$400 - $500

Part Number: CP-MPCB1

S011843 ASU Air Sampling Unit - for Xgard by Crowcon

The Air Sampling Unit (ASU) is designed to be used with Crowcon s Xgard range of detectors for monitoring potentially hazardous gases within ventilation ducts.

Features:

• Enables air ducts to be monitored without requiring the detector to be mounted within the duct.
• Avoid sensor drift due to air-flow effects.
• Simple, easy to install design.
• Simple detector maintenance: there is no need to access the duct for calibration purposes.
• Extremely reliable; ASU has no moving parts.

S01088 86ASU Air Sampling Unit - for TXgard-IS by Crowcon

The Air Sampling Unit (ASU) is designed to be used with Crowcon s Xgard range of detectors for monitoring potentially hazardous gases within ventilation ducts.

Features:

• Enables air ducts to be monitored without requiring the detector to be mounted within the duct.
• Avoid sensor drift due to air-flow effects.
• Simple, easy to install design.
• Simple detector maintenance: there is no need to access the duct for calibration purposes.
• Extremely reliable; ASU has no moving parts.

Optimal Single-Gas Detection With Next-Generation Technology

Practical to Use

Small and lightweight, the Honeywell BW™ Solo is convenient, functional, and easy to use in any work environment.

Low Cost, Long Life

The Honeywell BW™ Solo design allows for easy replacement of sensor filters, batteries, and sensors. Just pop off the panel door – no need for special tools.

Common and Exotic Gas Sensors

In power and petrochemical plants, as well as in manufacturing or other industrial environments, the Honeywell BW™ Solo offers the right sensor for the job. Both common and exotic gas sensors are included with the detector, including:

• Hydrogen sulfide (H₂S)
• Carbon monoxide (CO)
• Sulfur dioxide (SO₂)
• Hydrogen (H₂)
• Oxygen (O₂)
• Ozone (O₃)
• Phosphine (PH₃)
• Ammonia (NH₃)
• Chlorine (Cl₂)
• Nitrogen dioxide (NO₂)
• Hydrogen cyanide (HCN)
• Ethylene oxide (ETO)
• Phosphine (PH₃)
• Nitrogen oxide (NO)
• Chlorine dioxide (ClO₂)

Maximizing Safety With The 1-Series Sensor

The Honeywell BW™ Solo is the first portable, single-gas detector to come with the 1-Series sensor. This is a proven performer in even the most difficult conditions, and with next-generation technology, the 1-Series sensor is the right choice.

Faster Reading and Response

Currently, the 1-Series sensor is available for use with CO, H₂S, and O₂, with additional sensors for other gases soon available. It has a square design, about one-third of the size of other sensors, making it both effective as well as streamlined.

Exceptional Life

With typical exposure to gas, the 1-Series sensor can last up to five years without any need for replacement and downtime for the equipment. It also offers a three-year warranty, providing peace of mind with the purchase.

A Honeywell Company Product

The 1-Series sensor was designed and developed by the Honeywell company, City Technology. With over four decades of sensor manufacturing experience, they are also the company responsible for the 40xLL and the 40XV oxygen sensors used in the Honeywell BW.

Reliable Performance

Tired of nuisance alarms and unreliable readings? These are the thing of the past with the Honeywell BW™ Solo, which is proven in harsh, humid, and transient pressure environments, as well as in temperatures from -40°C to 60°C.

Keep Sensor Downtime Low

Need to change out the sensor? This is a simple, easy, and very quick task - just remove the old sensor and drop in the new, no need to expose the sensor printed circuit board or internal component.

Streamline Your Fleet and Centralize Data Management

The IntelliDox Advantage

The IntelliDox dock is designed to hold the detector and automatically transfer the data and test results. It can also be configured to perform any desired actions automatically, increasing efficiency. These actions include:

• Bump tests and reminders
• Calibration
• Modification of set points
• Firmware updates

Data about peak readings and alarms are transferred to a computer from the IntelliDox by Ethernet or USB connection. Grouping up to five IntelliDox still allows for individual use, while each dock has its own LCD screen, keypad, and pump. Grouped IntelliDox share calibration gas and power for ease of operation.

