Agrowtek

GrowControl™ MDX5 Dosing Panel (penta pump, B size panel) by Agrowtek

MDXP Modular Dosing Panels automate nutrient dosing and pH control (+ORP) in large or small nutrient stock tanks for re-circulating or drain-to-waste fertigation systems. These pre-assembled panels come ready to dose! Just connect the water manifold to your system and plug in power! Controller, dosing pumps and water manifold are all conveniently mounted on a stainless steel back panel simplifying installation and providing a clean appearance. Available in 1, 2, 4 or 5 pump configurations. Each pump can be configured for pH up/down, EC nutrient dosing or ORP as required. SXH hydro sensor with LCD display allows advanced configuration of the pumps and dosing parameters, manual pump priming, as well as graphing, alarms, data logging and more in a simple to use menu interface. Monitor remotely from any web browser and send email alerts with the optional WiFi module.

AgrowDose peristaltic pumps have legendary reliability, are self-priming, draw over 10ft of lift and pump into lines up to 25psi (up to 45psi with high-pressure check-valve kit.) Pumps feature easy-maintenance with no-tool, twist-off replaceable heads. Stainless steel back-panel makes installation as simple as hanging on a wall and connecting plumbing.

GrowControl™ MPX1 Mini Dosing System (single pump) by Agrowtek

GrowControl MPX Mini Dosing System automates pH dosing by combining Agrowtek's digital PHX pH controller with AgrowDose precision dosing pumps. MPX+ model includes ORP. Each pump can be configured independently.

PHX dosing controller with lcd display allows advanced configuration of the pumps and dosing parameters, manual pump priming, as well as graphing, alarms, data logging and more.

GrowControl™ MPX1 Dosing Panel (single pump, A size panel) by Agrowtek

MPXP Modular Dosing Panels automate pH and ORP control in large or small tanks for re-circulating or drain-to-waste fertigation systems, DWC buckets, aquaponics, aquariums, pools, and other general industrial/commercial processes. These pre-assembled panels come ready to dose! Just connect the water manifold to a circulation pump and plug in power! Controller, dosing pumps and water manifold are all conveniently mounted on a stainless steel back panel simplifying installation and providing a clean appearance. Available with single, dual or quad metering pump. Each pump can be configured for ORP or pH up/down dosing with independent dose sizes. PHX pH controller with LCD display allows advanced configuration of the pumps and dosing parameters, manual pump priming, as well as graphing, alarms, data logging and more in a simple to use menu interface. Monitor remotely from any web browser and send email alerts with the optional WiFi module.

GrowControl™ MPX2 Mini Dosing System (dual pump) by Agrowtek

GrowControl MPX Mini Dosing System automates pH dosing by combining Agrowtek's digital PHX pH controller with AgrowDose precision dosing pumps. MPX+ model includes ORP. Each pump can be configured independently.

PHX dosing controller with lcd display allows advanced configuration of the pumps and dosing parameters, manual pump priming, as well as graphing, alarms, data logging and more.

GrowControl™ MPX4 Mini Dosing System (quad pump) by Agrowtek

GrowControl MPX Mini Dosing System automates pH dosing by combining Agrowtek's digital PHX pH controller with AgrowDose precision dosing pumps. MPX+ model includes ORP. Each pump can be configured independently.

PHX dosing controller with lcd display allows advanced configuration of the pumps and dosing parameters, manual pump priming, as well as graphing, alarms, data logging and more.

GrowControl™ MPX4 Dosing Panel (dual pump, A size panel) by Agrowtek

MPXP Modular Dosing Panels automate pH and ORP control in large or small tanks for re-circulating or drain-to-waste fertigation systems, DWC buckets, aquaponics, aquariums, pools, and other general industrial/commercial processes. These pre-assembled panels come ready to dose! Just connect the water manifold to a circulation pump and plug in power! Controller, dosing pumps and water manifold are all conveniently mounted on a stainless steel back panel simplifying installation and providing a clean appearance. Available with single, dual or quad metering pump. Each pump can be configured for ORP or pH up/down dosing with independent dose sizes. PHX pH controller with LCD display allows advanced configuration of the pumps and dosing parameters, manual pump priming, as well as graphing, alarms, data logging and more in a simple to use menu interface. Monitor remotely from any web browser and send email alerts with the optional WiFi module.

