$100 - $150

Old Part Number: 101675
New Part Number: J101675PA

M027-0001-112 UNILite MP112 Disposable Single Gas Detector, H2S, 100 PPM Range, 0.1 Resolution, Run time remaining Display (Min. Order 100) by mPower Electronics

The UNI Lite MP112 is a disposable or maintenance-free version of carbon monoxide (CO) and hydrogen sulfide (H2S) single gas detectors with up to 2 years continual operation. The detectors have large LCDs providing maximum readability in the field and are made with six bright red LEDs allowing for quick alarm notification. Constructed of strong and durable material, the UNI Lite is designed to be comfortable yet drop-resistant. The UNI Lite can easily be bump tested and calibrated either manually or using the 4-Bay CaliCase docking station.

Features, Functions and Benefits

• Simple one-button GO, NO-GO!
• Large LCD
• 4-size CO and H2S sensors
• 50 events logging
• IP rating: IP-67
• Low & High alarms
• Six bright red flashing LEDs
• 2/3 AA Lithium battery
• No maintenance or part replacement

M027-0002-112 UNILite MP112 Disposable Single Gas Detector, H2S, 100 PPM Range, 0.1 Resolution, Run time remaining Display (Min. Order 100) by mPower Electronics

The UNI Lite MP112 is a disposable or maintenance-free version of carbon monoxide (CO) and hydrogen sulfide (H2S) single gas detectors with up to 2 years continual operation. The detectors have large LCDs providing maximum readability in the field and are made with six bright red LEDs allowing for quick alarm notification. Constructed of strong and durable material, the UNI Lite is designed to be comfortable yet drop-resistant. The UNI Lite can easily be bump tested and calibrated either manually or using the 4-Bay CaliCase docking station.

Features, Functions and Benefits

• Simple one-button GO, NO-GO!
• Large LCD
• 4-size CO and H2S sensors
• 50 events logging
• IP rating: IP-67
• Low & High alarms
• Six bright red flashing LEDs
• 2/3 AA Lithium battery
• No maintenance or part replacement

MC410 TDS - PPM Monitor by Milwaukee

The MC Monitors are designed to continuously monitor pH, EC or TDS values directly in your reservoir. Each unit features a user selectable set-point. An LED visual alarm is activated and flashes when the pH, EC or TDS level rises either Above or Below (user selected) that set-point.

All these instruments run on a 12V adapter so there's no need to worry about failed batteries and each unit comes with mounting kit, probe, probe holder and starter calibration solution.

• User selectable Hi/Low Set Point
• Manual 1 points calibration
• Visual LED alarm
• Supplied with 12 VDC adapter, mounting kit, and 20ml 1382ppm calibration solution
• MA81/2 PPM Probe with 2m cable (BNC connector)

PM1H000001SE Be Safe Single Gas Personal Monitor, Sensor: H2S, Range 0-100 ppm by Seitron Americas

Be Safe SG is the new portable single gas detector, designed to be compact, robust and easy to use. Configurable for 1 gas including O2, CO, H2S or SO2, it can be used in hazardous areas with explosion risk.

Portable Gas Detector

• 24 months of continuous operation
• Reliable detection of low concentrations of toxic and flammable gases
• Durable and easy to operate
• Integrated alligator clip
• Intrinsically safe
• Self-test function
• Event log storage
• Approved for ATEX Zone 0

Be Safe SG Kit includes:

• Portable gas detector
• Calibration cap
• Quick Guide
• Test report
• Declaration of conformity ATEX and IECEx

• INCREASED SAFETY: Built-in audible, vibration and visual alarms for an immediate danger warning.
• SOLID AND RELIABLE: The rugged and solid housing ensures precise and safe detection in all environments.
• CONTINUOUS PROTECTION: Designed to guarantee continuous operation for 24 months without any need to replace sensors or battery.
• EASY TO USE: Designed from the ground up to ensure the greatest ease of use and intuitiveness possible.

SB-7250-P-PK Bottle, Nalgene Sample Bottle 250 mL, 12/pk by AquaPhoenix

Nalgene® Wide-Mouth HDPE bottles are durable, translucent and leakproof. These general-purpose bottles are ideal for collecting samples in the lab or field. Available in 250 or 500 mL.

