Agrowtek

PBX-104 4-Port Chemical Injection Manifold by Agrowtek

PBX-104 is a simple multi-port manifold for connecting Agrow-Dose peristaltic dosing pumps into a recirculating sample loop for injecting chemicals such as nutrients or pH buffers.

The PBX-100 series injection manifolds are often combined with a PBX-210, PBX-310, or PBX-410 sensor probe manifold for sampling of the solution prior to the injection point.

AgrowDose™ AD1 Peristaltic Dosing Pump by Agrowtek

AgrowDose AD1 dosing pump is a rugged and economical singlehead peristaltic pump designed for injecting nutrient solutions, pH buffers and more into stock tanks or pressurized water lines up to 20psi.

AD1 Pump operates at a fixed speed (~50mL/min) when powered and requires a controlled outlet to operate the pump (such as RX1 or RX4.) Includes a standard wall plug power supply.

Pump heads feature an intlet tube and an outlet tube. Simply place the inlet side into any size nutrient or buffer stock tank and route the outlet to the reservoir. Pumps can draw solutions up to 10ft vertical lift and do not require priming. Peristaltic action resists fouling or clogging even with thick fluids.

Features

• Single dosing pump
• Precision dosing accuracy: Fixed flow rate, non-reversable
• Easy-change pump heads: Twist & replace; no tools required
• Durable powder-coated steel enclosure
• Made in USA
• 1-Year Warranty

Typical Applications

• Agricultural Nutrient or pH Dosing
• Industrial Chemical Dispensing
• Laboratory Dispensing
• Aquarium
• Pool & Spa
• OEM & Custom Applications

RX6 Six Outlet Relay, 120V 15A by Agrowtek

Operate six different pieces of equipment from GrowControl™ cultivation control systems and other 24Vdc equipment with this one single, convenient relay enclosure! Heavy duty relays have contacts rated for 30 amps!

Wire power directly to a branch protected circuit or install a power cord to plug the RX6 into a wall outlet. 24Vdc trigger inputs connect to GC-Pro/XL 24Vdc outputs. Each outlet has it's own trigger input and can operate independently..

Rugged and safe powder coated steel enclosure with easy to read labeling.

Applications

• Connect to GC-Pro/XL series controllers to control a 120V plugged device.
• Connect to any industrial PLC system's 24Vdc outputs.
• Use "trigger cord kit" to control the RX1's outlet from another 120V outlet.

UL flame rated enclosure & fully grounded for safety. CSA listed for U.S. and Canada.

Specifications

• (6) 15A Relay controlled outlets
• 15 Amp @ 120V total capacity
• Available with 6ft. power cord w/120V plug
• Standard 24VDC Relay coil voltage
• Powder coated steel enclosure
• Mounting holes for easy wall-mount
• 2 Year Warranty, Made in USA
• CSA Safety Listed

SKD Economy Skid Stand with Feet by Agrowtek

SKD skid stands are an ideal mounting solution for AgrowDose™ modular dosing panels in applications requiring mobility or where wall mounting is not possible such as in the middle of a greenhouse or factory floor. Stands are aluminum construction available in an economy light-weight or heavy-duty option, and are equipped with leveling feet or can be upgraded to include swivel casters for mobility.

Stands can have up to three adjustable height stainless-steel shelves added for holding chemical containers. Each shelf is 11-1/2" deep and can hold up to 70 lbs.

AgrowDose™ AD Discrete Dosing Pumps for GC-Pro/XL by Agrowtek

AgrowDose™ AD dosing pumps are rugged and economical single, dual or quad-head peristaltic pumps designed for injecting nutrient solutions, pH buffers and more into stock tanks or pressurized water lines up to 25psi when controlled by Agrowtek's GC-Pro/XL series cultivation control systems.

Pump heads feature an inlet suction tube and an outlet pressure tube. Simply place the inlet side into any size nutrient or buffer stock tank and route the outlet to the reservoir or use our PBX series manifolds to dose into a recirculating and monitoring loop. Pumps can draw solutions up to 10ft vertical lift and do not require priming. Peristaltic action resists fouling or clogging even with thick fluids.

AgrowDose™ pump motors operate independently at a fixed speed (~50mL/min) when the 24V discrete inputs are activated by a controller's outputs such as the GC-Pro or GC-ProXL. Built-in relays on the AD2 and AD4 pumps switch power from the included wall adapter to operate the pump motors. (AD1 does not have control a relay built into pump.)

Quick-change pump head offers fast, easy maintenance when tubing wears out.

