All Products

Part Number: 34L-379S

72-2120-103-5K Digester Gas Monitor, 5000ppm H2S by RKI Instruments

RKI is proud to introduce our Digester Gas Monitor. Gas from waste digesters contains high levels of methane, CO2, and H2S, with little to no oxygen present. The RKI gas monitor checks for all these gases on a cyclic basis. A powerful air aspirator draws a sample from up to 100 feet away. Since digester gas contains high humidity and high H2S, both of which can cause damage to sampling systems, the RKI Digester Gas Monitor is designed to handle these with no damage to the sampling system or sensors. The sample is passed through a series of dirt, dust, and moisture stopping filters, and these filters are automatically purged with fresh air at the end of each cycle.

Measurement time is just 4 minutes, taken at periodic cycles. Cycle time is selectable, with settings for cycle time of 15 minute, 1 hour, 4 hours, 8 hours, or 24 hours. A cycle can also be initiated anytime by pressing a button. After each cycle, the sensors and sampling system are flushed with fresh air so as to minimize corrosion caused by the high H2S content. The system is fault tolerant minimizing the possibility of expensive repairs or downtime.

System integrity is maintained at all times using a flow fail monitoring device which provides a fail alarm and relay if there is ever a problem with the flow system, such as a blockage, or if the air aspirator compressed air supply is removed or interrupted.

The system is housed in a wall mounting NEMA 4X enclosure. The gas readings can be viewed through the enclosure door clear window. Flow meters and filters are easily visible for confirmation of correct flows and operation. The RKI Digester Gas Monitor contains adjustable alarm levels for each gas, and also programmable alarm relays. In addition, the unit provides 4-20mA signals for each gas concentration for connection to an external DCS, PLC, or other site control system. A Modbus output is also available. The outputs are the readings received from the last cycle taken.

Features:

• Corrosion resistant design; Housing designed for extreme environments; Internal construction for extreme samples; Flow system designed to handle corrosive wet samples
• Sample system designed to handle high humidity
• Accurately measures gases with high levels of H2S present
• 100 ft. sample range
• Up to 4 sensors: Methane 0-100% Volume; CO2 0-50% Volume; Oxygen 0-25% Volume; H2S 0-1000 PPM (0-3000 or 0-5000 optional)
• Self draining moisture trap
• Automatic backflush of sampling system
• Long life air aspirator (no moving parts)
• Suitable for inside/outside installations
• NEMA 4X enclosure
• Uses proven RKI technology
• Modular design easy to maintain
• Simple to operate

Industry Applications:

• Wastewater Treatment Digesters
• Biogas Methane
• Animal Farms

*Please note we can only ship RKI products to customers within the United States

81-SDM2009-06 SDM-2009 Single Point Calibration Station for GX-2009 with AC Adaptor, Flash Drive, USB Cable, Tubing, Installation CD, Demand Flow Regulator & 34AL Cylinder H2S (25 ppm)/CO/CH4/O2 by RKI Instruments

RKI's new SDM-2009 calibration station for the GX-2009 is now available with advanced features for charging, calibration, & bump testing. Once you power up the GX-2009 inside the SDM-2009 calibration module, the GX-2009's display will indicate whether it's transmitting data, bump testing, calibrating, as well as the results of the bump test or calibration.

Stand Alone Station

Multi Module System

Stand Alone Station Features

• Stand-alone station (no PC Required)
• Charging
• Calibration
• Bump Test
• Save Bump Test and Calibration records
• Bump test and calibration records copy to USB jump drive
• Includes PC software for viewing/ archiving bump test and calibration records

Multi Module System Features

• Multiple modules connected to a PC (10 max)
• Charging
• Calibration
• Bump Test
• Automatic calibration/bump test option
• Configure GX-2009 parameters
• Archive Bump Test and Calibration records
• Archive data to network location
• Software controlled data retrieval
• Windows 7 compatible

*Please note we can only ship RKI products to customers within the United States

6201-1149 IAM-100 Gas Detector, STD Housing, R407c 0-10,000 ppm, 110 VAC by Bacharach

The IAM-100 Gas Monitor from Bacharach offers exceptional continuos monitoring performance and flexibility at an economical price. By itself, or integrated into a comprehensive detection system, the IAM-100 is a scalable solution for detecting a variety of refrigerants, combustible gases and VOC gas leaks at the lowest possible cost.

