Testo

0560 0510 510 Pocket Pro Pressure Meter with Air Velocity by Testo

The differential pressure meter is ideally suitable for pressure measurements in the range 0 to 100 hPa. testo 510's differential pressure measurement is temperature-compensated for accurate readings. Readings can be displayed in Pascal over the whole measurement range. Magnets at the back of the instrument enable hands-free operation, for instance, while adjusting gas heaters.

• Display in Pascal possible over entire measurement range
• Accuracy: ±0.03 hPa (0 to 0.30 hPa) / ±0.05 hPa (0.31 to 1.00 hPa)
• Temperature compensation
• Magnetic rear permits free-hand work
• Flow velocity measurement with Pitot tube (Pitot tube not included in delivery)
• Air density compensation
• Protective cap for safe storage
• Including wrist strap and belt holder
• Backlit display
• Switchable units: hPa, mbar, Pa mmH2O, mmHg, inH2O, inHg, psi, m/s, fpm

0560 0511 511 Pocket Pro Absolute Pressure & Altitude Meter by Testo

testo 511 measures absolute pressure with an accuracy of +/-3 hPa. It is converted to barometric air pressure by entering on-site height above sea level. In addition, barometric elevation measurement between two points is also possible.

• Measures absolute pressure, e.g. for absolute pressure compensation in flow velocity measurements with a Pitot tube
• Calculation of barometric air pressure
• Barometric altitude measurement
• Accuracy +/-3 hPa
• Protective cap for safe storage
• Including wrist strap and belt holder
• Backlit display
• 8 switchable pressure units: hPa, mbar, Pa, mmH2O, mmHg, inH2O, inHg, psi

0560 0540 540 Pocket Pro Light Meter by Testo

The sensor of the testo 540 is adapted to the spectral sensitivity of the eye. This makes testo ideal for the measurement of light intensity. The Hold function allows an easy readout of the measurement values. Max. and min. values are displayed at the press of a button. testo 540 is very handy, small and easy to operate.

• Hold function and max./min. values
• Incl. calibration protocol
• Protective cap for safe storage
• Including wrist strap and belt holder
• Sensor adapted to spectral sensitivity of the eye
• Display light

0560 0545 545 Light Meter / Logger by Testo

In order to have good quality light, luminous intensity in the workplace, hospitals, offices or schools has to fulfill specific minimum guidelines. This can be checked using testo 545.

• Multi-point or timed mean calculation
• Stores up to 99 file locations
• Logger function (3000 readings)
• Fast documentation on site on the Testo printer

0560 0810 810 Pocket Pro IR and Ambient Thermometer by Testo

The testo 810 is a handy temperature measuring instrument which measures air temperature, and simultaneously surface temperature by infrared. For example, the temperature of a radiator, an air outlet or a window can be easily and conveniently compared to the air temperature in the room. The difference between air and surface temperature is automatically displayed.

Thanks to its handy design, the testo 810 is quickly to hand and easy to stow, for example in a trouser pocket. The infrared measurement is carried out with a 1-point laser measurement spot marking and 6:1 optics. The emissivity can be individually set depending on the application, and with the help of the min./max. function, the minimum and maximum values are shown in the display.

• Measure air temperature and non-contact surface temperature with one instrument
• Infrared measurement with 1-point laser spot marking and 6:1 optics
• Display of differential temperature, e.g. between window and air
• Hold function and min./max. values
• Display illumination
• Incl. calibration protocol
• Protective cap for safe storage
• Incl. wrist strap and belt holder
• Emissivity adjustable
• Display of difference between air and surface temperature

0560 0882 70 882 Thermal Imager Kit by Testo

With the thermal imager testo 882, you test materials and components reliably and securely. The testo 882 in ergonomic pistol design stands out thanks to very high-resolution thermal images and a high thermal sensitivity. This allows you to identify every detail on the measurement object completely non-intrusively, and detect anomalies and weak spots more easily even at a great distance. For you, that means: You see more and have more security when measuring thermographically!

• Detector size 320 x 240 pixels: With 76.800 temperature measurement points, the measurement objects are detected in excellent image quality, very clearly and precisely.
• Super Resolution technology to 320 x 240 pixels: Super Resolution technology improves the image quality by one class, i.e. the resolution of the thermal images is four times higher.
• Thermal sensitivity < 60 mK: Thanks to an excellent temperature resolution of < 60 mK, even the smallest temperature differences are visible.
• Large field of view thanks to 32° lens: With the lightweight 32° wide-angle lens, large image sections are immediately recognized, and the temperature distribution of the measurement object recorded at a glance.
• Solar mode: For each measurement, the sun irradiation value can be entered into the camera. This value is stored for each thermal image
• Special measurement mode for detecting areas with danger of mould: Using the externally measured ambient temperature and air humidity, as well as the surface temperature, the humidity value of each measurement point is caculated and shown in the display as areal humidity image.
• High temperature up to 550°C: With the high temperature option, the measuring range can be flexibly extended up to 550°C.
• Integrated digital camera: Power LED's
• Voice recording using headset
• Intuitive operation

The thermal imager testo 882 is delivered in a robust case incl.