Centralize Compliance Made Simple

Utilize the Power of the Cloud

Choosing to subscribe to Honeywell SafetySuite Device Manager cloud-based system allows you to:

• Access information from any internet-connected device
• Receive immediate alarm notification via email or text
• Monitor the entire system through easy to navigate dashboards, even with multiple sites
• Obtain the reports you need
• Boost compliance across all workplaces

The Power of the Mobile App

The app can be used in the configuration, alarm setup, firmware updates, and the control of the detector from up to 6 meters using Bluetooth Low Energy (BLE) technology.

The app allows you to review bump and calibration data, to see the last gas tested and who ran the test, as well as to see the actual readings. This information can be placed on a certificate and emailed to the necessary stakeholders, all from the app.

Send Data to a Desktop Without IntelliDox

The use of BLE allows the wireless transfer of data from the Honeywell BW™ Solo to a desktop without the need for a docking station. This is an ideal option for a larger fleet, eliminating the need for docking stations.

Worker Safety is First

The Honeywell Safety Communicator app allows access to vital information without the need for docking. This provides gas readings and other vital data to monitoring software in real-time. Safety and fleet managers can access this information from any internet-connected device from any remote location.

Working Towards Full Safety and Compliance Across the Workplace

Easy Field Operation

The Honeywell BW™ Solo is designed to work in all types of environments. This includes one-button operation of the detector, eliminating the need to remove safety gloves to complete the test. The Honeywell SafetySuite Device Configurator can also be used to control the detector and set all parameters. It also provides data on short-exposure limit (STEL) and time-weighted average (TWA) as well as the peak gas concentration in the last 24 hours.

Visual Safety or Non-Compliance Confirmation

Are you tired of trying to see if a detector is in compliance or not in compliance? The Honeywell BW™ Solo makes this easy with flashing green lights to indicate bump testing and correct monitoring.

Red flashing lights means the detector is not in compliance, which could indicate a battery replacement is needed or the system needs calibration, a bump test, or these has been a gas event.

Auditory Alarms

The load and audible alarm and vibration of the Honeywell BW™ Solo are coupled with a ring of red LEDs around the detector, making it easy to see if an alarm has been trigged in any environment.

Simplicity and Sophistication for Use and Configuration

Know your worker's location

The Honeywell BW™ Solo can be assigned to a specific worker or a location for immediate information on the use of the detector in the event of a gas event.

Peak Reading Data For A Rolling 24-Hours

Peak readings of specific gases that may not reach the alarm threshold are still important to record. The Honeywell BW™ Solo offers a 24-hour rolling peak reading, allowing for early detection of problem areas.

Multiple Language Display

The Honeywell BW™ Solo can be configured to display gas readings in real-time in major languages, including English, Spanish, French, Russian, Korean, Japanese, and many more.

Part Number: BWS-XL-Y

*Please note we can only ship RKI products to customers within the United States

CP-I-0000H100-Y-00 BW Icon+ Multi-Gas Detector, H2S Yellow by BW Technologies

Serviceable four-gas detector with a choice of six sensors — Honeywell BW™ Icon+ delivers an icon-based experience in a serviceable package. It enables you to maximize the lifespan of your four-gas detectors, optimize long-term cost of ownership and select from multiple gas sensors for flexible applications.

ICON DISPLAY FOR FAST DECISIONS

Like the fixed-life Honeywell BW™ Icon, Honeywell BW™ Icon+ is named for its firstin-the-industry display of simple icons for gas levels and device status. That means no live gas readings for workers to interpret and no time-consuming training. Instead, when there's a gas alarm, the bell icon on the display will illuminate, along with an indicator next to the sensor in alarm, so workers can quickly clear the area.

INTELLIGENT SENSORS FOR PREDICTIVE MAINTENANCE

How much life is remaining in the H₂S sensor, based on its age and gas exposure? When does the O₂ sensor need to be calibrated? Honeywell BW™ Icon+ has i-Series intelligent sensors that answer these kinds of questions, so you can take action and prevent unexpected downtime.

REPORTING AND ANALYSIS FROM YOUR SMARTPHONE

Want to see the full concentration of a gas or other information not on the icon-based display? Need to report a gas alarm? Simply download the Honeywell Safety Suite Device Configurator app, use Bluetooth® to pair your smartphone with the detector, and open the app to see the data — all organized in a report that's ready to send.

