$400 - $500

015-3002-001 QRAE Plus Calibration Kit by RAE Systems

Kit includes

• Four-Gas Calibration Gas, 34L cylinder (Cal gas contains 50% LEL methane, 20.9% oxygen, 10 ppm hydrogen sulfide, 50 ppm carbon monoxide, balance nitrogen) C-10 regulator
• Constant-flow regulator and calibration adapter
• 2-cylinder hard plastic carry case

Note: Use only for monitors equipped with O₂ / LEL / CO / H₂S sensors

*Please note we can only ship RKI products to customers within the United States

Oscillating Wall Mount for 30" and Smaller Fans, 115V, 60 Hz

Part Number: GAMAXCKDL

6308PT 1/4 DIN Panel Mount pH Single Parameter Analyzer by Jenco

1/4 DIN panel mount pH single parameter analyzer with electrode efficiency display function. Features pH linear or antilog transmitter output, hysteresis control and uninterrupted operation during pH calibration. Has one 4-20mA output, 5 relays and a RS-485 communications interface. Graphical display. 115/230V AC. CE Approved.

• Bright, graphical LCD display, 1.5 x 2.25
• Simultaneous measurement and analysis
• 1/4 DIN watertight, ip65 rated enclosure
• Reversible & isolated 4 to 20ma output with adjustable bandwidth
• Continuous controller / relays operation during calibration
• 4-digit password security protection
• Programmable set point hysteresis
• Automatic temperature compensation
• CE approved
• Built in ISO9001 certified facility
• Membrane keypad with audio feedback
• Power down, non-volatile memory backup
• RS-485 output
• Multiple spst on/off relays
• Embedded self diagnostic program
• High 50/60 hz noise rejection

GAXT-H-2-DL GasAlert Extreme Detector H2S (Extended Range) Yellow by BW Technologies

Designed with durability and comfort in mind, the GasAlert Extreme reliably monitors for any single gas hazard within its wide range of available toxic gas models. With easy on/off operation, this single gas detector offers extended longevity with a two year fi eld-replaceable battery and sensor. Calibration is a simple automatic procedure and is compatible with BW's MicroDock II automatic test and calibration system. A wide range of user options, multilanguage display and datalogging functionality make the GasAlert Extreme an ideal solution for many applications.

• Direct, real-time readings on large LCD
• Operates through consecutive shifts - exceptional battery run-time
• Secure and accurate history with datalogging

Standard features of BW products:

• Continuous LCD shows real-time gas concentrations
• Compact and lightweight design makes it comfortable to wear
• Water-resistant
• Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station
• Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms on start up
• Bright wide-angled visual alarm bars
• Built-in concussion-proof boot

Additional GasAlert Extreme features:

• Equipped with internal vibrating alarm for high noise areas
• Secure and accurate history with datalogging
• Multi-language support in English, French, German, Spanish and Portuguese
• Tamper-proof settings with passcode protection

Part Number: GAXTH2DL

TW20W 20" Oscillating Circulation Fan, White OSHA Guards by Schaefer

Geared for performance, Twister's oscillating motor utilizes highest quality metal gear design for unparalleled strength, greater load capacity and higher accuracy. Whether aimed at a workstation using a standard wall mount or down an aisle or assembly line using a pedestal, Twister provides the versatility and performance needed to improve worker productivity and safety.

The fans meet OSHA safety regulations while delivering maximum air flow in a wide range of hazardous location applications.

Features and Benefits

• Schaefer oscillation technology
• 2-speed high efficiency motor with 10 foot cord
• OSHA compliant guards, available in black or white
• 90° of total oscillation
• 45° of fan head adjustability up or down
• Four sizes 20", 24", 30" and 36" for optimizing air flow needs
• Low noise levels, quieter than conversational voice
• Fixed or portable mounting capabilities
• Two year warranty
• Assembled in the USA

81-1198 RP-3R Pump with 10 ft Hose, 10 inch Probe, and Tapered Red Nozzle for GX-3R by RKI Instruments

The RP-3R are compact, battery operated, motorized sample drawing pumps which attach to either the GX-3R or the GX-3R Pro to change them from diffusion operation to sample drawing operation. The model RP-3R pumps and the GX-3R or GX-3R Pro gas monitor make a complete solution for confined space entry.

