$1000 - $2000

C011030 Xgard Hazardous Area ESU EX, for Three Detectors by Crowcon

The Environmental Sampling Unit provides a cost-effective solution for monitoring high-density gases such as chlorine, sulphur dioxide and flammable vapours, in environments where the positioning of conventional sensors is not practical.

The sampling chamber is fitted with an electric fan, which draws an air sample via a pipe. Xgard gas detectors are fitted to the chamber to monitor for the presence of flammable or toxic gases.

Features:

• Can monitor up to 12 metres of perforated pipe using a fan-aspirated single sensor.
• Flameproof fan available for flammable gas applications.
• Fan-fail monitoring is available for up to four units using a Gasmaster control panel.
• Typical applications include gas detection in LPG and chlorine stores, flammable gas detection in wet wells.

TXISP-HF-SIDE-Sira-10 TXgard-IS+ Toxic Gas Detector with Display, Hydrogen Fluoride 0-10 ppm by Crowcon

TXgard-IS+ is a Intrinsically Safe (I.S.) toxic and oxygen gas detector with local LCD display. A wide choice of sensors are available for use in a variety of applications.

Features:

Non-intrusive calibration

• Calibration can be performed locally without the need for hot work permits
• Local display and buttons enable calibration without opening the junction box

Flexible output options

• A two-wire 4-20mA signal is provided
• The output can be forced up without applying gas to enable simple checking of control systems and alarms.

Rugged and reliable

• Constructed using highly durable GRP to provide good impact resistance
• Ingress protection to IP65 as standard, IP66 with accessory
• IEC61508 SIL compliant

WD-35408-00 CON 600 Portable Waterproof Conductivity Meter with Probe by Oakton

Conductivity, TDS, resistivity, salinity measure from pure water to seawater!

• Durable waterproof and dustproof design with IP67 rating Even with no probes attached
• Single or multipoint calibration; auto or manual Fast, trouble-free calibration for more accurate measurements
• Large backlit graphic display Multi-line display with electrode status indicator, calibration data, and more
• User-settable calibration due alarm Out-of-date or unperformed calibrations are now things of the past!
• Built-in real-time clock Time-and-date stamping meets Good Laboratory Practice (GLP) standards
• Advanced data management Store up to 500 data sets and download via Infrared IrDA wireless interface
• Set point alarms Audible warning when readings are outside set points limit
• Accept 2-cell and 4-cell conductivity probes Measure over a broad conductivity range up to 500 mS/cm
• Password protection Security for calibration and setup menus
• Rugged rubber boot Protects meter from bumps and dings (optional; included with kits)

CPD-W7X1S3M1-Y-00 BW Flex Multi-Gas Detector, %LEL(UF), Oxygen (O2), Sulfur Dioxide (SO2), Carbon Monoxide (CO), Yellow by BW Technologies

Whether you're protecting workers or first responders — in industries from steel and wastewater to paper and pulp — Honeywell BW™ Flex delivers the flexibility you need. Choose from more than 15 sensors to simultaneously detect up to 4 gas hazards.

REAL-TIME GAS READINGS AT A GLANCE

Honeywell BW™ Flex features a large high-resolution display with readings available in a wide range of languages. Vital safety information is conveyed clearly and effectively, enabling faster decision-making to protect lives in hazardous environments. Its innovative design, compact size and ease of use builds on the legacy of Honeywell BW™ gas detection products.

INTELLIGENT SENSORS FOR INCREASED SAFETY & UPTIME

Honeywell BW™ Flex incorporates i-Series intelligent sensors which monitor sensor status and provide advanced predictive calibration, maintenance and end-of-life information in real-time. These advanced alerts help reduce the likelihood of failure and increase awareness so preventive action can be taken to avoid safety incidents and unexpected downtime.

SIMPLIFIED GAS REPORTING AND ANALYSIS

Honeywell BW™ Flex can be paired with a smartphone easily via Bluetooth®. Download the Honeywell Safety Suite Device Configurator app for quick and precise device management, maintenance, reporting and analysis. Increase productivity by simplifying tasks like recording incidents and save time with one-click download for all instrument data.

