Agrowtek

AgrowDose™ AD2 Dual Peristaltic Dosing Pump by Agrowtek

AgrowDose™ AD dosing pumps are rugged and economical single, dual or quad-head peristaltic pumps designed for injecting nutrient solutions, pH buffers and more into stock tanks or pressurized water lines up to 25psi when controlled by Agrowtek's GC-Pro/XL series cultivation control systems.

Pump heads feature an inlet suction tube and an outlet pressure tube. Simply place the inlet side into any size nutrient or buffer stock tank and route the outlet to the reservoir or use our PBX series manifolds to dose into a recirculating and monitoring loop. Pumps can draw solutions up to 10ft vertical lift and do not require priming. Peristaltic action resists fouling or clogging even with thick fluids.

AgrowDose™ pump motors operate independently at a fixed speed (~50mL/min) when the 24V discrete inputs are activated by a controller's outputs such as the GC-Pro or GC-ProXL. Built-in relays on the AD2 and AD4 pumps switch power from the included wall adapter to operate the pump motors. (AD1 does not have control a relay built into pump.)

Quick-change pump head offers fast, easy maintenance when tubing wears out.

• 120Vac/12Vdc Power adapter included for motors
• 1/4" OD x 3/16" ID FDA Tubing
• ~50mL/min per pump

Applications

• Greenhouses & Growing Facilities Hydroponics pH Control
• Agricultural & Aquaponics
• Aquarium
• Pool & Spa
• Analytical, Research & Academic
• Industrial Process Water, General Purpose

AgrowDose™ AD4 Quad Peristaltic Dosing Pump by Agrowtek

AgrowDose™ AD dosing pumps are rugged and economical single, dual or quad-head peristaltic pumps designed for injecting nutrient solutions, pH buffers and more into stock tanks or pressurized water lines up to 25psi when controlled by Agrowtek's GC-Pro/XL series cultivation control systems.

Pump heads feature an inlet suction tube and an outlet pressure tube. Simply place the inlet side into any size nutrient or buffer stock tank and route the outlet to the reservoir or use our PBX series manifolds to dose into a recirculating and monitoring loop. Pumps can draw solutions up to 10ft vertical lift and do not require priming. Peristaltic action resists fouling or clogging even with thick fluids.

AgrowDose™ pump motors operate independently at a fixed speed (~50mL/min) when the 24V discrete inputs are activated by a controller's outputs such as the GC-Pro or GC-ProXL. Built-in relays on the AD2 and AD4 pumps switch power from the included wall adapter to operate the pump motors. (AD1 does not have control a relay built into pump.)

Quick-change pump head offers fast, easy maintenance when tubing wears out.

• 120Vac/12Vdc Power adapter included for motors
• 1/4" OD x 3/16" ID FDA Tubing
• ~50mL/min per pump

Applications

• Greenhouses & Growing Facilities Hydroponics pH Control
• Agricultural & Aquaponics
• Aquarium
• Pool & Spa
• Analytical, Research & Academic
• Industrial Process Water, General Purpose

AgrowDose™ AD4i Quad Intelligent Dosing Pump by Agrowtek

AgrowDose AD4 "quad" peristaltic dosing pump with four independent pump heads for injecting nutrient solutions, pH buffers, chlorine, chemicals, food and beverage mixing, and more. Pump precise volumes of liquids at variable flow rates into reservoirs or pressurized lines (up to 25psi.)

AgrowDose pumps connect instantly to Agrowtek's intelligent SXH and PHX dosing controllers through the GrowNET™ port for advanced automated dosing functions. Use stand-alone with the LX1 USB AgrowLINK for PC batch dosing, or the LX2 ModLINK for MODBUS.

Pumps can draw solutions up to 10ft vertical lift and do not require priming. Peristaltic action resists fouling or clogging even with thick fluids.

