$200 - $300

30" OSHA Set, Black

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

WD-35634-66 pHTestr® 5 Waterproof Pocket Tester with pH Buffer Pouches by Oakton

These pocket-sized testers have a replaceable single-junction sensor which can be easily switched out, allowing you to save money by using the tester body over and over again. A large LCD makes viewing measurements easy and features a three-color backlight indicating operational mode - blue for measurement, green for calibration and red for alarm condition.

Additional features include hold function to lock in measurements, self-diagnostic error message, and status icons for measurement stability and low battery voltage. The IP67-rated housing features an easy-to-grip design and floats if accidentally dropped in water when sensor cap is on. Powered by four AAA batteries, the testers can operate up to 400 hours continuously. To conserve power, the unit will auto power-off after 8 minutes of nonuse.

Buffers are traceable and offer ±0.01 accuracy at 77°F (25°C).

Key Features

• Large easy-to-read LCD features three-color backlight
• Simple to calibrate with automatic standard recognition
• Rugged IP67-rated housing is waterproof, dustproof, and floats in water with sensor cap on
• Leakproof cap with fill line functions as a sample/calibration and hydrating cup
• Secure - attach a lanyard to prevent losing or dropping in the field
• Auto shutoff extends battery life
• Bundled kit for convenience and savings!
• Economical pH buffer pouches are accurate and convenient

Includes

Pack of 20 assorted (4, 7, and 10) buffer pouches, plastic storage case, lanyard, and four AAA batteries.

*Please note we can only ship RKI products to customers within the United States

WD-20250-58 1000A AC/DC Clamp Meter with NIST-Traceable Calibration by Digi-Sense

Reliably detect and measure the power quality running to your equipment to quickly find hidden issues. These meters feature durable, double-molded plastic housing and jaw.

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards
• Large backlit display provides easy-to-read measurements
• Autorange feature automatically selects optimal measuring range
• Low-battery indicator alert for when it s time for a fresh battery

400 A AC Clamp Meters (20250-55, -56)

• Diode testing, continuity check with a buzzer sound at 50 ?, and a measurement rate of 2 readings per second
• Built-in noncontact AC voltage detector
• CAT III-1000 V safety rating
• Improved measurement ease with data Hold function
• Model 20250-56 also measures DC current and capacitance, and features a peak Hold function that captures the peak AC current or voltage reading

1000 A AC Clamp Meters (20250-57, -58)

• Improve accuracy with True RMS check for load current and AC voltage, as well as continuity of contacts, fuses, circuits, and switches
• See power variations on analog bar graph display
• CAT III-600 V safety rating
• Model 20250-58 also features DC current measurement and True RMS for more accurate current readings

Applications

• Electrical
• Industrial
• Laboratory
• HVAC
• R & D

Includes

Test leads, temperature probe (models 20250-55, -56, and -58), carrying case, 9 V battery, and NIST-traceable calibration report supplied by InnoCal.

Part Number: F105310PM10

Part Number: M101670PM1

The Charger for Pen Dosimeters by SE International

The patented, handheld Charger can charge a variety of direct-reading dosimeters by simply squeezing the lever of a generator. The Charger requires no batteries. By pulling a trigger, a dosimeter is easily placed in or removed from the charger. The clamping action holds the dosimeter for you. NSN# 6665-00-856-8813 - CD V-750 Model 6

7000 Cable Drying Windbag - Use with Vented Heaters with Adaptor by Pelsue

The 7000 Series is a cable drying "windbag" used with all Pelsue heaters and blowers to dry wet cables fast! Full length zipper openings make installation of the Windbag easy and allow quick cable inspection at any time. Strategically placed vents provide even drying of all ares of the splice. The permanently installed web straps and buckles at all ends of the Windbag ensures a snug closure around the cable. Expansion sections are available for large diameter cable, or for joining Windbags end to end.

The Windbag's flame resistant fabric meets CPAI-84 standard.

