$200 - $300

*Please note we can only ship RKI products to customers within the United States

58ES-418X 58 Liter 3-Gas (25 PPM H2S, 2.5% CH4, 19% O2) Ecosmart Refillable Cylinder by Gasco

The NEW 58-liter refillable cylinder is a smaller package! 58-liter ecosmart cylinders hold pure and mixed gases. Filled to your specifications, this lightweight portable cylinder is easier to manage than the traditional bigger 58-liter.

Features & Benefits

• Refillable or Disposable
• Dynamic smaller package
• Holds pure and mixed gases
• Lightweight and portable
• Same capacity as a traditional
• 58-liter disposable cylinder
• Eliminates disposal fees and regulatory paperwork

SST1-H-36-P SST1 Single Gas Detector, H2S 0-500ppm 3 Year Fixed Life, Pink (Hydrogen Sulfide) by WatchGas

The SST1 single gas detector provides up to three years maintenance free operation and is available in H2S, SO2, CO or O2 (2 year only) models. With its simple design it is perfect for users that are looking for ultimate protection while being easy to use, durable and cost effective. Simply turn on the device and it runs 24/7 for 2 to 3 years – no calibration, no battery replacement no charging and no stress. The device is easy to use and reduces the need for extensive training. The SST1 coupled with the SST Dock allows for the fastest bump testing on the market and makes fleet management extremely simple.

Applications

• Oil and gas upstream
• Oil and gas downstream
• Contractors
• Site maintenance
• Turn arounds and shutdowns
• Boiler rooms
• Steel plants
• Laboratories
• Shipping
• Power generation
• Mining

Features and Benefits

• Easy Setup: Near Field Communication built in as standard allows for a wide range of solutions depending on your needs. Simply pair with the WatchGas App to manage your fleet, bump, calibrate, assign or download event logs. See Tap & Go application note for more information on the benefits of NFC.
• Sensor: Using the latest in Solid State Technology our H2S, CO, O2, & SO2 offer stability and reliability over extreme temperatures and conditions. With its smaller form factor and the removal of traditional Electrolyte allows for a new standard in the single gas market.
• Display: With the largest LCD in its category the SST1's display shows months remaining.
• Rugged: Designed with the harshest environments in mind the SST1 offer an Ingress Protection rating of 67-68. The casing is a double shot housing that gives extra robustness while not compromising on quality. The screen protectors located either side of the display are to protect the LCD from scratching and is required due to the smaller sensor profile.
• Alert: As a safety device it is essential that the device clearly notifies users of the presence of gas. The SST1 has a 95dB alarm at 30 centimetres which is the industry standard and is required in loud industrial environments. High and Low alarms can be configured by the customer and automatically updated directly on the device or through the SST Dock.
• Cost Effective: Designed to be zero maintenance and remove the need for calibration the SST1 allows for 2 or 3 years of full up time. No sensor or battery replacements means no hidden costs and a one-year shelf life it is perfect for turn arounds and contractors.

Part Number: M1016500PM1

Part Number: M101620VN

Multiflow Regulator

The 6000 Series regulators are for use with 58 liter and 103 liter non-refillable cylinders having a C-10 (5/8 -18 UNF) inlet connection. They may also be configured for use on returnable cylinders having pressures to 2400 PSIG. These aluminum-bodied, singlestage, piston-style regulators have eight flow settings from 0.2 LPM to 6 LPM. They are compatible with non-reactive as well as reactive gas mixtures like hydrogen sulfide, nitric oxide and ammonia. 1000 PSI gauges are used for non-refillable cyclinders and 3000 PSI gauges are used for refillable cylinders.

Part Number: 6600

601AKA pH Meter Kit by Jenco

pH/mV handheld meter with manual temperature compensation and pH calibration via knobs and pH slope calibration potentiometer. Has LCD digital display, BNC connector, voltage recorder output and reference electrode pin. AC/DC Powered.

Includes:

• 601A pH/mV Handheld Meter
• 600P pH electrode
• 601AF carrying case

• Liquid crystal display readable under bright ambient conditions
• Three position rocker switch for pH off mv operations
• Recorder output
• All solid state design
• High stability
• Low drift
• Fast response
• Rugged carrying case
• UL approved ac line adaptor
• One conventional 9v battery
• Extra long battery life
• Battery low indicator

Part Number: 44L-404

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

620 Dual Input Differential Manometer by Test Products International

Dual Differential Input Manometer with ±80 inH2O range and 0.01 in H2O resolution. Auto power off, Backlight display, Zero function, Trim mode to stabilize readings.

The TPI 600 series is a hand held range of pressure meters and can be summarized as follows.

• TPI 610 Single Input - 4 Function - single unit of pressure
• TPI 615 Single Input - 7 Function - 7 units of pressure
• TPI 620 Dual Input differential 4 Function single unit of pressure
• TPI 625 Dual Input differential 7 Function 7 units of pressure

All these models measure over the range of -40.0 to +120.0 mbar. Each unit has increased resolution of 0.01 mbar and automatically auto-ranges at + 19.00 mbar to 0.1 mbar resolution. Each model is supplied complete with carry pouch, battery and instruction manual.

Features:

• Differential input with ± 80" H2O range
• Display - 4 digit with backlight
• Smooth - Stabilizes display when measuring fluctuating pressures
• Auto Off: Conserve battery power

Standard Accessories (Included):

• 9V Alkaline battery (A009A)
• Soft Pouch (A600)
• Silicone Tube with 1/4" barbed 1/8" NPT fitting

*Please note we can only ship RKI products to customers within the United States

M001-0018-000 UNI MP100 Single Gas Detector, H2 Hydrogen, Measuring Range: 1000 ppm, Resolution: 1 ppm by mPower Electronics

The UNI MP100 offers a simple, personal protection for a wide array of toxic gas and oxygen (O2) measurement applications. In addition to common sensors such as carbon monoxide (CO), hydrogen sulfide (H₂S), nitrogen dioxide (NO₂), ammonia (NH₃) and sulfur dioxide (SO₂), we offer less-common sensors including chlorine (Cl₂), chlorine dioxide (ClO₂), phosgene (COCl₂), hydrogen chloride (HCl), arsine (AsH₃), phosphine (PH₃), ozone (O₃), methyl mercaptan and ethylene oxide. Special oxygen monitors are available with long-life lead-free sensors or with inverted alarms for inert gas applications. The monitors have a large LCD providing maximum readability in the field and are made with six bright red LEDs allowing for quick alarm notification. Constructed of strong and durable material, the UNI is designed to be comfortable, yet drop-resistant. The UNI series can easily be bump tested and calibrated with the mPower CaliCase System.

Features, Functions and Benefits

• 50% larger (AA versus 2/3 AA) Lithium Battery
• Widest choice of sensors on the market
• Large display
• 50 Event datalogging
• Low cost of ownership
• Smart sensors
• Solid stainless-steel alligator clip
• Durable housing
• Fast calibration & download using docking station
• UL Classification Class I, II, III, Groups ABCDEFG