Features

• Four independent dosing pumps
• Precision dosing accuracy < 1mL: Variable speed, reversable
• 12V DC input power: 120V Wall adapter included
• Easy-change pump heads: Twist & replace; no tools required
• 1-Year Warranty
• WiFi optional
• GrowNET™ Digital Communication Port
• MODBUS RTU for industrial PLC control: Independent variable speeds, reversable
• Durable powder-coated steel enclosure
• Made in USA

AgrowDose™ AD5i Penta Intelligent Dosing Pump by Agrowtek

AgrowDose AD5 "penta" peristaltic dosing pump with five independent pump heads for injecting nutrient solutions, pH buffers, chlorine, chemicals, food and beverage mixing, and more. Pump precise volumes of liquids at variable flow rates into reservoirs or pressurized lines (up to 25psi.)

AgrowDose pumps connect instantly to Agrowtek's intelligent SXH and PHX dosing controllers through the GrowNET™ port for advanced automated dosing functions. Use stand-alone with the LX1 USB AgrowLINK for PC batch dosing, or the LX2 ModLINK for MODBUS.

Pumps can draw solutions up to 10ft vertical lift and do not require priming. Peristaltic action resists fouling or clogging even with thick fluids.

Features

• Five independent dosing pumps
• Precision dosing accuracy < 1mL: Variable speed, reversable
• 12V DC input power: 120V Wall adapter included
• Easy-change pump heads: Twist & replace; no tools required
• 1-Year Warranty
• WiFi optional
• GrowNET™ Digital Communication Port
• MODBUS RTU for industrial PLC control: Independent variable speeds, reversable
• Durable powder-coated steel enclosure
• Made in USA

AgrowTouch™ Color Touch Screen for GC-Pro by Agrowtek

AgrowTouch 3.5" color touch screen interface for the GrowControlTM GC-Pro and GC-Plus climate controllers. These industrial grade touch screens are lighting fast and offer the ultimate in convenience for monitoring and managing your controller.

Get instant access to all controller functions including:

• Manual overrides for all outputs and inputs
• Manually turn system on or off
• Full control of all settings
• Visual trend graph for all sensor readings
• Alarm history for the last 10 alarms

Also includes:

• Administrator and user lock-out and password protection
• Screen saver which turns off back light after 30 minutes

Specifications

• 4" Display
• 256 Colors
• For GC-Pro or GC-Plus
• 1 Year Warranty, Made in USA

CAB-DIN6-MM15 15ft Sensor Cable by Agrowtek

6-pin DIN analog sensor cables for GrowControl™ GC-Pro/XL controllers. Connect SXC climate sensors and SXH hydroponics sensors to the controller's sensor ports using these standard cables. 15ft. sensor cable is included with each sensor; 50ft extension cables may be connected to the 15ft sensor cable to extend the length as required.

CAB-GX100 GrowNET Patch Cable, 100ft by Agrowtek

Agrowtek standard GrowNET™ patch cable (RJ-45 / cat5e) for connecting GrowNET™ devices. UTP 30AWG flat cables are available in various lengths.

• GrowNET™ Straight Cable
• Easy to Install
• 1-Year Warranty

CAB-GX20 GrowNET Patch Cable, 20ft by Agrowtek

Agrowtek standard GrowNET™ patch cable (RJ-45 / cat5e) for connecting GrowNET™ devices. UTP 30AWG flat cables are available in various lengths.

• GrowNET™ Straight Cable
• Easy to Install
• 1-Year Warranty

CAB-GX50 GrowNET Patch Cable, 50ft by Agrowtek

Agrowtek standard GrowNET™ patch cable (RJ-45 / cat5e) for connecting GrowNET™ devices. UTP 30AWG flat cables are available in various lengths.

• GrowNET™ Straight Cable
• Easy to Install
• 1-Year Warranty

CAB-GXO GrowNET Cross-Over Kit by Agrowtek

A GrowNET cross-over adapter is required when connecting Agrowtek's intelligent sensors and relays in a mini-control system. The cross-over kit (included with mini-control system kits) has a 6" pigtail cable and cross-over adapter for use with standard GrowNET (cat5e) cables.

• GrowNET™ Cross-Over
• Easy to Install
• 1-Year Warranty

CAB-USBSER USB-Serial Converter Cable by Agrowtek

Don't have a serial port on your computer? Just plug this serial port converter into any USB port.

