$400 - $500

T4-ZOCZ-DE-CRD T4 Personal Gas Monitor, 2 Gas - O2, CO, Alternate Alarm Levels / Certifications, Cradle Charger by Crowcon

T4 integrates innovative safety features and an intuitive, rugged design to provide advanced protection for those working in harsh environments. This portable multigas detector, which is exceptionally easy to use and service, protects against the four most prevalent gas hazards: carbon monoxide (CO), hydrogen sulphide (H₂S), flammable gases and oxygen (O₂) depletion.

Features

• TWA resume function - unique to T4, this innovative feature ensures toxic gas exposure is calculated accurately over an entire shift, even if T4 is switched off for a break or during travel to another site.
• 18 hour battery life - safely work multiple or longer shifts between charges, covered by the 18 hour battery life.
• Backlit display - large, clear display with backlight and option to flip the screen 180° for easy viewing while worn.
• Rugged design - with a thick anti-shock rubber casing and drop-tested to 13.1 feet on concrete, T4 provides dependable operation under the most demanding use.
• Water & dust-resistant to IP65 & IP67 - provides protection in the harshest environments.
• Dedicated sensors - one sensor for every gas ensures effective, fast and reliable detection.
• Positive safety indicator - a simple 'traffic light' status indicator which, at a glance, provides visual assurance of operational and compliance status to both users and supervisors. Green light - Working safely. Red light - Attention required
• Intrinsically safe - ATEX approved and UL Class 1 Div 1 for safe operation in a wide range of hazardous environments.
• Multiple alarms - audible 95dB alarm, bright red/blue LED's and vibrating alerts provide effective warning to gas hazards.
• Easy operation - large single button and intuitive menu system minimize training and allow easy operation while wearing gloves.

10076719 Altair Pro Single Gas-Detector Alternate Set Point Models - Carbon Monoxide (CO) by MSA

When working in settings with hazardous gases or fluctuating oxygen levels, the available gas detection devices can be detrimental to health and safety. Workers in these situations need a gas detection unit that is reliable, accurate, safe, and cost efficient. Altair Pro Single-Gas Detector is built to the superior safety and quality standards of MSA and is available worldwide.

Rough and tough exterior

Design simplicity

Altair Pro Single-Gas Detector standard features

The Altair Pro Single-Gas Detector is also compatible with the Remote Oxygen Detector application. The remote oxygen sensor is designed to be lowered into remote locations by a 10 foot cable and monitor oxygen levels, further reducing unnecessary risk. The Pro Single-Gas Detector is also compatible with many other MSA products. For testing and calibration, the Altair QuickCheck Station provides an easy and cost-efficient way to perform daily tests for gas monitoring and alarm functioning. For more complete and automatic calibration and record-keeping, use the Altair Galaxy Automated Test System.

Specifications

M001-0069-000 UNI MP100 Single Gas Detector, ETO , Measuring Range: 200 ppm, Resolution: 0.1 ppm by mPower Electronics

The UNI MP100 offers a simple, personal protection for a wide array of toxic gas and oxygen (O2) measurement applications. In addition to common sensors such as carbon monoxide (CO), hydrogen sulfide (H₂S), nitrogen dioxide (NO₂), ammonia (NH₃) and sulfur dioxide (SO₂), we offer less-common sensors including chlorine (Cl₂), chlorine dioxide (ClO₂), phosgene (COCl₂), hydrogen chloride (HCl), arsine (AsH₃), phosphine (PH₃), ozone (O₃), methyl mercaptan and ethylene oxide. Special oxygen monitors are available with long-life lead-free sensors or with inverted alarms for inert gas applications. The monitors have a large LCD providing maximum readability in the field and are made with six bright red LEDs allowing for quick alarm notification. Constructed of strong and durable material, the UNI is designed to be comfortable, yet drop-resistant. The UNI series can easily be bump tested and calibrated with the mPower CaliCase System.