MX1D DC Reversible Motor Controller by Agrowtek

MX1 forward/reverse motor controllers allows Agrowtek's GC-Pro/XL control systems to directly operate AC or DC vent and shade motors up to 8Amps or 3/4HP.

Control opening and closing of vents and curtains with automatic control by wiring the MX1's input signal terminals to Agrowtek's controller outputs, or use the knob on the front of the MX1 to manually operate vent and curtain motors.

Operates on 24VDC and includes manual override switch for manual or automatic operation.

Includes terminals for external limit switches and piggy-back connection of multiple units from a single hard-wired 24Vdc power supply.

Specifications

• 24Vdc control signals (compatible with Agrowtek systems)
• 120V AC-to-DC wall adapter included
• MX1: 120VAC 8A / 3/4 HP rating
• MX1D: 30VDC 8A / 3/4 HP rating
• Polymer weather-resistant enclosure
• 2 Year Warranty

Applications

• Greenhouses & Growing Facilities
• Building Automation
• Industrial Automation
• OEM & Custom Applications

MX1i DC Digital Intelligent Motor Relay, 30Vdc, 8A by Agrowtek

Tough and intelligent reversable motor controller for AC or DC motors. Control motors up to 8A/120V. Designed for control of ridge vent, roll-up and shade cloth gear motors.

Selector knob on front of relay allows automatic operation, manual operation or off mode. Red LED indicator lights turn on when forward or reverse relays are activated. Built-in 3-second delay prevents accidental damage to motors. Internal memory logs the life cycle count on each relay. Includes standard 1/2" EMT knock-outs for conduit installation.

Digital GrowNET port allows MODBUS protocol control on RS485 bus networks for custom applications.

Made in USA.

PBX-102 2-Port Chemical Injection Manifold by Agrowtek

PBX-104 is a simple multi-port manifold for connecting Agrow-Dose peristaltic dosing pumps into a recirculating sample loop for injecting chemicals such as nutrients or pH buffers.

The PBX-100 series injection manifolds are often combined with a PBX-210, PBX-310, or PBX-410 sensor probe manifold for sampling of the solution prior to the injection point.

PBX-104 4-Port Chemical Injection Manifold by Agrowtek

PBX-104 is a simple multi-port manifold for connecting Agrow-Dose peristaltic dosing pumps into a recirculating sample loop for injecting chemicals such as nutrients or pH buffers.

The PBX-100 series injection manifolds are often combined with a PBX-210, PBX-310, or PBX-410 sensor probe manifold for sampling of the solution prior to the injection point.

PBX-105 5-Port Chemical Injection Manifold by Agrowtek

PBX-104 is a simple multi-port manifold for connecting Agrow-Dose peristaltic dosing pumps into a recirculating sample loop for injecting chemicals such as nutrients or pH buffers.

The PBX-100 series injection manifolds are often combined with a PBX-210, PBX-310, or PBX-410 sensor probe manifold for sampling of the solution prior to the injection point.

PBX-210 2-Port Sensor Manifold by Agrowtek

PBX sensor manifolds integrate water-tight gland fittings into a 1" PVC manifold for sensing pH, conductivy, ORP and water temperature inline with a recirculating pump. Compression glands have a rubber insert that clamps around the probes when tightened. Manifolds make it easy to install and remove probes for calibration and maintenance.

Available in 2, 3 or 4 port configurations. Max: 60psi, 30gpm.

PBX-310 3-Port Sensor Manifold by Agrowtek

PBX sensor manifolds integrate water-tight gland fittings into a 1" PVC manifold for sensing pH, conductivy, ORP and water temperature inline with a recirculating pump. Compression glands have a rubber insert that clamps around the probes when tightened. Manifolds make it easy to install and remove probes for calibration and maintenance.

Available in 2, 3 or 4 port configurations. Max: 60psi, 30gpm.

PBX-410 4-Port Sensor Manifold by Agrowtek

PBX sensor manifolds integrate water-tight gland fittings into a 1" PVC manifold for sensing pH, conductivy, ORP and water temperature inline with a recirculating pump. Compression glands have a rubber insert that clamps around the probes when tightened. Manifolds make it easy to install and remove probes for calibration and maintenance.