2671000 UV Lamp, Shortwave, 254 nm, 2.125" by AquaPhoenix

Shortwave (254 nm) UV lamps for field or laboratory use. Either lamp can be used in the lab with power supply while Portable Field Pack can only be used with the 1.75" lamp. Portable Field Pack requires a 9-Volt battery (not included) and has a belt clip for easy traveling. Both lamps are physically identical except for bulb and cord length (these are shorter in the 1.75" version). NOTE: Not for use in microbiological applications. UV Lamp contains mercury. Dispose according to state, local or federal regulations.

Contains mercury. Dispose of according to local, state and federal regulations.

608 Handheld Meter with Red LED Display by Jenco

• Three position rocker switch for on/off/momentary operation
• All solid design
• Low input response
• Manual temp. compensation for pH measurement
• 6conventional aa batteries
• Low drift and high stability
• Bright red led display
• UL approved ac line adaptor
• Low cost
• Rugged carrying case
• Analog recorder output

7460NS/7465NS Intrinsically Safe Dual Angle Flashlight Rechargeable (Yellow) by Western Technology

The 7465 LED - Intrinsically Safe Rechargeable Flashlight is a lightweight, rechargeable, hand-held work light with a 210 degree articulating head that rotates a full 360 degrees. This flashlight features an extremely strong magnet, the latest in C4® power LED technology, microprocessor controlled high and low intensity modes, emergency flash and moonlight mode. The 7465 LED Intrinsically safe flashlight is the Flood Light model with either an integrated storable hang hook(Yellow) or spring-loaded clip(Orange). Removable magnet with 135 lb pull strength features a replaceable rubber boot. Available with optional 4 "AA" battery carrier for non-rechargeable operation.

Features

• Safety Rating: Class I & II, Div 1, Groups C, D, F, G;
• Safety Rating: Class III, Temp Code: T4 Exia;
• Safety Rating: Non-Incendive: Class I, Div 2, Groups A, B, C, D; T4
• LED Emitter: 2 C4® LEDs, impervious to shock (50K hour lifetime)
• Light Output:High Beam- 163 Lumens, 3h 45min runtime, 54m beam distance
• Light Ouput: Low Beam- 50 Lumens, 12h runtime, 10m beam distance
• 4 Output Modes: High, Low, Emergency Flash, Moonlight
• Dual Power Source Options: rechargeable NiCd battery pack or 4 "AA" alkaline battery carrier
• Body: High-impact, super-tough nylon polymer construction
• Body Dimensions: Full Extended- 9.2"H, w/ Lighthead Bent- 7.5" H x 2.75" W
• Light Head Diameter: 1.625" H x 2.25" L
• Net Weight: 23.1 oz (655 g) w/ NiCd Battery; 18.3 oz (519 g) w/ Alkaline Batteries
• Yellow Model: features a magnet & stowable hook for hands-free use
• Orange Model: features a magnet & spring-loaded clip for hands-free use
• Light Head: features a 210 degree articulating head that rotates a full 360 degrees
• Lens: Unbreakable polycarbonate w/ scratch-resistant coating
• Engineering Reflector: produces a smooth flood beam to illuminate your work area
• On/Off Switch: Rubber dome push button actuator provides easy operation even when wearing heavy gloves
• Impact Resistance: 2 meter impact-resistance tested
• IPX4 Water-Resistant

*Please note we can only ship RKI products to customers within the United States

Part Number: M1016800PM2

WD-35607-50 Conductivity/TDS Cell, Epoxy Body, K=1.0 (Use with CON 100, 200, and 500 meters) by Oakton

Feature built-in temperature compensation

Each conductivity/TDS cell features a 3-ft cable and a two-band platinum sensor. Epoxy body cells have a temperature range of 0 to 80°C; glass and stainless steel body cells have a temperature range of 0 to 100°C.

• Epoxy, glass and stainless steel models available

Choose from three different cell constants.

• K = 1.0 for midrange conductivity measurements.
• K = 10.0 for high conductivity measurements (near or above 20 mS).
• K = 0.1 for low conductivity measurements (near or below 20 µS)