$1000 - $2000

FD-H32 Keyence Clamp On Flow/Temp Meter, 1.0 in. & 1.25 in. Pipe, 4 Channels by Quantrol

Features

• Display of flow rate and temperature - FDH and FDR Series.
• Onboard graphing and historical data.
• Installs in vertical or horizontal pipe.
• Detects flow through metal or resin pipe.
• Easy clamp-on installation.
• No chance of damage from water hammer or clogging.
• FD-H models require 24 to 30VDC power supply.
• FD-R models require 24 to 30VDC or 120VAC.

Control Options

• Dry Contact Pulse Output - User settable GPC or LPC
• 4-20 or 0-20 mA Output - Flow rate and/or temperature
• Flow Switch - User settable GPM or LPM
• Low Flow Alarm - User settable GPM or LPM

FD-Q32C Keyence Clamp On Flow Meter, 1.0 in. & 1.25 in. Pipe by Quantrol

Features

• Display of flow rate and temperature - FDH and FDR Series.
• Onboard graphing and historical data.
• Installs in vertical or horizontal pipe.
• Detects flow through metal or resin pipe.
• Easy clamp-on installation.
• No chance of damage from water hammer or clogging.
• FD-H models require 24 to 30VDC power supply.
• FD-R models require 24 to 30VDC or 120VAC.

Control Options

• Dry Contact Pulse Output - User settable GPC or LPC
• 4-20 or 0-20 mA Output - Flow rate and/or temperature
• Flow Switch - User settable GPM or LPM
• Low Flow Alarm - User settable GPM or LPM

FD-Q50C Keyence Clamp On Flow Meter, 1.5 in. & 2.0 in. Pipe by Quantrol

Features

• Display of flow rate and temperature - FDH and FDR Series.
• Onboard graphing and historical data.
• Installs in vertical or horizontal pipe.
• Detects flow through metal or resin pipe.
• Easy clamp-on installation.
• No chance of damage from water hammer or clogging.
• FD-H models require 24 to 30VDC power supply.
• FD-R models require 24 to 30VDC or 120VAC.

Control Options

• Dry Contact Pulse Output - User settable GPC or LPC
• 4-20 or 0-20 mA Output - Flow rate and/or temperature
• Flow Switch - User settable GPM or LPM
• Low Flow Alarm - User settable GPM or LPM

TD2 Acoustic Imaging Camera, 64MEMS Digial Microphones by Fotric

Limitation of Human Perception

The human ear can only perceive sounds in the range of 20 Hz to 20 kHz. However, hidden faults such as gas leaks, bearing wear, and electrical discharges often emit much higher frequency ultrasound (>20 kHz) — sounds that are imperceptible to the human ear and beyond the capabilities of traditional stethoscopes or microphones.

How does it work?

• Microphone Array: Simultaneously captures sound signals from multiple sources to enhance spatial accuracy.
• Beamforming Algorithm: Focuses on sound sources from specific directions, filtering out environmental noise.
• Acoustic Image Overlay: Displays sound source locations as a heatmap over the image.
• Low-Latency Rendering Engine: Enables near-instant response, ideal for continuous inspection scenarios.

Beyond What's Audible

The FOTRIC TD2 acoustic imaging camera can detect not only audible sound (20Hz-20kHz), but also high-frequency ultrasonic signals that are beyond the range of human hearing. This means it can easily capture things like:

Tire air leaks

The TD2 quickly visualizes and locates tire leak points without the need for soap spray–precise, efficient, and easy to use.

Compressed Air System Leaks

As gas leaks emit high-frequency turbulence noise, the TD2 can quickly detect even the smallest leaks in compressed air pipelines.

Vacuum System Leaks

The TD2 precisely captures subtle leak sounds in vacuum systems that human ears cannot hear, enabling fast leak localization without contact or damage to equipment.

Loose Joint Vibration During Operation

The TD2 detects abnormal high-frequency sounds caused by loose screws while equipment is running. It visualizes and pinpoints the issue in real time without requiring a shutdown, helping maintenance teams address risks and ensure operational stability.