Available in 2, 3 or 4 port configurations. Max: 60psi, 30gpm.

GrowControl™ PHX pH, Temp Transmitter by Agrowtek

GrowControl PHX and PHX+ are precision digital sensor transmitters for temperature and pH, plus optional ORP. Color LCD display and button interface model allows instant access to sensor readings, guided calibration, alarms, historical graphing and more.

Internal memory logs over 20,000 data points per sensor. Connects to Agrowtek's GrowControl Cultivation Controllers as part of a complete facility control solution. Available with WiFi module for stand-alone or remote monitoring, data logging, alerts, and more.

LX1 USB AgrowLink connects the GrowNET™ port to a PC with free PC software for datalog download, graphing, calibration, configuration, firmware updates, etc. LX2 ModLINK connects GrowNET™ devices to RS-422/485 for MODBUS RTU protocol communication.

Sensors

• Water Temperature: -20 - 60°C x 0.1°
• Conductivity: 0 - 5000uS x 10uS
• pH: 0 - 14pH x 0.01pH
• Color LCD display for sensor monitoring & graphing optional
• Real Time Clock (RTC): Battery Backup Included

Features

• WiFi optional for direct sensor monitoring and web portal connection
• GrowNET™ port for connection to AgrowDose Pumps, LX1 USB link or LX2 ModLINK
• MODBUS RTU for industrial PLC applications: Available 4-20mA analog outputs
• Durable splash-proof ABS plastic enclosure: Conformal coated circuit boards
• 1-Year Warranty
• Made in USA

GrowControl™ PHXM pH, Temp Transmitter by Agrowtek

GrowControl PHX and PHX+ are precision digital sensor transmitters for temperature and pH, plus optional ORP. Color LCD display and button interface model allows instant access to sensor readings, guided calibration, alarms, historical graphing and more.

Internal memory logs over 20,000 data points per sensor. Connects to Agrowtek's GrowControl Cultivation Controllers as part of a complete facility control solution. Available with WiFi module for stand-alone or remote monitoring, data logging, alerts, and more.

LX1 USB AgrowLink connects the GrowNET™ port to a PC with free PC software for datalog download, graphing, calibration, configuration, firmware updates, etc. LX2 ModLINK connects GrowNET™ devices to RS-422/485 for MODBUS RTU protocol communication.

Sensors

• Water Temperature: -20 - 60°C x 0.1°
• Conductivity: 0 - 5000uS x 10uS
• pH: 0 - 14pH x 0.01pH
• Color LCD display for sensor monitoring & graphing optional
• Real Time Clock (RTC): Battery Backup Included

Features

• WiFi optional for direct sensor monitoring and web portal connection
• GrowNET™ port for connection to AgrowDose Pumps, LX1 USB link or LX2 ModLINK
• MODBUS RTU for industrial PLC applications: Available 4-20mA analog outputs
• Durable splash-proof ABS plastic enclosure: Conformal coated circuit boards
• 1-Year Warranty
• Made in USA

GrowControl™ PHXM+ pH, Temp + ORP/DO Transmitter by Agrowtek

GrowControl PHX and PHX+ are precision digital sensor transmitters for temperature and pH, plus optional ORP. Color LCD display and button interface model allows instant access to sensor readings, guided calibration, alarms, historical graphing and more.

Internal memory logs over 20,000 data points per sensor. Connects to Agrowtek's GrowControl Cultivation Controllers as part of a complete facility control solution. Available with WiFi module for stand-alone or remote monitoring, data logging, alerts, and more.

LX1 USB AgrowLink connects the GrowNET™ port to a PC with free PC software for datalog download, graphing, calibration, configuration, firmware updates, etc. LX2 ModLINK connects GrowNET™ devices to RS-422/485 for MODBUS RTU protocol communication.