FEATURES AND BENEFITS

• RELIABLE: Two months of battery runtime on a 4.5-hour charge — and up to four months if you turn off the detector at the end of each shift. No daily charging, no unexpected downtime.
• COMPATIBLE: The Honeywell BW™ Icon+ is compatible with the IntelliDoX instrument management system and Honeywell Safety Suite and also with TouchConnect™ using Bluetooth® for wireless configuration.
• ACCURATE: Low-power infrared LEL sensor is immune to silicone poisoning, which means accurate monitoring of combustibles.
• EASY TO MANAGE: The IntelliFlash™ green light indicates when the detector is in compliance and the amber light indicates the need for maintenance.
• RESPONSIVE: 1series sensors respond to dangerous gas levels in seconds, even in harsh temperatures.
• EASY TO USE: Small, lightweight and wearable. One-button operation.

Part Number: CP-I-0000H100-Y-00

8327613 Pac 6500 H2S (US) by Draeger

The robust Draeger Pac® 6500 is your reliable companion under tough conditions. The personal single-gas detection device measures CO, H₂S, SO₂ or O₂ quickly and precisely. Quick sensor response times and a replaceable battery also ensure safety.

Strong performance for maximum safety

You can rely on the Draeger Pac 6500: the personal single-gas detection device warns against hazardous concentrations of carbon monoxide, hydrogen sulfide, sulfide dioxide or oxygen with precision and reliability.

Powerful sensors with a very low t-90 response time ensure quick reactions. The Pac 6500 is versatile thanks to its wide measurement range. For example, the CO sensor measures concentrations from 1 to 1,999 ppm, and the H₂S sensor from 0.4 to 100 ppm.

Easy handling thanks to clear user guidance

The D-Light indicates whether functionality of the device has been tested and whether it is ready to use. The housing is also designed with your safety in mind: each sensor variant of the Draeger Pac 6500 features clearly visible color coding, thereby minimizing the chance of mistakes.

Robust design – even for the toughest conditions

The Pac 6500 is easily handled in even extreme conditions. Depending on the sensor, temperatures from -40 °C to 55 °C and air pressures between 700 and 1,300 mbar can be tolerated.

A membrane filter protects the sensor from foreign matter such as dust and liquids. The shock-proof, chemical-resistant housing meets the requirements specified in the IP68 standard rating.

User-friendly display with all important information

The large display clearly indicates the respective gas concentration. Other important information, such as the battery capacity, is also displayed. The bright backlighting ensures that all values are clearly legible in the dark.

360° alarm with various functions

If the Draeger Pac 6500 measures hazardous gas concentrations, it sets off an audible, visual and perceptible vibrating alarm. Two bright, flashing LEDs on the top and bottom of the device ensure that the alarm is easily visible from all sides. The acoustic signal reaches a volume of 90 dB. The display can show the peak concentration measured at any given moment. Earlier alarms registered can also be retrieved at a later time, even if they have been acknowledged.

The Pac 6500 with oxygen sensor has two additional alarm thresholds in addition to the standard alarm threshold settings. This provides an additional level of safety as a pre-alarm, in addition to the main alarm, can be set for both oxygen enriched and oxygen deficient atmospheres.

Data logger and event logger for analyses and reports

The Draeger Pac 6500 logs concentrations and events along with the date and time. The data can be loaded on a PC via an interface and processed further there.

Economical operating costs

All versions of the Pac 6500 are equipped with extremely durable DraegerSensors and a powerful battery.

The Pac 6500 is protected against water, dust and other foreign bodies by a special membrane filter. When the filter becomes heavily soiled in use, you can quickly and easily replace it yourself. The device is then ready to use again right away.

Fast function test saves time and money

Function tests and calibrations can be carried in the Draeger X-dock® calibration station. The automatic bump tests in the X-dock are a cost-efficient and convenient solution thanks to the short test duration and the extremely low consumption of test gas. The Pac 6500 is simply placed in the bump test station and automatically selects the correct setting.

GAXT-H-DL-B GasAlert Extreme Detector H2S Black by BW Technologies

Designed with durability and comfort in mind, the GasAlert Extreme reliably monitors for any single gas hazard within its wide range of available toxic gas models. With easy on/off operation, this single gas detector offers extended longevity with a two year fi eld-replaceable battery and sensor. Calibration is a simple automatic procedure and is compatible with BW's MicroDock II automatic test and calibration system. A wide range of user options, multilanguage display and datalogging functionality make the GasAlert Extreme an ideal solution for many applications.