Features, Functions and Benefits

• 50% larger (AA versus 2/3 AA) Lithium Battery
• Widest choice of sensors on the market
• Large display
• 50 Event datalogging
• Low cost of ownership
• Smart sensors
• Solid stainless-steel alligator clip
• Durable housing
• Fast calibration & download using docking station
• UL Classification Class I, II, III, Groups ABCDEFG

*Please note we can only ship RKI products to customers within the United States

M001-0006-000 UNI MP100 Single Gas Detector, NH3 Ammonia, Measuring Range: 100 ppm, Resolution: 1 ppm by mPower Electronics

The UNI MP100 offers a simple, personal protection for a wide array of toxic gas and oxygen (O2) measurement applications. In addition to common sensors such as carbon monoxide (CO), hydrogen sulfide (H₂S), nitrogen dioxide (NO₂), ammonia (NH₃) and sulfur dioxide (SO₂), we offer less-common sensors including chlorine (Cl₂), chlorine dioxide (ClO₂), phosgene (COCl₂), hydrogen chloride (HCl), arsine (AsH₃), phosphine (PH₃), ozone (O₃), methyl mercaptan and ethylene oxide. Special oxygen monitors are available with long-life lead-free sensors or with inverted alarms for inert gas applications. The monitors have a large LCD providing maximum readability in the field and are made with six bright red LEDs allowing for quick alarm notification. Constructed of strong and durable material, the UNI is designed to be comfortable, yet drop-resistant. The UNI series can easily be bump tested and calibrated with the mPower CaliCase System.

Features, Functions and Benefits

• 50% larger (AA versus 2/3 AA) Lithium Battery
• Widest choice of sensors on the market
• Large display
• 50 Event datalogging
• Low cost of ownership
• Smart sensors
• Solid stainless-steel alligator clip
• Durable housing
• Fast calibration & download using docking station
• UL Classification Class I, II, III, Groups ABCDEFG

Weight: 8 lbs.

708 Combustion Efficiency Analyzer with Flue Probe by Test Products International

The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO₂ (nitrogen dioxide) and NOX (combination of NO and NO₂) to prevent cross sensitivity errors.

Use TPI analyzers to test flue gases in gas and oil fired equipment including high efficiency furnaces and condensing boilers. Measure CO, O₂, and stack temperature.

Determine combustion efficiency, CO₂, and CO air free. Some models include built-in differential manometer, combustible gas detection, PC communication, data logging, and can measure NO / NOX.

Features

Using TPI analyzers to determine combustion efficiency at the time of equipment set up minimizes call backs and can be used to verify to the home owner the value of service work by showing the increase in equipment efficiency after work is performed. Efficiency calculation can also be used to generate business by demonstrating the need to improve the efficiency of equipment or to show the benefit of purchasing new equipment with higher efficiency.

Quick And Simple Set Up

All TPI analyzers feature quick and simple set up. Fast purge and the ability to perform fuel selectionduring start up enable tests to be performed quickly without requiring extra set-up time after initial startup. TPI analyzers also use the last selected fuel as the default setting. This feature prevents the need toperform fuel selection every time the analyzer is turned on.

• Measure CO, and temperature
• Calculate CO2, efficiency, excess air, and CO air free
• Pump driven for fast response
• Will not shut off if 15 ppm CO is present for increased safety
• Ten selectable fuels: Natural Gas, LPG, Light Oil, Heavy Oil, Bituminous Coal, Anthracite Coal, Coke, Butane, Wood, Bagasse
• Optional A740 IR printer available for hard copies of test results
• Built-in differential thermometer
• Store function to save up to 50 readings
• Large easy to read backlit display

Applications

• Tuning of residential and furnaces and domestic boilers
• Ambient and stack testing for CO
• CO safety measurements in and around combustion sources
• Temperature checking, including superheat and hydronic differential temperatures

Part Number: 116L-402E

18100060-1-CNMA Gasbadge Pro Single Gas Monitor, CO - with China MA approval by Industrial Scientific

Built to Industrial Scientific's highest quality and reliability standards, GasBadge® Pro provides a lifetime of gas hazard protection with more features than any other single gas monitor available. Interchangeable "smart" sensors enable the GasBadge Pro to be quickly adapted to monitor unsafe levels of oxygen or any one of the following toxic gases: carbon monoxide, hydrogen sulfide, nitrogen dioxide, sulfur dioxide, chlorine, chlorine dioxide, phosphine, ammonia, hydrogen cyanide and hydrogen. GasBadge Pro communicates directly via an infrared interface to optional accessories like the DSX Docking Station, Datalink and infrared printer to further simplify and automate calibration, function (bump) testing and data downloading. Standard STEL and TWA readings, and datalogging of up to one year of survey data are featured along with an event-logger that records the past 15 alarm events.