• High-density microphone array with 64 MEMS digital microphones
• Industrial digital camera: 13 MP, 66° × 52° field of view
• ≥ 4 hours of single-battery runtime, removable; device rated IP54
• Multiple imaging modes: single-source, multisource, and holographic
• Professional features: sound pressure level measurement, acoustic focusing

TK7 Industrial Grade Thermal Camera, Fixed Focus, IR resolution 384*288, Temperature Range -20C to 350C, Lens 49deg by Fotric

With Manual Focus for precise measurements at any distance and a robust build featuring 384x288 IR resolution and 40mK Thermal Sensitivity, FOTRIC TK8 is designed to be your gateway to professional thermography. Its user-friendly Android interface ensures an intuitive experience, while the choice of 25 degree lens options caters to diverse industries, from building inspections to HVAC and electric distribution. Plus, easily import inspection data into the AnalzyIR software via WiFi and generate reports with a single click.

Accurate Temperature Measurement

• Manual focus, ensures concise measurement at all distances.
• 49° wide angle shot, to always see the big picture. Help you infer the root of the thermal anomaly.
• 40mk thermal sensitivity, unveil subtle flaws. No damp spot ever escapes your sight.

Superior Image Quality

• 384*288 thermal pixels, presenting your findings with unprecedented clarity.
• Super resolution, boost the performance to expert level.
• T-DEF® Blend 0~100% adjustable transparency. Select the best way present your finding.
• Touch span to highlight the anomaly against the environment.

Robust and Intuitive Design

• Function shortcut button, tailor what the camera does to what you need.
• Spacious 3.5" LCD touch screen that enable both screen and button operation.
• 8MP industrial grade digital camera, enables flawless inspection result presentation.
• Dust and water resistant (IP54), made for durability and industrial adaptability.

Unparallel Response Speed

• Powered by Android, it flows as smoothly as your smartphone.
• Fluent remote control with every operation system (Windows, MacOS, Android, IOS), so you can access your work from everywhere.

TK8 Industrial Grade Thermal Camera, Manual Focus, IR resolution 384*288, Temperature Range -20C to 350C, Lens 25deg by Fotric

With Manual Focus for precise measurements at any distance and a robust build featuring 384x288 IR resolution and 40mK Thermal Sensitivity, FOTRIC TK8 is designed to be your gateway to professional thermography. Its user-friendly Android interface ensures an intuitive experience, while the choice of 25 degree lens options caters to diverse industries, from building inspections to HVAC and electric distribution. Plus, easily import inspection data into the AnalzyIR software via WiFi and generate reports with a single click.

Accurate Temperature Measurement

• Manual focus, ensures concise measurement at all distances.
• 49° wide angle shot, to always see the big picture. Help you infer the root of the thermal anomaly.
• 40mk thermal sensitivity, unveil subtle flaws. No damp spot ever escapes your sight.

Superior Image Quality

• 384*288 thermal pixels, presenting your findings with unprecedented clarity.
• Super resolution, boost the performance to expert level.
• T-DEF® Blend 0~100% adjustable transparency. Select the best way present your finding.
• Touch span to highlight the anomaly against the environment.

Robust and Intuitive Design

• Function shortcut button, tailor what the camera does to what you need.
• Spacious 3.5" LCD touch screen that enable both screen and button operation.
• 8MP industrial grade digital camera, enables flawless inspection result presentation.
• Dust and water resistant (IP54), made for durability and industrial adaptability.

Unparallel Response Speed

• Powered by Android, it flows as smoothly as your smartphone.
• Fluent remote control with every operation system (Windows, MacOS, Android, IOS), so you can access your work from everywhere.

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

GD-70D-ACET GD-70D Smart Transmitter, CH3COOH (acetic acid), 0-030 ppm by RKI Instruments

RKI Instruments has been making high quality gas detection and monitoring units for over 15 years. With an emphasis on safety and reliability, RKI Instruments excels at providing the best products in gas detection and sensor technology on the market. Every year, RKI strives to improve its product offering and scours the globe for the latest technologies and innovative designs. With the introduction of the GD-70D Series Intelligent Gas Detector, employers and workplace safety managers can feel confident that they have purchased a reliable detector that is built to last.