• 120Vac/12Vdc Power adapter included for motors
• 1/4" OD x 3/16" ID FDA Tubing
• ~50mL/min per pump

Applications

• Greenhouses & Growing Facilities Hydroponics pH Control
• Agricultural & Aquaponics
• Aquarium
• Pool & Spa
• Analytical, Research & Academic
• Industrial Process Water, General Purpose

GrowControl™ MDX5 Dosing Panel (penta pump, B size panel) by Agrowtek

MDXP Modular Dosing Panels automate nutrient dosing and pH control (+ORP) in large or small nutrient stock tanks for re-circulating or drain-to-waste fertigation systems. These pre-assembled panels come ready to dose! Just connect the water manifold to your system and plug in power! Controller, dosing pumps and water manifold are all conveniently mounted on a stainless steel back panel simplifying installation and providing a clean appearance. Available in 1, 2, 4 or 5 pump configurations. Each pump can be configured for pH up/down, EC nutrient dosing or ORP as required. SXH hydro sensor with LCD display allows advanced configuration of the pumps and dosing parameters, manual pump priming, as well as graphing, alarms, data logging and more in a simple to use menu interface. Monitor remotely from any web browser and send email alerts with the optional WiFi module.

AgrowDose peristaltic pumps have legendary reliability, are self-priming, draw over 10ft of lift and pump into lines up to 25psi (up to 45psi with high-pressure check-valve kit.) Pumps feature easy-maintenance with no-tool, twist-off replaceable heads. Stainless steel back-panel makes installation as simple as hanging on a wall and connecting plumbing.

GrowControl™ MDX5 Mini Dosing System (penta pump) by Agrowtek

GrowControl MDX Mini Dosing System automates nutrient and pH dosing by combining Agrowtek's digital SXH hydro controller with AgrowDose precision dosing pumps. Available with 1, 2, 4, or 5 pump heads. MDX+ model includes ORP. Each pump can be configured independently for sensor type, dose volume and delay time.

SXHM hydro controller with lcd display allows advanced configuration of the pumps and dosing parameters, manual pump priming, as well as graphing, alarms, data logging and more.

GrowControl™ SXH+ Temp, pH, EC + ORP/DO Transmitter by Agrowtek

GrowControl SXH is a precision digital sensor transmitter for temperature, pH, conductivity. SXH+ includes optional oxidation reduction potential or dissolved oxygen probe input. Optional color LCD display and button interface allows instant access to sensor readings, guided calibration, alarms, historical graphing and more.

Internal memory logs over 20,000 data points per sensor. Available with WiFi module for remote monitoring, data logging, alerts, and more. LX1 USB AgrowLink connects the GrowNET port to a PC for datalog download to .csv, graphing, calibration, configuration, updates, etc. using free PC software.

Connects to Agrowtek's GrowControl Cultivation Controllers as part of a complete facility control solution. LX2 ModLINK connects GrowNET™ devices to RS-422/485 for MODBUS RTU protocol.

Sensors

• Water Temperature: -20 - 60°C x 0.1°
• Conductivity: 0 - 5000uS x 10uS
• pH: 0 - 14pH x 0.01pH
• ORP or DO (+ model): +/-1000mv x 1mV; 0 - 20mg/mL x 0.1mg/mL
• Color LCD display for sensor monitoring & graphing optional
• Real Time Clock (RTC): Battery Backup Included

Features

• WiFi optional for direct sensor monitoring and web portal connection
• GrowNET link for connection to AgrowDose: Pumps or GrowControl™ master controller
• Available 4-20mA analog outputs: MODBUS RTU for industrial PLC applications
• Durable splash-proof ABS plastic enclosure: Conformal coated circuit boards
• 1-Year Warranty
• Made in USA

PBX-410 4-Port Sensor Manifold by Agrowtek

PBX sensor manifolds integrate water-tight gland fittings into a 1" PVC manifold for sensing pH, conductivy, ORP and water temperature inline with a recirculating pump. Compression glands have a rubber insert that clamps around the probes when tightened. Manifolds make it easy to install and remove probes for calibration and maintenance.

Available in 2, 3 or 4 port configurations. Max: 60psi, 30gpm.

