$200 - $300

Part Number: X11145PA

SXL-DVX1 Drain System with Valve by Agrowtek

Electronic optical "liquid level control system" includes two liquid sensors for high and low "fill" or "drain" control of fluids in tanks, reservoirs, etc. Only power and a valve or relay is required to complete the level control system; no external controller required. Easy to wire and setup. Includes one standard and one latching sensor. Compatible with 5-24Vdc valves and relays. Available with optional VX1 water valve kit or RX1 outlet kit for direct operation of 120Vac pumps, valves and other equipment.

MC122 pH Controller by Milwaukee

With Milwaukee's MC Controllers you can monitor and control pH and/or ORP levels.

The Milwaukee Instruments "MC" Controllers have a user selectable set point and a visual "Power Activated" LED notification light. Power to the controller box is turned on when the reading is Above or Below (user selected) the selected set point. These MC Controllers are ideal for CO2 or ozone dosing.

With each Milwaukee Smart controller, your aquarium will have the individual attention that it needs.

Each unit comes with 12 VDC adapter, mounting kit, probe, probe holder and starter calibration solution for pH. (factory calibrated for ORP)

Professional pH controller especially designed for use with aquariums.

• User selectable Hi/Low Set Point
• Manual 2 points calibration
• Visual LED alarm
• Supplied with 12 VDC adapter and mounting kit
• Power plug for CO2 dosing
• Double junction pH electrode with 2m cable (BNC connector)

Part Number: 58L-482

Pad Set for WC-1Hp (8 Full Pads)

Part Number: CDI-DFR-600

Old Part Number: Z111450
New Part Number: Z111450PA

WD-17006-05 InnoCal NIST-Traceable Calibration; 5 to 9 Points, Liquid-in-Glass Thermometer by Oakton

Glass thermometers are one of the most common types of temperature instruments and are available in a variety of styles, sizes, and versions. Their unique characteristics of wide range, precision, repeatability, and quick response create a unique challenge for the metrologist who is calibrating these instruments. InnoCal can calibrate spirit-in-glass (SIG) thermometers. Calibrations for glass thermometers use direct comparison in high-stability liquid baths using Precision Reference Thermometers (PRTs) and Standard Platinum Resistance Thermometers (SPRTs) and high precision displays. The glass thermometers are inspected for cracks and liquid-column separations before testing.

• InnoCal is the only authorized service center for ERTCO brand liquid-in-glass (LIG) thermometers in the United States
• We also calibrate any make and model of LIG thermometers including Brooklyn Thermometer, Miller and Weber, Inc., LSW, and H-B Instruments
• Testing range for liquid-in-glass thermometers is from -80 to 420°C (-176 to 788°F)
• Calibrated at manufacturer's recommended points or at your desired points depending on your specific requirements. Correction factors are also provided for your convenience.

To meet your calibration needs:

• All calibration certificates contain as-found and as-left data, estimated measurement uncertainties (emu's), and test uncertainty ratios (TUR's) at no additional cost!
• This NIST-traceable calibration allows you to confirm that the specific asset you purchase meets the manufacturer's published specification
• EPA, USDA, ISO, and GLP/GMPs standards require regular NIST-Traceable calibration of all test equipment being used in critical applications
• Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays

All measurements reported are traceable to SI units via national standards maintained by NIST and performed in compliance with ANSI Z540, ISO17025, and MIL-STD-45662A. FDA Compliant.

InnoCal is accredited to ISO/IEC 17025 by the American Association for Laboratory Accreditation (A2LA) under certificate number 1746.01. This accreditation is your assurance that the calibration is performed in a qualified, controlled laboratory.

Calibrations on glass thermometers are performed using direct comparison in high-stability liquid baths using high-precision PRT's and SPRT's and displays. Thermometers are inspected for cracks and liquid-column separations before testing. Measurements are performed at 5 to 9 points between -197°C and 550°C.

Points are generally selected at the manufacturer's specified points but customer-specified points can be accommodated. For certificates with more calibrations points, see 17006-06 for 10 to 15 points.

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

MA885-BOX Digital Refractometer for Wine and Grape Product Measurements by Milwaukee

The MA885 is optical instrument that is based on the measurement of the refractive index of a solution. The measurement of refractive index is simple and quick and provides the vintner an accepted method for sugar content analysis.

Samples are measured after a simple user calibration with steam distilled water (starter bottle provided with your unit).

Within seconds the instrument measures the refractive index of the grape. This digital refractometer eliminates the uncertainty associated with mechanical refractometers and is easily portable for measurements in the field.

The instrument utilizes internationally recognized references for unit conversion and temperature compensation.

Temperature (in °C or °F) is displayed simultaneously with the measurement on the large dual level display along with icons for Low Power and other helpful message codes.

Key features include:

• Dual-level LCD
• Automatic Temperature Compensation (ATC)
• Easy setup and storage
• Battery operation with Low Power indicator
• Automatically turns off after 3 minutes of non-use
• Single-point calibration with steam distilled water (starter bottle provided with your unit)
• Waterproof models offers IP65 waterproof protection
• Quick, precise results readings are displayed in approximately 1.5 seconds
• Small sample size as small as 2 metric drops

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

WD-20250-27 Video Borescope, 320 x 240 Resolution by Digi-Sense

See into hard-to-reach areas with flexible camera-tipped probe. View inspected area on bright LCD monitor. Adjustable LED light on camera illuminates dimly-lit spaces or adjusts down when viewing reflective surfaces to eliminate washout.

Features

• View on external video device with TV-OUT hookup
• See even in dark environments with four adjustable LED lights
• 180° image rotation
• Stop replacing batteries built-in Li-Ion battery with USB charging
• Waterproof (IP67-rated) flexible camera probe

Borescope model 20250-28 features

• Real-time viewing on 3" color LCD
• Selectable English or German languages

Video borescope model 20250-27 features

• Real-time viewing on 3.2" color LCD
• Capture still and video images for playback on LCD, TV, or computer monitor
• Easy transfer of video and images to your PC with SD card or USB cable; date/time stamp
• 8 GB flash memory
• Selectable English, French, German, or Spanish languages

Applications

• HVAC ductwork inspection
• Home inspection
• Automotive repair and vehicle inspection
• Industrial maintenance (see behind equipment, inspect welds, locate wiring)

Includes

Probe, mirror, hook, magnet, carrying case, USB cable, DC 5V charger, video output cable, and rechargeable 3.7 V lithium-ion battery.

*Please note we can only ship RKI products to customers within the United States