FEATURES AND BENEFITS

• RELIABLE: Two months of battery runtime on a 4.5-hour charge with our new lowpowered IR LEL sensor. No daily charging, no unexpected downtime.
• COMPATIBLE: The Honeywell BW™ Flex Series is compatible with the IntelliDoX instrument management system and Honeywell Safety Suite using Bluetooth® for wireless configuration.
• ACCURATE: Low-power infrared LEL sensor is immune to silicone poisoning, which means accurate monitoring of combustibles.
• EASY TO MANAGE: The IntelliFlash™ green light indicates when the detector is in compliance and the amber light indicates the need for maintenance.
• RESPONSIVE: 1series sensors respond to dangerous gas levels in seconds, even in harsh temperatures.
• EASY TO USE: Small, lightweight and wearable. One-button operation.

Part Number: CPD-W7X1S3M1-Y-00

2214017 CS 21 Fixed Gas Transmitter, HCFC-22 (CHClF2), 50 to 5000 ppm by GfG

The CS 21 transmitter uses the proven chemosorption detection principle for detection of toxic gases, vapors and combustibles. The rapid response of the transmitter provides opportunity to take counter measures and thereby limit damages. The long life of the sensors makes the CS 21 a low-cost solution for your detection needs. A transmitter can be continuously operated for more than 5 years.

Wall mount installation is straightforward. The distance between transmitter and controller can be greater than 500 m. A rugged aluminum casing protects the sensor and electronics from splashes of water and dirt. The transmitter must not be operated in EX-areas. For measurement of combustible gases in the LEL range the gas needs to be sampled by pump. In this case the EX-protection needs to be guaranteed with suitable external components (e.g.flame-protection).

• High sensitivity to a broad range of refrigerants
• Long sensor life
• Fast response

5201-2302 GDC-150 Gas Sensor Transmitter, NEMA 4 Housing, H2S Sensor, w/Display & Relay by Bacharach

The all new GDC-150 transmitter from Bacharach offers detection and protection for a wide range of hazards including toxic gases such as carbon monoxide (CO), oxygen depletion, combustible gases, refrigerant leaks and total volatile organic compounds (TVOCs). Analog interfaces allow the transmitter to be connected back to Bacharach's GDA Series of controllers (or any other gas detection controller), building management systems or control systems. The GDC-150 features 4-20 mA or 0-10 VDC linear output signals, an automatic thermal resetting fuse, RoHS compliant circuit boards and LED indicators for power and open loop.

The onboard alarm LED's indicate when alarm threshold values are exceeded. The unit can be ordered with an optional alpha numeric LED display that shows gas concentrations in real time while alarm relays alert personnel of potential dangers, avoiding incidents and potential hazards.

The GDC-150 is packaged in a rugged, polycarbonate housing for both indoor and outdoor applications. When leaks occur, the GDC-150 sensors respond quickly and accurately to protect people and property. Automated calibration and simple maintenance procedures performed in the field allow for continuous operation and assurance that areas are monitored and protected at all times.

61-5008RK RX-515 Detector Assembly, IR, CH4/CO2, Model DE-3123-2 by RKI Instruments

The Crude Oil Tanker model is a combination type portable HC, O2, and H2s gas detector with an Infrared (NDIR) type sensor, galvanic cell type sensor and Electro-chemical cell type sensor. These sensors provide accurate detection of HC, O2 and H2S levels even in N2 and other inert environments. The measuring ranges of model RX-516 are 0-100%LEL / 0-10%vol for HC, 0-25% vol for O2 and 0-100.0ppm for H2S respectively. A higher range for H2S (0-1,000ppm) is available in model RX-517. A manual switch is used to change the flow to a unique path for high H2S applications to protect the other sensors. The RX-516 / RX-517 has an explosion proof and Intrinsically Safe design so that it can be used safely in any envrionment.

Features

• Dual range detection of CH4 or HC in %vol and %LEL.
• Unique gas combinations include: CH4/O2/CO/CO2/HC/O2/H2S
• Accurately measure CH4 or HC from inerted tanks with infrared sensor.
• High range H2S 0-1,000ppm available (RX-517).
• Intrinsically safe design.
• Datalogging (Max 30 hours of interval trend).

