$15 - $20

GHS1302 FDS Awareness 4" x 4" Label (25/pack) by GHS Safety

These SDS decals can be used on the binder pockets of GHS Information Stations or simply add it to a wall or storage area for your SDS information. Decals are 4" by 4" (100mm x 100mm) and come in sheets with 10 per pack. Printed on peel and stick vinyl.

Part Number: W03-2009-000

A-1800 Activator Solution Pack by AquaPhoenix

The A-1800 Carbohydrazide Activator Accessory Solution Pack contains six 10 mL bottles of the activator solution necessary to perfrom analysis of carbohydrazide in water. This solution is found in K-1805 Carbohydrazide CHEMets® Test Kit. This pack is meant as a refill for those who have already used their provided solution or who need to have solutions at multiple locations.

MA9065 111,800 μS/cm Conductivity Calibration Solution - 230 ml Bottle by Milwaukee

The performance of conductivity probes are affected by use due to residue build up and aging.

MA9065 is a lab grade 111,800 μS/cm conductivity solution standard prepared against a NIST traceable potassium chloride solution that allows you to recalibrate your conductivity meter or tester. Check your meter or tester's manual to find the correct calibration standard for your meter.

Conductivity readings are effected by temperature. To help with this, a chart of the actual μS/cm value at various temperatures is printed on each bottle

Milwaukee conductivity solutions are labeled with the lot number and expiration date and packaged in an air tight, tamper-proof sealed bottle.

DESIGN FEATURES

• Fundamental for accurate conductivity measurement.
• Factory calibrated with potassium chloride NIST 2202 SRM (Standard Reference Material) in deionized water for analytical use in accordance with ISO 3696/BS3978.
• Sealed against light with air tight, tamper proof cap.
• Each 230 mL bottle is marked with lot number and expiration date.
• A temperature chart of the actual µS/cm value at various temperatures is printed on each bottle.
• 5 year expiry date.

411-0018-038 Last-O-More Tubing 3x5 mm per Meter by WatchGas

Regarding sampling tubes for gas detectors, many manufacturers promote clear tubing as a cost-effective solution for drawing air from confined spaces. While affordability may be a key selling point, it's essential to recognize the limitations of clear tubing in gas detection.

In the automotive industry, clear tubing is avoided for crucial systems like fuel and windshield fluids because it lacks the necessary inertness. The same principle applies to gas detection. Some argue that clear tubing offers two benefits: it allows visibility of fluid intake, and discoloration signals the need for replacement. However, once a fluid is drawn into the tube, contamination of the inner walls occurs, requiring immediate replacement. Best practices call for avoiding fluid intake altogether, which is why devices like ball floats are used—visible, such as the yellow one pictured.

Discoloration of clear tubing often points to a reaction between the sampled gases and the tubing material itself, proving the material's unsuitability rather than providing a reliable replacement indicator.

Inexpensive aquarium tubing made from PVC is commonly repurposed for gas detection, but PVC's inherent odour is a clear sign it's not suitable. While there are other, more promising materials—such as those with Teflon inner linings—these are no longer cheap, and Teflon can flake, causing blockages.

That's why we developed Last-O-More tubing, made from fluorinated elastomer (rubber). It's inert, doesn't flake, is highly flexible, and resists binding. Plus, it's explicitly marked as a gas sampling tube to ensure correct use.

While not the cheapest option, Last-O-More tubing has been rigorously tested in the lab using GC analysis. It has proven to be the best in absorption and retention—retention, meaning the release of absorbed gases when exposed to heat (like sunlight).

Last-O-More tubing is black, so always pair it with a ball float or water trap (filter) and replace it when it no longer feels slippery. Proper tubing is critical in gas detection—don't compromise safety.

AI1106 3M KCl Storage Solution 8 oz. by Apera

This storage solution is for conditioning and extending the service life of regular pH and ORP electrodes/testers/sensors. pH/ORP electrodes that are stored dry will lose their sensitivity and accuracy temporarily. They can be restored by soaking in the KCL solution. Keeping pH/ORP electrodes stored in the storage solution when not in use is a recommended practice. The storage solution works well for Apera Instruments regular pH and ORP meters and electrodes e.g. PH20, PH60, 201T-F, 301PT-C.

Expiration date specified on the bottle.

Content: 3M KCL solution

Volume: 4oz.