GrowControl™ MDX4 Dosing Panel (quad pump, B size panel) by Agrowtek

MDXP Modular Dosing Panels automate nutrient dosing and pH control (+ORP) in large or small nutrient stock tanks for re-circulating or drain-to-waste fertigation systems. These pre-assembled panels come ready to dose! Just connect the water manifold to your system and plug in power! Controller, dosing pumps and water manifold are all conveniently mounted on a stainless steel back panel simplifying installation and providing a clean appearance. Available in 1, 2, 4 or 5 pump configurations. Each pump can be configured for pH up/down, EC nutrient dosing or ORP as required. SXH hydro sensor with LCD display allows advanced configuration of the pumps and dosing parameters, manual pump priming, as well as graphing, alarms, data logging and more in a simple to use menu interface. Monitor remotely from any web browser and send email alerts with the optional WiFi module.

AgrowDose peristaltic pumps have legendary reliability, are self-priming, draw over 10ft of lift and pump into lines up to 25psi (up to 45psi with high-pressure check-valve kit.) Pumps feature easy-maintenance with no-tool, twist-off replaceable heads. Stainless steel back-panel makes installation as simple as hanging on a wall and connecting plumbing.

SXL-F Optical Liquid Sensor Set, FILLING by Agrowtek

Electronic optical "liquid level control system" includes two liquid sensors for high and low "fill" or "drain" control of fluids in tanks, reservoirs, etc. Only power and a valve or relay is required to complete the level control system; no external controller required. Easy to wire and setup. Includes one standard and one latching sensor. Compatible with 5-24Vdc valves and relays. Available with optional VX1 water valve kit or RX1 outlet kit for direct operation of 120Vac pumps, valves and other equipment.

CAB-DIN6-MM15 15ft Sensor Cable by Agrowtek

6-pin DIN analog sensor cables for GrowControl™ GC-Pro/XL controllers. Connect SXC climate sensors and SXH hydroponics sensors to the controller's sensor ports using these standard cables. 15ft. sensor cable is included with each sensor; 50ft extension cables may be connected to the 15ft sensor cable to extend the length as required.

GrowControl™ GC-Pro-C Greenhouse Controller by Agrowtek

Features

• (12) 24Vdc Outputs (expandable up to 20 internal, 44 with XO system)
• (2) Analog sensor ports (expandable up to 4)
• (4) 24Vdc Discrete Inputs (for switch sensors)
• Multi-Zone capable; control 1-4 environments
• AgrowTouchTM screen with alarms & trending optional
• Serial port standard; Ethernet port optional
• Security levels with password protection
• Heavy duty powder-coated sheet-metal enclosures
• 3-Year full factory warranty - Made in USA

GC-Pro Standard Controls

• (3) Lighting Zones, Hot Fire Prevention w/ separate Day/Night Outputs
• (1) Light Flip Box Control
• (8) Multi-Use Thermostats
• (8) Multi-Use Humidistats
• (2) CO2 Injection w/Boost Timer & Ventilation
• (8) 24-Hour Timers, (8) Standard Cycle-Timers (secs, mins or hrs), (4) 24-Hour Scheduled Cycle Timers, (4) Off-Delay Timers, (4) 24-Hr Cancel Timers, (4) Re-Start Delay Timers, (4) Hour Meters
• (4) 16-Stage Irrigation Valve & Pump Timer Controls
• (2) Nutrient Dosing Zones, 8 stages w/Batch Dosing and 16-week Recipe Scheduler
• (2) Automatic Reservoir Drain & Fill Controls
• (2) pH Dosing Zones with (1) up and (1) down stage each
• Outdoor Weather Station Monitoring & Control
• High & Low Alarms & Limits, High Temp Lighting Shut-Off

GC-Pro-C Greenhouse Model

• (4) Lighting Zones
• (8) Vent/Shade/Curtain (VSC) Proportional Controls
• (4) Zones Multi-Stage Temperature & Humidity Control (6 stages of cooling, 2 stages of heating, humidify & dehumidify per zone)

Fee PC Software

• Local or Remote Internet Access
• Full Control of all Features (same as touch screen)
• Password Protected with Login Records
• Graphical Trending; Zoom, Save & Print
• Unlimited Data Logging to .CSV
• Camera Integration & Image Capturing
• E-Mail Alerts for Alarms
• Easy to Use
• Frequently Updated

GrowControl™ MDX4 Mini Dosing System (quad pump) by Agrowtek

GrowControl MDX Mini Dosing System automates nutrient and pH dosing by combining Agrowtek's digital SXH hydro controller with AgrowDose precision dosing pumps. Available with 1, 2, 4, or 5 pump heads. MDX+ model includes ORP. Each pump can be configured independently for sensor type, dose volume and delay time.

