$400 - $500

400520 0407 NIST Calibration Certification Kit for testo 400 Airflow Kit (0563 0407) by Testo

Kits includes:

• NIST Air velocity certificate at 3 standard points (2)
• NIST pressure certificate

PHMA pH Transmitter, 4-20mA, Blind by Sensorex

The Model PHMA (encapsulated miniature transmitter) is a 2-wire, 4-20 mA pH transmitter featuring encapsulated construction, high performance and small size. It can be interfaced with many display and control devices requiring a 4-20 mA input.

The unit is compatible will all SensoreX conventional combination pH electrodes. It transforms the pH signal to a 4-20 mA current proportional to the pH level. This output may be transmitted over two wires to a control location. The same two wires provide power to the transmitter. Any 12 - 36 Volt D.C. power supply may be used. There are two adjustments on the transmitter to standardize probes for "SPAN" and "ZERO". The output can be monitored with a loop-powered meter, a loop resistor or even a multi-meter during the standardization procedure.

• Compact size
• Easy-to-use
• 4-20mA loop-powered
• Adjustable zero and span
• Fully encapsulated

WD-35613-24 pH 6+ Meter Kit, 0 to 100°C Temperature Range, 0.00 to 14.00 pH Range, and ±1999 mV Range by Oakton

Reads pH, mV (for ORP/Redox measurements) and temperature

Achieve professional results at an economical price! The microprocessor-based pH 6+ meter gives you high accuracy and reliability. Use this meter to take pH, mV and temperature measurements. The millivolt readout lets you take ORP readings. Meter includes a protective rubber boot that also acts as a meter stand.

• Automatic Temperature Compensation (ATC)
• All push button operation
• Three-point pH calibration and mV offset calibration
• Auto buffer recognition
• Hold function; Auto-off
• Use with most pH and ORP electrodes with BNC connectors

CS675-C-1-GA-3-A-5-H-2 High Temp & Pressure SS Contacting Conductivity Sensor, CS675HTTC-K=1, P1K, 6" Leads, TL by Sensorex

The Sensorex CS675 High Temperature and Pressure Stainless Steel Contacting Conductivity Sensor is ideal for heavy duty applications. It is made from 316 Stainless Steel and PEEK. It features a single body design intended for high pressure conditions. This sensor also has 2 cell constants (0.1/cm and 1.0/cm). It features 3 options for temperature and pressure ratings ranging from standard to ultra-high (see more details in specification sheet). It also has 2 options for insertion lengths. Certain configurations of this product can be purchased directly from the website. Please contact us to purchase any configurations not shown in the drop down menus above.

Ideal for Heavy Duty Applications

• Made from 316 Stainless Steel and PEEK
• Robust single body design

Multiple cell constants. temperature/pressure ratings and insertion lengths

• 2 options for cell constants: 0.1/cm and 1.0/cm
• 3 options of increasing temperature and pressure ratings
• 2 options for insertion lengths: standard and extended

116ES-421 116 Liter 4-Gas (100 PPM CO, 25 PPM H2S, 2.5% CH4, 18% O2) Ecosmart Refillable Cylinder, Nitrogen Balance by Gasco

Ecosmart is a 116-liter refillable, portable cylinder that delivers 100 percent more calibration gas than the disposable 58-liter cylinders. ecosmart cylinders hold pure and mixed gases and fit comfortably into standard carrying cases. Gasco constantly strives to provide its customers with the most innovative and cost effective products to help grow their businesses.

Features & Benefits

• 116-liter
• Refillable
• 100% more capacity than the standard 34-liter cylinder
• Portable
• Lightweight
• Increases efficiency
• Holds pure and mixed gases
• Same size as 58-liter disposable cylinders
• Eliminates disposal fees and regulatory paperwork

MBVSR-1.0 Belimo Motorized Ball Valves - Spring Return, 1.0", 212°F, 150 PSI Max by Quantrol

MBVSR series spring return motorized ball valves are recommended for cooling tower bleed applications. Powerful LF actuator with 35 inch pounds of torque ensures that the valve open sand closes as required. These standard port valves pass suspended solids more efficiently than solenoid valves, thus are less likely to stick open or closed. Maintenance requirements are reduced and reliability is significantly increased.

