$15 - $20

C-6502 Manganese Comparator (round) by AquaPhoenix

C-6502 Manganese Comparator is a component of K-6502 Manganese CHEMets Visual Test Kit and is designed to be compared against the color formed in R-6502 Manganese CHEMets Refill. The comparator's range is applicable to many industrial and drinking water applications. Color standards are pink in color and cover a range of 0-2 mg/L manganese (Mn).

A-4202 Activator Solution Pack by AquaPhoenix

The Formaldehyde activator solution accessory pack supplies enough solution to perform at least 200 tests. This accessory solution pack is designed to refill K-4815 Glycol CHEMets® test kit and K-4605 Formaldehyde CHEMets® test kit.

TDS5687/P Conductivity Solution, 5687ppm/7000uS, 1Pt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

BB5025-P Bromothymol Blue Indicator Solution, 0.04% w/v, 500mL by AquaPhoenix

• pH 6.0 (yellow) - 7.6 (blue)

Specifications

• Packaging Type: Poly
• Concentration: 0.04% w/v
• Size: 500 mL
• pH Value: 6.0-7.6

TDS30000/P Conductivity Solution, 30,000ppm/30,100uS,1Pt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

0554 2015 Wall Mount for testo 160 IAQ by Testo

Attach your Wi-Fi data logger to the wall using the wall bracket for testo 160 IAQ.

• For attaching the testo 160 IAQ data logger to the wall
• Comes with cut outs for screws and cable ties
• Can also be used with adhesive strips

Includes:

1 x wall bracket, including the unlocking key and double-sided adhesive strips.

SH6232-P Sodium Hydroxide, 0.5N, 500mL by AquaPhoenix

• Traceable to NIST
• Sodium Hydroxide Solution/UN1824

Specifications

• Concentration: 0.5N
• Packaging Type: Poly
• Size: 500 mL

A-1501 Stabilizer Solution Pack by AquaPhoenix

The A-1501 Ammonia Stabilizer Accessory Solution Pack for Saltwater Analysis is used in conjunction with the Ammonia test kits K-1513 and K-1510 for seawater or saltwater analysis.

This pack supplies enough solution to analyze approximately 100 seawater samples.

0564 1002 Vacuum Pump Oil by Testo

• For use with testo 565i 7CFM/198 l/min and10 CFM / 283 l/min Vacumum Pumps
• Highly refined for top performance
• Ensures proper sealing and lubrication
• Excellent vacuum sealing performance
• Suitable for wide temperature range

Delivery Scope

• 1 x vacuum pump oil, 330 ml

C-9001 Silica Comparator (round) by AquaPhoenix

C-9001 Low Range Silica Comparator is a component of K-9010 Silica CHEMets Visual Test Kit and is designed to be compared against the color formed in R-9010 Silica CHEMets Refill. The comparator's range is applicable to many industrial applications. Color standards are blue in color and cover a range of 0-1.0 ppm SiO2.

C-1601 Bromine Comparator (round) by AquaPhoenix

C-1601 Round Bromine Comparator is a component of K-1605 Bromine CHEMets® Test Kit and is designed to be compared against the color formed in R-7904 Bromine/PAA/Peroxide CHEMets® Refill. The comparator's range is applicable for many disinfection applications where bromine is used. Color standards are pink in color and cover a range of 0-2.2 ppm Bromine (Br2).

TDSK12880/P Potassium Chloride TDS Solution, 12880uS/cm (Pt) by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

DW4000-Q Deionized Water, ACS Grade, 1L by AquaPhoenix

• Type II equivalent

Specifications

• Packaging Type: Poly
• Size: 1.00 L

C-5005 Hydrazine Comparator (round) by AquaPhoenix

C-5005 Hydrazine Comparator is a component of K-5005 Hydrazine CHEMets Visual Test Kit and is designed to be compared against the color formed in R-5005 Hydrazine CHEMets Refill. The comparator's range is applicable for many boiler water applications. Color standards are yellow in color and cover a range of 0-0.5 ppm hydrazine.

C-8001 Phenols Comparator (round) by AquaPhoenix

C-8001 Low Range Phenols Comparator is a component of K-8012 Phenols CHEMets Visual Test Kit and is designed to be compared against the color formed in R-8012 Phenols CHEMets Refill. The comparator's range is applicable to many wastewater and disinfection applications. Color standards are pink to red in color and cover a range of 0-1.0 ppm phenols.

18526-36 Type J Economic Bolt On Thermocouple Probe #8 Screw 24" Fiberglass Ext. Grounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C).

• Available in #6 (M3.5) or #8 (M4) screw sizes and different lead lenghts
• Response Time: 2-4 seconds or greater
• Each probe comes with a color coded ANSI mini connector or stripped leads: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request