Application

• Crude oil tanker storage tank gas monitoring

*Please note we can only ship RKI products to customers within the United States

SD-1GH-R1114-5 Detector head, 4-20 mA transmitter, SD-1GH, 0-500 ppm R1114(tetrafluoroethylene), SG-8521, AL100ppm by RKI Instruments

RKI Instrument's model SD-1 Series smart combustible gas, toxic gas, oxygen, and organic vapor detector/transmitter is a robust and reliable explosion proof design for detecting LEL and ppm levels of hazardous atmospheres. In addition to measuring the common %LEL levels of methane, hexane and isobutane, for example, the SD-1 Series also has the capability of measuring a wide variety of toxic organic compounds in a PPM range such as acrylonitrile, ethylene oxide, n-methyl pyrolidone, methylene chloride and many others. This gives the SD-1 Series a unique niche in RKI's gas detector line-up. The SD-1 has an ATEX/IECEX approval for the explosion class ExdIICT5 and has an IP-65/67 ingress protection rating.

The SD-1 has a 4-20mA signal output as well as relay contacts for interfacing with other control systems or monitoring facilities. All SD-1 types are also available with HART communication instead of 4-20mA relay. SIL2 is available for the IR, EC and OX types. In facilitating non-intrusive conditions in hazardous atmospheres, the SD-1 can be calibrated and it's menus navigated with magnetic switches and a magnetic key.

Features

• Wide range of detectable gases: % LEL Combustibles, catalytic; % LEL Combustibles, IR; H2S, CO, & O₂; PPM for acrylonitrile, hydrogen, ethylene oxide, n-methyl pyrolidone, methylene chloride, and many others
• Sensor types include: Catalytic, Galvanic Cell, MOS, IR, & Electrochemical
• Direct digital display of gas readings
• HART Communication protocol or 4-20 linear output
• Available with SIL2 approval (IR, EC, OX versions)
• Easy maintenance using a magnetic key
• Self-diagnosis by microprocessor
• Low power operation (Maximum: 3W)
• Explosion proof: ATEX, IECEx, ExdIICT5

Applications

• LNG Terminal
• Petrochemical/Chemical plants
• Power plant
• Utilities
• Iron and steel works

*Please note we can only ship RKI products to customers within the United States

72-PAD-F GX-3R Pro 5 Gas Personal Monitor, LEL/Oxy/H2S/CO/NO2, with Li-Ion battery/100-240 VAC & 12 VDC chargers by RKI Instruments

The GX-3R Pro is the world's smallest 5-gas monitor weighing only 4.58 ounces and fits in the palm of your hand (2.9" W x 2.6" H x 1.06" D). It simultaneously monitors and displays 5 different gases. In addition to monitoring standard confined space gases, LEL, O₂, CO, & H₂S, the GX-3R Pro has a 5th channel where you can add infrared or toxic sensors. Two of the four sensor slots have interchangeable sensors providing flexible configurations, which can easily be changed in the field.

The GX-3R Pro comes equipped with Bluetooth wireless communication, man-down alarm, the choice of alkaline or rechargeable power supply, and a 3 year warranty. The Lithium-ion battery pack will operate for 25 hours and will fully charge in 3 hours.

The GX-3R Pro utilizes Bluetooth communication to display direct gas readings from the instrument to a phone app, which is available free on either iOS or Android phones. Automatic notifications can be programmed to send text or email messages, if there is an alarm event from the GX-3R Pro.

Safety supervisors will appreciate the non-compliance indicator. The instrument flashes it's 3 LED lights every 30 seconds in the following conditions; if the instrument has not been bump tested, or if calibration is due, or if there was a gas alarm event. The 3 LED lights will continue to flash once every 30 seconds until the non-compliance condition has been resolved. The 30 second interval is adjustable.

Features

• Smallest & lightest 5 gas monitor: 2.9" W x 2.6" H x 1.06" D , 4.58 ounces
• Simultaneous detection of 5 gases: LEL, O₂, H₂S, CO, and other optional sensors; H₂ Compensated CO sensor available
• Simple 2-button operation
• Bluetooth communication with iOS & Android App
• Non-Compliance Indicator
• 3 user adjustable alarm levels
• Panic Alarm - Tap instrument twice
• Man Down Alarm
• Impact resistant body
• Large full dot, auto-backlit display with auto-rotation
• Stealth mode for law enforcement
• Field replaceable sensors & filters
• Water and dust resistant design, IP66/68
• 3 Year warranty

