$200 - $300

*Please note we can only ship RKI products to customers within the United States

CS8000TC-K=1 Heavy-Duty Contacting Conductivity / TDS Sensor by Sensorex

Ideal for continuous monitoring in boiler, cooling tower, and other process applications, the CS8000 is a convenient and reliable conductivity monitoring probe.

The probe installs in seconds, with a keyed flange to ensure proper sensor orientation. Cleaning, calibrating, and replacing sensors has never been easier. The S855 cable assembly detaches from the sensor body in seconds with no tools required, just hand loosen the knurled nut and remove the sensor. Flush mount graphite measuring suface is easily cleaned with detergent and a soft bristled brush.

Temperature compensation is included with a choice of sensor types (10K NTC, 30K NTC, Pt 1000RTD & Pt100 RTD) to match the requirements of your conductivity transmitter or controller. Compatible with Sensorex controllers and transmitters as well as those from other manufacturers.

Order the CS8000TC by itself, or in a pre-configured kit that includes the cable assembly and flow cell.

Features:

• Installs in seconds with no tools necessary
• Quick disconnect cable enables easy sensor maintenance
• Flat measurement surface resists coating
• Built in automatic temperature compensation Compatible with a wide range of transmitters and controllers

37803-87 Traceable® Remote Probe Digital Thermometer with Calibration; Extra Long, Waterproof by Digi-Sense

Extra-long probe, 20 inches (0.5 meter) created for deep vessels. Thermometer is ideal for placing in large beakers/flasks, vats, pails, and drums. Applications include foods, pharmaceuticals, industrial plants.

Waterproof (IP67) to a depth of 10 feet (3 meters) meter/probe/cable. Super large jumbo LCD can be read at 70 feet. Accurate readings with tip penetration of only 1 inch (2.5 cm). Stainless-steel spring-powered holder for ease in placing probe anywhere. Wall mount provides instant viewing, indoor/outdoor use.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

Stainless-steel probe, stainless-steel spring-loaded holder, shaft collar, batteries, NIST-traceable calibration certificate with data.

MRS7575-TOT MRS Series Industrial Multi Jet Meter, 3/4", Totalizing Only by Quantrol

Carlon MRS® industrial electric contacting multi-jet meters are an economical answer for industrial applications needing good tolerance to contaminants, an electrical output signal and total volume registration.

With an easy to read register display, the MRS® water meter is designed with reliability and affordability in mind. Used in conjunction with any of Carlon's timers and controls; you can create a customized system specific to your application requirements. The MRS® meter is available in sizes from 3/4" to 2". Carlon's MRS® Industrial meters meet or exceed AWWA specifications.

08082-02 TI.32 6 Silicone Filled Adjustable Angle Bimetal Thermometer, 3" Dial, 6" L/25-125F/-5-50C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases).

Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for Acrylic lens thermometers is 200°F (93°C).

Key Features

• Dampened movement
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with Acrylic lens
• Recalibrate using the external reset screw
• For use in applications that do not exceeding 200°F

CW-CLARITY-P Clarity Wedge by AquaPhoenix

Used to quickly and accurately determine general water clarity levels while in the field.

HX8 GrowNET 8-Port Hub by Agrowtek

Expand the number of GrowNET™ ports on your Agrowtek GrowNET™ digital serial bus network. Connect multiple GrowNET™ devices to a GrowNET™ master device such as an LX1 USB AgrowLINK™ for PC or LX2 MODBUS ModLINK for PLC applications.

Buffered hub extends the range of bus networks and can provide power to devices from the DC power jack. Includes eight ports for connecting devices and one port for connecting to the upstream bus.

Hubs may be daisy-chained as required up to the maximum number of ports on a bus (247 modbus/250 GrowNET™.)

Features

• 8 GrowNET™ ports for devices sensors, relays, pumps, etc.
• Provide power to sensors & relays from the hub ports
• Buffered ports for signal strength
• 1-Year Warranty
• Tough ABS plastic enclosure
• Made in USA

CS8000TC-K=0.1 CS8000TC-K=0.1, 8-Pin Din Top Cap, TC= by Sensorex

Ideal for continuous monitoring in boiler, cooling tower, and other process applications, the CS8000 is a convenient and reliable conductivity monitoring probe.

