All Products

1436401 Digital Titrator Refill Cartridge: EDTA 0.0800 M by AquaPhoenix

For determination of Calcium and Total Hardness by Digital Titrator titration. 0.0800 M EDTA, Digits × 0.1 = mg/L CaCO3 in 100 mL sample. Approximately 40-100 tests

• Accurate results - when and where you need them
• Fast and Flexible
• Versatile
• Economical

08541-08 J24-1-304 Thermocouple, Wire, Type-J, 24-Gauge, Glass Braid Insulation, 100-ft Spool by Digi-Sense

Wire comes in 24-gauge size, ideal for fabricating your own probes or extension cables (meets ANSI and ASTM standards). Choose from wire with polyvinyl chloride (PVC), fluorinated ethylene propylene resin (FEP/FEP), fiberglass, high-temperature fiberglass, or ceramic fiber outer/inner insulation. These cables are also available in 100-ft or 1000-ft lengths for any application.

Part Number: BWS1-A2-PCB1

*Please note we can only ship RKI products to customers within the United States

35002-13 Waterproof/Shock-Resistant Digital Stopwatch with Calibration by Digi-Sense

Economical NIST-traceable stopwatch features split-mode timing to display the split-time while total timing continues. Alarm clock shows time of day and day of week. Water, dust, and shock resistant.

Includes:

NIST-traceable certificate based on a 24-hour period, 46"L neck cord, and 1.5 V button cell battery.

*Please note we can only ship RKI products to customers within the United States

27936 Flexible flue gas sampling probe, 180mm (7") probe length with 2m (6') dual hose, rated to 800°C (1470°F) max by Sauermann

This flexible probe is designed to access hard-to-reach pipes in tight spaces, while the flexible shaft means an end to awkward positions while taking measurements. This probe is available for Si-CA 030, Si-CA 130 and Si-CA 230 gas analyzers.

• Bends up to 90° with a radius of 8 cm
• Easy return to straight position
• 2 m dual hose with water trap
• 180 mm flexible probe shaft length

02104-N-5010 Searchline Excel Infrared Open Path Flammable Gas Detector, Short range TX/RX 5m to 40m UL Current Source by Honeywell Analytics

The Searchline Excel is the World's best selling infrared open path gas detector with over 25,000 units installed in challenging applications throughout industry. From the Arctic Circle to middle eastern deserts, customers have repeatedly selected the Searchline Excel as their preferred choice.

Product Evolution

Honeywell Analytics pioneered the original design of open path infrared flammable gas detectors with the introduction of the original Searchline back in 1987. Since then we have continued to work in conjunction with major international oil and gas companies to fully understand the demanding application requirements of these systems.

In 1998 we introduced Searchline Excel which has become the industry standard for open path gas detection by meeting and exceeding all customer driven demands.

With continuous improvement and the highest quality manufacturing and control processes, Honeywell Analytics Searchline Excel Open Path flammable gas detector provides best in class gas detection. Excel is often the chosen primary flammable gas detector in conjunction with Searchpoint Optima Plus as complimenting flammable point detection.

Why open path gas detection?

Open path detectors complement the use of individual point detectors and offer many significant benefits including:

• Reliable flammable gas detection, proven in use
• Wider area coverage - most likely to pick up any leak
• Very high speed of response
• Failsafe - no unrevealed failure modes - no possibility of blocked gas path to detector
• Detector location not as critical
• Indicates size of hazard
• Simple set up and commission
• Replaces multiple point devices

Applications include

• Offshore platforms & vessels (FPSO's)
• Downstream chemical processing plants
• Gas transport and pipelines
• Large storage areas & buildings
• Perimeter detection

Features and Benefits

• Double band pass filters that fully compensate for all types of fog, rain and/mist interference
• 100% Solar Immune
• Correct operation under partial obscuration conditions
• High vibration resilience
• Radially symmetrical and bonded window heating delivers good low temperature performance
• Coaxial optics delivers best in class performance and resilience to partial obscuration
• Fully temperature compensated solid state detectors
• Low power consumption in all conditions
• Simple 'lock on' alignment tool
• No extra 'software alignment' required
• Higher power and more robust design telescope
• Optional Modbus RS485 multi drop output
• FM hazardo

08134-04 TI.31 9 Bottom-Mount Bimetal Thermometer, 3" Dial, 9" L/50-550F/10-290C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

Key Features

• Greater temperature range
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw

Part Number: 116L-463

Part Number: 221L-150A-50

0021-0018 True Spot Smoke Scale by Bacharach

The Bacharach True Spot® smoke test method has long been recognized as the accepted standard for oil burner smoke tests. Testing the smoke content of flue gases takes less than one minute and is easily determined using the smoke scale included with the instrument.

Bacharach's True Spot® is an indispensable part of any oil burner service job. High smoke levels can cause premature failure in the combustion appliance/equipment, can damage relatively expensive electronic combustion analyzers, and can indicate excessive fuel usage.

The Bacharach True Spot® smoke test method has long been recognized as the accepted standard for oil burner smoke tests.

• Accurate smoke readings in less than one minute
• Quickly checks smoke level in flue gases
• Can save combustion equipment and electronic analyzers from soot damage

Part Number: 58L-459

Part Number: 10L-326