$15 - $20

BU5003-P Buffer, pH 3.00, 500mL by AquaPhoenix

• ± 0.02 at 25°C

pH Buffer should be used regularly, typically every day the meter is used to calibrate your pH meters. Pour buffer into a clean separate container and never return used or unused buffer back into the container. Always keep tightly capped and adhere to the expiration date which is printed on the label.

Traceable to NIST

Specifications

• Packaging Type: Poly
• Size: 500mL
• pH Value: 3.0

GHS1297LP Single Blank Paper Supplier Label (8.5" x 14") by GHS Safety

GHS pre-printed drum labels come with your choice of pictogram that meets the UN recommendations on the Transport of Dangerous Goods. These labels make an excellent choice for short production runs or re-labeling of product for transportation. These labels are made from a Laser Printable Paper for indoor use or Vinyl stock with a permanent peel and stick adhesive for extended use in outdoor conditions.

Use any desktop publishing package to quickly make your own transportation labels.

Available in 8.5" x 14" size and packaged in a bundles of 100 sheets.

BU5918-P Buffer, pH 9.18, 500mL by AquaPhoenix

• ± 0.02 at 25°C

pH Buffer should be used regularly, typically every day the meter is used to calibrate your pH meters. Pour buffer into a clean separate container and never return used or unused buffer back into the container. Always keep tightly capped and adhere to the expiration date which is printed on the label.

Traceable to NIST

Specifications

• Packaging Type: Poly
• Size: 500 mL
• pH Value: 9.18

IL-250 Test Strips: Lo Iodine, 0-12.5-25-50 ppm by AquaPhoenix

Lo Iodine Test Kit, 0-12.5-25-50 ppm / The Hydrion Lo Iodine Kit provides an easy way to estimate the amount of titratable iodine in sanitizing solutions made with commercial iodophors. The color chart is easy to read and has color matches at 0-12.5-25-50ppm(parts per million) of titratable iodine., Each kit contains one 15-foot roll of iodine test paper, matching color chart, and two sample tubes with caps. In addition there is one extra roll of iodine test paper and a laminated color chart. Provides for approximately 200 tests.

CAREKITPHL Probe Care Kit - pH by Bluelab

Probe cleaning is one of the most important parts of owning or operating any Bluelab® meter, monitor or controller.

The probe surface is where the instrument takes the reading of the solution or soil/media. If the probe face is dirty or contaminated, then the reading will be inaccurate.

Accurate readings simplify crop management and provide improved growth.

Use Bluelab® Solutions to re-stock your probe care kit.

Features

• 20ml / 0.67fl oz single-use Bluelab Solution Sachets, 2 each of: pH 7.0 & pH 4.0 and KCl
• 3 plastic cups
• Bluelab® pH Probe Cleaner
• Bluelab® Toothbrush (pH probe cleaning instrument)

MA9001 pH 1.68 @ °C/77 °F Calibration Buffer Solution: accuracy +/- 0.01 pH - 230 ml by Milwaukee

Probe calibration is a simple procedure for optimal performance and should be done any time your readings become suspect. Calibration should be performed at least once a month.

MA9001 is a lab grade pH 1.68 buffer solution certified to meet the standard to an accuracy of ±0.01 pH removing the inaccuracies involved with mixing buffers.

Milwaukee solutions are designed to help you achieve reliable and repeatable pH measurements while extending the life of your electrode.

DESIGN FEATURES

• pH 1.68 Calibration Buffer Solution (230 mL)
• Fundamental for the correct use of electrodes and for obtaining the most accurate and reproducible readings
• Sealed against light with air tight, tamper proof cap
• Ideal for fast calibration
• Simply open, pour into a beaker or container and insert the tester or electrode to start the calibration process.

SA1590-P Sulfuric Acid, 0.5N, 500mL by AquaPhoenix

• Traceable to NIST
• Sulfuric Acid/UN2796

Specifications

• Concentration: 0.5N
• Packaging Type: Poly
• Size: 500 mL

MA9064 80,000 μS/cm Conductivity Calibration Solution - 230 ml Bottle by Milwaukee

The performance of conductivity probes are affected by use due to residue build up and aging.

