$200 - $300

6010NKC Handheld pH/ORP Meter Kit by Jenco

Includes:

• 6010N Handheld pH/ORP Meter
• 6000A Glass, 10K Thermistor with Jenco Screw Connector
• 600P pH electrode, 3-ft cable, BNC connector, max temperature 60° C
• 6010F carrying case

• Simultaneous displays pH or mV and temperature.
• 50 data set reviewable memory (6010M only).
• Convenient calibration with automatic buffer recognition of US and European buffer sets. Calibration data is stored in memory and ready for use on power up.
• Automatic or manual temperature compensation.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof
• Low battery indicator.
• RoHS and CE compliant.

SCT-108.001.15 SCT-DO-PEN-1 Handheld DO/O2/Temp Meter by ScichemTech

Includes:

• Handheld DO/O₂/Temp Meter
• Storage Solution
• LAN Connection
• Battery
• Instruction Manual

Features:

• Reliable SCT tester for Dissolved Oxygen, Oxygen and Temperature measurements.
• Microprocessor based for fast and accurate measurements 0.01 mg/L resolution.
• Special viewing angle designed of waterproof housing IP 57 rated. It floats on water.
• Large LCD display DO and Temperature simultaneously.
• Easy to calibrate by one keyboard and Automatic Temperature Compensation (ATC), Manual Salinity (MSC) and Altitude (MAC) Compensation.
• Multi-functions with Data-hold, Max/Min and shows PTS after calibration. Degree °C/°F are switchable.
• Auto power shut off after 10 minutes of non use.
• Easy to replace electrode module and the type of electrode would be recognized automatically and shown in display during insertion.
• Battery operated. Low battery and consumption indicator.

Part Number: 34L-252-3

Part Number: 58L-430

Vividia Waterproof USB Flexible Inspection Camera Borescope Endoscope Microscope with Manual Focus by Oasis Scientific

By connecting the USB Flexible Inspection Camera Borescope Endoscope Microscope to your PC via USB interface, it allows you to perform detailed visual inspection in hard-to-reach places. This inspection camera is powered by a USB connection to your PC, so no batteries are required. The 56cm (1.8ft) flexible cable can be bent into many shapes to fit into unreachable areas. With 0.3M pixels CMOS sensor, 1-50x adjustable magnification, manual focus plus fine auto focus, and four built-in LEDs for illumination, this camera allows you to capture snapshots or videos with rich color throughout a large dynamic range. It is easy to take snapshot by hardware or software control, and the images can be saved, compared and printed. The software which comes with the camera has measurement function for length, arc, and angle. Waterproof camera withstands wet environments. The small 13mm camera head is perfect for up-close visual inspections in small spaces. It is ideal for use in automotive maintenance, electrical repair, plumbing applications, HVAC/R and the visual inspection of otherwise inaccessible areas.

Product Details:

• Dimension: Flexible cable with handle: 66cm (2.2ft); Flexible cable: 56cm (1.8ft); Flexible cable diameter: 9mm (0.35in); Camera head outer diameter: 13mm (0.51in).
• Weight: 406g (14oz).
• Compatibility: Windows 7/Vista/XP, MAC 10.5 or above, Linux (note: for Mac, please use Photo Booth or Facetime to open it. No software for Mac at this time).
• Package Includes: USB Inspection Camera Endoscope, CD Software (with User's Manual and software), and Calibrator for Measurement Application.
• Manufacturer s Warranty: 1 year.

Technical Details:

• Image Resolution: 640 x 480 pixels
• Image Resolution Formats: JPEG
• Video Resolution: 640 x 480 pixels
• Video Resolution Format: WMV
• Video Resolution Frame Rate: up to 30FPS @ VGA
• Focus: manual focus plus fine auto focus
• Focal Distance: 5mm - infinity
• Magnification: 1X - 50X (adjustable)
• Waterproof camera head & cable (handle is NOT waterproof)
• Photo Taken: by hardware and by software
• Illumination: 4 white LED lights with adjustable brightness
• USB Cable: 82cm (2.7ft) long with USB 2.0 interface
• Measurement Functions: Measure Length, Arc, Angle

BW Technologies Manual Aspirator Pump Kit with Probe

The BW Technologies Manual Aspirator Pump Kit with Probe is compatible with your Gas Alert Quattro personal gas detector and monitor. The unit weighs approximately .7 pounds and is easily portable. The sampling probe reaches approximately 1 foot (or .3 meters) and is made of durable plastic piping. The rubber bulb is an ideal size for the handheld manual aspirator pump. The kit comes complete with hose, probe, adaptor cap, and aspirator pump.