The probe installs in seconds, with a keyed flange to ensure proper sensor orientation. Cleaning, calibrating, and replacing sensors has never been easier. The S855 cable assembly detaches from the sensor body in seconds with no tools required, just hand loosen the knurled nut and remove the sensor. Flush mount graphite measuring suface is easily cleaned with detergent and a soft bristled brush.

Temperature compensation is included with a choice of sensor types (10K NTC, 30K NTC, Pt 1000RTD & Pt100 RTD) to match the requirements of your conductivity transmitter or controller. Compatible with Sensorex controllers and transmitters as well as those from other manufacturers.

Order the CS8000TC by itself, or in a pre-configured kit that includes the cable assembly and flow cell.

Features:

• Installs in seconds with no tools necessary
• Quick disconnect cable enables easy sensor maintenance
• Flat measurement surface resists coating
• Built in automatic temperature compensation Compatible with a wide range of transmitters and controllers

S200C/BNC pH Sensor, 12mm, Polymer, 1M, BNC by Sensorex

The Sensorex S200C is one of our most popular laboratory pH electrodes, due to its reliability and low maintenance design. The pH1600 replaces the S200C/BNC pH probe and has the same design, but features a new Ultem® body for superior chemical compatibility. This pH probe performs to the same specifications compared to the Sensorex S200C and is instantly ready for use as a direct fit replacement.

• New Sensorex S200C
• Durable and chemically compatible Ultem® or body
• Reliable and accurate over the full range of pH measurements
• No refilling or maintenance required with sealed gel-filled design
• Instantly ready for use, and has one year guaranteed shelf life
• One year limited warranty

Part Number: M197129LM4

MA882 Digital Refractometer For Wine & Grape Juice / Must Measurments by Milwaukee

Thousands of food and beverage professionals and hobbyists, from chefs and food quality professionals to brewers and wine makers, have moved to digital BRIX measurement from less accurate and less precise optical refractometers.

WHAT PEOPLE ARE SAYING

"Anyone who produces wine, grape juice or craft beer should find this product one of the best investments they make on any piece of equipment."

"I am in love with this instrument. No more large samples. No more phony readings from badly made refractometers."

"Dramatically improved my commercial brewing consistency & efficiency. Now I can quickly stop my sparge when I get to to my OG."

"I used this for finishing Maple Syrup. I had been trying to determine sugar content using temperature and a hydrometer. I found both very difficult to use. The refractometer was much easier."

SUMMARY

The Milwaukee digital BRIX refractometer is temperature compensated with a 0 to 50 percent BRIX range and +/- 0.2 percent accuracy. It is easy to use with simple two button operation and fast with a response time under 2 seconds. Maintenance is a breeze also with an easy-to-clean sealed flint glass prism and stainless steel well. The MA882 eliminates the uncertainty of optical refractometers by providing and accurate digital readout.

DESIGN FEATURES

• Fast, accurate results with digital dual level LCD readout.
• Easy measurement with just 2-3 drops of sample needed and results less than 2 seconds.
• Simple one-point calibration using distilled or deionized water.
• Easy to clean, stainless steel sample well with unit rated to IP65 as "dust tight" and protected against water jets.
• Battery percent level indicator with automatic shut-off (batteries included).
• Ideal for winemakers, brewers, fruit and vegetable growers, maple syrup producers, and food producers.
• The conversion used is based on the ICUMSA Methods Book (International Commission for Uniform Methods of Sugar Analysis).

CLDA-5018 Chlorine Dioxide Maintenance Kit for CLDS series sensors by Sensorex

Keep your chlorine dioxide amperometric sensors running for extended lifetime and improved accuracy using this chlorine dioxide maintenance kit. Compatible with CLD Series Chlorine Dioxide Amperometric Sensors. This kit includes:

• (1) replacement membrane cap
• (1) replacement pressure relief band
• (2) 30mL bottles of electrolyte refill solution
• (2) 10mL syringes
• (3) polishing squares

B60 60 CFM Squirrel Cage Blower by Schaefer

Shaded pole inflation blowers have forward curved wheels and energy efficient, open drip proof motors. These blowers are frequently used for inflating greenhouse polyethylene.

Features and Benefits:

• Available with black or white enamel finish
• Choice of standard or economy blowers