MA9064 is a lab grade 80,000 μS/cm conductivity solution standard prepared against a NIST traceable potassium chloride solution that allows you to recalibrate your conductivity meter or tester. Check your meter or tester's manual to find the correct calibration standard for your meter.

Conductivity readings are effected by temperature. To help with this, a chart of the actual μS/cm value at various temperatures is printed on each bottle

Milwaukee conductivity solutions are labeled with the lot number and expiration date and packaged in an air tight, tamper-proof sealed bottle.

DESIGN FEATURES

• Fundamental for accurate conductivity measurement.
• Factory calibrated with potassium chloride NIST 2202 SRM (Standard Reference Material) in deionized water for analytical use in accordance with ISO 3696/BS3978.
• Sealed against light with air tight, tamper proof cap.
• Each 230 mL bottle is marked with lot number and expiration date.
• A temperature chart of the actual µS/cm value at various temperatures is printed on each bottle.
• 5 year expiry date.

BU5002-P Buffer, pH 2.00, 500mL by AquaPhoenix

• ± 0.02 at 25°C

pH Buffer should be used regularly, typically every day the meter is used to calibrate your pH meters. Pour buffer into a clean separate container and never return used or unused buffer back into the container. Always keep tightly capped and adhere to the expiration date which is printed on the label.

Traceable to NIST

Specifications

• Packaging Type: Poly
• Size: 500 mL
• pH Value: 2.0

BU5006-P Buffer, pH 6.00, 500mL by AquaPhoenix

• ± 0.02 at 25°C

pH Buffer should be used regularly, typically every day the meter is used to calibrate your pH meters. Pour buffer into a clean separate container and never return used or unused buffer back into the container. Always keep tightly capped and adhere to the expiration date which is printed on the label.

Traceable to NIST

Specifications

• Packaging Type: Poly
• Size: 500 mL
• pH Value: 6.0

MA9069 5000 μS/cm Conductivity Calibration solution - 230 ml Bottle by Milwaukee

The performance of conductivity probes are affected by use due to residue build up and aging.

MA9069 is a lab grade 5000 μS/cm conductivity solution standard prepared against a NIST traceable potassium chloride solution that allows you to recalibrate your conductivity meter or tester. Check your meter or tester's manual to find the correct calibration standard for your meter.

Conductivity readings are effected by temperature. To help with this, a chart of the actual μS/cm value at various temperatures is printed on each bottle

Milwaukee conductivity solutions are labeled with the lot number and expiration date and packaged in an air tight, tamper-proof sealed bottle.

DESIGN FEATURES

• Fundamental for accurate conductivity measurement.
• Factory calibrated with potassium chloride NIST 2202 SRM (Standard Reference Material) in deionized water for analytical use in accordance with ISO 3696/BS3978.
• Sealed against light with air tight, tamper proof cap.
• Each 230 mL bottle is marked with lot number and expiration date.
• A temperature chart of the actual µS/cm value at various temperatures is printed on each bottle.
• 5 year expiry date.

SB-7500-P Bottle, Nalgene Sample Bottle 500 mL by AquaPhoenix

Nalgene® Wide-Mouth HDPE bottles are durable, translucent and leakproof. These general-purpose bottles are ideal for collecting samples in the lab or field. Available in 250 or 500 mL.

C-9501 Sulfide Comparator (round) by AquaPhoenix

C-9501 Round Sulfide Comparator is a component of K-9510 Sulfide CHEMets Visual Test Kit and is designed to be compared against the color formed in R-9510 Sulfide CHEMets Refill. The comparator's range is applicable to many industrial applications. Color standards are blue in color and cover a range of 0-1.0 ppm sulfide.

90433-40 Thermowell, Brass, Standard, 1/2" NPT (M), 4" Stem by Digi-Sense

To match your probe to a thermowell, first measure the distance from the probe's tip to the top of the thread (typical thread length is 0.5" for 1/2" NPT fittings). Next, match this length to the probe depth of the thermowell ("A" dimension). Other thermowell sizes and materials are available - call our Application Specialists for more information.

• Limited-Space Thermowell when you need a shorter insertion depth.
• Standard Thermowell for general-purpose applications.
• Heavy-Duty Thermowell for higher fluid velocity ratings.