GD-70D Series Intelligent Gas Detector

The GD-70D Series Intelligent Gas Detector is a new smart gas detection transmitter that monitors combustibles, oxygen, and a wide range of toxic gases. The unit can be used as a standalone device, integrated with other PLC systems, or integrated with RKI's Beacon series of single and multi-channel controllers. Its common platform integrates numerous detection methods and requires very little maintenance.

Exclusive Features

The plug and play intelligent sensors make for easy setup and calibration by internally retaining calibration and sensor data. This allows workers to replace sensors while in the field without the need to reprogram the equipment. For little maintenance and optimal reliability, the internal technology automatically adjusts for long-term zero and span drift. The pump flow is also self-tuning for low maintenance functioning. In general, the smart sensors use electrochemical cell detection, semiconductor detection, pyrolysis-particle detection, galvanic cell detection, and catalytic combustion detection.

The GD-70D Series features a large LCD display that easily reads all notifications and provides a color coded graph for alarm status (first and second alarms are red, and fault alarms are yellow). The LCD screen displays the pyrolyzer connection, gas concentration, detection unit of measurement, the detected gas, the maintenance status, sensor identification, the flow rate, a graph of gas concentration, error codes, and alarm points. All operational settings are completely user adjustable from the front panel. The unit also has a self-diagnosing function which detects sensor trouble and system failure. The Intelligent Gas Detector has a convenient troubleshoot feature through its firmware. This allows users to investigate and resolve their own equipment issues while minimizing maintenance costs.

Specifications

The Intelligent Gas Detector is a convenient size for workplace and wall space efficiency with dimensions of 2.8 D x 4.7 H x 5.9 D and weighs approximately 2 pounds. It can be mounted to a wall easily with a base plate and 2 or 3 screws. Sensor replacements and pump replacements can be performed quick and easily without tools.

*Please note we can only ship RKI products to customers within the United States

GD-70D-BTBAS GD-70D Smart Transmitter, BTBAS, 0-15.0 ppm by RKI Instruments

RKI Instruments has been making high quality gas detection and monitoring units for over 15 years. With an emphasis on safety and reliability, RKI Instruments excels at providing the best products in gas detection and sensor technology on the market. Every year, RKI strives to improve its product offering and scours the globe for the latest technologies and innovative designs. With the introduction of the GD-70D Series Intelligent Gas Detector, employers and workplace safety managers can feel confident that they have purchased a reliable detector that is built to last.

GD-70D Series Intelligent Gas Detector

The GD-70D Series Intelligent Gas Detector is a new smart gas detection transmitter that monitors combustibles, oxygen, and a wide range of toxic gases. The unit can be used as a standalone device, integrated with other PLC systems, or integrated with RKI's Beacon series of single and multi-channel controllers. Its common platform integrates numerous detection methods and requires very little maintenance.

Exclusive Features

The plug and play intelligent sensors make for easy setup and calibration by internally retaining calibration and sensor data. This allows workers to replace sensors while in the field without the need to reprogram the equipment. For little maintenance and optimal reliability, the internal technology automatically adjusts for long-term zero and span drift. The pump flow is also self-tuning for low maintenance functioning. In general, the smart sensors use electrochemical cell detection, semiconductor detection, pyrolysis-particle detection, galvanic cell detection, and catalytic combustion detection.

The GD-70D Series features a large LCD display that easily reads all notifications and provides a color coded graph for alarm status (first and second alarms are red, and fault alarms are yellow). The LCD screen displays the pyrolyzer connection, gas concentration, detection unit of measurement, the detected gas, the maintenance status, sensor identification, the flow rate, a graph of gas concentration, error codes, and alarm points. All operational settings are completely user adjustable from the front panel. The unit also has a self-diagnosing function which detects sensor trouble and system failure. The Intelligent Gas Detector has a convenient troubleshoot feature through its firmware. This allows users to investigate and resolve their own equipment issues while minimizing maintenance costs.

Specifications

The Intelligent Gas Detector is a convenient size for workplace and wall space efficiency with dimensions of 2.8 D x 4.7 H x 5.9 D and weighs approximately 2 pounds. It can be mounted to a wall easily with a base plate and 2 or 3 screws. Sensor replacements and pump replacements can be performed quick and easily without tools.

