$200 - $300

Part Number: 70-TRIGGER

0572 2154 External Temperature/Humidity Stub Probe for Saveris 2-H2 by Testo

The plug-in humidity/temperature probe is suitable for measuring temperature and relative humidity in storerooms, cold storage areas and work rooms or in air conditioning/ventilation ducts.

The humidity/temperature probe is plugged directly in and is therefore compactly connected to the instrument/data logger.

The applications at a glance

Use the high-precision humidity and temperature probe (with an appropriate measuring instrument) for the following applications:

• Measuring the relative humidity and temperature in storage, refrigerated and work areas or in air conditioning/ventilation ducts
• Assessing thermal comfort
• Checking the correct ambient conditions in production facilities to comply with quality standards

Always reliable measurement results

Thanks to the good air flow, the humidity sensor for measuring relative humidity has a considerably faster response time in comparison to a humidity sensor installed in a housing. Thanks to its long-term stability, you can still count on measurement results that are reliable and correct, even after years of use.

Intelligent calibration concept

The humidity/temperature probe offers the highest digital measurement certainty. The digital probe allows readings to be processed directly in the probe. This technology eliminates instrument measurement uncertainty. The probe can be sent in for calibration on its own (without the data logger).

• Measures air temperature and humidity quickly and reliably
• Compactly connected to the logger: the probe is plugged directly into the logger
• Intelligent calibration concept
• Measurement range: humidity 0 to 100% relative humidity; temperature -30 to +50 °C

Measure relative humidity and temperature extremely precisely: with the plug-in, digital humidity and temperature probe (Ø 12 mm).

Delivery Scope

Plug-in temperature probe 0572 2154.

MA845 DO - Dissolved Oxygen Probe Polar Probe with 2 Meter Cable - Use with Both MW190 Only by Milwaukee

The Milwaukee MA845 is a polarographic replacement probe for the MW190 MAX Dissolved Oxygen Bench Meter.

The refillable polarographic probe has an oxygen-permeable polytetrafluroethylene (PTFE) membrane sensor for measuring dissolved oxygen (DO) levels in aqueous solutions.

The probe uses a platinum cathode and a silver chloride anode which the MW190 MAX meter polarizes so that oxygen passing through the membrane can be measured to produce stable, accurate readings.

DESIGN FEATURES

• Reinforced plastic body for durability.
• Built in temperature sensor to achieve thermal equilibrium between the sensor and the sample for more accurate reading.
• 10 inches long with a tip that tapers from 1-1/2" to 3/4" in diameter.
• 6.5 (2 meter) foot cable with a 7-pin DIN connector for attaching to the meter.
• Uses MA841 D.O. Replacement Membranes Only.

AH1000-6X Ammonium Hydroxide, ACS Grade, 6x2.5L by AquaPhoenix

• CAS No. 1336-21-6
• NH4OH FW=35.05
• Ammonia Solution/UN2672

Specifications

• Packaging Type: Glass
• Size: 6 x 2.5 L

WD-35801-21 In-Line/Submersible, Double-junction ORP Electrode with Bulb Guard (Use with pH 100, 200, 800, and 1000 controllers) by Oakton

A. In-line submersible electrodes feature a probe guard to protect sensor from damage. They can be placed in a tee fitting for in-line use. CPVC body with 3/4" NPT thread on both ends withstands temperatures up to 80°C.

B. Submersible electrodes are permanently encapsulated in a 3-ft pipe - perfect for tank installation. ABS plastic body withstands temperatures up to 80°C.

C. Semi-domed bulb electrodes with solution ground have a unique surface design that protects electrode from particulates and increases flow across the junction to keep the bulb clean. Graphite body acts as a solution ground. Withstand temperatures up to 100°C.

D. Self-cleaning flat electrodes have an innovative flat surface that prevents solids buildup. CPVC body with 3/4" NPT thread on both ends withstands temperatures up to 80°C.

E. PTFE junction electrodes are excellent for simple wastewater applications. PTFE junction and polymer gel reference electrolyte resist clogging. CPVC body with 3/4" NPT thread on both ends withstands temperatures up to 80°C.

F. PTFE junction electrodes with solution ground are excellent for tough wastewater applications. Solution ground pin eliminates ground loop and electrical noise problems. PTFE junction and polymer gel reference electrolyte resist clogging. Ryton body with 3/4" NPT thread on both ends withstands temperatures up to 100°C.