• Pro software
• Soft-Case
• Carrying strap
• SD card
• USB cable
• Mains unit
• Li-ion rechargeable battery
• Adapter for tripod mounting
• Lens protection glass
• Headset

0560 1040 01 104-IR Folding, Waterproof Thermometer by Testo

The testo 104-IR is a waterproof (IP65) penetration thermometer combined with an infrared sensor for non-contact temperature measurement. It can be used for various applications in the food sector. The precise testo 104-IR scans the surface temperature of individual foods or entire pallets from a distance. If a limit value is exceeded or undershot, the hinged penetration probe is also able to measure the core temperature.

The penetration probe is always securely stowed on the instrument itself. As soon as the probe is opened up, the display is activated, and the IR measurement starts at the touch of a button. Thanks to the large display, it is easy to read the measurement result.

Its few buttons are ergonomically placed and user friendly. No time-consuming measurements, no complicated handling, no compromises. For quick, accurate and convenient temperature measurements anywhere at anytime, the 104-IR thermometer is unmatched in value and quality.

• One product, two purposes: Infrared and penetration thermometer
• Robust yet compact design with durable folding joint
• Precise 2-point laser with 10:1 optics displays the exact measuring range and guarantees error-free measurements
• Waterproof (IP65) and HACCP-compliant

Includes:

testo 104-IR waterproof folding food thermometer, user guide, calibration protocol, adhesive color strips, batteries

0560 1063 106 Food Thermometer by Testo

The core thermometer testo 106 with a thin, robust measuring tip, excellently suited for fast core temperature monitoring in gastronomy, in hotels, large kitchens, supermarkets etc.

• Audible and optical alarm (LED lights up)
• TopSafe (optionally or in a set), waterproof and dishwasher-safe protective case (IP 67)
• Fast measurement (2 measurements per second)
• Almost invisible penetration hole due to special food probe
• Small, handy and always close to hand
• Automatic recognition of final value (Auto-Hold)

0560 1109 Mini Surface Thermometer by Testo

Affordable. The surface thermometer has a widened measuring tip making it particularly suitable for surface measurements.

• Perfect for checking surface temperatures
• Extra wide measuring tip for placing on a flat measuring point
• Measurement of high temperatures up to +300 °C
• Many areas of application: heating engineering, sanitation sector, and air conditioning/ventilation/refrigeration technology

Includes:

Mini surface thermometer including batteries.

0560 1110 Standard Mini Penetration Thermometer by Testo

The quick-action immersion/penetration thermometer is ideal for measuring the temperature in air, soft or powdery substances and liquids.

• Large, easy-to-read display
• Battery level display
• Switchover from °C to °F at the touch of a button
• Measurements from -50 to +150 °C

Includes:

Mini penetration thermometer, including protective tube with integrated clip, batteries and calibration protocol.

0560 1111 Mini Penetration Thermometer with Extended Probe by Testo

The quick-action immersion/penetration thermometer is ideal for measuring the temperature in air, soft or powdery substances and liquids.

• Universally applicable
• The longer measurement tip of 213 mm is suitable for measurements in which the object is difficult to reach
• For measurement points which are very hot (from -50 to +250 °C)
• Discounts for larger order quantities

Includes:

Mini penetration thermometer with extended penetration probe, including protective tube with integrated clip, batteries and calibration protocol.

0560 1113 Mini Waterproof Penetration Thermometer by Testo

Low in price, high in performance: the waterproof mini probe thermometer measures the core temperature of liquid, soft and powdery media as well as the ambient air temperature.

And when you're done, you can either clean your mini probe thermometer under running water or pop it into the dishwasher before returning it to the protective case that comes with the delivery. The mini probe thermometer also has an integrated clip to stop it from slipping out of your shirt or jacket pocket.

A variety of different applications for the waterproof mini probe thermometer

From checking the Sunday roast (but don't leave it in the oven!) to carrying out temperature checks during production processes; from measuring the air temperature in a/c units to checking the temperature of different media in garden centers or laboratories. The mini probe thermometer measures the air and the core temperature and is ideal for use in a variety of applications and environments.