Housed in a rugged enclosure, the monitor is immune to RF, water resistant and extremely durable. A protective concussion-proof overmold protects the unit from extreme abuse in a variety of harsh industrial environments. It's simple and intuitive four-button navigation allows easy access to setup, operation and calibration functions.

• Interchangeable "smart" sensors monitor oxygen or any one of many toxic gases
• One-year data logging capacity (minimum)
• Standard STEL and TWA
• iNet® ready and DSX™ Docking Station compatible

0563 8314 830-T4 IR Thermometer Kit with Surface Probe and Pouch with Belt Clip by Testo

This universal infrared thermometer is designed to perform fast and accurate surface temperature measurements in the HVAC area and industry. At a distance of 1 m the point diameter is only 3.6 cm. From a secure distance even smaller, difficult to access or dangerous targets can be measured without any problems. The new high resolution processor enables measurement results of unbelievable accuracy. And due to the min./max. function you can define your temperature limit values according to your needs. To control the limits with the help of an audible and visual alarm has never been easier.

Kit includes:

• Infrared thermometer with protective leather case
• Cross-band surface probe (0602 0393)
• Batteries
• Factory calibration certificate

• 30:1 optics for measuring temperature at a distance, even on small objects
• 2-point laser for spot sighting
• Display of current value and Hold value
• Emissivity determination with external temperature probe
• Audible and optical alarm when limit values are exceeded
• Fast measurement value recording at two measurements per second
• Display illumination
• °C contact measurement with connectable TC probe
• Input of upper and lower limit value

WD-03316-70 Aneroid Barometer, inches mercury by Oakton

Our high-quality barometers are ideal for measuring impending weather changes

These barometers accurately measure atmospheric pressure from sea level up to 2000 feet. They also simultaneously monitor temperature with a built-in glass thermometer. Bimetallic temperature compensation preserves pressure reading accuracy at any temperature. They feature an attractive brass case and include a bezel for easy bulk-head mounting.

• Bimetal element provides temperature compensation for aneroid capsule
• Needs no batteries or external power
• Choose from mbar/mm Hg or mbar/inches Hg models

Part Number: 116L-490T

RSG-RL10N-G Protege SG Reusable Single Gas Monitor, Red, Chlorine Sensor by 3M

The Protege SG is a reusable single gas monitor that can be configured to detect 13 gases which provides maximum flexibility to deal with unknown gas hazards. With interchangeable smart sensors, the Protege SG offers maximum versatility in a reusable solution.

Maximum Flexibility:

The plug-and-play swappable smart sensors allow a single monitor to detect several different toxic and combustible gases, supporting multiple applications. Users can change sensors on the go and the monitor will automatically recognise the sensor type and update the gas label on the display. The versatility of the SG allows users to efficiently manage their time. No programming is required when switching sensors.

Easy to Use:

With one-button activation, adjustable alarm settings and an easy-to-read, multi-language display, the Protege SG is intuitive and user-friendly. Turn it on, and the monitor does the rest. With data logging of up to 5,000 events and a customisable LCD display capable of displaying real-time gas readings, the Protege SG is packed with features and functionality, but requires minimal training. The Protege SG is highly versatile and allows the user to configure the monitor based on their application or specific company requirements.

Durable and Reliable:

The Protege SG is available in IP66/67 ingress protection. Using a Lithium replaceable battery provides service life of 1.5 to 2 years for toxic sensors. The sturdy case can withstand the rigours of most industrial environments and is reliable in operating temperatures of -20°C to +50. The Protege SG performs self-diagnostics at start-up giving users confidence to focus on the job. Turn it on and forget about it.

Sensors:

Sensor Options: H₂S, CO, O₂, O₃, HCN, NO, NO₂, PH₃, SO₂, NH₃, Cl₂ and ClO₂.

*Please note we can only ship RKI products to customers within the United States

GS-CS-B-068-G Gasman Single Gas Monitor, 0-500ppm Carbon Monoxide (H2 filtered), Non Rechargable Battery (single use), Br Port Safe Area only by Crowcon

For over 40 years, Crowcon Detection Instruments has produced state of the art gas detection devices for personal and industrial use. Building upon their reputation for reliable and innovative gas monitoring products, Crowcon introduces the Gasman personal gas monitor. Its lightweight and compact design is convenient for jobsites where workers need not be weighed down by excessive bulk and equipment. The unit conveniently clips to a pocket or helmet and operates continuously.

