$15 - $20

18526-32 Type K Economic Bolt On Thermocouple Probe #6 Screw 24" Fiberglass Ext. Grounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C).

• Available in #6 (M3.5) or #8 (M4) screw sizes and different lead lenghts
• Response Time: 2-4 seconds or greater
• Each probe comes with a color coded ANSI mini connector or stripped leads: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

A-5500 Activator Solution Pack by AquaPhoenix

The A-5500 accessory pack supplies enough solution to perform at least 200 tests.

A-6002 Activator Solution Pack by AquaPhoenix

The accessory pack supplies enough solution to perform at least 200 tests. This accessory solution pack is designed to refill K-6002 Iron in brine test kits.

AI7112 8-pin Connection Adapter for 60 Series Testers by Apera

This is the 8-pin Connection Adapter for 60 Series Testers that allows the 60 series and 60-Z Series pocket testers to use electrodes with 8-pin connector.

C-9400 Detergents Comparator (round) by AquaPhoenix

C-9400 Detergents Comparator is a component of K-9400 Detergents (anionic surfactants, MBAS) CHEMets Visual Test Kit and is designed to be compared against the color formed in R-9400 Detergents CHEMets Refill. The comparator's range is applicable to many disinfection and stormwater applications. Color standards are blue in color and cover a range of 0-3.0 ppm linear alkylbenzene sulfonate (LAS).

Non-Conductive Mount Kit installed at Factory

C-3901 DEHA Comparator (round) by AquaPhoenix

C-3901 Low Range DEHA Comparator is a component of K-3902 DEHA CHEMets Visual Test Kit and is designed to be compared against the color formed in R-3902 DEHA CHEMets Refill. The comparator's range is applicable for many boiler water applications. Color standards are pink to purple in color and cover a range of 0-400 ppb DEHA.

TDS3000/P Conductivity Solution, 3000ppm/3900uS, 1Pt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

A-4400 Activator Solution Pack by AquaPhoenix

The accessory pack supplies enough solution to perform at least 200 tests. This accessory solution pack is designed to refill the K-4815 Glycol CHEMets® test kit

C-1805 Carbohydrazide Comparator (round) by AquaPhoenix

The C-1805 Round Carbohydrazide Comparator is a component of K-1805 Carbohydrazide CHEMets® Test Kit and is designed to be compared against the color formed in the R-3902 DEHA/Carbohydrazide CHEMets® Refill. The comparator's range is applicable for many boiler applications. Color standards are peach to pink in color and cover a range of 0-0.50 ppm carbohydrazide.

CS0447-P Conductivity Standard, 447 μS/cm, 500mL by AquaPhoenix

• Traceable to NIST

Specifications

• Packaging Type: Poly
• Size: 500 mL

CS0100-P Conductivity Standard, 100 μS/cm, 500mL by AquaPhoenix

• Traceable to NIST

Specifications

• Packaging Type: Poly
• Size: 500 mL

C-1002 Filming Amine - Round by AquaPhoenix

The C-1002 Round Filming Amine Comparator is a component of K-1006 Filming Amine CHEMets® Test Kit (Rose Bengal) and is designed to be compared against the color formed in R-1006 Filming Amines CHEMets® Refill (Rose Bengal) ampoules.

The kit's range is applicable for routine measurement of residual filming amines in boiler feedwater. The comparator contains a set of color standards (sealed ampoules) containing dye mixtures that are formulated to match the colors produced by the test ampoules. The color standards are pink in color and cover a range of 0-2 ppm octadecylamine (ODA).

18526-21 Type J Economic Bolt On Thermocouple Probe #6 Screw 12" Fiberglass Ext. Grounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C).

• Available in #6 (M3.5) or #8 (M4) screw sizes and different lead lenghts
• Response Time: 2-4 seconds or greater
• Each probe comes with a color coded ANSI mini connector or stripped leads: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request