• For quick 'n easy air and core temperature measurements
• Waterproof / dishwasher safe (IP67 rated)
• Ideal for a variety of different applications in kitchens / laboratories / industrial settings / garden centers
• Includes protective case / integrated clip

Includes:

Waterproof mini probe thermometer, protective case, integrated clip.

0560 1115 01 115i Pipe-clamp Thermometer Wireless Smart Probe by Testo

The testo 115i Smart Probe is a pipe-clamp probe that measures temperature in pipes more accurately than thermocouples because of the superior NTC temperature sensor technology. The exclusive Testo probe design grips pipes up to 1.5" and maintains critical contact between probe and pipe surface to derive the best readings. Users can read the measurements using the testo Smart Probes App installed on their smart device. The testo 115i works on smart devices with either Android or Apple operating systems at distances up to 60'.

The testo Smart Probes App is a powerful and easy-touse tool. It allows you to remotely read measurements from up to six (6) Smart Probes and easily document/report the results. Automatic calculations make it a snap! All measurement data is displayed as instrument readings, tables, or graphs. The measurements can be quickly saved as PDF or Excel files. The App creates custom reports which can be saved and/or shared by email. All your data can be stored and retrieved saving you hours of time consuming paperwork!

• Measures temperature of pipes in heating and cooling systems
• Use with testo 549i Refrigeration Pressure Probe to calculate superheat and sub-cooling
• Quickly identify temperature changes by monitoring realtime trending and data logging
• 115i NTC temperature sensor is more accurate and stable than thermocouples
• Measurement data is transmitted to the convenient and powerful testo Smart Probes App in your smart device
• Tough, accurate, and easy-to-use
• For all HVAC/R technicians and contractors

0560 1405 01 405i Hot-wire Anemometer Wireless Smart Probe by Testo

The testo 405i Smart Probe hot-wire anemometer is a wireless instrument for measuring air flow velocity, temperature, and volume flow. It is equipped with a telescopic shaft which extends to 15" for easy in-duct testing. You can reliably determine timed and multipoint flow traverses. Users can read the measurements using the testo Smart Probes App installed on their smart device. The app lets users configure duct dimensions to calculate volume flow measurements. Use the testo 405i along with the testo 605i thermo-hygrometer to determine cooling and heating performance. The testo 405i works on smart devices with either Android or Apple operating systems.

The testo Smart Probes App is a powerful and easy-touse tool. It allows you to remotely read measurements from up to six (6) Smart Probes and easily document/report the results. Automatic calculations make it a snap! All measurement data is displayed as instrument readings, tables, or graphs. The measurements can be quickly saved as PDF or Excel files. The App creates custom reports which can be saved and/or shared by email. All your data can be stored and retrieved saving you hours of time consuming paperwork!

• Measures air velocity, volume flow, and temperature
• Measures in-duct air flow and automatically calculates volume flow (enter duct dimensions simply)
• Small dia. (<0.5") and 15" telescopic shaft length is ideal for in-duct flow averaging and timed traverse
• Perform air duct leakage tests
• Measurement data is transmitted to the convenient and powerful testo Smart Probes App in your smart device
• Tough, accurate, and easy-to-use
• For all HVAC/R technicians and contractors

0560 1410 01 410i Vane Anemometer Wireless Smart Probe by Testo

The testo 410i Smart Probe is a compact wireless vane anemometer for measuring air velocity, and temperature and deriving volume flow. It is used at air outlets, and for monitoring the air flow of ventilation systems. Users can read the measurements using the testo Smart Probes App installed on their smart device. It is easy to configure volume flow measurements and to reliably run timed multipoint averaging traverses. It is especially useful for balancing multi-outlet ventilation systems by using several instruments. The testo 410i works on smart devices with either Android or Apple operating systems.

The testo Smart Probes App is a powerful and easy-touse tool. It allows you to remotely read measurements from up to six (6) Smart Probes and easily document/report the results. Automatic calculations make it a snap! All measurement data is displayed as instrument readings, tables, or graphs. The measurements can be quickly saved as PDF or Excel files. The App creates custom reports which can be saved and/or shared by email. All your data can be stored and retrieved saving you hours of time consuming paperwork!