Applications

• Personal monitoring
• Confined spaces
• Refineries/petrochemical
• Utilities
• Oil and Gas
• Water/wastewater
• Fire services
• Construction

*Please note we can only ship RKI products to customers within the United States

Sperian Biosystems PhD6 Multigas Detector

The Biosystems PhD6 Multigas Detector is the latest development in compact multigas detection systems. The detector is proven to be compact, efficient, and cost effective. With dual alarm systems featuring ultra-loud audible indicators and ultra-bright LED visual indicators, users and those nearby are always notified when potential hazards may be present. When developing this detector, the engineers at SperianProtection Instrumentation also developed an express docking station that would reduce calibration time and labor costs. The detection and docking station help users meet record keeping requirements and reduce the risks of human error. With the SperianBiosystems PhD6 Multigas Detector, users can rest assured that they are receiving the very best in gas detection technology.

Key Features

The Biosystems PhD6 Multigas Detector is compatible with over 19 sensor choices including:

• PID
• IR-CO2
• IR-CH4
• Conventional LEL
• Oxygen
• 15 different toxic gas sensors

The gas detector is encased in a durable solid polycarbonate case with a rubber over mold for easy handling. It has an interchangeable battery pack with both Alkaline and Li-Ion rechargeable batteries. Both battery types offer up to 24 hour run times. The unit features dual audible alarms at 92 decibels and front and side ultra-bright LED visual alarms to ensure that the user and those nearby are always notified of possible hazardous conditions. For easy interpretation, the detector has an easy to read status bar and large LCD display that notifies users of the device s functionality and calibration due date. Using the menu options, users can easily adjust a variety of the instrument s settings.

Automatic Docking Station

When developing the PhD6 Multigas Detector, product developers also created an automatic docking station (Biosystems IQ6 Express Dock) to be fully compatible with the detector. The docking station aims to reduce labor time and costs by fully automating certain aspects of instrument maintenance including calibration, functionality testing, and record keeping. Using the Express Dock, users can maintain compliance with recordkeeping requirements by simply docking the detector in the station. The station will automatically perform a variety of operations without user intervention.

Sperian Protection Instrumentation and Honeywell

Sperian Protection Instrumentation is a global leader in personal safety equipment. The company was recently acquired by Honeywell, another global leader in technology and innovation. As a Fortune 100 company, Honeywell has a vested interest in maintaining its reputation as a developer of efficient and reliable safety equipment. Sperian Protection Instrumentation helps to expand Honeywell s personal safety offerings while advancing their position in the American market. By purchasing a product by Sperian and Honeywell, customers can be assured they are receiving the very best in safety technology and equipment.

GD-K71D-B2H6 GD-K71D Smart Transmitter, Diborane (B2H6), 0 - 0.3 ppm by RKI Instruments

The GD-K71D is a complete sample drawing gas monitor, including digital readout and alarm relays. A new gas sensor technology using an intelligent sensor for remote location calibration and setup is used. The new GD-K71D sensors are designed to provide a longer time period between calibrations. Calibration intervals have been extended to12 months of on-line service which equates to reduced maintenance cost. In addition, the sensors can be calibrated away from the gas detector installation, for example in a service area or off site. This eliminates the inconvenience of having calibration gases in the fab or monitoring location. GD-K71D easily connects to an existing PLC system and is ideal for applications needing a local readout or where a relay control is needed. The automatic zero correction software provides excellent long term stability and minimizes false alarms due to zero drift.

Features:

• LED digital display
• Sensor information and calibration is stored within sensor memory
• Several data transmission options available
• Zero suppression and correction
• Housing design for narrow wall mounting locations
• Self-diagnostic functions by microprocessor
• Electrochemical sensors for most semiconductor gases
• Built-in sampling pump
• Easy replacement of pump and sensor
• Two alarm levels with relays, plus trouble alarm
• 24VDC operation
• Optional NEMA 4X housing available

Applications:

• Semiconductor
• Chemical Processing
• Laboratory
• Manufacturing
• HVAC

*Please note we can only ship RKI products to customers within the United States

35-3000RK-IR-13 IR Carbon Dioxide, 0 - 5% Vol, Sample Draw Assembly in NEMA 4X Enclosure by RKI Instruments

The 35-3000RK series is a compact sample draw detector assembly with a built-in pump that accepts a 24VDC input. This unit features a NEMA 4X enclosure making it dust, water and corrosion resistant. It also features a flowmeter with adjustable flow and a low flow alarm which warns of any obstructions or restrictions in the flow system. Combustibles, oxygen, hydrogen sulfide and carbon monoxide versions are available with or without a 4-20 mA transmitter. The 35-3000RK is also available with both LEL and oxygen sensors in one unit.