*Please note we can only ship RKI products to customers within the United States

GD-70D-CH3NH2 GD-70D Smart Transmitter, CH3NH2, (methylamine), 0-15 ppm by RKI Instruments

RKI Instruments has been making high quality gas detection and monitoring units for over 15 years. With an emphasis on safety and reliability, RKI Instruments excels at providing the best products in gas detection and sensor technology on the market. Every year, RKI strives to improve its product offering and scours the globe for the latest technologies and innovative designs. With the introduction of the GD-70D Series Intelligent Gas Detector, employers and workplace safety managers can feel confident that they have purchased a reliable detector that is built to last.

GD-70D Series Intelligent Gas Detector

The GD-70D Series Intelligent Gas Detector is a new smart gas detection transmitter that monitors combustibles, oxygen, and a wide range of toxic gases. The unit can be used as a standalone device, integrated with other PLC systems, or integrated with RKI's Beacon series of single and multi-channel controllers. Its common platform integrates numerous detection methods and requires very little maintenance.

Exclusive Features

The plug and play intelligent sensors make for easy setup and calibration by internally retaining calibration and sensor data. This allows workers to replace sensors while in the field without the need to reprogram the equipment. For little maintenance and optimal reliability, the internal technology automatically adjusts for long-term zero and span drift. The pump flow is also self-tuning for low maintenance functioning. In general, the smart sensors use electrochemical cell detection, semiconductor detection, pyrolysis-particle detection, galvanic cell detection, and catalytic combustion detection.

The GD-70D Series features a large LCD display that easily reads all notifications and provides a color coded graph for alarm status (first and second alarms are red, and fault alarms are yellow). The LCD screen displays the pyrolyzer connection, gas concentration, detection unit of measurement, the detected gas, the maintenance status, sensor identification, the flow rate, a graph of gas concentration, error codes, and alarm points. All operational settings are completely user adjustable from the front panel. The unit also has a self-diagnosing function which detects sensor trouble and system failure. The Intelligent Gas Detector has a convenient troubleshoot feature through its firmware. This allows users to investigate and resolve their own equipment issues while minimizing maintenance costs.

Specifications

The Intelligent Gas Detector is a convenient size for workplace and wall space efficiency with dimensions of 2.8 D x 4.7 H x 5.9 D and weighs approximately 2 pounds. It can be mounted to a wall easily with a base plate and 2 or 3 screws. Sensor replacements and pump replacements can be performed quick and easily without tools.

*Please note we can only ship RKI products to customers within the United States

GD-70D-CL2 GD-70D Smart Transmitter, Cl2 (chlorine), 0-3.00 ppm by RKI Instruments

RKI Instruments has been making high quality gas detection and monitoring units for over 15 years. With an emphasis on safety and reliability, RKI Instruments excels at providing the best products in gas detection and sensor technology on the market. Every year, RKI strives to improve its product offering and scours the globe for the latest technologies and innovative designs. With the introduction of the GD-70D Series Intelligent Gas Detector, employers and workplace safety managers can feel confident that they have purchased a reliable detector that is built to last.

GD-70D Series Intelligent Gas Detector

The GD-70D Series Intelligent Gas Detector is a new smart gas detection transmitter that monitors combustibles, oxygen, and a wide range of toxic gases. The unit can be used as a standalone device, integrated with other PLC systems, or integrated with RKI's Beacon series of single and multi-channel controllers. Its common platform integrates numerous detection methods and requires very little maintenance.

Exclusive Features

The plug and play intelligent sensors make for easy setup and calibration by internally retaining calibration and sensor data. This allows workers to replace sensors while in the field without the need to reprogram the equipment. For little maintenance and optimal reliability, the internal technology automatically adjusts for long-term zero and span drift. The pump flow is also self-tuning for low maintenance functioning. In general, the smart sensors use electrochemical cell detection, semiconductor detection, pyrolysis-particle detection, galvanic cell detection, and catalytic combustion detection.

