$100 - $150

08009-16 ASTM Like Liquid-In-Glass Thermometer; 16F / High Softening Point, Total Immersion, 85 to 392F, Organic Liquid Fill by Digi-Sense

These thermometers are precision manufactured to conform to ASTM E-1 specifications except for not being mercury filled. Designed for use in quality control laboratories or when mercury filled thermometers can not be used but where ASTM standards are still needed. ASTM established thermometer standards suited for special applications, and assigned an ASTM number according to each specification.

Thermometers feature permanently fused markings, blue spirit liquid, white background glass; are also individually serial numbered.

• Designed for specific ASTM (American Society for Testing and Materials) test methods
• Nonmercury blue spirit liquid

Old Part Number: 107221
New Part Number: J107221VN

37401-00 Humidity/Temperature Pen; 20 to 95% RH, 32 to 122F by Digi-Sense

Pen displays relative humidity and temperature simultaneously. Unit automatically holds the maximum RH and temperature values since power-up in memory; simply press a button to recall.

• What's included: batteries, belt clip, and carrying pouch.

Old Part Number: 101310N
New Part Number: J101310VN

56B000801 Dipslide Holder for DI 10 Incubator by AquaPhoenix

Lovibond DI 10 Incubator Dipslide Holder, holds 12 dipslides

Dipslide Holder for the Lovibond DI 10 Incubator. Holds up to 12 dipslides.

18520-97 Type J Thermocouple Probe Quick Dis-connector, Dual with Std-Connector, 18" L, .188 Dia, Grounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for continuous monitoring
• Designed with 316 stainless steel sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

Old Part Number: 105550
New Part Number: J105550PA

SPD480 Phase Rotation Indicator by Test Products International

The TPI Model SPD480 Phase Rotation Indicator operates properly on variable frequency drives. Does not give false readings by pulsed waveforms.

Features

• Easy to operate - connect one lead to each phase
• Large alligator clips for easy connection to cables and bus bars
• Operates properly on variable frequency drives. Does not give false readings by pulsed waveforms
• Verify proper rotation on feeder extensions
• Determine phase rotation on secondary potential transformers

WD-17040-10 InnoCal NIST-Traceable Calibration; Pressure/Vacuum Gauge, Accuracy ?1% by Oakton

If your experiment or process relies on pressure and vacuum measurements, make sure these instruments remain precise through regular calibrations. InnoCal® performs NIST-traceable pressure calibrations on absolute, gauge, and vacuum measuring instruments from:

• Gauge, Absolute and Differential Pressure from 0 to 20,000 psig (1.38 mPa)
• Vacuum from 0 to 29.2 in. Hg (986 mBar)
• Barometric pressure from 700 to 1100 mBar

We can calibrate all styles of pressure and vacuum equipment including analog/dial gauges, digital gauges, transducers and transmitters, pressure calibrators, manometers, barometers, deadweight testers, and pressure comparators.

InnoCal services all major brands of pressure equipment including Ashcroft®, WIKA®, Crystal Engineering, Fluke®, Druck, GE Sensing, Cole-Parmer®, Extech®, 3D Instruments™, and many more!

To meet your calibration needs:

• All calibration certificates contain as-found and as-left data, estimated measurement uncertainties (emu's), and test uncertainty ratios (TUR's) at no additional cost!
• This NIST-traceable calibration allows you to confirm that the specific asset you purchase meets the manufacturer's published specification
• EPA, USDA, ISO, and GLP/GMPs standards require regular NIST-Traceable calibration of all test equipment being used in critical applications, FDA compliant
• Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays

All measurements reported are traceable to SI units via national standards maintained by NIST and performed in compliance with ANSI Z540, ISO17025, and MIL-STD-45662A.

InnoCal is accredited to ISO/IEC 17025 by the American Association for Laboratory Accreditation (A2LA) under certificate number 1746.01. This accreditation is your assurance that the calibration is performed in a qualified, controlled laboratory.

Calibrations on pressure and vacuum gauges are performed using direct comparison against ultra-precise quartz reference transducers. Pressure measurements can be taken up to 20,000 psi and vacuum measurements down to 29.2 inches of Mercury. The calibration consists of 5 points upscale and 5 points downscale across the range of the instrument.

TK2731-Z Chlorine FAS-DPD Test Kit, Free, 1 drop = 0.2 or 0.5 ppm (liquid potassium iodide) by AquaPhoenix

EndPoint ID test kits are packaged in a durable plastic case and include all reagents, equipment and instruction card to complete approximately 60-75 tests. Color coded reagent caps match the color bar on the instruction card for easy identification when running multiple tests and our photographic, step-by-step instructions keep testing simple and help users easily identify color changes.

39009-75 RTD Probe 0.188 D with Plug by Digi-Sense

These RTD assemblies consist of a single Low Range or High Range Wire Wound element constructed of 316 Stainless Steel sheath material, assembled together with an Aluminum screw cover connection head.

• 316 Stainless steel sheath material
• 1/2" X 1/2" NPT stainless steel hex nipple for head mounting fittings
• Aluminum screw cover connection head
• Low range or high range wire wound elements
• .00385° C temperature coefficient
• Custom built assemblies available upon request