• Measures air velocity, volume flow, and temperature
• No air density correction required due to design
• Measures air flow at registers and automatically calculates volume flow (enter duct dimensions simply)
• Measure volume flow at several outlets simultaneously (using mutiple Smart Probes) to adjust system balance
• Timed/multipoint averaging to get accurate air flow profiles
• Measurement data is transmitted to the convenient and powerful testo Smart Probes App in your smart device
• Tough, accurate, and easy-to-use
• For all HVAC/R technicians and contractors

0560 1549 01 549i Refrigeration Pressure Wireless Smart Probe by Testo

The testo 549i Smart Probe is a hose-less, wire-less, pressure probe for measuring refrigerant charge in AC/Refrigeration systems. It is used for servicing, troubleshooting, and documenting the operation of residential or commercial AC/refrigeration systems. When two 549i are used in conjunction with two 115i pipe-clamp temperature probes it is easy to monitor superheat and sub-cooling in AC/refrigeration systems. Users can read the measurements using the testo Smart Probes App installed on their smart device. The testo 549i easily connects to standard Schrader valves without tools and without hoses, eliminating any refrigerant loss. The testo 549i works on smart devices with either Android or Apple operating systems at distances up to 60'.

The testo Smart Probes App is a powerful and easy-touse tool. It allows you to remotely read measurements from up to six (6) Smart Probes and easily document/report the results. Automatic calculations make it a snap! All measurement data is displayed as instrument readings, tables, or graphs. The measurements can be quickly saved as PDF or Excel files. The App creates custom reports which can be saved and/or shared by email. All your data can be stored and retrieved saving you hours of time consuming paperwork!

• Measures high-side or low-side refrigerant pressure (or both simultaneously with 2 probes) in AC/refrigeration systems
• No hoses required! Clean, simple, accurate.
• Low-loss refrigerant pressure testing!
• Use with 115i pipe-clamp temperature probes for automatic superheat / sub-cooling calculations
• Measurement data is transmitted to the convenient and powerful testo Smart Probes App in your smart device
• Tough, accurate, and easy-to-use.
• For all HVAC/R technicians and contractors

0560 1605 01 605i Humidity Smart Probe by Testo

The testo 605i Smart Probe thermo-hygrometer is a humidity and temperature measuring instrument that quickly and accurately measures relative humidity, dew point, and temperature in rooms, ducts, registers, and environmental boxes/chambers. Users can read the measurements using the testo Smart Probes App installed on their smart device. Smart Probes can be used individually or combined with other Smart Probes to create measuring solutions for most HVAC/R applications. Great for setup and diagnostics of large and small HVAC/R systems!

The testo 605i works on smart devices with either Android or Apple operating systems.

The testo Smart Probes App is a powerful and easy-touse tool. It allows you to remotely read measurements from up to six (6) Smart Probes and easily document/report the results. Automatic calculations make it a snap!

All measurement data is displayed as instrument readings, tables, or graphs. The measurements can be quickly saved as PDF or Excel files. The App creates custom reports which can be saved and/or shared by email. All your data can be stored and retrieved saving you hours of time consuming paperwork!

• Quickly and accurately measures relative humidity and temperature in rooms, ducts, and chambers
• Automatically calculates dew point & wet bulb temperature
• Small diameter probe is ideal for in-duct measurements
• Measurement data is transmitted to the convenient and powerful testo Smart Probes App in your smart device
• Tough, accurate, and easy-to-use
• For all HVAC/R technicians and contractors

0560 1905 01 905i Thermometer Smart Probe by Testo

The testo 905i Smart Probe is an air temperature Smart Probe that quickly and accurately measures temperature in rooms, ducts, registers, and environmental boxes/chambers. Users can remotely read the measurements from this or multiple probes by using the testo Smart Probes App installed on their Smart device. Smart Probes can be used individually or in combination with other Smart Probes to create measuring solutions for most HVAC/R applications. Great for setup and diagnostics of large and small HVAC/R systems. The testo 905i works on smart devices with either Android or Apple operating systems.

The testo Smart Probes App is a powerful and easy-touse tool. It allows you to remotely read measurements from up to six (6) Smart Probes and easily document/report the results. Automatic calculations make it a snap!

All measurement data is displayed as instrument readings, tables, or graphs. The measurements can be quickly saved as PDF or Excel files. The App creates custom reports which can be saved and/or shared by email. All your data can be stored and retrieved saving you hours of time consuming paperwork!

• Quickly and accurately measures air temperature in rooms, ducts, registers, and outlets
• Fast acting temperature probe quickly tracks changes and shows trends on a graphic display
• Measurement data is transmitted to the convenient and powerful testo Smart Probes App in your smart device
• Tough, accurate, and easy-to-use
• For all HVAC/R technicians and contractors

0560 2304 230 pH Meter by Testo

The testo 230 combines a complete pH measuring instrument and a full-value temperature measuring instrument in one compact splashproof housing. It reliably records pH values, reduction voltages and temperature in watery solutions as well as in semi-solid to solid media.