• Nickel Plated Brass Valve Body
• Stainless Steel Ball and Stem
• NEMA 2 Actuator Housing
• Motor Open = 40 to 75 Seconds
• Spring Return <25 Seconds
• Open/Close Visual Indicator
• 250° F Max Temperature
• 36", 18 Gauge, 2 Wire Cable

6302-0101 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R134a, 0-1,000ppm, Semi-conductor by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

• Mobile App Interface
• Pre-calibrated Sensors
• Semi-automated Calibration
• Remote Sensor Option
• Temperature-Compensated Measurement
• Low Temperature Performance
• Digital Communications
• Analog Outputs
• Relay outputs
• Audio & Visual Alarms
• Multiple Cable Entries and Terminals

Benefits

• Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
• Fast and easy sensor maintenance. Eliminates need for calibration gas.
• Easy calibration process with mobile app. Generate calibration certificates for documentation.
• Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
• Mitigates false alarms and optimizes accuracy in refrigeration applications.
• Suitable for use in cold rooms and freezers down to -40° F/C.
• Integrate with local BMS/BAS via Modbus RTU
• For current or voltage output to legacy systems (MGS-450/460)
• 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
• On-board alarm notification supports compliance with ASHRAE 15 / EN 378
• Quick and easy installation of all wiring; daisy-chain power and digital communications.

81-1177RK-20 RP-2009 Remote Sample Drawing Pump with 4 Rubber Nipple, 20' Hose and Probe for GX-2009 or GX-2001 by RKI Instruments

The GX-2009 is the smallest 4 gas portable monitor in the world. The RP-2009 is a compact, battery operated, motorized sample drawing pump which attaches to the GX-2009 to change it from diffusion operation to sample drawing operation. Together the model RP-2009 pump assembly and the GX-2009 gas monitor make a complete solution for confined space entry.

The RP-2009 is housed in a rugged plastic case with a quick disconnect fitting for hose attachment, and it is provided with a hose and probe. Standard hose length is 10 feet, and lengths up to 30 feet are available. Then probe is equipped with an internal dust filter and clear body for easy viewing. The RP-2009 will operate for up to 5 hours on one AA battery. The pump quickly and firmly snaps over the sensor area of the GX-2009 gas monitor, and removes easily when sampling is completed. No tools are required.

A push button ON/OFF switch is used to activate the RP-2009, and a green power light is illuminated when it is on. If a low flow condition occurs, from either a flow blockage or a low battery, an red flashing LED is activated and an audible alarm will sound. For added versatility, the RP-2009 pump assembly is also available for use with our model GX-2001 gas monitor.

Features:

• Attaches to GX-2009 gas monitor in seconds
• Compact and lightweight
• Strong motorized pump operates from one AA battery for 8 hours
• Audible and visual alarms for low flow and low battery
• Pilot light to confirm operation
• Quick disconnect fitting for hose connection
• Hoses available up to 30' length
• Includes probe with visible dust filter
• Rugged and proven RKI reliability

*Please note we can only ship RKI products to customers within the United States

GAXT-H-DL GasAlert Extreme Detector H2S Yellow by BW Technologies

Designed with durability and comfort in mind, the GasAlert Extreme reliably monitors for any single gas hazard within its wide range of available toxic gas models. With easy on/off operation, this single gas detector offers extended longevity with a two year fi eld-replaceable battery and sensor. Calibration is a simple automatic procedure and is compatible with BW's MicroDock II automatic test and calibration system. A wide range of user options, multilanguage display and datalogging functionality make the GasAlert Extreme an ideal solution for many applications.

• Direct, real-time readings on large LCD
• Operates through consecutive shifts - exceptional battery run-time
• Secure and accurate history with datalogging

Standard features of BW products:

• Continuous LCD shows real-time gas concentrations
• Compact and lightweight design makes it comfortable to wear
• Water-resistant
• Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station
• Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms on start up
• Bright wide-angled visual alarm bars
• Built-in concussion-proof boot

Additional GasAlert Extreme features:

• Equipped with internal vibrating alarm for high noise areas
• Secure and accurate history with datalogging
• Multi-language support in English, French, German, Spanish and Portuguese
• Tamper-proof settings with passcode protection

Part Number: GAXTHDL

MH-80-OFR 80,000 BTU Radiant Kerosene Heater by Master

Our lineup of MASTER radiant heaters combines forced-air convection heat with radiant heat, warming objects directly. While it takes some time for hot air to mix with cold air, the radiant heat is working as soon as the heat plate starts glowing.