The GD-70D Series features a large LCD display that easily reads all notifications and provides a color coded graph for alarm status (first and second alarms are red, and fault alarms are yellow). The LCD screen displays the pyrolyzer connection, gas concentration, detection unit of measurement, the detected gas, the maintenance status, sensor identification, the flow rate, a graph of gas concentration, error codes, and alarm points. All operational settings are completely user adjustable from the front panel. The unit also has a self-diagnosing function which detects sensor trouble and system failure. The Intelligent Gas Detector has a convenient troubleshoot feature through its firmware. This allows users to investigate and resolve their own equipment issues while minimizing maintenance costs.

Specifications

The Intelligent Gas Detector is a convenient size for workplace and wall space efficiency with dimensions of 2.8 D x 4.7 H x 5.9 D and weighs approximately 2 pounds. It can be mounted to a wall easily with a base plate and 2 or 3 screws. Sensor replacements and pump replacements can be performed quick and easily without tools.

*Please note we can only ship RKI products to customers within the United States

GD-70D-CL2-01 GD-70D Smart Transmitter, Cl2 (chlorine), 0-1.50 ppm by RKI Instruments

RKI Instruments has been making high quality gas detection and monitoring units for over 15 years. With an emphasis on safety and reliability, RKI Instruments excels at providing the best products in gas detection and sensor technology on the market. Every year, RKI strives to improve its product offering and scours the globe for the latest technologies and innovative designs. With the introduction of the GD-70D Series Intelligent Gas Detector, employers and workplace safety managers can feel confident that they have purchased a reliable detector that is built to last.

GD-70D Series Intelligent Gas Detector

The GD-70D Series Intelligent Gas Detector is a new smart gas detection transmitter that monitors combustibles, oxygen, and a wide range of toxic gases. The unit can be used as a standalone device, integrated with other PLC systems, or integrated with RKI's Beacon series of single and multi-channel controllers. Its common platform integrates numerous detection methods and requires very little maintenance.

Exclusive Features

The plug and play intelligent sensors make for easy setup and calibration by internally retaining calibration and sensor data. This allows workers to replace sensors while in the field without the need to reprogram the equipment. For little maintenance and optimal reliability, the internal technology automatically adjusts for long-term zero and span drift. The pump flow is also self-tuning for low maintenance functioning. In general, the smart sensors use electrochemical cell detection, semiconductor detection, pyrolysis-particle detection, galvanic cell detection, and catalytic combustion detection.

The GD-70D Series features a large LCD display that easily reads all notifications and provides a color coded graph for alarm status (first and second alarms are red, and fault alarms are yellow). The LCD screen displays the pyrolyzer connection, gas concentration, detection unit of measurement, the detected gas, the maintenance status, sensor identification, the flow rate, a graph of gas concentration, error codes, and alarm points. All operational settings are completely user adjustable from the front panel. The unit also has a self-diagnosing function which detects sensor trouble and system failure. The Intelligent Gas Detector has a convenient troubleshoot feature through its firmware. This allows users to investigate and resolve their own equipment issues while minimizing maintenance costs.

Specifications

The Intelligent Gas Detector is a convenient size for workplace and wall space efficiency with dimensions of 2.8 D x 4.7 H x 5.9 D and weighs approximately 2 pounds. It can be mounted to a wall easily with a base plate and 2 or 3 screws. Sensor replacements and pump replacements can be performed quick and easily without tools.

*Please note we can only ship RKI products to customers within the United States

GD-70D-CL2-02 GD-70D Smart Transmitter, Cl2 (chlorine), 0-10.0 ppm by RKI Instruments

RKI Instruments has been making high quality gas detection and monitoring units for over 15 years. With an emphasis on safety and reliability, RKI Instruments excels at providing the best products in gas detection and sensor technology on the market. Every year, RKI strives to improve its product offering and scours the globe for the latest technologies and innovative designs. With the introduction of the GD-70D Series Intelligent Gas Detector, employers and workplace safety managers can feel confident that they have purchased a reliable detector that is built to last.

GD-70D Series Intelligent Gas Detector

The GD-70D Series Intelligent Gas Detector is a new smart gas detection transmitter that monitors combustibles, oxygen, and a wide range of toxic gases. The unit can be used as a standalone device, integrated with other PLC systems, or integrated with RKI's Beacon series of single and multi-channel controllers. Its common platform integrates numerous detection methods and requires very little maintenance.