The 35-3000RK is capable of single person calibrations and remote sampling at up to 5,000 ft. from a controller, and interfacing to any RKI or third party control system (utilizing a 4-20 mA feedback signal). Multigas versions of this efficient sample draw system are available with up to four sensors, LEL, O2, H2S and CO all in one enclosure. This is a very cost effective way of monitoring for several gases that may be in the same place.

Features

• NEMA 4X enclosure
• Long life pump
• Flowmeter and LED's for operational status
• Low flow indication
• Operates on 24VDC input
• Multigas versions available with up to 4 sensor in one enclosure
• Available in LEL, O2, H2S, CO, H2, HC (ppm)
• LEL and O2 available with or without transmittter
• LEL and O2 available together in one standard compact enclosure

Industry Applications

• Petrochemical plants
• Refineries
• Water & wastewater treatment plants
• Pulp & paper mills
• Gas, telephone, & electric utilities
• Parking garages
• Manufacturing facilities
• Steel
• Automotive
• HVAC

*Please note we can only ship RKI products to customers within the United States

Biosystems ToxiPro Docking Station by Sperian

The BiosystemsToxiPro Docking Station by Sperian utilizes state of the art technology to enhance user experiences with the ToxiPro Single Gas Monitor. As a component to your gas detection system, the docking station automatically improves the system s infrastructure and offers numerous automatic operations that help to ensure safety and improve compliance with record keeping requirements. With its automatic functions, the ToxiPro Docking Station can help to reduce labor costs associated with equipment maintenance. Simply load the equipment into the docking station and watch it work!

Key Features

To complement the features of the ToxiPro Single Gas Monitor, the ToxiPro Docking Station offers numerous features that help improve the efficiency and operability of equipment:

• Bump test response time in less than 30 seconds
• Calibration test in approximately 1 minute
• Software features for record keeping, maintenance, and identifying worksite trends
• Full instrument check-ups for functionality and integrity
• Automatic calibration upon docking
• USB or Ethernet capabilities
• User Enhancement Software
• Minimal user maintenance

Automatic Features

The ToxiPro Docking Station automatically performs a variety of tasks once the gas detector is docked on the station. First, the unit tests the operability of the gas detector by testing more than a dozen performance functions. If the test results are not within the predefined performance specifications, the unit will indicate that the equipment failed the test. The docking station also automatically downloads all relevant data upon docking. Finally, the docking station automatically checks and calibrates the single gas detector with every docking. It only takes approximately 2 minutes for full calibration.

ToxiPro Single Gas Detectors

The ToxiPro Single Gas Detector is a compact handheld single sensor gas detector is a simple system with incredible reliability. Also designed by Sperian, the single sensor is available for a variety of gases and operates under harsh conditions. In addition to the name of the gas, each detector has a color coded label to indicate the gas type.

Sperian Protection Instrumentation and Honeywell

For over 50 years, Sperian Protection Instrumentation has worked to research and develop the world s most reliable personal safety instruments. The company has a well-deserved reputation for excellence. For that reason, Honeywell recently acquired the company. By acquiring Sperian, Honeywell expanded its offerings in the market and improved its portfolio of personal safety equipment. As global leaders in innovation and technology, Honeywell will continue to honor their traditions of excellence by continuing to produce the world s most reliable and efficient safety equipment.

WD-35630-32 pH/CON 450 Portable Waterproof pH/CON Meter by Oakton

The pH/CON 450 meter offers a rugged, waterproof housing, making it ideal for the manufacturing floor, field testing, and the laboratory. Large, backlit LCD lets you view the main measurement simultaneously with temperature. Calibrate pH with up to six points from USA, NIST, DIN, PWB, and custom pH buffer sets. Autocal feature for conductivity has one calibration point per range. ATC ensures measurement accuracy even in fluctuating temperatures.