SXHM hydro controller with lcd display allows advanced configuration of the pumps and dosing parameters, manual pump priming, as well as graphing, alarms, data logging and more.

GrowControl™ SXH+ pH/EC/Temp +ORP/DO Hydroponics Sensor by Agrowtek

GrowControl SXH is a precision digital sensor transmitter for temperature, pH, conductivity. SXH+ includes optional oxidation reduction potential or dissolved oxygen probe input. Optional color LCD display and button interface allows instant access to sensor readings, guided calibration, alarms, historical graphing and more.

Internal memory logs over 20,000 data points per sensor. Available with WiFi module for remote monitoring, data logging, alerts, and more. LX1 USB AgrowLink connects the GrowNET port to a PC for datalog download to .csv, graphing, calibration, configuration, updates, etc. using free PC software.

Connects to Agrowtek's GrowControl Cultivation Controllers as part of a complete facility control solution. LX2 ModLINK connects GrowNET™ devices to RS-422/485 for MODBUS RTU protocol.

Sensors

• Water Temperature: -20 - 60°C x 0.1°
• Conductivity: 0 - 5000uS x 10uS
• pH: 0 - 14pH x 0.01pH
• ORP or DO (+ model): +/-1000mv x 1mV; 0 - 20mg/mL x 0.1mg/mL
• Color LCD display for sensor monitoring & graphing optional
• Real Time Clock (RTC): Battery Backup Included

Features

• WiFi optional for direct sensor monitoring and web portal connection
• GrowNET link for connection to AgrowDose: Pumps or GrowControl™ master controller
• Available 4-20mA analog outputs: MODBUS RTU for industrial PLC applications
• Durable splash-proof ABS plastic enclosure: Conformal coated circuit boards
• 1-Year Warranty
• Made in USA

AgrowDose™ MDX Nutrient, pH & ORP Dosing Panels by Agrowtek

MDXP Modular Dosing Panels automate nutrient dosing and pH control (+ORP) in large or small nutrient stock tanks for re-circulating or drain-to-waste fertigation systems. These pre-assembled panels come ready to dose! Just connect the water manifold to your system and plug in power! Controller, dosing pumps and water manifold are all conveniently mounted on a stainless steel back panel simplifying installation and providing a clean appearance. Available in 1, 2, 4 or 5 pump configurations. Each pump can be configured for pH up/down, EC nutrient dosing or ORP as required. SXH hydro sensor with LCD display allows advanced configuration of the pumps and dosing parameters, manual pump priming, as well as graphing, alarms, data logging and more in a simple to use menu interface. Monitor remotely from any web browser and send email alerts with the optional WiFi module.

AgrowDose peristaltic pumps have legendary reliability, are self-priming, draw over 10ft of lift and pump into lines up to 25psi (up to 45psi with high-pressure check-valve kit.) Pumps feature easy-maintenance with no-tool, twist-off replaceable heads. Stainless steel back-panel makes installation as simple as hanging on a wall and connecting plumbing.

DXR6 Dry-Contact 6-Output Relay Module by Agrowtek

DXR6 digital control interface features six (6) 1-Amp dry-contact relay outputs rated 30Vac/Vdc. Ideal for interfacing with 24Vac control signals for HVAC, dehumidifiers, and other mixed voltage control signals.

Connects instantly to Agrowtek's master control systems or intelligent sensors via a GrowNET port for advanced automated control functions. GrowNET port accepts MODBUS RTU communication for PLC control.

LED indicators on the front panel provide status of power supply and data communications. Designed for DIN rail mounting in control cabinets.

Features

• Six (6) 1-Amp Dry Contact Relay Outputs
• GrowNET™ Digital Communication Port
• MODBUS RTU for industrial PLC applications 9-24Vdc, DIN rail mount
• Made in USA
• 1-Year Warranty

Applications

• HVAC Systems 24Vac heat, cool, fan, valve & other signals
• Dehumidifiers
• Custom Equipment
• Irrigation Solenoid Valves

CX1H Hard Wire Contactor, 240V 25A by Agrowtek

Hard-wired contactor to be operated by the GrowControl™ GC-Pro/XLcontrollers. With a 20 amp / 240VAC capacity, the CX1H is capable of switching over 4000 watts of lighting each! Can be used for 1x 240V@20A circuit or 2x 120V@20A circuits.

Heavy duty relays have contacts rated for 30 amps!

Must be wired directly to a 20 A or less branch protected (circuit breaker) circuit(s.)