• Half the noise of conventional kerosene forced air heaters
• Ultra portable, lightweight design
• Heavy-duty wheels for easy portability
• Safety overheat shut-off system
• Electronic controls
• Easy-lift handle
• Diagnostics indicator light
• Power on/off switch
• Fuel gauge
• UL certified
• Multi-fuel use
• One year warranty
• Heats like the sun

CP-I-000000M1-Y-00 BW Icon+ Multi-Gas Detector, CO Yellow by BW Technologies

Serviceable four-gas detector with a choice of six sensors — Honeywell BW™ Icon+ delivers an icon-based experience in a serviceable package. It enables you to maximize the lifespan of your four-gas detectors, optimize long-term cost of ownership and select from multiple gas sensors for flexible applications.

ICON DISPLAY FOR FAST DECISIONS

Like the fixed-life Honeywell BW™ Icon, Honeywell BW™ Icon+ is named for its firstin-the-industry display of simple icons for gas levels and device status. That means no live gas readings for workers to interpret and no time-consuming training. Instead, when there's a gas alarm, the bell icon on the display will illuminate, along with an indicator next to the sensor in alarm, so workers can quickly clear the area.

INTELLIGENT SENSORS FOR PREDICTIVE MAINTENANCE

How much life is remaining in the H₂S sensor, based on its age and gas exposure? When does the O₂ sensor need to be calibrated? Honeywell BW™ Icon+ has i-Series intelligent sensors that answer these kinds of questions, so you can take action and prevent unexpected downtime.

REPORTING AND ANALYSIS FROM YOUR SMARTPHONE

Want to see the full concentration of a gas or other information not on the icon-based display? Need to report a gas alarm? Simply download the Honeywell Safety Suite Device Configurator app, use Bluetooth® to pair your smartphone with the detector, and open the app to see the data — all organized in a report that's ready to send.

FEATURES AND BENEFITS

• RELIABLE: Two months of battery runtime on a 4.5-hour charge — and up to four months if you turn off the detector at the end of each shift. No daily charging, no unexpected downtime.
• COMPATIBLE: The Honeywell BW™ Icon+ is compatible with the IntelliDoX instrument management system and Honeywell Safety Suite and also with TouchConnect™ using Bluetooth® for wireless configuration.
• ACCURATE: Low-power infrared LEL sensor is immune to silicone poisoning, which means accurate monitoring of combustibles.
• EASY TO MANAGE: The IntelliFlash™ green light indicates when the detector is in compliance and the amber light indicates the need for maintenance.
• RESPONSIVE: 1series sensors respond to dangerous gas levels in seconds, even in harsh temperatures.
• EASY TO USE: Small, lightweight and wearable. One-button operation.

Part Number: CP-I-000000M1-Y-00

MCXL-X0H0-B-OE GasAlertMicroClip XL Detector, Oxygen (O2), Hydrogen Sulfide (H2S) - Black Housing, OE Version (Other Regions, 2-pin UK plug) by BW Technologies

The easy to wear, slim and compact GasAlertMicroClip provides affordable protection from atmospheric gas hazards. For standard operation with features you can count on, opt for the GasAlertMicroClip XT. For extended battery life, especially in cold weather, choose the GasAlertMicroClip XL. Both offer visual compliance at a glance with the flashing, green IntelliFlash™. Easy onebutton operation reduces training time and lets workers focus on the job at hand. For simple, cost-effective management of your records, calibration and bump testing, choose BW's MicroDock II automatic test and calibration system and Fleet Manager II software.