Meter features include ready (stability) indicator, smart averaging, user-selectable C/F units, hold function, calibration alarm, battery life-indicator, and electrode status.

Perform data logging with manual or timed collection of up to 500 data sets with real-time clock time/date stamp. Order optional data cable for USB and RS-232 connectivity. Choose combination pH/CON probe or separate probe options.

• Intuitive, user-friendly icons-electrode status displays pH slope
• Grip-Clip electrode holder quickly and easily secures electrode to side of beaker or container
• USB or RS-232 output for up to 500 data sets
• Extended battery life or optional universal power adapter
• Built-in stand with wall mount allows for easy benchtop measurement or storage

WD-35408-81 CON 610 Portable Waterproof Conductivity Meter with Kit, with NIST Traceable Certificate of Calibration by Oakton

Conductivity, TDS, resistivity, salinity measure from pure water to seawater!

• Includes conductivity probe, conductivity standards (60mL each of 1413 µS, 12.88mS, 3000 ppm, and rinse water), rubber boot, electrode holder, batteries, and hard carrying case
• Durable waterproof and dustproof design with IP67 rating Even with no probes attached
• Single or multipoint calibration; auto or manual Fast, trouble-free calibration for more accurate measurements
• Large backlit graphic display Multi-line display with electrode status indicator, calibration data, and more
• User-settable calibration due alarm Out-of-date or unperformed calibrations are now things of the past!
• Built-in real-time clock Time-and-date stamping meets Good Laboratory Practice (GLP) standards
• Advanced data management Store up to 500 data sets and download via Infrared IrDA wireless interface
• Set point alarms Audible warning when readings are outside set points limit
• Accept 2-cell and 4-cell conductivity probes Measure over a broad conductivity range up to 500 mS/cm
• Password protection Security for calibration and setup menus
• Rugged rubber boot Protects meter from bumps and dings (optional; included with kits)

WD-35632-32 pH/DO 450 Portable Waterproof pH/DO Meter by Oakton

The pH/RDO 450 meter uses optical measurement technology offering fast response times and long-term stability with minimal maintenance. Plus the automatic temperature compensation (ATC), barometric pressure compensation, and salinity correction further ensure measurement accuracy. The large, backlit LCD lets you view pH, ISE, mV, % saturation, or mg/L (ppm) simultaneously with temperature.

Rugged, IP67-rated waterproof housing makes the meter ideal for plant or field testing. Additional features include ready (stability) indicator, smart averaging, hold function, calibration alarm, and battery-life indicator.

Perform data logging with manual or timed collection of up to 500 data sets with real-time clock time/date stamp. Order optional data cable for USB and RS-232 connectivity.

• Durable waterproof and dustproof design with IP67 rating
• Eliminates costly, tiresome membranes and solutions
• Barometric pressure and salinity correction
• USB and RS-232 output for up to 500 data sets
• Built-in stand allows for easy benchtop use
• 500 hours battery life, or optional universal power adapter

WD-35408-10 CON 610 Portable Waterproof Conductivity Meter with Probe by Oakton

Conductivity, TDS, resistivity, salinity measure from pure water to seawater!

• Includes conductivity probe and batteries
• Durable waterproof and dustproof design with IP67 rating Even with no probes attached
• Single or multipoint calibration; auto or manual Fast, trouble-free calibration for more accurate measurements
• Large backlit graphic display Multi-line display with electrode status indicator, calibration data, and more
• User-settable calibration due alarm Out-of-date or unperformed calibrations are now things of the past!
• Built-in real-time clock Time-and-date stamping meets Good Laboratory Practice (GLP) standards
• Advanced data management Store up to 500 data sets and download via Infrared IrDA wireless interface
• Set point alarms Audible warning when readings are outside set points limit
• Accept 2-cell and 4-cell conductivity probes Measure over a broad conductivity range up to 500 mS/cm
• Password protection Security for calibration and setup menus
• Rugged rubber boot Protects meter from bumps and dings (optional; included with kits)

XT-XW0M-Y-AU GasAlertMax XT II 3 Gas Detector, Combustible (% LEL), Oxygen (O2), Carbon Monoxide (CO) - Yellow Housing, AU Version (Australia) by BW Technologies

GasAlertMax XT II is the safest and most economical choice for multi-gas detection systems. Utilizing the most advanced technology on the market, the GasAlertMax accurately and reliably monitors up to four hazardous conditions, and offers a simple user friendly device for easy operation. Its standard safety features and compatibility with other instruments ensure that the gas detector is the best instrument for gas monitoring compliance.