Onboard LEDs illuminate when the sensor is in an alarm state while the unit's audible alarm alerts personnel in the area that levels have exceeded the desired limit. The audible alarm can be muted with the onboard silence switch. Integrated dual relays enable the IAM-100 to shut-off refrigerant or propane supply lines while the second relay can be used as a connection to a building BMS or BAS system.

The IAM-100 is an alarm threshold device. When the range of the sensor is exceeded, the detector will go into alarm. For example, a unit with a 1,000 ppm R-410a sensor will activate its alarm when the detected refrigerant meets or exceeds 1,000 ppm.

Features & Benefits:

• Real-time continuous gas detection that's scalable, reliable and affordable
• Ideal for commercial applications such as hotel rooms, apartments, dorms, hospitals, restaurant kitchens or battery charging rooms
• Detects refrigerants (at ?1,000 or ?10,000 ppm), TVOCs (at ?1,000 ppm), combustible gases and hydrocarbons (at ?5,000 ppm)
• Fast-responding, long-life sensors
• Integrated visual LED and audible alarms
• Two onboard relays to activate shut-off valves, exhaust fans, or connect to a BMS or fire panel
• Remote sensor with aesthetic faceplate available for discreet monitoring in decorative interiors

4000-1144 4000 Series Integrated Controller, 10 Channels, 5 Amp Power Supply by GfG

The 4100 one-channel and the 4-channel 4400 gas warning systems offer safe and reliable gas detection

Alarm points

Each alarm can be adjusted separately. False alarms are eliminated with the adjustable alarm delay. The alarm point values can be freely adjusted within the detection range of the transmitter. Every alarm point value can be selected to be latching / non-latching or resettable / non resettable.

Alarm relays

The controller provides four voltage-free relays for the three alarms in addition to one fault warning. The relays may be used to control additional alarm devices like lights or horns. They can even prompt specific counter measures to prevent or limit dangers from gases or vapors.

Additional features

The 4100 control panel stores peak values and offers an additional 4-20 mA output. The 4400 control panel offers the ability to connect up to 4 transmitters and comes standard with an additional 24 VAC output for solenoid control.

Features

• Complete 1-to-4 channel controller / gas monitoring system
• 110 VAC or 24 VAC
• Case-mounted horn / strobe
• Security lock
• Slim-line design

Part Number: SPU310S

Part Number: RRRTC1

37955-12 Traceable® Vane Thermoanemometer with Air Velocity, Temperature, and Calibration by Digi-Sense

The Digi-Sense family of air measuring instruments offers different levels of functionality, allowing you to select the one that best meets your application needs and budget. All models measure airflow and temperature.

The compact meters are designed for intuitive, instruction-free operation and have a Hold button to freeze display readings for easy recording of results. Min/Max readings are also captured. The tough ABS plastic housing and membrane keypad allow the anemometers to be used in harsh environments. A high contrast LCD display with 3/8" digits make it easy to read.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Easy to grip design
• Easy-to-use keypad

Includes

Four AAA batteries and NIST-traceable calibration certificate with data.

WD-18000-31 Ambient CO₂/Temperature/Humidity Data Logger with TraceableLIVE® Wireless Capability and Calibration by Digi-Sense

TraceableLIVE Wireless Technology allows multiple users to stay connected and monitor critical environments 24/7 wherever you go.

Remotely monitor the temperature, humidity, CO₂, or barometric pressure levels of your laboratory, warehouse, greenhouse, and incubator from your personal devices. Continuous data transmission using Wi-Fi provides a simple and reliable way to wirelessly monitor the environment.

Once setup is complete you can securely monitor parameters 24/7, control your alarms remotely, view your data logging history, run reports in real time, and give access to other team members. No local software is required to use the cloud-based data interface. Get mobile push notifications, emails, or texts for temperature alarms, connectivity interruptions, or low-battery condition. Large tripe-line LCD displays ambient and Min/Max readings.