AI1121 pH 1.68 Calibration Buffer Solution 8oz by Apera

The Apera Instruments AI1121 pH 1.68 Calibration Buffer Solution is color-coded and standardized against NIST certified pH references within 0.01 pH at 25°C (77°F). It's ideal for the calibration of pH meters/testers that can automatically recognize pH 1.68 standard e.g. Apera PH60, PH700, PH800, PC400S. Since pH level is affected by temperature, a temperature/pH reference chart is provided on the bottle label for reference.

All the solutions are double-sealed, not subject to the DOT shipping restrictions, and have a 2-year shelf life. The expiration date is printed on the bottle.

MSDS documents are downloadable. Certificate of analysis can be achieved by request.

Note: Store at room temperature and away from direct sunlight. Keep the bottle tightly closed when not in use. Keep out of reach of children.

• High Accuracy (±0.01 pH): standardized against NIST certified pH references within 0.01 pH at 25°C (77°F).
• For the calibration of pH meters/testers that can recognize pH 1.68 solution
• Double-sealed, 2-Year shelf life
• Expiration date and Temperature/pH reference chart provided for reference
• Non-hazardous product (MSDS is downloadable)

08007-22 Pocket Liquid-In-Glass Thermometer; 20 to 110F, Window Plastic Case, Organic Liquid Fill by Digi-Sense

These thermometers are ideal for use in laboratory, biology, chemistry, university, photographic, food/beverage, petrochemical, automotive, wastewater and many other general purpose applications. The protective plastic case protects these thermometers from accidental breakage during use and storage. The section of the case that surrounds the bulb has small openings for circulation. All DURAC Plus® thermometers feature markings that are permanently printed on the glass, blue spirit liquid that has a dark scale contrasts against a white background.

• Non-mercury blue spirit liquid

Includes

Rugged plastic case with an eyelet at the top for easy suspension

MA9001 pH 1.68 @ °C/77 °F Calibration Buffer Solution: accuracy +/- 0.01 pH - 230 ml by Milwaukee

Probe calibration is a simple procedure for optimal performance and should be done any time your readings become suspect. Calibration should be performed at least once a month.

MA9001 is a lab grade pH 1.68 buffer solution certified to meet the standard to an accuracy of ±0.01 pH removing the inaccuracies involved with mixing buffers.

Milwaukee solutions are designed to help you achieve reliable and repeatable pH measurements while extending the life of your electrode.

DESIGN FEATURES

• pH 1.68 Calibration Buffer Solution (230 mL)
• Fundamental for the correct use of electrodes and for obtaining the most accurate and reproducible readings
• Sealed against light with air tight, tamper proof cap
• Ideal for fast calibration
• Simply open, pour into a beaker or container and insert the tester or electrode to start the calibration process.

MA9006 pH 6.86 Calibration Buffer Solution @ 25 °C/77 °F: accuracy +/- 0.01 pH - 230 ml by Milwaukee

Probe calibration is a simple procedure for optimal performance and should be done any time your readings become suspect. Calibration should be performed at least once a month.

MA9006 is a lab grade pH 6.86 buffer solution certified to meet the standard to an accuracy of ±0.01 pH removing the inaccuracies involved with mixing buffers.

Milwaukee solutions are designed to help you achieve reliable and repeatable pH measurements while extending the life of your electrode.

DESIGN FEATURES

• pH 6.86 Calibration Buffer Solution (230 mL)
• Fundamental for the correct use of electrodes and for obtaining the most accurate and reproducible readings
• Sealed against light with air tight, tamper proof cap
• Ideal for fast calibration
• Simply open, pour into a beaker or container and insert the tester or electrode to start the calibration process.

TDS15000/P Conductivity Solution, 15,000ppm/16,630uS, 1Pt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

90260-55 Pocket Liquid-In-Glass Thermometer; -10 to 110C, Window Plastic Case, Organic Liquid Fill by Digi-Sense

These thermometers are ideal for use in laboratory, biology, chemistry, university, photographic, food/beverage, petrochemical, automotive, wastewater and many other general purpose applications. The protective plastic case protects these thermometers from accidental breakage during use and storage. The section of the case that surrounds the bulb has small openings for circulation. All DURAC Plus® thermometers feature markings that are permanently printed on the glass, blue spirit liquid that has a dark scale contrasts against a white background.

• Non-mercury blue spirit liquid
• Plastic case with window

Includes

Rugged plastic case with an eyelet at the top for easy suspension

TDSK80000/P Potassium Chloride TDS Solution, 80000uS/cm (Pt) by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)