Part Number: QTAS01

*Please note we can only ship RKI products to customers within the United States

601AKA pH Meter Kit by Jenco

pH/mV handheld meter with manual temperature compensation and pH calibration via knobs and pH slope calibration potentiometer. Has LCD digital display, BNC connector, voltage recorder output and reference electrode pin. AC/DC Powered.

Includes:

• 601A pH/mV Handheld Meter
• 600P pH electrode
• 601AF carrying case

• Liquid crystal display readable under bright ambient conditions
• Three position rocker switch for pH off mv operations
• Recorder output
• All solid state design
• High stability
• Low drift
• Fast response
• Rugged carrying case
• UL approved ac line adaptor
• One conventional 9v battery
• Extra long battery life
• Battery low indicator

0563 2063 206 pH3 Instrument Kit by Testo

The testo 206 series is ideally suited for applications in liquid and semi-solid media. The instruments stand out thanks to the combination of a pH immersion probe and a temperature probe for precise and fast temperature compensation. Thanks to the large volume of gel electrolyte and the dual wall diaphragm, the probe is leak-proof, maintenance-free and insensitive to dirt.

The automatic final value recognition supports the user during measurement. The protective cover TopSafe provides the instruments with the protection class IP68, it is dishwasher-safe, hygienic and protects the measuring instrument from dirt, water and impact.

The testo 206-pH1 is specially designed for fast pH checks in liquids.

The testo 206-pH2 is ideally suited for pH measurement in semi-solid and protein-rich foods such as jellies, creams, cheese, fruit etc.

The testo 206-pH3 is equipped with a BNC socket which allows the connection of any pH probes to the instrument, depending on the application. This makes the instrument universally applicable.

Kit includes:

• One-hand pH/°C measuring instrument
• pH3 probe head with BNC interface
• TopSafe
• Belt/wall holder

• Ideally suited to applications in liquid and semi-solid media (e.g. in the food sector)
• Built-in temperature sensor
• Maintenance-free gel electrolyte
• Robust, waterproof and dishwasher-safe protective cover (TopSafe, protection class IP65)
• Automatic final value recognition (Auto-hold)
• Two-line display
• 1, 2, or 3-point calibration possible

*Please note we can only ship RKI products to customers within the United States

WD-35625-46 TempTestr® Infrared IR Food Thermometer, with NIST Traceable Certificate of Calibration by Digi-Sense

Ensure your food is at the proper temperature without contamination worries!

Our TempTestr IR Food model is optimized for the food preparation industry. It offers ±1%/1°C (2°F) accuracy in the HACCP critical temperature range of 0 to 60°C (32 to 150°F). This tester s high spectral response lets you take readings through steam. Laser sighting lets you pinpoint your exact target.

• Includes 9V battery, wrist strap and Instruction Manual
• Offers high ±1°C accuracy at HACCP critical temperature ranges
• Infrared temperature measurement provides safe, noncontact readings
• Laser sighting pinpoints your exact target
• °F/°C selectable
• Simple one-handed operation just point and press button! Extremely rapid response time 1/2 second for 95% response

*Please note we can only ship RKI products to customers within the United States

Part Number: M1971

3010M+106A Handheld Cond/TDS/Sal/Temp Meter Kit by Jenco

Includes:

• 3010M Handheld Cond/TDS/Sal/Temp Meter
• 106A Two-wire conductivity cell with 4 PIN connector, K=1.0 (0.02~20.00mS/cm).

• Simultaneous displays of conductivity, salinity or TDS with temperature measurements.
• 50 data set reviewable memory.
• Convenient one point calibration. Calibration data is stored in memory and ready for use on power up.
• Selectable cell constants for true wide range readings.
• Adjustable TDS coefficient, reference temperature and temperature coefficient.
• Uses one conductivity cell for conductivity, salinity and TDS measurements.
• Accepts 2-wire conductivity cells with K=0.1, 1.0 and 10.0 cell constants for improved flexibility and accuracy.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof.
• Low battery indicator.
• RoHS and CE compliant.

Part Number: 34L-112-5

Part Number: CGQ5812

Part Number: 34L-125-10

Part Number: 34L-430