Use the included Velcro® strip to mount the probe to the inside of a freezer. Micro cable on the probe permits freezer door to close on it. Mount the logger to the outside of the freezer with the included magnetic strip or use the built-in bench stand to place on countertop. A large LCD displays probe and MIN/MAX temperatures. A low-cost subscription is required for TraceableLIVE® use.

Plus the NIST-traceable precalibration means you get reliable measurements right out of the box, saving you time and money!

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

*Requires a TraceableLIVE subscription.

For sale only in Australia, Brazil, Canada, China, Europe, India, Japan, Mexico, New Zealand, Singapore, South Korea, and USA.

Includes

Velcro® strip, magnetic strip, wall mount, built-in stand, four AAA alkaline batteries, and NIST-traceable calibration certificate with data.

Model 18000-31 features a dongle with temperature, humidity, and carbon dioxide sensor to measure ambient conditions.

Key Features

• Connect to your data via smartphone, tablet, or PC using TraceableLIVE wireless capability*
• View current conditions anywhere cloud-based interface sends email, text, and push notifications
• No software required web, Android™, Apple® iOS data visibility
• Get accurate, reliable measurements with included NIST-traceable calibration

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

Old Part Number: Z105325MX45
New Part Number: Z105325PM45

059-C110-000 ppbRAE 3000 Portable Handheld VOC Monitor - 10.6 eV Lamp, Li-Ion / Universal Charger by RAE Systems

The compact ppbRAE 3000 is a comprehensive VOC gas monitor and datalogger for hazardous environments. The ppbRAE 3000 is the most advanced handheld VOC monitor available for parts-per-billion detection. This third-generation patented PID device monitors VOCs using a photoionization detector with a 9.8 eV, 10.6 eV UV-discharge lamp.

The built-in wireless modem allows real-time data connectivity with the ProRAE Guardian command center located up to two miles/3 km away (with optional RAELink3 portable modem) from the ppbRAE 3000 detector.

Monitor only includes

• ppbRAE 3000 Monitor, with RAE Systems UV lamp, as specified
• Datalogging with ProRAE Studio II
• Charging/download adapter
• VOC Zeroing Tubes (1 box)
• Tube adapter
• Tedlar® bag for calibration
• Flex-I-Probe™
• External filter
• Rubber boot with straps
• Alkaline battery adapter
• Lamp-cleaning and tool kit
• Operation CDROM
• Operation & Maintenance manual
• Soft leather case

Monitor with accessories kit adds

• Hard transport case with pre-cut foam padding
• Charging/download cradle
• 5 porous metal filters and O-rings
• Organic vapor zeroing kit
• Gas outlet port adapter and tubing

Optional calibration kit adds

• 10 ppm isobutylene calibration gas, 34L
• Calibration regulator and flow controller

Optional Guaranteed Cost of Ownership Program

• 4-year repair and replacement guarantee
• Annual maintenance service

Key Features

• 3-second response time
• Extended range from 1 ppb to 10,000 ppm with best in class linearity
• Humidity compensation with integral humidity and temperature sensors
• Real-time wireless built-in - Bluetooth (and optional RAELink3 portable modem) or Mesh Network support
• Integrated Correction Factors list of 220 compounds more than any other PID
• Includes flashlight for dark conditions
• Large graphic display presents gas type, Correction Factor and concentration
• Easy access to battery, lamp and sensor in seconds without tools
• Rugged housing withstands use in harsh environments
• IP-67 waterproof design for easy cleaning and decontamination

Application

• Oil & Gas
• HazMat
• Industrial Safety
• Civil Defense
• Environmental & Indoor Air Quality

701JF Temperature Magnetic Back Meter, Type J by Jenco

Model 701 is a battery operated thermocouple type digital thermometer that measures approximately 3x2.25x1.13 inches (77x60x30mm). It is available in 6 different configurations of thermocouple calibration with Celsius or Fahrenheit reading.

• All solid state design
• High stability
• Wide temperature range
• cold junction compensation
• Easy to read LCD display
• One conventional 9V battery
• Long battery life
• Interchangeable TC sensor