Exclusive Features

The plug and play intelligent sensors make for easy setup and calibration by internally retaining calibration and sensor data. This allows workers to replace sensors while in the field without the need to reprogram the equipment. For little maintenance and optimal reliability, the internal technology automatically adjusts for long-term zero and span drift. The pump flow is also self-tuning for low maintenance functioning. In general, the smart sensors use electrochemical cell detection, semiconductor detection, pyrolysis-particle detection, galvanic cell detection, and catalytic combustion detection.

The GD-70D Series features a large LCD display that easily reads all notifications and provides a color coded graph for alarm status (first and second alarms are red, and fault alarms are yellow). The LCD screen displays the pyrolyzer connection, gas concentration, detection unit of measurement, the detected gas, the maintenance status, sensor identification, the flow rate, a graph of gas concentration, error codes, and alarm points. All operational settings are completely user adjustable from the front panel. The unit also has a self-diagnosing function which detects sensor trouble and system failure. The Intelligent Gas Detector has a convenient troubleshoot feature through its firmware. This allows users to investigate and resolve their own equipment issues while minimizing maintenance costs.

Specifications

The Intelligent Gas Detector is a convenient size for workplace and wall space efficiency with dimensions of 2.8 D x 4.7 H x 5.9 D and weighs approximately 2 pounds. It can be mounted to a wall easily with a base plate and 2 or 3 screws. Sensor replacements and pump replacements can be performed quick and easily without tools.

*Please note we can only ship RKI products to customers within the United States

GD-70D-CLF3-A GD-70D Smart Transmitter, ClF3, (chlorine trifluoride), 0-0.60 ppm, with A Type Sensor by RKI Instruments

RKI Instruments has been making high quality gas detection and monitoring units for over 15 years. With an emphasis on safety and reliability, RKI Instruments excels at providing the best products in gas detection and sensor technology on the market. Every year, RKI strives to improve its product offering and scours the globe for the latest technologies and innovative designs. With the introduction of the GD-70D Series Intelligent Gas Detector, employers and workplace safety managers can feel confident that they have purchased a reliable detector that is built to last.

GD-70D Series Intelligent Gas Detector

The GD-70D Series Intelligent Gas Detector is a new smart gas detection transmitter that monitors combustibles, oxygen, and a wide range of toxic gases. The unit can be used as a standalone device, integrated with other PLC systems, or integrated with RKI's Beacon series of single and multi-channel controllers. Its common platform integrates numerous detection methods and requires very little maintenance.

Exclusive Features

The plug and play intelligent sensors make for easy setup and calibration by internally retaining calibration and sensor data. This allows workers to replace sensors while in the field without the need to reprogram the equipment. For little maintenance and optimal reliability, the internal technology automatically adjusts for long-term zero and span drift. The pump flow is also self-tuning for low maintenance functioning. In general, the smart sensors use electrochemical cell detection, semiconductor detection, pyrolysis-particle detection, galvanic cell detection, and catalytic combustion detection.

The GD-70D Series features a large LCD display that easily reads all notifications and provides a color coded graph for alarm status (first and second alarms are red, and fault alarms are yellow). The LCD screen displays the pyrolyzer connection, gas concentration, detection unit of measurement, the detected gas, the maintenance status, sensor identification, the flow rate, a graph of gas concentration, error codes, and alarm points. All operational settings are completely user adjustable from the front panel. The unit also has a self-diagnosing function which detects sensor trouble and system failure. The Intelligent Gas Detector has a convenient troubleshoot feature through its firmware. This allows users to investigate and resolve their own equipment issues while minimizing maintenance costs.

Specifications

The Intelligent Gas Detector is a convenient size for workplace and wall space efficiency with dimensions of 2.8 D x 4.7 H x 5.9 D and weighs approximately 2 pounds. It can be mounted to a wall easily with a base plate and 2 or 3 screws. Sensor replacements and pump replacements can be performed quick and easily without tools.

*Please note we can only ship RKI products to customers within the United States