All Products

To recharge 5 Gasman units at once. Select power supply option.

93830-65 Type J Ungrounded Industrial Thermocouple Probe, 6" L, 1/2" Connection by Digi-Sense

Thermocouple Probes Assemblies are ideal for use in industrial applications, chemical processes, production lines, ovens, furnaces, and vessels. The probes conductor is made of 20 gauge wire encased by ceramic insulators along with a standard size aluminum protection head. Head features a gasketed cap to seal out dust and moisture and houses a ceramic terminal block with screw terminals. Head has a 3/4" NPT (F) opening on the side for easy connection to electrical conduit. 316 stainless steel thermowells are included in assemble and are ideal for applications where removing of the probe without draining the vessel is necessary.

CS22-713-D CS22 Fixed Transmitter, N-Hexane (C6H14), 0 - 100% LEL, Display / 4-20 mA by GfG

Wherever toxic or flammable gases and vapors must be monitored without requirements for explosion protection, the use of the CS22 is recommended.

Proven and cost-effective

The CS22 works on the principle of chemisorption (CS). Thanks to a wide range of monitorable gases and multiple measurement ranges, the CS22 offers a wide range of uses, from laboratories to industrial applications to refrigeration systems.

Transmitters with electrochemical sensors (EC), are also used with toxic and flammable gases. In contrast, the CS22 is a much more durable and cost-efficient solution. However, the environmental parameters must fit.

Communicates analog and digital

The measured values and status information of the CS22 can be transmitted either analog (4-20 mA or 0.2-1 mA) or digital (RS-485). This allows not only the use in combination with any GfG controller, but also the connection to programmable logic controllers (PLC).

Smart measured value processing

Industry-wide, the trend is towards smart units, such as the CS22, whose integrated electronics process the data already at the measuring point. The linearization of the measurement signal, compensation of temperature influences, detection of malfunctions and information on the next service or maintenance interval are just some of the advantages that result.

Variants for every requirement

The basic version of the CS22 is sufficient for many applications. If a measured value display on site is desired, there is also a variant with display and acoustic alarm.

CS22 Basic variant for a wide range of catalytic sensors
CS22 D with display to show the current measured value

In combination with GfG's powerful controllers, both variants are the right choice for a wide range of gases to be monitored.

F501-S 3-in-1 Fluoride Electrode (built-in temperature sensor) by Apera

The F501-S Fluoride Ion Electrode is the replacement electrode for Apera Instruments WS100/WS200 Fluoride Meter. It's featured with a 3-in-1 combination structure, which provides a convenient user experience and reliable measuring performance. Connector: 8-pin; Cable length: 3 ft.

SPXCDALMB2M Sensepoint XCD Gas Detector, 4 to 20 mA and Modbus output, ATEX/IECEx/Asian approvals, 2 x M20 entries, painted LM25, includes infrared carbon dioxide sensor cartridge 0 to 5.0% v/v, includes nylon weather protection by Honeywell Analytics

Honeywell can trace its company roots back nearly 125 years. What started off as a company dedicated to heating technologies has blossomed into an enterprise dedicated to a variety ofsafety, security, and energy solutions. By integrating the most advanced technologies with intuitive designs, Honeywell has established itself as an industry leader in workplace safety products and gas detection solutions. The company s commitment to advancement and growth help pave the way for innovation and creativity in design. The Sensepoint XCD detection system is the epitome of product advancement. Building on 125 years of industry experience, Honeywell has introduced a comprehensive monitoring system that is reliable, dependable, and state of the art.

Sensepoint XCD

With the Sensepoint XCD detection system, Honeywell provides easy to use, low maintenance sensory devices for monitoring explosive atmospheric conditions in a variety of industrial settings. The Sensepoint XCD system monitors for explosive oxygen gas, toxic gas, and flammable conditions and constantly relays status through transmitters utilizing a simply traffic light LCD system which can be easily seen and understood from a distance.

Superb Versatility

The Sensepoint XCD system provides a catch all-detection system which has worldwide industry approvals and is compliant with all relevant standards. Suited for indoor use as well as the harshest outdoor conditions, the Sensepoint XCD systemis a versatile product for use in any potentially dangerous industrial atmosphere. The unit is available in both stainless steel and aluminum housing options, both of which are resistant to explosions. The XCD transmitter systems are for three separate environmental conditions (flammable, toxic, and oxygen). Each transmitter has a variety of sensors available for use. Each transmitter will automatically recognize the sensor within its category. The plug-in design of the sensors allows users to simply plug the sensor into the transmitter. The transmitter will automatically adjust and configure for the appropriate sensor settings.

Simplicity in Design

The Sensepoint XCD system is easy to install with a simple plug-in design, a built-in mounting system, and comes equipped with versatile wiring receptions to limit compatibility issues for the end user. Once installed, the system utilizes a traffic light type display of green for normal, yellow for warning, and red to alert an atmospheric issue. The maintenance of the system is just as user-friendly with routine maintenance easy and ergonomic enough to be done by one person. The system is also simple enough that it can be used and maintained with little training.

Cost Savings

The Sensepoint XCD system provides a business with cost reductions in both hardware and staffing. The versatile usage and low maintenance of the system reduces the resources needed to monitor conditions and allows personnel to focus on their tasks at hand. The system also provides personnel, and any other parties in the area, peace of mind that their conditions are being constantly monitored for danger and relayed in a way that anyone can detect and bring awareness to dangerous conditions.