Sensors

• Water Temperature: -20 - 60°C x 0.1°
• Conductivity: 0 - 5000uS x 10uS
• pH: 0 - 14pH x 0.01pH
• Color LCD display for sensor monitoring & graphing optional
• Real Time Clock (RTC): Battery Backup Included

Features

• WiFi optional for direct sensor monitoring and web portal connection
• GrowNET™ port for connection to AgrowDose Pumps, LX1 USB link or LX2 ModLINK
• MODBUS RTU for industrial PLC applications: Available 4-20mA analog outputs
• Durable splash-proof ABS plastic enclosure: Conformal coated circuit boards
• 1-Year Warranty
• Made in USA

GrowControl™ PHX+ pH, Temp + ORP/DO Transmitter by Agrowtek

GrowControl PHX and PHX+ are precision digital sensor transmitters for temperature and pH, plus optional ORP. Color LCD display and button interface model allows instant access to sensor readings, guided calibration, alarms, historical graphing and more.

Internal memory logs over 20,000 data points per sensor. Connects to Agrowtek's GrowControl Cultivation Controllers as part of a complete facility control solution. Available with WiFi module for stand-alone or remote monitoring, data logging, alerts, and more.

LX1 USB AgrowLink connects the GrowNET™ port to a PC with free PC software for datalog download, graphing, calibration, configuration, firmware updates, etc. LX2 ModLINK connects GrowNET™ devices to RS-422/485 for MODBUS RTU protocol communication.

Sensors

• Water Temperature: -20 - 60°C x 0.1°
• Conductivity: 0 - 5000uS x 10uS
• pH: 0 - 14pH x 0.01pH
• Color LCD display for sensor monitoring & graphing optional
• Real Time Clock (RTC): Battery Backup Included

Features

• WiFi optional for direct sensor monitoring and web portal connection
• GrowNET™ port for connection to AgrowDose Pumps, LX1 USB link or LX2 ModLINK
• MODBUS RTU for industrial PLC applications: Available 4-20mA analog outputs
• Durable splash-proof ABS plastic enclosure: Conformal coated circuit boards
• 1-Year Warranty
• Made in USA

AgrowTouch™ Color Touch Screen for GC-ProXL by Agrowtek

AgrowTouch 3.5" color touch screen interface for the GrowControlTM GC-Pro and GC-Plus climate controllers. These industrial grade touch screens are lighting fast and offer the ultimate in convenience for monitoring and managing your controller.

Get instant access to all controller functions including:

• Manual overrides for all outputs and inputs
• Manually turn system on or off
• Full control of all settings
• Visual trend graph for all sensor readings
• Alarm history for the last 10 alarms

Also includes:

• Administrator and user lock-out and password protection
• Screen saver which turns off back light after 30 minutes

Specifications

• 4" Display
• 256 Colors
• For GC-Pro or GC-Plus
• 1 Year Warranty, Made in USA

PSU-12X1000 12Vdc, 1A Power Supply for Dosing Pumps by Agrowtek

Genuine OEM power supplies for Agrowtek Equipment.

• UL/CSA Listed Class II power supplies
• 6ft Cable
• 120V Wall Plug

PSU-24X2500 24Vdc, 2.5A PSU for GC-Pro/XL by Agrowtek

Genuine OEM power supplies for Agrowtek Equipment.

• UL/CSA Listed Class II power supplies
• 6ft Cable
• 120V Wall Plug

PSU-24X500 24Vdc, 0.5A Power Supply for Relays by Agrowtek

Genuine OEM power supplies for Agrowtek Equipment.

• UL/CSA Listed Class II power supplies
• 6ft Cable
• 120V Wall Plug

RD12 Twelve Contact Relay Module by Agrowtek

Agrowtek's RD series relays feature 4, 6, 8, or 12 individual dry-contact relays designed for interfacing low-voltage GrowControl™ outputs with custom relay/contactor electrical panels in greenhouses, HVAC systems, chillers, vent/shade motor controllers, electrical circuits up to 5A@120VAC and more. Any device or circuit which can be operated by a dry contact can be controlled by an RD relay.

Specifications

• 5A/120V Relay Dry Contacts
• SPST (single pole single throw)
• Independent Common Terminals
• Powder coated steel enclosure
• Mounting holes for easy wall-mount
• 2 Year Warranty, Made in USA

Applications

• Greenhouses & Growing Facilities
• Home & Hobby Automation
• Analytical, Research & Academic
• Building Automation
• Industrial Automation
• OEM & Custom Applications