The instrument has an automatic temperature compensation, and can be calibrated with standard as well as DIN buffers in the pH area. Thanks to the possibility of connecting different pH probes, the testo 230 is universally applicable, not only for applications in the pharmaceutical industry, but also in the food sector and the field of HVAC.

• Measurement of pH and temperature in one instrument
• Display of calibration data and error reports
• Robust and splashproof according to protection class IP54
• Easily legible, 2-line display
• 1, 2, or 3-point calibration possible

0560 2605 03 605i Thermohygrometer Smart Probe 350 ft Bluetooth range by Testo

The testo 605i Smart Probe thermo-hygrometer is a humidity and temperature measuring instrument that quickly and accurately measures relative humidity, dew point, and temperature in rooms, ducts, registers, and environmental boxes/chambers. Users can read the measurements using the testo Smart Probes App installed on their smart device. Smart Probes can be used individually or combined with other Smart Probes to create measuring solutions for most HVAC/R applications. Great for setup and diagnostics of large and small HVAC/R systems!

The testo 605i works on smart devices with either Android or Apple operating systems.

The testo Smart Probes App is a powerful and easy-touse tool. It allows you to remotely read measurements from up to six (6) Smart Probes and easily document/report the results. Automatic calculations make it a snap!

All measurement data is displayed as instrument readings, tables, or graphs. The measurements can be quickly saved as PDF or Excel files. The App creates custom reports which can be saved and/or shared by email. All your data can be stored and retrieved saving you hours of time consuming paperwork!

• Quickly and accurately measures relative humidity and temperature in rooms, ducts, and chambers
• Automatically calculates dew point & wet bulb temperature
• Probe now foldable to 90°
• Bluetooth range of up to 350 feet
• Small diameter probe is ideal for in-duct measurements
• Tough, accurate, and easy-to-use
• For all HVAC/R technicians and contractors

0560 3162 316-1 Gas Leak Detector with Flexible Probe by Testo

If you like to keep things simple, we recommend the testo 316-1 gas leak detector: Identifying and locating leaks or even reading off concentration values in ppm or %LEL (lower explosive limits) are all exceptionally easy. No training required thanks to the intuitive traffic-light scale on the head and the display illumination.

The testo 316-1 gas leak detector makes it particularly easy to identify and locate leaks. The multicolor LED on the sensor head and the multicolor display, as well as the flexible probe for hard-to-reach places, support you intuitively and precisely in leak detection.

• Acoustic and visual alarm via multi-color LED on the sensor head
• Display of ppm / vol% / %LEL on the instrument
• Sensor self-test and automatic zeroing
• Flexible probe for locations that are difficult to access

0560 4053 405-V1 Thermo-Anemometer (metric only) by Testo

testo 405 is a thermal anemometer with a telescopic handle (max. extension length: 300 mm). It facilitates the measurement of air flow, volume flow and temperature.

• Volume flow calculation up to 99,990 m3/h
• Temperature measurement
• Ideal for measurements in ducts
• Easy-to-read readings thanks to swivel display
• Telescopic handle to 300 mm
• Sensor protected by rotatable protection cap, 300 mm long telescopic handle

0560 4102 410-2 Pocket Pro Air Velocity, Temperature & RH Meter by Testo

testo 410-2 is designed for the measurement of air flow velocity, temperature and humidity. Testo's own patented humidity sensor guarantees reliable measurement results. Thanks to the integrated measurement with the 40 mm vane, it is ideally suited for fast spot checks at air vents. A timed mean value calculation is possible. The measuring instrument is very handy, small and easy to operate.

• Flow velocity measuring instrument with temperature measurement
• Integrated measurement with 40 mm vane
• Timed mean value calculation
• Hold function and max./min. values
• Windchill calculation for outside areas (perceived temperature)
• Display illumination
• Protective cap for safe storage
• Including wrist strap and belt holder
• Air humidity measurement with long-term stable Testo humidity sensor
• Incl. dewpoint calculation and wet bulb
• Incl. calibration protocol

0560 4160 410-2 Pocket Pro Air Velocity, Temp & RH Meter by Testo

The compact testo 416 anemometer with permanently attached vane probe with telescopic handle (max. 890mm). Volume flow is shown directly in the display. Accurate volume flow calculation due to easy input of duct area. Timed and multi-point mean calculation provide information on mean volume flow. Min/max values can also be shown in the display. The Hold function enables you to freeze the current reading in the display.

• Direct display of volume flow
• Multi-point or timed mean calculation
• Max/min values
• Hold button to freeze readings
• Display light
• Auto-Off function
• TopSafe, the indestructible protective case (optional)
• TopSafe, instrument protection against dirt and knocks (optional)