• Include BNC connector
• Built-in Pt RTD sensor with stripped ends for temperature (ATC) element
• ORP electrodes feature Pt band sensor
• Use electrodes with solution ground with our pH 200, 800, or 1000 controllers in areas with high electrical noise

*Please note we can only ship RKI products to customers within the United States

0563 0510 01 510 Pressure Set by Testo

The testo 510 is very handy, small and easy to operate. It measures differential pressure in a range of 0 to 40 inH2O. The differential pressure measurement is temperature-compensated for accurate measurement values which can be displayed in Inches of Water Column over the entire measurement range. Magnets on the back of the 510 permit free-hand work. The backlit display allows the measurement values to be easily read out, even in unfavorable light conditions.

The testo 510, in combination with an optional Pitot tube, measures air flow velocity. For accurate measurement values, the air density can be compensated.

• Differential pressure measurement 0 to 40 inH₂O
• Flow velocity measurement possible with Pitot tube
• Temperature and air density compensation
• Backlit LED Display
• 10 selectable units of measure
• Includes silicone hoses

Kit Includes:

• 0560 0510 Differential Pressure Meter with Air Velocity
• 2 x silicone hose

*Please note we can only ship RKI products to customers within the United States

0563 1080 108 Type K Waterproof Food Thermometer by Testo

In the food industry, temperature measurements are part of the daily routine. The quality of the products can only be tested and guaranteed by precise measurements. And this is also the only way to fulfil HACCP regulations.The testo 108 carries out spot-check measurements in seconds. Whether in the transport and storage of foods, in restaurants, in large kitchens or in chain restaurants.

Thanks to the softcase (protective cover). It is insensitive to moisture and water, and is safe from damage due to impact or dirt. Wherever temperature needs to be recorded, this instrument measures everything which is necessary.

• Easy operation and handling
• Instrument and probe waterproof (IP67)
• Conform to HACCP and EN 13485
• Universally applicable

Part Number: CGQ5811

MA873 Digital Glucose Refractometer by Milwaukee

Thousands of food and beverage professionals and hobbyists, from chefs and food quality professionals and beverage manufacturers have moved to digital Glucose measurement from less accurate and less precise optical refractometers for sugar analysis.

WHAT PEOPLE ARE SAYING

"Anyone who makes jams or beverages should find this product one of the best investments they make on any piece of equipment."

"I am in love with this instrument. No more large samples. No more phony readings from badly made refractometers."

"Dramatically improved my commercial production consistency & efficiency.

"I used this for finishing jams and jellys. I had been trying to determine fructose content using a traditional optical refractometer. I found it very difficult to use. The digital refractometer was much easier."

SUMMARY

The Milwaukee digital Glucose refractometer is temperature compensated with a 0 to 85% Mass Glucose range and +/- 0.2 percent accuracy. It is easy to use with simple two button operation and fast with a response time under 2 seconds. Maintenance is a breeze also with an easy-to-clean sealed flint glass prism and stainless steel well.

DESIGN FEATURES

• Fast, accurate results with digital dual level LCD readout.
• Easy measurement with just 2-3 drops of sample needed and results less than 2 seconds.
• Simple one-point calibration using distilled or deionized water.
• Easy to clean, stainless steel sample well with unit rated to IP65 as "dust tight" and protected against water jets.
• Battery percent level indicator with automatic shut-off (batteries included).
• Ideal for beverage producers, fruit and vegetable growers, syrup producers, and food producers.
• The measurement technique and temperature compensation employ methodology. recommended in the ICUMSA Methods Book (Internationally recognized body for Sugar Analysis).

AM-DS0815 8"x15' Duct with Cinch Strap by Schaefer

Industry standard quality ducting for everyday use. Single ply, PVC vinyl-coated polyester fabric with 15-gage spring steel wire helix and external PVC wearstrip. PVC coated polyester fastening cuffs at both ends with industry standard spring buckle cinches. Flame retardant. Available in 8" (15', 25'), 12" (15', 25') and 20" (25') sizes. Integrated carrying bags available with 8"x 25', 12"x 25' and 20"x 25' ducts.

S273CDTC Comb pH Electrode with Hemi-pH Glass by Sensorex

This series of electrodes is designed to provide an economical multi-purpose solution for in-line or submersion pH measurements. Based on our proven S200C bulb and S350CD flat surface pH glass technology, these rugged and durable electrodes are available in Ryton nipples with 1/2" or 3/4" NPT threads; or in our durable epoxy body with or without quick disconnect top caps. Choose from single or double junction designs, flat or recessed measuring surface configurations and cable lengths and connectors as required.

• Economical design for in-line or submersion use
• Choose from single or double junction models
• Threaded 1/2" or 3/4" NPT connections
• Choose from spherical or flat pH measuring surfaces
• Special models for low ionic and other specialty applications available