• Easy and comfortable to wear; thin and lightweight
• Easy operation and straightforward training with one-button simplicity
• Easy visual compliance with flashing, green IntelliFlash™
• Easy and cost effective to own

Additional GasAlertMicroClip features:

• Choose the GasAlertMicroClip XL for cold weather performance
• IntelliFlash™ verifies operation and compliance to both the user and supervisor
• Tamper-proof, one button operation
• Powered by a rechargeable lithium polymer battery

Standard features of BW multi-gas products:

• Continuous LCD shows real-time gas concentrations
• Compact and lightweight design makes it comfortable to wear
• Water-resistant
• Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station
• Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms on start up
• Bright wide-angled visual alarm bars
• Built-in concussion-proof boot
• Multi-language support in English, French, German, Spanish and Portuguese
• Conveniently manage your fleet using Fleet Manager II

Part Number: MCXLX0H0BOE

MC2-00HM-B-NA GasAlertMicroClip Extreme Detector Hydrogen Sulfide (H2S), Carbon Monoxide (CO) - Black Housing by BW Technologies

When purchasing a gas and atmospheric detection device, buyers should evaluate their needs to determine the most appropriate device on the market. At BW Technologies by Honeywell, safety and reliability are top priorities. After years of research and development in gas and hazardous atmosphere detection, BW Technologies has introduced the GasAlertMicroClip XT into the gas monitoring market. Its sleek design and affordable price point place this gas detection system at the top of the market.

When looking for a safe, affordable, and reliable gas monitoring system, look no further than the GasAlertMicroClip XT. The compact and portable design offers the most affordable protection in gas monitoring systems. Using the latest technology, and intuitive user friendly features, users are able to work confidently with knowledge that the GasAlertMicroClip XT will appropriately alert them to possible gas hazards.

Simple design and portability

At approximately 6 ounces, BW Technologies by Honeywell has introduced a safe, reliable, and highly portable gas detection unit. The slender and compact design is met with a bright yellow casing to help ensure that the device is not left behind on the worksite. The casing also helps to make the device water resistant and includes a built in concussion proof boot. In line with its simple design, the GasAlertMicroClip XT features a one button design that is both tamper-proof and intuitive.

Standard features

The exclusive IntelliFlash feature alerts users and those nearby that the GasAlertMicroClip XT is operating and functional. The LCD screen also consistently displays real time gas concentration levels. Like many products developed by BW Technologies, the MicroClip features a standard triple alarm system designed to alert users visually, audibly, and with vibrations. This multifaceted alarm system ensures that users and those nearby are well alerted of possible dangers regardless of visual or hearing impairments, including loud worksites.

Optional features and accessories

The GasAlertMicroClip XT also allows for users to customize certain features. Features such as alarm settings, display settings, test and calibration settings, start-up options, sensors, overrides, and measurements can be manually altered by the user. The MicroClip is compatible with the MicroDock II automatic test and calibration system. Additional accessories can be purchased including auxiliary filter kits, IR connectivity kits, and five unit cradle charges. By allowing users to customize various features and options, BW Technologies is ensuring that its gas detectors will continue to provide value to its buyers for many years.

Specifications

The GasAlertMicroClip XT monitors H2S, CO, O2, and combustible gases at varying measurement ranges. The device is compact at 4.4 inches long by 2.4 inches wide and 1 inch thick and features wide angle alarm bars that indicate alerts from all angles. On activation, the unit will automatically test audible and visual alarms, sensors, battery, and circuitry. The typical batter life is up to 10 hours with a 4 hour recharge time frame. As a testament to its commitment to safety and excellence, BW Technologies by Honeywell also offers a standard 2 year warranty that covers the sensors in addition to the unit.

Part Number: MC200HMBNA

VPESG2 Burst Tone Ultrasonic Sound Generator by Superior AccuTrak

The AccuTrak Sound Generator and the AccuTrak Detector form a non-invasive leak detection system capable of finding leaks in enclosures, such as buildings, vessels, automobiles, walk/reach in freezers, or any other container that needs to be leak-free.

The AccuTrak Sound Generator is used to "pressurize" rooms and enclosures with it's sound. This sound is above the human hearing range, and cannot be heard. It can penetrate through minute cracks, even ones that are not directly behind the leak point, and exit through it. It can thus trace the path air, or water, will take to cause a leak. The AccuTrak Detector receives the ultrasonic sound that escapes from the leak point, processes it and displays it's strength. The bigger the leak is, the higher the volume in the headset.

Applications:

• Buildings
• Roofing
• Automobiles
• Airplane cabins
• Walk/reach in freezers
• Any vessel that needs to be leak free!

Features:

• Burst Mode: If the background noise is extremely loud in a particular area, using Burst Tone will make the output of the sound generator much easier to identify.

Part Number: 58L-252-10