$200 - $300

18105247 T40 Rattler Disposable Single Gas Monitor, H2S by Industrial Scientific

The T40 II Rattler single gas detectoris primarily used to keep personnelsafe by detecting the presence of hydrogen sulfide(H2S) or carbon monoxide (CO), in a serviceable, maintainable, compliance instrument. The T40 II Rattler is the easiest gas detector to service while still makingcompliance easy and costeffectivewith a confidence flash. The T40 II Rattler is robust and light, with an ingress protection of IP66/IP68 and is suitable for working in the most challenging, hazardous area environments. T40 II Rattler introduces an ultra-fast T90 response time that can detect gas hazards on the job, saving valuable time, to ensure worker safety. To meet the needs of longterm operation, the high-performance lithium battery can operate under extreme weather conditions continuously for 2 years from powering up with a 1-year shelf life.

The T40 II Rattler is fitted with two visual red alarm LEDs, in addition to an audible and a vibration alarm when the gas concentrations exceed the High, Low, TWA, or STEL alarm preset values.

• Robust, compact, and light
• Ultra-Fast sensor response
• Automatic Self-Test
• Data and Event Logging
• Configurable Low and High alarm settings
• Optional TWA and STEL Alarm
• Multiple sensor range options with high accuracy
• Replaceable battery with 2-years run-time
• One Year Shelf Life

*Please note we can only ship RKI products to customers within the United States

103KA Handheld Conductivity Meter Kit by Jenco

Conductivity handheld meter with LCD display, rugged splash proof case and replaceable K-1.0 conductivity probe. Has cell adjust and automatic temperature compensation from 5 to 55°C. Uses one 9 volt battery, 50 hours typical usage on one battery.

Includes:

• 103 Handheld Conductivity Meter
• K=1 Conductivity Cell

• LCD display
• Conductivity cell adjust
• High stability
• Rugged case
• CEll constant k = 1.0

612K Portable Digital pH Stick Meter with Replaceable pH Electrode Kit by Jenco

Portable Digital pH Stick Meter with replaceable pH electrode. Features dual point calibration and has manual temperature compensation. 9 Volt Battery.

Includes:

• 612 Portable Digital pH Stick Meter with Replaceable pH Electrode
• 612E pH/Reference Stick Electrode
• 612F carrying case

• All solid state design
• Low power consumption
• 0.31 high LCD display readable under bright ambient conditions
• Display hold function
• Slope adjust
• Low drift and high stability
• Manual temp. compensation
• Fast input response
• A9 voltage battery
• Battery low indicator
• Easy to use
• Low cost

6231MKA pH/mV/Temp Microprocessor Handheld Meter with 3-Point Calibration Kit by Jenco

pH/mV/Temp. microprocessor handheld meter in splash proof case with 3 point calibration, 40 memory storage, BNC, pH/ORP connector with 8-pin DIN ATC connector. AC/DC power. CE Approved

Includes:

• 6231M: Meter with memory
• Choice of 6230A: Glass Temperature Probe. 3-ft Or 6230AST: Stainless Steel Temperature Probe, 3-ft

• 3 point calibration
• 40 memory storage
• Power down memories
• Electrode offset recognition
• Electrode slope recognition
• Built in buffer temp. coefficients
• ATC
• CE approved
• Splash resistant/watertight case
• Battery/ac adaptor
• High 50/60hz noise rejection
• UL approved ac line adaptor
• Aconventional 9v battery
• Highly reliable mechanical touch keys with audio feedback

SCT-108.001.15 SCT-DO-PEN-1 Handheld DO/O2/Temp Meter by ScichemTech

Includes:

• Handheld DO/O₂/Temp Meter
• Storage Solution
• LAN Connection
• Battery
• Instruction Manual

Features:

• Reliable SCT tester for Dissolved Oxygen, Oxygen and Temperature measurements.
• Microprocessor based for fast and accurate measurements 0.01 mg/L resolution.
• Special viewing angle designed of waterproof housing IP 57 rated. It floats on water.
• Large LCD display DO and Temperature simultaneously.
• Easy to calibrate by one keyboard and Automatic Temperature Compensation (ATC), Manual Salinity (MSC) and Altitude (MAC) Compensation.
• Multi-functions with Data-hold, Max/Min and shows PTS after calibration. Degree °C/°F are switchable.
• Auto power shut off after 10 minutes of non use.
• Easy to replace electrode module and the type of electrode would be recognized automatically and shown in display during insertion.
• Battery operated. Low battery and consumption indicator.

791LPTAC Panel Mount Digital Temperature Transmitter with 4- 20 mA Current Output, Type PTA, Red LED by Jenco

Panel mount digital temperature transmitter with 4- 20 mA current output that allows the 791 to drive any loop powered process indicator or recorder. Current output has expanded or normal switch for user adjustable center point and span control for temperature to 4-20 mA output and features a LCD display & 1/8 DIN Aluminum case. Types. J, K, T, 3-wire Pt-100 RTD, specify °C or °F. Ambient range 0 to 40°C. 115 / 230V AC operation.

• All solid state design
• Low power consumption ,reduced internal heating ,increased reliability
• High 50/60 hz noise rejection
• Heat cycled 100 hours before shipment
• Available for various thermocouple and rtd calibrations
• Easy to install
• Aluminum 1/8 DIN housing
• Isolated 4 to 20 mA output over span in nor mode
• 115VAC /230VAC operations

6230M pH/mV/Temp. Microprocessor Handheld Meter by Jenco

pH/mV/Temp. microprocessor handheld meter in splash proof case with 3 point calibration, 40 memory storage, RS-232-C IBM compatible communication interface and BNC, pH/ORP connector with 8-pin DIN ATC connector. AC/DC power. CE Approved.

• 3 point calibration
• 40 memory storage
• Power down memories
• Electrode offset recognition
• Electrode slope recognition
• Built in buffer temp. coefficients
• ATC
• RS-232c output
• CE approved
• Splash resistant/watertight case
• Battery/ac adaptor
• High 50/60hz noise rejection
• UL approved ac line adaptor
• Aconventional 9v battery
• Highly reliable mechanical touch keys with audio feedback