$100 - $150

*Please note we can only ship RKI products to customers within the United States

343C3 Dual Input K-Type Thermocouple Thermometer with Two GK13M Probes and Two CK21M Probes by Test Products International

TPI contact temperature testers are accurate, reliable, and built to last. Models 341K, 343 and 367D can be auto field calibrated to system accuracy (tester plus probe) of ± 1°F in less than 10 seconds in ice water.

Auto Field Calibration Perform ice bath calibration to achieve ±1°F system accuracy within the 30°F to 120°F temperature range. Calibration is an easy two-step process performed with instrument keypad, no additional tools needed.

Features:

• Auto Field Calibrate in less than 10 seconds in ice water to achieve ± 1°F system (tester & probe) accuracy within 30°F to 120°F temperature range
• Temp1, Temp2, Temp1-Temp2 display modes
• Min / Max Record
• Auto Resolution (0.1° / 1°)
• °C/°F Selectable
• Hold feature freezes reading on display
• Auto Off
• Protective rubber boot
• Easy to read LCD display

Includes:

• Two GK13M temperature probe
• A908 Case
• Two CK21M pipe clamp probes

H-10-116-10 Phosphine Colorimetric Gas Detection Tube, 5 - 50 ppmv (10 Tubes / Box) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

RGDME5MP1T BEAGLE Plus Natural Gas/Methane Gas Detector; with plug cable; Power supply: 110V~ by Seitron Americas

Based on the gas you need to detect, you can choose among methan, LPG or CO version of the Beagle PLus.

Invisible enemies

A gas leak detector protects you from invisible enemies, which presence we can only detect when it is too late, or even never, such as in case of a carbon monoxide leak.

Every year around the world there are numerous accidents and fatalities due to gas leaks. Beagle Plus improves your house safety, and alert you in case of danger.

Quality and reliability

All Seitron gas leak detectors are made in Italy and undergo strict quality tests to ensure the highest quality level. Beagle and Segugio detectors are both IMQ certificated, and are compliant to international standards.

WD-35634-12 EcoTestr™ Salt1 Waterproof Pocket Tester by Oakton

Designed to be durable and easy to use

These economical, simple-to-use pocket testers quickly measure conductivity, TDS, or salinity levels accurately while simultaneously displaying the temperature. A large dual-line display makes viewing measurements easy and features indicators for measurement stability, calibration, and battery life.

Additional features include a long-lasting, durable electrode with polymer reference electrolyte, auto recognition of calibration standards, and self-diagnostics. The IP67-rated housing features an easy-to-grip design and floats if accidentally dropped in water when sensor cap is on. The testers, powered by four AAA batteries, can operate up to 400 hours continuously. The unit will auto power-off after 8 minutes of nonuse to conserve power.

• View measurements clearly on large LCD
• Rugged IP67-rated housing is waterproof, dustproof, and floats in water
• Leakproof cap with fill line functions as a sample/calibration and hydrating cup
• Secure attach a lanyard to prevent losing or dropping in the field
• Auto shutoff extends battery life

WD-00652-20 Traceable® Conductivity and TDS Standard, Batch-Tested, 1 μS; 500 mL by Oakton

• Oakton® Traceable® conductivity and TDS standards have detailed labels: KCl, NaCl, and 442 conversions, temperature corrections, and certified values referenced to 25°C-convenient!!
• Average accuracy at 25°C is ±0.25 microsiemens for 1, 5, 10 microsiemen (μS) solutions, or ±0.25% for all other solutions. The tested uncertainty is shown on the certificate, whichever is greater
• Conductivity options range from 1 to 200,000 μS/cm
• Batch-tested solutions are lot certified; a few bottles from a single lot are analyzed

METHODS SUPPORTED

Certified reference material meets test requirements for Federal, State, and local agencies, CAP, ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA, AWWA, WEF, USGS, USP, and ISO. Traceable® Conductivity Standards complies with and is essential for use in these official methods: AOAC 973.40, EPA 120.1, Standard Method 2510 (APHA, AWWA, WEF), ISO 7888, DIN 38404, ASTM D1125, USGS I-1780, USP 645, and for A2LA/NVLAP accreditations/ISO 9000 certifications. Material may be used to calibrate all conductivity meters and to determine all conductivity cell constants.

A2LA ACCREDITATION ISO/IEC 17025:2005 (1750.01)

To assure accuracy an individually serial-numbered Traceable® Certificate is supplied to indicate traceability to standards provided by NIST (National Institute of Standards and Technology) and/or a National Standards Laboratory. A2LA accredited certification provides the highest achievable level of quality assurance, documentation, and accuracy. Conductivity Standards are produced in an A2LA accredited ISO/IEC 17025:2005 (1750.01) calibration laboratory. Additional certifications include ISO 31 (certificate content) and ISO 35 (statistical analysis), plus ISO 9001 (certified quality manufacturer).

• All Oakton® Traceable® conductivity standards are NIST-traceable reference materials
• Supplied with a calibration report from an ISO 17034 and ISO 17025 accredited laboratory
• These standard solutions let you calibrate conductivity instruments to ensure accuracy
• If unopened, shelf life is one year; once opened, shelf life will vary by solution value
• Use when readings are expected to be around 1 μS/cm

INCLUDES

temperature compensation chart, TDS conversion chart, and NIST-traceable calibration certificate with data.

Part Number: 600DV

AI101G GS1 pH Pen Tester Kit by Apera

GroStar® Premium Pen Testers are designed specifically for the horticultural market. GroStar's intelligent design reduces the guesswork so you can easily manage your crops success.

Features of GS1 Premium pH Pen:

• Measures pH and temperature
• Premium probe technologies and materials ensure high accuracy and durability with minimal maintenance
• Easy-to-use design and fast calibration adjustment
• Double junction replaceable probe, so you don't have to discard the entire pen when the probe reaches its end of life
• Large 3-color backlit screen gives you clear information
• IP67 waterproof rating
• Powered by AAA batteries with auto off function
• Automatic temperature compensation

Includes:

• 2-year warranty (instrument)
• 1-year warranty (probe)
• pH 7 & pH4 calibration solution (50ml bottle each)
• KCL storage solution (10ml bottle)
• Lanyard and user manual