$100 - $150

SP565 Smart Hot Wire Anemometer by Test Products International

Hotwire air velocity probe with flip up telescopic sensor wand. Use with TPI Smart Probe App to display air velocity and air flow.

Feature/Benefits:

• Measure air velocity and temperature simultaneously
• Communicate with Android Smart Phone using Bluetooth LE and TPI App
• Record minimum, maximum & average
• Multiple measuring units: m/s, km/h, ft/min, knots, mile/h

Applications:

• Air velocity measurements in HVAC systems
• Air duct analysis to balance commercial and residential HVAC systems
• Fume hoods
• Floor registers
• Exhaust grills

Ranges:

• Air Velocity: 40 to 3900 fpm; 0.2 to 20 m/s
• Temperature: -5°F to 175°F (-20°C to 80°C)

18004-29 Traceable Temperature Bluetooth® Enabled Data Logger Compatible with TraceableGO™ App and TraceableLIVE® Cloud Service; Bottle Probe by Digi-Sense

Track environmental conditions of reagents, clinical samples, vaccines, pharmaceuticals, and food items during transport to any location - Bluetooth loggers monitor shipments while in transit. Compact, durable data loggers fit almost anywhere - even inside a small cooler.

Configure the data loggers from your device using the TraceableGO App to start; stop; change memory mode, unit preference, alarm setting, logging interval; and enable/disable alarm. When all the parameters are set, simply press START on the logger to begin monitoring. Once the shipment is delivered, double press START/STOP on the logger to enable Bluetooth and export the data to your device. You will get an immediate response to see if your contents have been exposed to conditions outside the set parameters.

Measurements are updated every 5 seconds with user-defined reading intervals from 1 minute to 12 hours in 1-minute steps. Logging duration is 227 days (7.5 months) on a 5-minute logging interval. Data loggers store up to 90 alarm events. Data logger displays current reading, Min/Max, and run time or alarm time. 18004-13 only: Display toggles between temperature and humidity measurements every 5 seconds.

You have the option to subscribe to cloud-based TraceableLIVE® service to upload data to cloud - ideal for tracking data from multiple loggers or to comply with regulatory agency requirements. The low-cost TraceableLIVE subscription provides unlimited trip data to be saved on the cloud as well as the ability to send a report to an email.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

Key Features

• Connect to your data via smartphone or tablet - any Bluetooth-enabled device - using a downloadable Bluetooth App
• View and download data with free TraceableGO App
• Data loggers store up to 90 alarm events
• Readings and setup parameters easily viewable on large 2" by 1" LCD
• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Temperature-buffered probe is ideal for monitoring vaccines or other important samples in transit

Includes

Two AAA batteries and NIST-traceable calibration certificate with data.

98768-52 Traceable Rapid-Response Folding Stem Thermometer with Calibration; 1 4.5" Stainless Steel Probe by Digi-Sense

These digital thermometers are ideal for food applications. The silver-impregnated coating is 99% effective, and 100% safe! The stainless-steel probe is resistant to both corrosion and chemicals. Fold-up penetration sensor protects both the user and the probe from damage.

Obtain a measurement within 0.9°C in seconds! The wide range covers 99% of routine temperature checks: -40.0 to 250.0°C, with a resolution of 0.1° and ±0.5°C accuracy from -20 to 250°C, ±1.0°C otherwise.

The IP65 rating is ideal for wet areas. Protected against splashes and minor jets of water (like those from a tap), and ideal for kitchen and lab use. A magnetic back lets you stick the thermometer in convenient locations; its compact, foldable size lets you put it in your pocket.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory|Rapid-response means readings within 0.9°C in 2 to 3 seconds|Foldable stem can be used at any angle|Use in messy and wet areas - antimicrobial coating and IP65 rated
• Thermometer is preset to Celsius

Includes

NIST-traceable calibration certificate with data and battery.

18523-03 Type J Thermocouple Inconel Probe Quick DisConnector, Dual with Std-Connector, 18" L, .188 Dia, Ungrounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for continuous monitoring
• Designed with ICONEL 600 sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

90433-85 Thermowell, 304 Stainless Steel, 24" Length, 1/2" Connection by Digi-Sense

To match your probe to a thermowell, first measure the distance from the probe's tip to the top of the thread (typical thread length is 0.5" for 1/2" NPT fittings). Next, match this length to the probe depth of the thermowell ("A" dimension). Other thermowell sizes and materials are available - call our Application Specialists for more information.

• Limited-Space Thermowell when you need a shorter insertion depth.
• Standard Thermowell for general-purpose applications.
• Heavy-Duty Thermowell for higher fluid velocity ratings.

Part Number: HU-FC-B

08135-04 TI.31 12 Bottom-Mount Bimetal Thermometer, 3" Dial, 12" L/50-550F/10-290C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

Key Features

• Greater temperature range
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw

*Please note we can only ship RKI products to customers within the United States

90492-02 Adjustable Angle Bimetal Thermometer, 3" Dial, 6" L/25-125F/-5-50C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

• Greater temperature range
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw

18524-93 Type J Ind Thermocouple Probe Probe 12" L, 12" Ext .250 Dia, Grounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• The probes can be installed with current housing without having to purchase a whole new industrial assembly or can also to directly inserted
• Response Time: 3.75 seconds or greater
• Each probe comes with ½" NPT insertion threads
• Probes are welded and sealed which allows for direct insertion into a vessel
• Custom designs or changes to this product are available upon request
• Each probe comes with a color coded ANSI stripped leads: type J-red/white, type K-red/yellow, type T-red/blue