Uses the newer generation "FTDI32" chipset which is fully compatible with all Windows versions and PCs.

Includes software drivers CD (drivers self-install on Windows 7 and newer.) Works with all GrowControl™ software versions.

CX1H Hard Wire Contactor, 240V 25A by Agrowtek

Hard-wired contactor to be operated by the GrowControl™ GC-Pro/XLcontrollers. With a 20 amp / 240VAC capacity, the CX1H is capable of switching over 4000 watts of lighting each! Can be used for 1x 240V@20A circuit or 2x 120V@20A circuits.

Heavy duty relays have contacts rated for 30 amps!

Must be wired directly to a 20 A or less branch protected (circuit breaker) circuit(s.)

Rugged and safe powder coated steel enclosure with easy to read labeling.

Specifications

• DPST Circuit contactor
• 20 Amp @ 240V total capacity
• Standard 24VDC Relay coil voltage, available with 120V trigger adapter
• Powder coated steel enclosure
• Mounting holes for easy wall-mount
• 2 Year Warranty, Made in USA
• CSA Safety Listed

Applications

• Greenhouses & Growing Facilities
• Home & Hobby Automation
• Analytical, Research & Academic
• Building Automation
• Industrial Automation
• OEM & Custom Applications

CX4 Outlet Contactor, 120V 15A by Agrowtek

CX4 and CX4A feature four outlets that are operated simultaneously from a single 24Vdc trigger signal. CX4 series contactors are designed for powering lighting, banks of fans, and other equipment which is operated simultaneously.

To operate the CX4/CX4A, the trigger input (24Vdc) is connected to any desired output on the GC-Pro controller and power (120/240Vac) is connected to the power terminals.

To operate the CX4/CX4A from the GC-Plus or other 120V outlet trigger, use the CX-T trigger cord kit.

Features

• Wire direct to GC-Pro outputs
• 24Vdc Relay coil voltage
• Heavy duty powder coated sheet metal enclosure
• Fully grounded
• 15A / 120Vac rated CX4
• 25A / 240Vac rated CX4A
• 2-Year full factory warranty Made in USA

CX4A Outlet Contactor, 240V 25A by Agrowtek

Four relay-controlled outlets to be operated by the GrowControl™ GC-Pro/XL controllers and other 24Vdc equipment. With a 20 amp / 240VAC capacity, the CX4A is capable of switching over 4000 watts of lighting each!

Operate four (4) outlets at once from this one single, convenient contactor enclosure. Heavy duty relays have contacts rated for 30 amps!

Must be wired directly to a 20 A or less branch protected (circuit breaker) circuit.

Rugged and safe powder coated steel enclosure with easy to read labeling. CSA listed for U.S. and Canada.

Specifications

• (4) 240V Nema 6-15 Contactor controlled outlets (single trigger)
• 20 Amp @ 240V total capacity
• Standard 24VDC Relay coil voltage, available with 120V trigger adapter
• Powder coated steel enclosure
• Mounting holes for easy wall-mount
• 2 Year Warranty, Made in USA
• CSA Safety Listed

Applications

• Greenhouses & Growing Facilities
• Home & Hobby Automation
• Analytical, Research & Academic
• Building Automation
• Industrial Automation
• OEM & Custom Applications

DIN-K DIN Rail Bracket Kit by Agrowtek

DIN rail mounting brackets mount Agrowtek's PHX & SXH hydroponics sensors, HX8 device hubs, and LX series interface modules on DIN rail.

Rugged brackets are made in Germany and easily click on and off of DIN rail. Kit includes two brackets and two thread-forming screws for plastic sized for mounting Agrowtek's products to the brackets.

• Rugged Construction
• Commercial & Industrial Applications
• Easy to Install; screws included.

DXI8 DC 8-Input Module by Agrowtek

DXI8 digital control interface features eight (8) analog inputs selectable for 0-5V or 0/4-20mA. Analog inputs third-party analog 5V or current-loop sensor integration, as well as discrete sensor detection for SXL liquid sensors, float switches, and other dry-contact type sensors. On-board 500mA 5Vdc power supply provides stable power for analog or discrete sensing applications.