GasAlertMax XT II specifications

The lightweight and portable unit is approximately 11.5 ounces, and features the latest technology allowing for a compact design. With an operational temperature range of -4 to 122 degrees Fahrenheit, the monitor is designed to function effectively in many harsh conditions. The cautionary yellow outer shell helps to ensure that the gas detector is carried with the user not left onsite. Additionally, the durable casing is resistant to water and features a built-in concussion proof boot.

Triple alarm system

The GasAlertMax XT II features a triple alarm system designed to alert users of potentially hazardous conditions. When the gas sensors detect specified levels of H2S, CO, O2, or combustible gases, the instrument will begin the triple alarm alert and notify users and those nearby. The device indicates these dangers with a vibrating alarm, an ultra bright visual alarm, and an audible alarm of over 95 decibels. The alarms are also designed to alert users of administrative needs such as battery replacement.

GasAlertMax XT II features

The GasAlertMax XT II has multi-language support features in English, French, Spanish, German, and Portuguese. The gas detector also has state of the art block detection with semi-conductor pressure sensor, and standard data and event logging. Accessories such as the belt holster, multi-unit cradle charger, and concussion proof boot are also available.

Upon activation, the unit will automatically test sensors, pumps, battery, and circuitry. For additional test and calibration, the GasAlertMax XT II is compatible with the MicroDock II automated test and calibration system and Fleet Manager II. Improving on its functionality, the unit is customizable. Users can change options for forced calibration and tests, safety locks, alarm setpoints, safe display mode, language choices, start-up message, and more.

The easy to read LCD screen displays continuous information about real-time gas concentrations and alarms. To maintain simplicity and ease of use, the GasAlertMax XT II also features a user and glove friendly one touch button for operation. The no-frills design has an added benefit of minimizing cost and user training. This simple, portable, and compact detector is the best instrument for confined spaces or potentially dangerous worksites.

Highest standards of reliability

The typical batter life ranges between 8 and 13 hours depending on the temperature. The durable and long lasting batteries can fully recharge in approximately 6 hours. The GasAlertMax XT II and its sensors feature a standard two year warranty. With safety and reliability as a top priority, BW Technologies has developed the multigas detector to utilize the most advanced technology on the market, while maintaining its simplicity and portability. When working in settings with possible gas exposure, users can be certain that the gas levels are being accurately and reliably monitored with the best technology available.

Part Number: XTXW0MYAU

Gasmaster Control Panel for Gas and Fire Monitoring

Crowcon Detection Instruments is a global leader in gas detection and safety equipment. With over 40 years of experience in research and technology, Crowcon is consistently leading the industry in design innovation. By integrating historical successes with advances in modern technology, Crowcon is able to consistently produce high quality products that meet today s challenging environments.

The Gasmaster is an innovative self-contained control panel that monitors gas and fire hazards. Its exclusive features allow the control panel to be flexible enough to fit most industrial applications. More importantly, its outstanding performance and leading technology make this panel an industry leader.

Exclusive Gasmaster Features

Crowcon sGasmaster contains numerous features that outperform the competition in gas detection and safety standards:

• Easy to use control features
• Easy to read backlit LCD display
• Unparalleled flexibility and compatibility with existing equipment
• Reliable alarm and safety features

Easy to Use

The Gasmaster is incredibly easy to read and operate. The front mounted display simultaneously broadcasts all of the appropriate gas levels while indicating the system status check. The front panel also houses the buttons that control the systems operations. All features of the Gasmaster, including recalibration, can be controlled by these easy to operate keys. With the simple push of a button, any user can easily operate the system s features. The Gasmaster s system s software was also designed with ease of use in mind. The software enables reconfiguration and datalogging instantaneously and requires minimal training.

The backlit LCD display screen provides all of the necessary safety information without overwhelming the user. Utilizing a large clear screen, the alphanumeric display reads the gas levels, displays the system status, and illuminates an alarm bar when necessary.