Rugged and safe powder coated steel enclosure with easy to read labeling.

Specifications

• DPST Circuit contactor
• 20 Amp @ 240V total capacity
• Standard 24VDC Relay coil voltage, available with 120V trigger adapter
• Powder coated steel enclosure
• Mounting holes for easy wall-mount
• 2 Year Warranty, Made in USA
• CSA Safety Listed

Applications

• Greenhouses & Growing Facilities
• Home & Hobby Automation
• Analytical, Research & Academic
• Building Automation
• Industrial Automation
• OEM & Custom Applications

CX4A Outlet Contactor, 240V 25A by Agrowtek

Four relay-controlled outlets to be operated by the GrowControl™ GC-Pro/XL controllers and other 24Vdc equipment. With a 20 amp / 240VAC capacity, the CX4A is capable of switching over 4000 watts of lighting each!

Operate four (4) outlets at once from this one single, convenient contactor enclosure. Heavy duty relays have contacts rated for 30 amps!

Must be wired directly to a 20 A or less branch protected (circuit breaker) circuit.

Rugged and safe powder coated steel enclosure with easy to read labeling. CSA listed for U.S. and Canada.

Specifications

• (4) 240V Nema 6-15 Contactor controlled outlets (single trigger)
• 20 Amp @ 240V total capacity
• Standard 24VDC Relay coil voltage, available with 120V trigger adapter
• Powder coated steel enclosure
• Mounting holes for easy wall-mount
• 2 Year Warranty, Made in USA
• CSA Safety Listed

Applications

• Greenhouses & Growing Facilities
• Home & Hobby Automation
• Analytical, Research & Academic
• Building Automation
• Industrial Automation
• OEM & Custom Applications

DXO8 DC 8-Output Module by Agrowtek

DXO8 digital control interface features eight (8) 1-Amp transistor (FET) outputs. Ideal for operating relays & contactors in panels, DC powered solenoid and irrigation valves, etc. Six (6) of the outputs are capable of 1kHz PWM functions for integration with dimmable lighting and variable speed motor controllers.

Connects instantly to Agrowtek's master control systems or intelligent sensors via a GrowNET port for advanced automated control functions. GrowNET port accepts MODBUS RTU communication for PLC control.

LED indicators on the front panel provide status of power supply and data communications. Designed for DIN rail mounting in control cabinets.

UL Listing pending.

Features

• Eight (8) 1-Amp Transistor Outputs
• Six (6) PWM Channels 10-90% @1kHz
• Built-In Flyback & Transient Suppression on FET outputs
• GrowNET™ Digital Communication Port
• MODBUS RTU for industrial PLC applications 9-24Vdc, DIN rail mount
• Made in USA
• 1-Year Warranty

Applications

• Irrigation Solenoid Valves
• Relay Control Load control in buildings & greenhouses
• Custom Equipment & Sensors
• Variable Speed Fans & Motors

PSU-24X500 24Vdc, 0.5A Power Supply for Relays by Agrowtek

Genuine OEM power supplies for Agrowtek Equipment.

• UL/CSA Listed Class II power supplies
• 6ft Cable
• 120V Wall Plug

GrowControl™ SXC Indoor Climate Sensor with CO2 by Agrowtek

GrowControl SXC Climate Sensor & Data Logger is a precision digital indoor sensor designed for hanging in growing environments featuring temperature, relative humidity, ambient light and optionally CO2 ppm.

Internal memory logs over 20,000 data points per sensor. Connects to Agrowtek's GrowControl™ Cultivation Controllers as part of a complete facility control solution. Available with WiFi module for stand-alone or remote monitoring, data logging, alerts, and more.

LX1 USB AgrowLink connects the GrowNET™ port to a PC with free PC software for datalog download, graphing, calibration, configuration, firmware updates, etc. LX2 ModLINK connects GrowNET™ devices to RS-422/485 for MODBUS RTU protocol communication.

Sensors

• Air Temperature: -20 - 60°C
• Relative Humidity: 0-99% RH (80% max operating)
• Light (Irradiance): 0-1000 Watts/m2
• Carbon Dioxide (optional): 0-2000 ppm
• Real Time Clock (RTC): Battery Backup optional
• Fan aspirated with air filter for high accuracy

Features

• WiFi optional for direct browser access and web portal connection
• GrowNET™ Digital Communication Port
• MODBUS RTU via LX2 ModLINK Optional 4-channel 4-20mA analog outputs
• Durable powder-coated steel enclosure
• 1-Year Warranty
• Made in USA