Connects instantly to Agrowtek's master control systems or intelligent sensors via a GrowNET port for advanced automated control functions. GrowNET port accepts MODBUS RTU communication for PLC control.

LED indicators on the front panel provide status of power supply and data communications. Designed for DIN rail mounting in control cabinets.

UL Listing pending.

Features

• Eight (8) 0-5Vdc Analog Inputs
• All Channels 0/4-20mA Selectable
• GrowNET™ Digital Communication Port
• MODBUS RTU for industrial PLC applications 9-24Vdc, DIN rail mount
• Made in USA
• 1-Year Warranty

Applications

• Soil Moisture Sensors
• Industrial Sensors 0-5V or 4-20mA
• Discrete Sensor Inputs Float Switches, Door Sensors, etc.
• SXL Optical Liquid Sensors Automate Drain/Fill with GCX System

DXIO Mixed I/O Module by Agrowtek

DXIO digital control interface features up to two (2) 10A NO/NC relay contacts, two (2) 1-Amp transistor (FET) outputs capable of 1kHz PWM, and two (2) analog inputs selectable for 0-5V or 0/4-20mA. Ideal for operating DC powered solenoid and irrigation valves, relays & contactors, etc. PWM functions for integration with dimmable lighting or variable speed motor controllers. Analog inputs allow SXL liquid sensor connectivity and other third-party 0-5V or 0/4-20mA sensors.

Connects instantly to Agrowtek's master control systems or intelligent sensors via a GrowNET port for advanced automated control functions. GrowNET port accepts MODBUS RTU communication for PLC control.

LED indicators on the front panel provide status of power supply and data communications. Designed for DIN rail mounting in control cabinets. UL Listing pending

Features

• Two (2) 1-Amp Transistor Outputs with 10-90% 1kHz PWM
• Two (2) 10-Amp NO/NC Form C Relays
• Two (2) 0-5V or 0/4-20mA Analog Inputs
• PWM Capable Transistor Outputs
• Built-In Flyback & Transient Suppression on FET outputs
• GrowNET™ Digital Communication Port
• MODBUS RTU for industrial PLC applications 9-24Vdc, DIN rail mount
• Made in USA
• 1-Year Warranty

Applications

• Irrigation Solenoid Valves
• Relay Control Load control in buildings & greenhouses
• Custom Equipment & Sensors
• Variable Speed Fans & Motors

DXO8 DC 8-Output Module by Agrowtek

DXO8 digital control interface features eight (8) 1-Amp transistor (FET) outputs. Ideal for operating relays & contactors in panels, DC powered solenoid and irrigation valves, etc. Six (6) of the outputs are capable of 1kHz PWM functions for integration with dimmable lighting and variable speed motor controllers.

Connects instantly to Agrowtek's master control systems or intelligent sensors via a GrowNET port for advanced automated control functions. GrowNET port accepts MODBUS RTU communication for PLC control.

LED indicators on the front panel provide status of power supply and data communications. Designed for DIN rail mounting in control cabinets.

UL Listing pending.

Features

• Eight (8) 1-Amp Transistor Outputs
• Six (6) PWM Channels 10-90% @1kHz
• Built-In Flyback & Transient Suppression on FET outputs
• GrowNET™ Digital Communication Port
• MODBUS RTU for industrial PLC applications 9-24Vdc, DIN rail mount
• Made in USA
• 1-Year Warranty

Applications

• Irrigation Solenoid Valves
• Relay Control Load control in buildings & greenhouses
• Custom Equipment & Sensors
• Variable Speed Fans & Motors

DXV4 Dimming Controller, 0-10V Output Module by Agrowtek

GrowControl™ DXV4 modules for DIN rail feature four (4) 0-10V analog outputs for dimming lighting zones and other analog control. Dim up to 50 light fixtures per output channel.

DX series modules can be operated on 12-24Vdc. DXV4 modules perform with the highest accuracy on 24Vdc.

GrowNET™ port accepts MODBUS RTU communication for PLC control. Internal digital controller operates relays with MODBUS commands and logs the total number or relay contact closures for each relay in memory. Easily recall manufacturing info such as unit serial number, date of manufacture, contact count, status, etc.