Flexible and Adaptable

The state of the art Gasmaster is incredibly versatile and flexible. The unit can monitor and control virtually any combination of gas and fire detectors. The unit also offers a variety of outputs for maximum flexibility and compatibility with exterior equipment. The system is incredibly configurable allowing for customization based on specific and individual needs. From detection set points to remote facilities and silent alarms, Crowcon Detection Instruments produced a control panel that is can be suited to fit any needs.

Specifications

The Gasmaster is approximately 288 x 278 x 110 millimeters in size and weighs approximately 4.5 kilograms. The unit is housed in cast aluminum (back box) and fire-retardant ABS plastic (front cover). The control panel features a VAC power source and contains internal batteries. For event logging, the Gasmaster has the capacity to hold up to 300 hours of time stamped alarm, fault, or system intervention activities. The event logging capabilities are available with purchase of the optional communications kit and communications port.

Sperian Biosystems PhD6 Multigas Detector

The Biosystems PhD6 Multigas Detector is the latest development in compact multigas detection systems. The detector is proven to be compact, efficient, and cost effective. With dual alarm systems featuring ultra-loud audible indicators and ultra-bright LED visual indicators, users and those nearby are always notified when potential hazards may be present. When developing this detector, the engineers at SperianProtection Instrumentation also developed an express docking station that would reduce calibration time and labor costs. The detection and docking station help users meet record keeping requirements and reduce the risks of human error. With the SperianBiosystems PhD6 Multigas Detector, users can rest assured that they are receiving the very best in gas detection technology.

Key Features

The Biosystems PhD6 Multigas Detector is compatible with over 19 sensor choices including:

• PID
• IR-CO2
• IR-CH4
• Conventional LEL
• Oxygen
• 15 different toxic gas sensors

The gas detector is encased in a durable solid polycarbonate case with a rubber over mold for easy handling. It has an interchangeable battery pack with both Alkaline and Li-Ion rechargeable batteries. Both battery types offer up to 24 hour run times. The unit features dual audible alarms at 92 decibels and front and side ultra-bright LED visual alarms to ensure that the user and those nearby are always notified of possible hazardous conditions. For easy interpretation, the detector has an easy to read status bar and large LCD display that notifies users of the device s functionality and calibration due date. Using the menu options, users can easily adjust a variety of the instrument s settings.

Automatic Docking Station

When developing the PhD6 Multigas Detector, product developers also created an automatic docking station (Biosystems IQ6 Express Dock) to be fully compatible with the detector. The docking station aims to reduce labor time and costs by fully automating certain aspects of instrument maintenance including calibration, functionality testing, and record keeping. Using the Express Dock, users can maintain compliance with recordkeeping requirements by simply docking the detector in the station. The station will automatically perform a variety of operations without user intervention.

Sperian Protection Instrumentation and Honeywell

Sperian Protection Instrumentation is a global leader in personal safety equipment. The company was recently acquired by Honeywell, another global leader in technology and innovation. As a Fortune 100 company, Honeywell has a vested interest in maintaining its reputation as a developer of efficient and reliable safety equipment. Sperian Protection Instrumentation helps to expand Honeywell s personal safety offerings while advancing their position in the American market. By purchasing a product by Sperian and Honeywell, customers can be assured they are receiving the very best in safety technology and equipment.

2813-708-001 EC 28i Intrinsically Safe Transmitter with Carbon Monoxide (CO-H) Reduced H₂ Sensitivity Sensor, 1 ppm Resolution, 0 - 500 ppm Range, No Display by GfG

Wherever hazards are expected, the EC 28 transmitter and GfG's proven monitoring systems are the right choice for reliable surveillance. The ATEX-certified Ex-proof design, and bright alarm LEDs provide the highest safety in hazardous areas. The gas alarm not only alerts the person in the control room of hazards, but also the person on-site.

Smart sensor technology allows a user to install the transmitter or to replace a sensor within a few seconds - just plug the sensor into the transmitter. Adjustments are done directly at the transmitter using touch keys or with the RC2 remote control (one-person calibration).

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

• Increased safety design to reduce installation cost in potentially hazardous locations
• Non-intrusive AutoCal® calbiration adjustment
• Uses electrochemical detection principle
• Output signal: 4-20 mA
• Intrinsically safe (i) EX-Proof
• Available in two configurations: Blind (no display); Display
• Barriers are required
• EX- conduit is not required