The Gasman personal gas monitor has numerous convenient features such as:

• One button technology
• Backlit LCD display
• Durable polycarbonate casing
• Quick response triple alert system
• Compact and lightweight design

Easy to Use

The Gasman s true one button technology is an ideal and simple design. The large glove friendly button is mounted on the front of the unit for easy access and controls all of the unit s programmable features. Also on the front, the Gasman s easy to read backlit LCD screen indicates gas readings and the battery status. The simple screen provides a clear indication of the unit s operation status. It will also alert the user 30 days in advance of when a calibration test is due. With a simple and intuitive design, Crowcon has produced a gas detector that reduces the complexities of workplace safety, and ensures workers in a straightforward manner that their equipment is on and operational.

Triple Alarm System

This portable single gas detection system features a triple alarm system that is sure to alert the user and anyone in the vicinity. The visible alarm utilizes a dual red and blue flashing LED light, and the unit houses an internal vibrating alert system. These two indicators allow for visual recognition in loud environments and working conditions. The alarm system also features a programmable audible alarm at 95 decibels. The unit is capable of a variety of alarm tones, and users can select which tone may be best for the individual workplace setting. The triple alarm system with multiple sensory indicators is sure to be noticed in almost any work environment.

Specifications

The Gasman single gas monitor is lightweight and compact, weighing less than 135 grams and with dimensions of 90 x 48 x 24 mm. The unit is available with a wide variety of gas sensors which feature various detection and alarm levels. The unit also features a quick response time of 20 seconds for flammable and toxic gases or 10 seconds for oxygen. Its datalogging feature has approximately 900 hours of storage and all events are time stamped. The battery life for this unit is incredible with 12 hours of runtime on a Rechargeable battery battery or up to 2 years on a non-Rechargeable battery.

Part Number: 116L-433

GS-BG-A-012-G Gasman Single Gas Monitor, 0-500ppm Hydrogen Sulphide, Rechargable Battery, N American CSA by Crowcon

For over 40 years, Crowcon Detection Instruments has produced state of the art gas detection devices for personal and industrial use. Building upon their reputation for reliable and innovative gas monitoring products, Crowcon introduces the Gasman personal gas monitor. Its lightweight and compact design is convenient for jobsites where workers need not be weighed down by excessive bulk and equipment. The unit conveniently clips to a pocket or helmet and operates continuously.

The Gasman personal gas monitor has numerous convenient features such as:

• One button technology
• Backlit LCD display
• Durable polycarbonate casing
• Quick response triple alert system
• Compact and lightweight design

Easy to Use

The Gasman s true one button technology is an ideal and simple design. The large glove friendly button is mounted on the front of the unit for easy access and controls all of the unit s programmable features. Also on the front, the Gasman s easy to read backlit LCD screen indicates gas readings and the battery status. The simple screen provides a clear indication of the unit s operation status. It will also alert the user 30 days in advance of when a calibration test is due. With a simple and intuitive design, Crowcon has produced a gas detector that reduces the complexities of workplace safety, and ensures workers in a straightforward manner that their equipment is on and operational.

Triple Alarm System

This portable single gas detection system features a triple alarm system that is sure to alert the user and anyone in the vicinity. The visible alarm utilizes a dual red and blue flashing LED light, and the unit houses an internal vibrating alert system. These two indicators allow for visual recognition in loud environments and working conditions. The alarm system also features a programmable audible alarm at 95 decibels. The unit is capable of a variety of alarm tones, and users can select which tone may be best for the individual workplace setting. The triple alarm system with multiple sensory indicators is sure to be noticed in almost any work environment.

Specifications

The Gasman single gas monitor is lightweight and compact, weighing less than 135 grams and with dimensions of 90 x 48 x 24 mm. The unit is available with a wide variety of gas sensors which feature various detection and alarm levels. The unit also features a quick response time of 20 seconds for flammable and toxic gases or 10 seconds for oxygen. Its datalogging feature has approximately 900 hours of storage and all events are time stamped. The battery life for this unit is incredible with 12 hours of runtime on a Rechargeable battery battery or up to 2 years on a non-Rechargeable battery.