Part Number: 34L-311

Weight: 5 lbs.

Part Number: 34L-303

GCT-IR-LINK GCT IR Link Comm Module (For all monitors) with USB Cable by Gas Clip Technologies

Gas Clip Technologies IR Link is an effective tool for communicating with all Gas Clip Technologies products. In conjunction with our instrument specific software, the IR Link can be used to both program and retrieve information from the instruments. The IR Link requires a USB port and respective software in order to properly operate.

Gas Clip Technologies IR Link software provides users the ability to communicate and program the Single Gas Clip or SGC Plus units individually. In order to communicate with the instruments, an IR Link is required. Once installed, users will be able to change instrument settings, download unit event logs and upgrade firmware. Following is a full list of features offered by the IR Link software:

• High Alarm
• Low Alarm
• Calibration Interval
• Bump Interval
• User ID
• Self Test Interval
• Show Sensor Readings
• Hide Bump Due LED flashing
• Hide Clock
• Hibernate
• Save Event Log
• Model Number: GCT-IR-LINK

Part Number: CP-SF1

Part Number: 34L-176-0.66

Preset Flow Regulator

The 500 Series regulators are single-stage, piston-style, regulators designed to deliver a preset flow of non-reactive and low-level reactive (less than 100 PPM)* gas mixtures from 58 liter and 103 liter non-refillable cylinders having a 5/8 -18 UNF (C-10) inlet connection.

*Low-level reactive gases slowly react with the wetted brass parts of the 500 Series regulators. In order to minimize loss of calibration accuracy, the regulator must be removed from the cylinder after each use. Norlab s 6000 Series regulator is recommended for extended use with reactive calibration gas mixtures.

Part Number: 515

BW-CONNECT Honeywell BW Connect Wireless Adapter by BW Technologies

With the new Honeywell BW™ Connect you can transform your dependable BW gas detectors into wireless devices in the blink of an eye - this adapter can be attached quickly to your current detectors and paired with any available smartphone via Bluetooth®.

An easy-to-use cost-effective addition compatible with the Honeywell Safety Communicator App, Honeywell BW™ Connect grants real-time visibility of your workers' safety status and location so you have confidence that you can maintain complete situational awareness and full compliance.

Affordable

With the Honeywell BW™ Connect, customers can get wireless gas detection - without buying a wireless detector at a fraction of the cost. The BW Connect works with existing smartphones by downloading the Honeywell Safety Communicator App.

Compatible

Honeywell BW™ Connect is compatible with the following multi-gas detectors:

• Honeywell BW™ MicroClip XL
• Honeywell BW™ MicroClip X3
• Honeywell BW™ Max XT II

Reliable and Compliant

Honeywell is giving compliance-focused customers an easy, affordable way to bring connectivity to their existing fleet of reliable BW multi-gas detectors. With the BW Connect, workers have real time situational awareness with real time visibility on gas detectors to proactively ensure safety, compliance and productivity.

• Monitor gas detector readings from anywhere with real-time monitoring software
• More accurate decisions knowing the location of the worker
• Alarm notifications
• Compliance level, notification of bump and calibration level provided through software

Features & Benefits

• 1-year runtime (non-replaceable battery) disposable IRDA to BLE adapter which allows existing BW instruments to become IoT-enabled devices and instantly kick start the Connected Worker ecosystem.
• Global intrinsic safety and wireless certifications

Part Number: BW-CONNECT

Part Number: 34L-50-300

Part Number: 34L-390

375 Combination Non-contact (IR) and Contact Thermometer by Test Products International

Thoroughly testing and diagnosing high efficiency HVACR systems or large surface areas can be labor intensive and expensive. Using the appropriate non-contact thermometer can reduce man hours and help insure system performance more easily, accurately and affordably.

Features:

• Laser pointer
• Record function (Min/Max)
• Display data hold function
• Back light
• Trigger switch
• 8:1 distance to spot ratio
• °C and °F selectable
• Gun-type compact design
• Operating lock function
• 9V battery and soft pouch included

Applications

• Heating & AC/R system measurements on all non-metallic and many metallic surfaces
• Troubleshoot overheating devices
• Remote Vent and return temperature measurements
• Tubing, piping and sheet metal temperature