Features

• 0-10V (11V max) DC Outputs
• Drive up to 50 Fixtures per Channel
• Digital Control, MODBUS Addressable
• Made in USA

Applications

• Greenhouses & Growing Facilities
• Building Automation
• Industrial Automation
• OEM & Custom Applications

Ethernet Port by Agrowtek

An Ethernet port is optional providing the capability to connect the controller directly to an Ethernet network for access and control via remote internet connections. A serial port is included on all systems for direction connection to a PC.

ENCL-1206 Weatherproof Enclosure, GC-Pro by Agrowtek

Weather-resistant enclosure protects your GrowControl™ control system from dirt, dust, water, mild acids and the elements!

Rugged all-polycarbonate construction is rated for indoor and outdoor use and is UV stabilized.

Clear hinged door allows visibility and easy access to the controller screen. Snap latches and a seal secure the door water-tight for a NEMA 4X / IP66 seal.

• Indoor & Outdoor Use
• UV Stabilized
• Clear Cover
• Snap Latch Closure
• Flanges for wall mounting
• NEMA 4X & IP66 Ratings
• CUL & CSA Approvals

ENCL-1412 Weatherproof Enclosure, GC-ProXL by Agrowtek

Weather-resistant enclosure protects your GrowControl™ control system from dirt, dust, water, mild acids and the elements!

Rugged all-polycarbonate construction is rated for indoor and outdoor use and is UV stabilized.

Clear hinged door allows visibility and easy access to the controller screen. Snap latches and a seal secure the door water-tight for a NEMA 4X / IP66 seal.

• Indoor & Outdoor Use
• UV Stabilized
• Clear Cover
• Snap Latch Closure
• Flanges for wall mounting
• NEMA 4X & IP66 Ratings
• CUL & CSA Approvals

GrowControl™ GC-Pro Climate & Hydroponics Controller by Agrowtek

Features

• (12) 24Vdc Outputs (expandable up to 20 internal, 44 with XO system)
• (2) Analog sensor ports (expandable up to 4)
• (4) 24Vdc Discrete Inputs (for switch sensors)
• Multi-Zone capable; control 1-4 environments
• AgrowTouchTM screen with alarms & trending optional
• Serial port standard; Ethernet port optional
• Security levels with password protection
• Heavy duty powder-coated sheet-metal enclosures
• 3-Year full factory warranty - Made in USA

GC-Pro Standard Controls

• (3) Lighting Zones, Hot Fire Prevention w/ separate Day/Night Outputs
• (1) Light Flip Box Control
• (8) Multi-Use Thermostats
• (8) Multi-Use Humidistats
• (2) CO2 Injection w/Boost Timer & Ventilation
• (8) 24-Hour Timers, (8) Standard Cycle-Timers (secs, mins or hrs), (4) 24-Hour Scheduled Cycle Timers, (4) Off-Delay Timers, (4) 24-Hr Cancel Timers, (4) Re-Start Delay Timers, (4) Hour Meters
• (4) 16-Stage Irrigation Valve & Pump Timer Controls
• (2) Nutrient Dosing Zones, 8 stages w/Batch Dosing and 16-week Recipe Scheduler
• (2) Automatic Reservoir Drain & Fill Controls
• (2) pH Dosing Zones with (1) up and (1) down stage each
• Outdoor Weather Station Monitoring & Control
• High & Low Alarms & Limits, High Temp Lighting Shut-Off

GC-Pro-C Greenhouse Model

• (4) Lighting Zones
• (8) Vent/Shade/Curtain (VSC) Proportional Controls
• (4) Zones Multi-Stage Temperature & Humidity Control (6 stages of cooling, 2 stages of heating, humidify & dehumidify per zone)

Fee PC Software

• Local or Remote Internet Access
• Full Control of all Features (same as touch screen)
• Password Protected with Login Records
• Graphical Trending; Zoom, Save & Print
• Unlimited Data Logging to .CSV
• Camera Integration & Image Capturing
• E-Mail Alerts for Alarms
• Easy to Use
• Frequently Updated