$100 - $150

Part Number: CGT1031

765PTAC Thermocouple Panel Thermometer, Type PTA, Range -50.00 to 199.9 °C by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of ± 0.2%, features a bright red LED display and 1/8 DIN plastic housing. °C/°F selectable via plastic jumper behind front bezel. Available in types. J, K, T, E, and 3-wire Pt-100 RTD. Ambient range 0 to 60°C. 115/230V AC operation.

• High accuracy
• 50/60 hz rejection design
• Compact 1/8 DIN plastic case
• °C/°F selectable w/ re-calibration
• Models available for k,j,t,e pt-100
• Upscale break detection
• Cold junction consumption design
• 1mv/digit analog output
• Easy to install
• 0.56 high efficiency ide display

90 degree inserts to reduce protrusion when connecting sampling tube to Gas-Pro flow plate. Box of 10.

765KC Thermocouple Panel Thermometer, Type K, Range -105 to 1372 °C by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of ± 0.2%, features a bright red LED display and 1/8 DIN plastic housing. °C/°F selectable via plastic jumper behind front bezel. Available in types. J, K, T, E, and 3-wire Pt-100 RTD. Ambient range 0 to 60°C. 115/230V AC operation.

• High accuracy
• 50/60 hz rejection design
• Compact 1/8 DIN plastic case
• °C/°F selectable w/ re-calibration
• Models available for k,j,t,e pt-100
• Upscale break detection
• Cold junction consumption design
• 1mv/digit analog output
• Easy to install
• 0.56 high efficiency ide display

*Please note we can only ship RKI products to customers within the United States

765JF Thermocouple Panel Thermometer, Type J, Range -346°F to 1400°F by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of ± 0.2%, features a bright red LED display and 1/8 DIN plastic housing. °C/°F selectable via plastic jumper behind front bezel. Available in types. J, K, T, E, and 3-wire Pt-100 RTD. Ambient range 0 to 60°C. 115/230V AC operation.

• High accuracy
• 50/60 hz rejection design
• Compact 1/8 DIN plastic case
• °C/°F selectable w/ re-calibration
• Models available for k,j,t,e pt-100
• Upscale break detection
• Cold junction consumption design
• 1mv/digit analog output
• Easy to install
• 0.56 high efficiency ide display

608 Digital Manometer by Test Products International

Single input manometer with ±60inH2O range. Four units of measure: inH2O, mbar, KPa, PSI and mmH20. Backlight display.

The 608 digital manometer measures pressure or vacuum in four units of measure. Please follow manufacturers recommendations on all equipment being serviced with the 608.

Features:

• Single input with +/-60 H2O range
• Four units of measure (inH2O, mbar, KPa, PSI and mmH20)
• Display - 4 digit with backlight
• Auto Off: Conserve battery power
• Built in hanging hook and back magnets

Standard Accessories (Included):

• 9V Alkaline battery (A009A)
• Silicone Tubing (A774)

135 Manual Ranging DMM with Capacitance, 40uA Range, with Boot, Test Leads, and Manual by Test Products International

The 135 is a hand-held autoranging DMM. It features extra large numerals on the LCD, and Data Hold for all functions and ranges. The 135 is an affordable choice offering measurements in all of the basic electrical functions.

Features:

• Safety: Meets CE and IEC 1010 requirements. UL Listed to U.S. and Canadian Safety Standards.
• Large LCD:Easy to read at all angles and the majority of lighting levels. 4000 Count.
• Rubber Boot: Added protection when the instrument is dropped. (135NB does not include boot.)
• Multi-function: Measure all electrical characteristics with one meter.
• 0.5% DCV basic accuracy
• 0 to 750 ACV; max resolution 1mV
• 0 to 1,000 DCV; max resolution 0.1mV
• 0 to 40MΩ; max resolution 0.1Ω
• 0 to 10 amps AC/DC; 0.1uA resolution
• Data Hold
• cULus 61010-1
• CAT II - 1000V, CAT III - 600V

Applications:

• Thermocouples in furnaces and gas appliances
• Heat anticipator current in thermostats
• Line voltages
• Voltage of direct drive DC motors
• Control circuit voltage
• Motor run and start capacitors
• Flame safeguard control current
• Heating element resistance (continuity)
• Compressor winding resistance
• Contactor and relay coil resistance
• Continuity of wiring
• Temperature with optional temperature adapter

The 135 comes complete with the following accessories:

• 135 Instrument
• Rubber Boot
• Test Lead Set
• Battery
• Instruction Manual

Part Number: CG2J2.5X18.034AL

381F Non-Contact Infrared Thermometer by Test Products International

Thoroughly testing and diagnosing high efficiency HVACR systems or large surface areas can be labor intensive and expensive. Using the appropriate non-contact thermometer can reduce man hours and help insure system performance more easily, accurately and affordably.

Measure Hard-to-reach, sensitive, or large moving target areas. Use the 380, 381, and 383 to measure surface temperature and watch the LCD immediately display accurate data without the use of a probe.

Features

• Easy to use single button operation
• 0.1 resolution for best reading (380/381)
• Last reading hold
• Soft holster pouch included
• 8:1 distance to spot ratio
• Large, easy to read display
• °C and °F selectable
• 9V battery included

Application

• Vent air and return temperature measurements
• Tubing, piping and sheet metal temperature
• Leaks around cooler or freezer doors

HVAC/R

• Compressor heads
• Vents
Insulation
• leaks around cooler or freezer doors
• Steam traps
• Registers

Food

• Grill & surface temperatures
• Holding cabinets
• serving temperatures
• storage temperatures

Electrical

• Cables
• circuit breakers
• connections
• machinery
• motors
• transformers

GHS1209 Gas Cylinder Hazard Class Pictogram Label (1"), 1120/Pad by GHS Safety

Provide your employees with a quick and easy way to identify Personal Protective Equipment & Hazard Class requirements. GHS labels are manufactured on a high gloss paper stock with pressure sensitive adhesive for ease of application and longer durability. Designed to be used with you in house labeling system where color printing isn't an option.

Make clean, professional looking labels in minutes. Labels are printed in sheets and padded with a cardboard backer for ease of use. Each sheet is perforated to allow removal when completed.

Labels are sold in pads. 1" diameter labels come 1,120 labels per pad. 1/2" diameter labels come 1,820 per pad.