$15 - $20

TDS150/P Conductivity Solution, 150ppm/229uS, 1Pt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

TDS60000/P Conductivity Solution, 60,000ppm/60,000uS, 1Pt1 by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

C-3801 Cyanide Comparator (round), Free by AquaPhoenix

C-3801 Low Range Cyanide Comparator is a component of K-3810 Cyanide (free) CHEMets Visual Test Kit and is designed to be compared against the color formed in R-3810 Cyanide (free) CHEMets Refill. The comparator's range is applicable for many drinking water and surface water applications. Color standards are blue in color and cover a range of 0-0.10 ppm cyanide (CN-).

18526-37 Type T Economic Bolt On Thermocouple Probe #8 Screw 24" Fiberglass Ext. Grounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C).

• Available in #6 (M3.5) or #8 (M4) screw sizes and different lead lenghts
• Response Time: 2-4 seconds or greater
• Each probe comes with a color coded ANSI mini connector or stripped leads: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

PI8005-P Potassium lodide-lodate, 0.0125N (N/80), 500mL by AquaPhoenix

• Traceable to NIST

Specifications

• Packaging Type: Poly
• Size: 500 mL
• Concentration: 0.0125N

A-4201 Activator Solution Pack by AquaPhoenix

The accessory pack supplies enough solution to perform at least 200 tests. This accessory solution pack is designed to refill K-4815 Glycol CHEMets® test kit and K-4605 Formaldehyde CHEMets® test kit.

A-2800 Acidifier Solution Pack by AquaPhoenix

The Chromate Acidifier Solution A-2800 accessory pack supplies enough solution to perform at least 200 tests.

C-4601 Formaldehyde Comparator (round) by AquaPhoenix

C-4601 Low Range Formaldehyde Comparator is a component of K-4605 Formaldehyde CHEMets Visual Test Kit and is designed to be compared against the color formed in R-4815 Glycol/Formaldehyde CHEMets Refill. The comparator's range is applicable for many boiler water applications. Color standards are pink to purple in color and cover a range of 0-1.0 ppm Formaldehyde.

C-5015C Hydrazine Comparator (round) by AquaPhoenix

The C-5015C Round Hydrazine Comparator (0-500 ppm) is a component of the K-5020C Hydrazine HR CHEMets® test kit. It is designed to be compared against the color formed in the R-5005 Hydrazine CHEMets® Refill. This comparator is applicable to many boiler and cooling applications. The color standards contain yellow dye mixtures that are formulated to match the colors produced by the test ampoules.

C-6001 Iron Comparator (round) by AquaPhoenix

C-6001 Iron Comparator is a component of K-6210 Iron (total & ferrous) CHEMets Visual Test Kit and K-6010 Iron (total & soluble) CHEMets Visual Kit is designed to be compared against the color formed in R-6201 Iron CHEMets Refill and R-6001 Iron CHEMets Refill. The comparator's range is applicable to many applications including surface and industrial process waters. Color standards are orange in color and cover a range of 0-1 ppm iron (Fe).

93605-42 Industrial Thermocouple Element, 6" L, 20gauge, K Type by Digi-Sense

Elements with in an industrial thermocouple that includes a thermowells that deteriorate over time can be replaced as a more cost effective solution. Each replacement element is made of 20 gauge wire and is encased with ceramic insulators for a greater degree of protection.

SH6202-P Sodium Hydroxide, 0.2N, 500mL by AquaPhoenix

• Traceable to NIST
• Sodium Hydroxide Solution/UN1824

Specifications

• Concentration: 0.2N
• Packaging Type: Poly
• Size: 500mL

0554 2016 Grommet for Extension S1 Sensor by Testo

The display cabinet bushing for the temperature and humidity probe (0572 2156) is required to mounting the probe inside the display case. To install the display cabinet bushing in the base plate you will need a 20-mm diameter hole. The temperature and humidity probe inserts into the bushing and connects it to the Wi-Fi probe with an extension cable. The internal micro-climate of the display case will not be affected since both, the bushing and the temp/rH probe, are designed to prevent the air leak.

• An O-ring seal on the probe fits inside the bushing to prevent the air leak.

Includes:

Display cabinet bushing for humidity and temperature probe 0572 2156.