• Direct, real-time readings on large LCD
• Operates through consecutive shifts - exceptional battery run-time
• Secure and accurate history with datalogging

Standard features of BW products:

• Continuous LCD shows real-time gas concentrations
• Compact and lightweight design makes it comfortable to wear
• Water-resistant
• Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station
• Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms on start up
• Bright wide-angled visual alarm bars
• Built-in concussion-proof boot

Additional GasAlert Extreme features:

• Equipped with internal vibrating alarm for high noise areas
• Secure and accurate history with datalogging
• Multi-language support in English, French, German, Spanish and Portuguese
• Tamper-proof settings with passcode protection

Part Number: GAXTHDLB

1003-25 "Pistol Grip" Electric Deadman Remote Control Switch with 25' Electric Cable by Western Technology

The most advanced 2-WIRE SEALED ELECTRIC DEADMAN CONTROL on the market. Suitable for any electric remote control system, the 1003 Pistol Grip is designed specifically for fueling with ergonomic, trigger-activated pistol grip design for operator comfort and improved safety.

Features

• All polyurethane construction (rubber-like material)
• Sealed body
• Two-wire system
• Suitable for any electric deadman remote control system
• Advanced ergonomic, trigger-activated pistol grip design for operator comfort and improved safety
• Preferred by contractors worldwide for maximum safety and reliability in extremely harsh conditions
• Designed specifically for fueling
• NEMA 4 rated for wet or dry locations
• Built to order
• UL Listed switch
• Ideal for indoor or outdoor use
• Additional options include: coiled cord, Extreme Cable, sparkproof cable reels, made to order cable length, wireless configuration

1003 "Pistol Grip" Electric Deadman Remote Control Switch by Western Technology

The most advanced 2-WIRE SEALED ELECTRIC DEADMAN CONTROL on the market. Suitable for any electric remote control system, the 1003 Pistol Grip is designed specifically for fueling with ergonomic, trigger-activated pistol grip design for operator comfort and improved safety.

Features

• All polyurethane construction (rubber-like material)
• Sealed body
• Two-wire system
• Suitable for any electric deadman remote control system
• Advanced ergonomic, trigger-activated pistol grip design for operator comfort and improved safety
• Preferred by contractors worldwide for maximum safety and reliability in extremely harsh conditions
• Designed specifically for fueling
• NEMA 4 rated for wet or dry locations
• Built to order
• UL Listed switch
• Ideal for indoor or outdoor use
• Additional options include: coiled cord, Extreme Cable, sparkproof cable reels, made to order cable length, wireless configuration

Part Number: DOCK201N

SPSTAXF1 Sensepoint Detector with Junction Box, 0-100%LEL Methane by Honeywell Analytics

The Sensepoint range of flammable, toxic and Oxygen gas detectors offers users a cost-effective solution to their gas monitoring needs, in or out of doors and even in potentially explosive atmospheres. Supplied with a pre-wired junction box, this detector can be installed using conduit or armoured cable and glands depending on the specific needs of the application.

Sensepoint flammable and toxic gas detectors are designed for use in potentially explosive atmospheres, and allow for easy access to terminals via the hinged lid of the junction box. Installation should follow national guidelines using suitably approved armoured cable and glands or conduit.

Supplied with an earth continuity plate for increased resistance to the effects of RFI, the junction box offers the installer a choice of 1/2", 3/4" and M20 connection via conduit or armoured cable and Ex e certified cable glands. Terminals are suitable for use with screened 0.5mm2 (20AWG) to 2.5mm2 (14AWG) cross sectional area cable, as needed to ensure minimum operating voltage at the detector, depending upon installed cable length.

Sensepoint flammable, toxic and Oxygen gas detectors are designed for direct connection with the Honeywell Analytics' range of Touchpoint controllers.

One-Stop Shop

• Flammable, toxic and Oxygen versions available
• Suitable for indoor or outdoor use
• IP65 as standard

Proven Sensor Technology

• Surecell™ electrochemical sensors
• Poison resistant catalytic bead
• Fast and reliable
• Typical 2 to 5 years operational life

ATEX Certified

• Complies with the latest European standards
• Hazardous area and performance approvals
• Can be used for uncertified applications

Easy to Use

• Factory set operation
• Simple sensor replacement
• Minimal training required

Friendly Installation

• Universal junction box
• One box, three entries
• Metric and NPT compatibility
• Includes earth continuity plate for enhanced protection against RFI

Range of Accessories

• Weather Housing (IP66)
• Flow adaptor
• Collecting cone

*Please note we can only ship RKI products to customers within the United States