatically connect via Bluetooth to the manifold and App on your smartphone/tablet.
• All measured values for the charging process at a glance in the manifold and App with storage of the measured data in the App.
• Compatible with testo 560i, manifolds testo 557s/550s/550i as well as testo 557 /550, Smart Probes testo 115i/549 i/605i and testo Smart App for Android and iOS.

Advantages of the refrigerant valve

• Especially robust thanks to IP54
• High Bluetooth range of up to 150 m together with a Testo manifold (alone up to 50 m).
• Long battery life of over 60 hours and replaceable 9 V block battery.
• Very practical due to sturdy hook.

Delivery Scope

• Refrigerant valve with Bluetooth for digital refrigerant scale testo 560i
• 1 x 9V (6LR61) battery
• Instruction manual

0560 6053 605-H1 Humidity Stick with Dew Point by Testo

The thermohygrmeter you can bend. Small, compact and accurate. The long-term stable sensor guarantees correct measurement results even after years.

• Dewpoint calculation from -20 to +50 °Ctd
• Long-term stable Testo humidity sensor
• Ideal for measurements in ducts
• Display can be angled for easy readout of measurement values
• Air moisture, air temperature and dew point

0560 6054 605-H2 Humidity Stick with Wet Bulb by Testo

The thermohygrmeter you can bend. Small, compact and accurate. The long-term stable sensor guarantees correct measurement results even after years.

• Dewpoint calculation from -20 to +50 °Ctd
• Long-term stable Testo humidity sensor
• Ideal for measurements in ducts
• Display can be angled for easy readout of measurement values
• Air moisture, air temperature and dew point

0560 6060 606-1 Pocket PRO Moisture Meter by Testo

testo 606-1 measures material moisture. Material moisture is displayed in percent by weight using stored material characteristic curves for wood and building materials.

• Accurate wood moisture measurement with stored characteristic curves for beech, spruce, larch, oak, pine, maple
• Additional characteristic curves to locate wet points in building materials for cement screed, concrete, plaster, anhydrite screed, cement mortar, lime mortar, brick
• Hold function for easy readout of readings
• Display illumination
• Self-test function
• Protective cap for safe storage
• Belt case, wrist strap and calibration protocol included

0560 6062 606-2 Pocket PRO Moisture Meter with RH & Temperature by Testo

In addition to material moisture, testo 606-2 also measures air moisture and temperature. In this way, drying conditions can be reliably assessed directly on-site

• Precise measurement of wood moisture with stored characteristics curves for beech, spruce, larch, oak, pine, maple
• Additional characterisitic curves for cement screed, concrete, plaster, anhydrite screed, cement mortar, lime mortar, brick
• Hold function for easy readout of readings
• Display illumination
• Self-test function
• Protective cap for safe storage
• Including wrist strap and belt holder
• Measurement of temperature and humidity in ambient air
• Air humidity measurement with the long-term stable Testo humidity sensor
• Incl. dewpoint calculation and wet bulb

0560 6081 608-H1 Large Display Temperature & RH Meter with Min/Max Display by Testo

The affordable standard testo 608-H1 hygrometer measures humidity, temperature and dewpoint non-stop. The efficient testo 608-H2 alarm hygrometer with LED alarm function for accurate signals when limits are exceeded.

• With dew point calculation td and max/min display
• Humidity sensor is not affected by condensation
• Battery monitoring

0560 6160 616 Wood/Material Moisture Meter (non-penetration) by Testo

The testo 616 allows fast and non-destructive observation of the material moisture of woods and building materials. This allows the ideal time and place for any destructive measurement which may be necessary to be determined. The display is in percent by weight in comparison to the dry mass of the material. The testo 616 makes work easier for all those who need to observe the development of drying in floors, walls and surfaces.

• Equipped with 10 characteristics curves for soft wood, hard wood, chipboard, anhydrite screed, cement screed, lime sand brick, aerated concrete, concrete, vertical hole brick and solid brick
• Measurement depth up to 5 cm
• Handy shape for optimum contact pressure
• Hold, max., min. function
• Illuminated digital display
• Characteristics curves were developed in cooperation with the LPI institut
• Advantageous for measurements on exotic woods: non-destructive determination of wood moisture

0560 6220 622 Hygrometer with Pressure Indicator by Testo

In addition to temperature and humidity, the testo 622 also measures pressure. In the large, clear display, it shows the current measurement values as well as the date and time. It thus provides all important values at a glance.

• Hanging and standing bracket allows felxible positioning on a wall or desktop
• Large, optimally legible display
• Precise measurement of temperature, humidity and pressure
• All important values at a glance: current measurement values as well as date and time
• Calibration and adjustment of the measuring instrument possible on site with the optional calibration and adjustment software
• Adjustable calibration reminder function