The RP-3R is housed in a rugged plastic case with a quick disconnect fitting for hose attachment. It is provided with a 4" tapered red rubber nozzle. A hose and probe are available as optional accessories. Hose lenghts of 10' to 100' are available. The probe is equipped with an internal dust filter and clear body for easy viewing. The RP-3R uses one AA battery and will operate for up to 10 hours in normal mode (higher flow mode) with an optional ECO mode (lower-flow mode) that can last up to 16 hours. The pump quickly and firmly snaps onto the GX-3R or GX-3R Pro gas monitor and is easily removed when sampling is complete. No tools are required.

A push button POWER switch is used to activate the RP-3R, and the POWER LED illuminates when the RP-3R is on. If a low flow condition occurs, the FLOW LED flashes and an audible alarm will sound. The POWER LED flashes if low battery occurs.

Features

• Attaches to the GX-3R or GX-3R Pro in seconds
• Compact and lightweight
• 10 hours of operation in normal mode (higher flow mode)
• 16 hours of operation in lower-flow mode (ECO mode)
• Audible and visual alarms for low flow and low battery conditions
• Pilot light to confirm operation
• Quick disconnect fitting for hose connection
• Hoses available up to 100' length
• Includes 4" tapered red rubber nozzle, AA alkaline battery, and hydrophobic filters
• Rugged and proven RKI reliability
• Two options available (RP-3R or RP-3R Pro)

*Please note we can only ship RKI products to customers within the United States

6011BKA Bluetooth Handheld pH/ORP Meter Kit With Batteries Only by Jenco

Well-designed, Inside and Out

The Basis Portable Series is Jenco's latest iteration of our portable meters and represents a huge step forward for on-location water quality measurements. This series introduces Bluetooth or non-Bluetooth connectivity and a merging of the best features from our other series, which means we double down on reliability, usability and value.

Accurate, Reliable Measurements

• Up to 5Point calibration (pH)
• mV zero adjust (ORP)
• > 1012 Ω input impedance (pH)
• Each and every unit is hand calibrated and QC ed by at least 2 teams.
• CE, RoHS, FCC ID complaint

Improved Usabiltiy

• Clear, large LCD
• Membrane buttons with tactile feedback On-devicememory storage
• 750 point memory with date/time stamp for GLP
• IP67 water-tight housing
• Removable, rugged protective case
• Inclined back for tabletop use

App-Enhanced Productivity

Transfer 750 saved measurement data from meter to app for sharing and further analysis.

Other Meters In This Series

• Single and dual parameter pH, ORP, conductivity, TDS, salinity,dissolved oxygen, optical dissolved oxygen, pH/ORP/EC, pH/ODO.
• Polarographic or optical DO
• Bluetooth and non-Bluetooth models
• With memory storage
• With or without protective case

Kit Includes:

• 6011B - Bluetooth Handheld pH/ORP Meter With Batteries Only
• 600P - pH Electrode, 3-ft Cable, BNC Connector, Max Temp. 60 Deg. C
• 6011AST - Stainless Steel Temperature Sensor, 10K ATC, 1m, 6 PIN
• 6011F - Carrying Case

6350N pH/Conductivity/Salinity/mV/Temp. Handheld Meter with RS-232 by Jenco

The Jenco 6350 is a high performance pH/Conductivity/Salinity/mV/Temp. handheld meter in a splash proof case with an RS-232C interface that allows it to communicate with any IBM compatible PC. This meter is CE approved and features 0.01 pH Resolution and a mV range of ± Salinity is in the range of 0.0 to 80.0 ppt with a 0.0 ppt resolution. Conductivity Cells are selectable for K=1.0 or K=5.0 and ranges are selectable for uS or mS.

• pH buffer recognition: model 6350 (pH:7.00,4.01,10.01) , model 6350c (pH:6.86,4,9.18)
• Selectable 2/4 wire cells for long cable length & wide measurement range
• Store 50 sets of data in non-volatile memory
• Conductivity auto/manual range
• Power down memory backup
• Splash resistant/watertight case
• Audio feedback keys
• Battery/ac adaptor
• RS-232c output

*Please note we can only ship RKI products to customers within the United States

2041001 GMA 41B Single Channel Controller, with Digital LED Display, External Reset Connection and Linear 4-20 mA Output by GfG

Gas Monitoring Controllers

Alarm points

Alarm relays

Features

• Single or four channel controller
• Easy mounting on DIN-rail
• Multiple alarm points with relays

Additional features

The GMA (variant B) offers an integrated BUS-system. The BUS-system supplies power from one source to all connected GMAs. The BUS-system also connects individual controller alarms together so that, with the use of the key-operated switch, all connected monitors have one collective alarm. Several GMAs can be connected easily without additional wiring.

Part Number: M4CKDL