MX6-0003P213 MX6 iBrid Multi-Gas Monitor, O2, HC (IR-Propane), Lithium-ion Extended Range Battery, UL/CSA/ATEX/IECEx, Pump, Spanish by Industrial Scientific

The MX6 iBrid® is more than an intelligent hybrid of Industrial Scientific's best monitoring technologies—it's the most adaptable six-gas monitor on the market. With hundreds of possible sensor combinations, and a robust list of available configuration settings, the MX6 iBrid is ready to monitor oxygen, toxic and combustible gas, and volatile organic compounds (VOCs).

As your work changes, so can your MX6 iBrid. It uses five sensor slots to detect up to six gases. Each of those sensor slots accepts a variety of sensors, which means you can use the instrument with a PID sensor one day and an infrared sensor the next. What's more, settings allow you to adapt the instrument's behavior for your application. If you need to use a benzene PID response factor for one application, and butadiene for others, the familiar menu structure will allow you to quickly change settings.

The rugged MX6 iBrid carries our Guaranteed for Life™ warranty and is compatible with DSX™ Docking Stations. With a DSX Docking Station, maintenance is simplified and data becomes more than a spreadsheet filled with logged readings. Proactively manage your gas detection fleet—track trends, know when instrument maintenance will be required, and understand how your MX6 iBrid instruments are being used.

• 24 "Plug-and-Play" field-replaceable sensors including PID and Infrared options
• Up to 6 gases monitored simultaneously
• Simple, user-friendly, customizable, menu-driven navigation
• Five-way navigation button
• Durable, concussion-proof overmold
• Optional integral sampling pump with strong 30.5 meter (100 feet) sample draw
• Full-color graphic LCD is highly visible in a variety of lighting conditions
• Powerful, 95 dB audible alarm

1385P Axial Blower, Plastic Housing, with 25' Hose/Canister, 1/3HP, 120 Volt AC by Pelsue

These axial "Air-Pacs" are blower, hose, and storage canister all- in-one. The models vary from 120 VAC, 60 Hz to 220 VAC, 50Hz; 15' or 25' of hose stored in canister or our special spacemaker hose. All the models are third party certified by CEESI and CSA and all are constructed to CE requirement. The light weight casing are made from a High-Density Polyethylene.

WD-05993-96 Cole-Parmer® Autoclavable pH Probe, Sealed/DJ/Glass; 210 mm by Oakton

These electrodes are designed for insertion in RADIOMETER mountings or Ingold nonpressurized assemblies 761-351, 761-361, and 361CH-361 (12 mm dia.) Sealed, gel-filled, double-junction reference electrodes require no refilling, and offer long-term stability and extend service life.

Length listed in table refers to probe immersion length, which is equal to housing length plus 70 mm (except Ingold 761-31, where immersion length equals housing length plus 50 mm).

20CFO-SWDS 20" Washdown Duty Fan, Stainless Steel Motor, Stainless Steel OSHA Guards and Stainless Steel Blade by Schaefer

Increase productivity and improve work area safety with high performance Schaefer washdown duty air circulators. Designed to withstand frequent washing and for long life in wet and moist environments these fans are ideal for food and beverage processing facilities, kitchens, hospitals and other clean, corrosive or humid environments.

Features and Benefits

• Choice of three sizes: 20", 24" and 30" diameter
• Corrosion resistant electro-polished 304 stainless steel, OSHA compliant guards
• Extremely high airflow compared to competitive offerings
• Pedestals and stainless steel wall mounts available

Blade Choices:

• Stainless Steel: Excellent corrosion resistance. Electro-polished surface for easy cleaning and minimal bacteria growth. Meets USDA, FDA and NSF/ANSI/3-A standards. Rigid enough to be pressure washed while operating.
• Polypropylene: A less expensive option. Excellent corrosion resistance. Excellent tolerance to a broad range of chemicals. Lighter weight. Should not be pressure washed while operating. The only blade choice for anodized aluminum motors.

Motor Choices:

• Stainless Steel: Best for frequent wash downs. IP55 enclosure protection. Meets USDA and NSF/ANSI/3-A standards. 1-phase and 3-phase. 3-phase is VFD compatible. 2-year warranty.
• Epoxy Coated: Very powerful motors. Best for occasional wash downs. USDA and FDA approved corrosion resistant white epoxy finish. IP55 enclosure protection. 1-phase and 3-phase. 1-year warranty.
• Anodized Aluminum: Best for high temperature applications. Only available with a polypropylene blade. IP55 enclosure protection. Class F insulation. Meets UL, CSA and CE standards. 1-phase is speed controllable. 3-phase is VFD compatible. 3-year warranty.

AM-DP0825 8"x25' Duct with Ratchet Strap by Schaefer

Extremely rugged and durable flame retardant ducting for demanding conditions and long life. Single ply PVC vinyl coated polyester fabric with 10 gage spring steel wire helix and external PVC wearstrip. UL 94V-O flame retardant (self-extinguishing); meets NFPA 701 standards.

Part Number: P196910PA

GHS1293LP Class 6.1 Dangerous Goods Laser Drum Labels (Paper), 100/Pkg by GHS Safety

GHS pre-printed drum labels come with your choice of pictogram that meets the UN recommendations on the Transport of Dangerous Goods. These labels make an excellent choice for short production runs or re-labeling of product for transportation. These labels are printed on a Laser Printable Paper or Vinyl stock with a permanent peel and stick adhesive. Use any desktop publishing package to quickly make your own transportation labels. Available in 8.5" x 14" size and packaged in bundles of 100 sheets.