$50 - $75

Part Number: CGBUMP2

SXL-3 Optical Liquid Sensor, PWM by Agrowtek

Electronic optical liquid sensors are durable, have no moving parts and are easy to maintain. SXL sensors can detect fluid levels in tanks, flow in pipes, or leaks in drip pans when liquid touches the sensor tip. Wide voltage range and high current capacity makes the SXL sensor practical for TTL logic, industrial PLC or direct relay control applications. 1/4" NPT threading and removable wiring terminal block with pin-out cast into the hex head makes installation or replacement fast and simple. When the output is energized a red LED illuminates the sensor body giving a visual status indication. Available in 'wet-on' and 'dry-on' configurations, or PWM output for applications requiring error indication and failure monitoring. Other intelligent functions include "stable state" switching to detect splashing, one-second output debounce and error indication from infrared flooding.

Applications

• Water Tanks
• Coolant Reservoirs
• Hydraulic Fluid Reservoirs
• Warewash Equipment
• Irrigation Systems
• High & Low Level Detection
• Leak & Overflow Detection
• Flow Detection in Pipes
• Automatic Fill/Drain Level Control

Part Number: 10L-289-300

98767-33 Traceable Waterproof Remote Probe Thermometer Ultra with Calibration, ±0.5°C accuracy at tested points; 1 Stainless Steel Probe by Digi-Sense

Water-resistant remote probe thermometer is perfect for wet areas - case is IP61 rated and shockproof, and probe is impervious to acid and solvents. Probe with 10-ft (3-m) flexible cord makes it easy to take temperature measurements in hard to reach areas. Supplied with suction cups, magnet, and hook-and-loop tabs to attach to any surface.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Display updates every second
• Features MIN, MAX, and selectable °F/°C
• Features enhanced accuracy

Includes

probe, cable, suction cups, magnetic strip, hook-and-loop strips, battery, and NIST-traceable calibration certificate with data.

Part Number: 10L-98-150

86460-05 Traceable® Remote-Monitoring Thermocouple Thermometer with Calibration; Celsius by Digi-Sense

This meter has a 4-ft. ribbon micro-cable that allows you to place the probe within an area and close the door without affecting the probe or the door seal. Accurately monitor temperature within freezers, water baths, heating blocks, incubators, refrigerators, and other areas. The meter includes a fast-response type-K probe that can be used for general purpose applications. Users can also choose from a wide verity of probe sold separately for surface, liquid, air or semi-solid materials.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• For use in remote measurement applications
• High-impact, chemical-resistant ABS case

Includes

One beaded-wire type K probe, NIST-traceable calibration certificate with data, leatherette case, and one 9 V battery.

100 EZ One Button Operation DMM by Test Products International

The new TPI 100 automatically switches between AC and DC Voltage as well as resistance measurements. No more guessing what range to switch your meter to. The TPI 100 does it automatically.

Features:

• Automatically switches between ACV, DCV, and ohms (resistance). Benefit: Simple to use. Meter selects function and range, just connect the leads to the device under test.
• Single button operation. Benefit: Easy to use. Enables users with limited knowledge to perform tests safely.
• 0 to 600 volts AC and DC Benefit: Enough range to safely perform measurements
• 10 MΩ internal impedance. Benefit: High impedance prevents inaccurate reading caused by circuit loading.
• Auto power off. Benefit: Increases battery life by turning off the multimeter when not in use.
• 4,000 count display
• Up to 40MΩ
• cULus 61010-1
• CAT II - 1000V, CAT III - 600V
• Includes Test Lead Set, Batteries and Protective Rubber Boot
• 3 Year Limited Warranty

Applications:

• Measure line and control circuit voltages
• Measure resistance of motor windings, transformers, and solenoids
• Make general AC and DC voltage and resistance measurements
• Measure the resistance of elements and electric heater cores
• Test continuity of wiring
• Verify voltage at breakers and outlets
• Use as a back-up meter in your tool box

The 100 comes complete with the following accessories:

• 100 Instrument
• Rubber Boot
• Test Lead Set
• 1.5V Battery
• Instruction Manual

Part Number: 10L-176P-500

90002-01 Traceable Time and Date Digital Thermometer with Calibration; 1 Wire Probe by Digi-Sense

Ideal for monitoring temperature in the lab, home or office. Thermometer includes a remote probe with 6-ft (1.8m) cable to measure outdoor temperature and an internal sensor to measure indoor temperature. Display can be changed to show probe or ambient temperature, time of day, and month/day.

Thermometer can also display the exact time and date when the minimum and maximum temperature occurred. The temperature sensor performs accurately in most environments even including under water. Use rear stand to place unit on table or attach to wall via hook-and-loop strip or the two rear-mounted screw holes.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

Model 90002-01 is designed for general-purpose applications.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Simultaneously displays temperatures and time
• Wire mounting bracket permits easy probe placement
• Features a wire probe

Includes

NIST-traceable calibration certificate with data and one AAA alkaline battery

*Please note we can only ship RKI products to customers within the United States

Part Number: 10L-98-200

*Please note we can only ship RKI products to customers within the United States

94460-15 Traceable® Countdown 1-Channel Digital Stopwatch with Calibration by Digi-Sense

Stopwatch features a dial of preselected count-down durations. Choose from 1, 3, 5, 10, 12, 15, 20, 25, 30, 35, 40, 45, 50, 55, and 60 minutes; or using the push-buttons, set the timer to countdown anywhere from 99 hours to 1 second. Display shows running time remaining to zero. When zero is reached, an alarm sounds for 5 seconds. Select the repeat-cycle mode and the timer will automatically begin to count down again from the programmed time.

Stopwatch also functions as a count-up stopwatch with single-event, lap, and cumulative split timing. Store up to eight timing functions in memory for later recall. Dual display shows two independent countdown timers or two indepedent count-up timers.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Shockproof ABS plastic case is perfect for the lab or field

Includes

NIST-traceable calibration certificate with data, lanyard, and battery.